Sid - konqueror, dolphin i gwenview w kde4 nie dzia

bartekkozak · Post autor: **bartekkozak** » 13 grudnia 2009, 13:09

Witam serdecznie.

Po aktualizacji jakiś tydzień temu, przestał działać Dolphin, Gwenview i Konqueror.

Przy próbie uruchomienia dolphina z konsoli, otrzymuję po dłuższej chwili:

Kod: Zaznacz cały

[13:02:17] barti@debian:~$ dolphin
<unknown program name>(3732)/: Communication problem with  "dolphin" , it probably crashed.
Error message was:  "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." "

[13:02:46] barti@debian:~$ "/usr/bin/dolphin(3733)" Error in thread 3048683808 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."

Po jakiś 5-10 minutach, Dolphin uruchamia się ale przy próbie zrobienia czegokolwiek, program się zawiesza, a w konsoli mam wynik:

Kod: Zaznacz cały

local socket error: QLocalSocket::SocketTimeoutError 
"/usr/bin/dolphin(3614)" Error in thread 3049134368 : "Command timed out."
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."                                           
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"                                                                           
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."                                           
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"                                                                           
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"                                                                           
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Invalid iterator."                                                                                                    
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."                                           
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"                                                                           
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Invalid iterator."
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3614)" Error in thread 3019598704 : "Invalid iterator."
"/usr/bin/konqueror(3620)" Error in thread 3051493664 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."

Jeśli chodzi o Gwenview, to przy próbie jego uruchomiania, z poziomu konsoli, otrzymuję:

Kod: Zaznacz cały

"/usr/bin/gwenview(3742)" Error in thread 3047421696 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."

Po jakimś czasie, Gwenview też się uruchamia i w konsoli widnieje komunikat:

Kod: Zaznacz cały

local socket error: QLocalSocket::SocketTimeoutError                                                                                                                         
"/usr/bin/dolphin(3733)" Error in thread 3048683808 : "Command timed out."                                                                                                   
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."                                           
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"                                                                           
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Invalid iterator."
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Invalid iterator."
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/dolphin(3733)" Error in thread 3019148144 : "Invalid iterator."
local socket error: QLocalSocket::SocketTimeoutError
"/usr/bin/gwenview(3742)" Error in thread 3047421696 : "Command timed out."
"/usr/bin/gwenview(3742)" Error in thread 3047421696 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/gwenview(3742)" Error in thread 3047421696 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/gwenview(3742)" Error in thread 3047421696 : "org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
"/usr/bin/gwenview(3742)" Error in thread 3047421696 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/gwenview(3742)" Error in thread 3047421696 : "Unsupported operation (2)": "Invalid model"
"/usr/bin/gwenview(3742)" Error in thread 3047421696 : "Invalid iterator."

Konqueror się uruchamia, strony działają, lecz gdy chcę odpalić jakikolwiek folder lokalny, następuje zwiecha programu.

Jak sobie poradzić z tym problemem? Macie jakieś pomysły?
Z góry dziękuję za pomoc, pozdrawiam.

iria · Post autor: **iria** » 13 grudnia 2009, 13:50

I przychodzisz po tygodniu?

Ostatnia aktualizacja KDE w Sidzie, była pod koniec tego tygodnia. Jesteś pewien, że została wykonana prawidłowo?

bartekkozak · Post autor: **bartekkozak** » 13 grudnia 2009, 13:59

iria pisze:I przychodzisz po tygodniu?

Próbowałem szukać w internecie roziwązania problemu...

iria pisze:Ostatnia aktualizacja KDE w Sidzie, była pod koniec tego tygodnia. Jesteś pewien, że została wykonana prawidłowo?

Po ostatniej aktualizacji , nic się nie zmieniło

iria · Post autor: **iria** » 13 grudnia 2009, 15:13

bartekkozak pisze:Próbowałem szukać w internecie roziwązania problemu...

To się chwali, ale teraz trudniej znaleźć przyczynę. ;-)

Zobacz jak zachowują się te programy, na koncie innego użytkownika i na koncie roota.

button · Post autor: **button** » 13 grudnia 2009, 15:59

Na pierwszy rzut oka wygląda na niedziałający interfejs loopback. Sprawdź poleceniem (z roota)

Kod: Zaznacz cały

ifconfig lo

czy interfejs jest podniesiony i działa.
Innego pomysłu na razie brak.

bartekkozak · Post autor: **bartekkozak** » 13 grudnia 2009, 16:22

button pisze: ifconfig lo

Kod: Zaznacz cały

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:220 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12040 (11.7 KiB)  TX bytes:12040 (11.7 KiB)

[Dodano: |13 Gru 2009|, 2009 16:32]

iria pisze:Zobacz jak zachowują się te programy, na koncie innego użytkownika i na koncie roota.

