[+] Wyst
Kod: Zaznacz cały
linux-kbuild-$(uname -r)Nowego nie ma w repozytorium:
Kod: Zaznacz cały
uname -r
2.6.32-bpo.3-686
apt-cache policy linux-kbuild-$(uname -r)
W: Nie udało się odnaleźć pakietu linux-kbuild-2.6.32-bpo.3-686Kod: Zaznacz cały
update-initramfs -k 2.6.32-bpo.3-686 -c -uZainstalowałam pakiet do nowej wersji jądra:
było bodajże w backporatch
wygenerowałam initrd dla odpowiedniego jądra
i nic nie pomogło
Kod: Zaznacz cały
i linux-kbuild-2.6.26 - Kbuild infrastructure for Linux 2.6.26
i linux-kbuild-2.6.30 - Kbuild infrastructure for Linux 2.6.30
wygenerowałam initrd dla odpowiedniego jądra
i nic nie pomogło
Przedstaw teraz wynik tego błędu (po wygenerowaniu initrd) i plik: po przynajmniej dwóch próbach uruchomienia na nowym jądrze.
Ps. Może zamiast wersji 2.6.30, zainstaluj najnowszą