Kod: Zaznacz cały

debian:/home/barti# gwenview
No protocol specified
gwenview: cannot connect to X server :0.0

debian:/home/barti# dolphin
<unknown program name>(4700)/: KUniqueApplication: Cannot find the D-Bus session server:  "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."

<unknown program name>(4699)/: KUniqueApplication: Pipe closed unexpectedly.

debian:/home/barti# konqueror
No protocol specified
konqueror: cannot connect to X server :0.0

button · Post autor: **button** » 13 grudnia 2009, 16:49

Nie do końca mi pasuje ta Twoja aktualizacja KDE w Sidzie około tygodnia temu, bo pełna aktualizacja dostępna była niecałe 3 dni temu, więc pewnie zacząłeś aktualizować pakiety zanim wszystko wylądowało w repozytorium.

Co do problemu, to spróbuj wyłączyć nepomuka w ustawieniach systemowych (aplet Wyszukiwanie na pulpicie), można przeczytać, że kilku osobom pomogło może pomoże i Tobie.

Jeżeli nie, to może spróbuj jeszcze zmienić nazwę katalogu .kde w Twoim katalogu domowym(najlepiej z poziomu konsoli z wyłączonym KDE) i zresetować komputer.
Jeżeli to nie pomoże, to jeszcze wyczyściłbym pamięć podręczną apta z pobranych pakietów:

Kod: Zaznacz cały

apt-get clean

i następnie przeinstalował całe KDE.

PS. Teraz zauważyłem. Nie uruchamiaj tych programów z poziomu konta administratora. Dostajesz wtedy takie komunikaty jak wyżej

Kod: Zaznacz cały

cannot connect to X server :0.0

Iria (wolno odmieniać Twój nick? Chodziło raczej o to, żebyś założył nowe konto użytkownika i sprawdził, czy na nim te programy zachowują się tak samo.

iria · Post autor: **iria** » 13 grudnia 2009, 17:18

Mało precyzyjnie się wyraziłem. Jeśli chcemy program na prawach roota, to najlepiej uruchomić go za pomocą kdesu, które pewnie masz nieskonfigurowane, więc najprościej wydaj te polecenie z konta użytkownika:

Kod: Zaznacz cały

/usr/lib/kde4/libexec/kdesu dolphin

Ale najważniejsze, to sprawdzić na nowym użytkowniku, czy ma te same objawy.

button pisze:(wolno odmieniać Twój nick ? )

Nie mam nic przeciwko. ;-)

bartekkozak · Post autor: **bartekkozak** » 14 grudnia 2009, 20:05

button pisze:Co do problemu, to spróbuj wyłączyć nepomuka w ustawieniach systemowych (aplet Wyszukiwanie na pulpicie), można przeczytać, że kilku osobom pomogło może pomoże i Tobie.

Pomogło, ale znalazłem problem z HPLip toolbox

Kod: Zaznacz cały

[20:04:19] barti@debian:~$ hp-levels -g

HP Linux Imaging and Printing System (ver. 3.9.10)
Supply Levels Utility ver. 2.0                    

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.            
This is free software, and you are welcome to distribute it 
under certain conditions. See COPYING file for more details.

hp-levels[4211]: debug: getDeviceUri(None, None, ('hp',), None, , True)
hp-levels[4211]: debug: Mode=0                                         
hp-levels[4211]: debug: hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K: back_end:hp is_hp:True bus:usb model:Photosmart_C4500_series serial:CN8A6F30ZQ057K dev_file: host: zc: port:1                                                                                                                                                              
hp-levels[4211]: debug: Cache miss: photosmart_c4500_series                                                                                                                  
hp-levels[4211]: debug: Reading file: /usr/share/hplip/data/models/models.dat                                                                                                
hp-levels[4211]: debug: Searching for section [photosmart_c4500_series] in file /usr/share/hplip/data/models/models.dat                                                      
hp-levels[4211]: debug: Found section [photosmart_c4500_series] in file /usr/share/hplip/data/models/models.dat                                                              
hp-levels[4211]: debug: {'hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K': ['Photosmart-C4500-series']}                                                               
Using device: hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K                                                                                                          

hp-levels[4211]: debug: Device URI: hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K
hp-levels[4211]: debug: Printer: None                                                    
hp-levels[4211]: debug: Connecting to com.hplip.StatusService (try #1)...                
hp-levels[4211]: debug: Running hp-systray: /usr/share/hplip/systray.py --force-startup  
hp-levels[4211]: debug: Waiting for hp-systray to start...                               

HP Linux Imaging and Printing System (ver. 3.9.10)
System Tray Status Service ver. 2.0               

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.            
This is free software, and you are welcome to distribute it 
under certain conditions. See COPYING file for more details.

hp-levels[4211]: debug: Connecting to com.hplip.StatusService (try #2)...
hp-levels[4211]: debug: Connected.                                       
hp-levels[4211]: debug: hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K: back_end:hp is_hp:True bus:usb model:Photosmart_C4500_series serial:CN8A6F30ZQ057K dev_file: host: zc: port:1                                                                                                                                                              
hp-levels[4211]: debug: URI: backend=hp, is_hp=True, bus=usb, model=Photosmart_C4500_series, serial=CN8A6F30ZQ057K, dev=, host=, port=1                                      
hp-levels[4211]: debug: Model/UI model: Photosmart_C4500_series/HP Photosmart c4500 Series                                                                                   
hp-levels[4211]: debug: hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K: back_end:hp is_hp:True bus:usb model:Photosmart_C4500_series serial:CN8A6F30ZQ057K dev_file: host: zc: port:1                                                                                                                                                              
hp-levels[4211]: debug: Re-reading CUPS printer queue information.                                                                                                           
hp-levels[4211]: debug: Opening device: hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K (not for printing)                                                             
hp-levels[4211]: debug: I/O mode=3                                                                                                                                           
hp-levels[4211]: debug: device-id=1                                                                                                                                          
hp-levels[4211]: debug: Opened device: hp (backend=hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K, is_hp=True, bus=usb, model=Photosmart_C4500_series, dev=, serial=CN8A6F30ZQ057K, host=, port=1)                                                                                                                                                 
hp-levels[4211]: debug: Type 1/2 (S: or VSTATUS :) status                                                                                                                     
hp-levels[4211]: debug: num_pens = 2                                                                                                                                         
hp-levels[4211]: debug: pen 0 {'index': 0, 'kind': 3L, 'level': 50, 'ack': True, 'hp-ink': False, 'dvc': 15850L, 'level-trigger': 0, 'virgin': True, 'health': 0, 'known': False, 'type': 1, 'id': 16}                                                                                                                                                    
hp-levels[4211]: debug: pen 1 {'index': 1, 'kind': 3L, 'level': 70, 'ack': True, 'hp-ink': False, 'dvc': 4920L, 'level-trigger': 0, 'virgin': True, 'health': 0, 'known': False, 'type': 2, 'id': 17}                                                                                                                                                     
hp-levels[4211]: debug: {'photo-tray': 0L, 'in-tray2': False, 'top-door': 1L, 'in-tray1': True, 'agents': [{'index': 0, 'kind': 3L, 'level': 50, 'ack': True, 'hp-ink': False, 'dvc': 15850L, 'level-trigger': 0, 'virgin': True, 'health': 0, 'known': False, 'type': 1, 'id': 16}, {'index': 1, 'kind': 3L, 'level': 70, 'ack': True, 'hp-ink': False, 'dvc': 4920L, 'level-trigger': 0, 'virgin': True, 'health': 0, 'known': False, 'type': 2, 'id': 17}], 'duplexer': 0L, 'supply-door': 0L, 'revision': 3, 'media-path': 3L, 'status-code': 1000}                                                                                                                                                             
hp-levels[4211]: debug: Sending event 1000 to hpssd...                                                                                                                       
hp-levels[4211]: debug: Dynamic counters: 1                                                                                                                                  
hp-levels[4211]: debug: Closing device...                                                                                                                                    
hp-levels[4211]: debug: Result-code = 0                                                                                                                                      
hp-levels[4211]: debug: Opening device: hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K (for printing)                                                                 
hp-levels[4211]: debug: I/O mode=1                                                                                                                                           
hp-levels[4211]: debug: device-id=1                                                                                                                                          
hp-levels[4211]: debug: Opened device: hp (backend=hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K, is_hp=True, bus=usb, model=Photosmart_C4500_series, dev=, serial=CN8A6F30ZQ057K, host=, port=1)                                                                                                                                                 
hp-levels[4211]: debug: Opening PRINT channel...                                                                                                                             
hp-levels[4211]: debug: channel-id=2                                                                                                                                         
hp-levels[4211]: debug: Writing 65 bytes to channel 2 (device-id=1)...                                                                                                       
hp-levels[4211]: debug: Result code=0                                                                                                                                        
hp-levels[4211]: debug: Writing 65 bytes to channel 2 (device-id=1)...                                                                                                       
hp-levels[4211]: debug: Result code=0                                                                                                                                        
hp-levels[4211]: debug: r_value=2000004                                                                                                                                      
hp-levels[4211]: debug: Closing PRINT channel...                                                                                                                             
hp-levels[4211]: debug: Looking for kind=3, type=1...                                                                                                                        
hp-levels[4211]: debug: found: r4-kind3-type1                                                                                                                                
hp-levels[4211]: debug: health=0, level=50, level_trigger=0, status_code=1000                                                                                                
hp-levels[4211]: debug: Looking for kind=3, type=2...                                                                                                                        
hp-levels[4211]: debug: found: r4-kind3-type2                                                                                                                                
hp-levels[4211]: debug: health=0, level=70, level_trigger=0, status_code=1000                                                                                                
hp-levels[4211]: debug: Looking for kind=3, type=3...                                                                                                                        
hp-levels[4211]: debug: Not found: 3                                                                                                                                         
hp-levels[4211]: debug: {'cups-printers': ['Photosmart-C4500-series'], 'agent1-kind': 3L, 'agent1-hp-ink': False, 'scan-uri': 'hpaio:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K', 'agent2-type': 2, 'agent2-hp-ink': False, 'agent2-ack': False, 'is-hp': True, 'agent1-level': 50, 'top-door': 1L, 'in-tray1': True, 'serial': 'CN8A6F30ZQ057K', 'back-end': 'hp', 'agent2-health-desc': 'Good/OK', 'agent1-dvc': 0, 'device-uri': 'hp:/usb/Photosmart_C4500_series?serial=CN8A6F30ZQ057K', 'rr': '000004', 'photo-tray': 0L, 'panel-line1': '', 'panel-line2': '', 'agent2-sku': '351/351XL', 'port': 1, 'agent2-level-trigger': 0, 'rg': '002', 'agent2-desc': 'Tri-color cartridge', 'agent1-known': False, 'agent1-health': 0, 'status-code': 1000, 'revision': 3, 'dev-file': '', 'status-desc': 'Idle', 'agent2-virgin': False, 'agent1-health-desc': 'Good/OK', 'agent2-dvc': 0, 'agent2-kind': 3L, 'host': '', 'agent2-health': 0, 'agent2-known': False, 'agent1-id': 0, 'agent2-level': 70, 'error-state': 0, 'device-state': 1, 'panel': 0, 'in-tray2': False, 'agent1-ack': False, 'agent1-virgin': False, 'agent1-level-trigger': 0, 'rs': '002000004', 'agent2-id': 0, 'agent1-type': 1, 'agent1-desc': 'Black cartridge', 'r': 4, 'deviceid': 'MFG:HP]: debug: 1: agent_type 1 agent_kind 3 agent_sku '350/350XL'
hp-levels[4211]: debug: 2: agent_type 2 agent_kind 3 agent_sku '351/351XL'
Black cartridge
Part No.: 350/350XL
Health: Good/OK

------------------------------------------------------------------------------------------------------------------------------------------
|/////////////////////////////////////////////////////////////////////                                                                   | (approx. 50%)
------------------------------------------------------------------------------------------------------------------------------------------

Tri-color cartridge
Part No.: 351/351XL
Health: Good/OK

------------------------------------------------------------------------------------------------------------------------------------------
|////////////////////////////////////////////////////////////////////////////////////////////////                                        | (approx. 70%)
------------------------------------------------------------------------------------------------------------------------------------------

hp-levels[4211]: debug: Closing device...
hp-levels[4211]: debug: Result-code = 0

Done.

Sid - konqueror, dolphin i gwenview w kde4 nie dzia

Sid - konqueror, dolphin i gwenview w kde4 nie działają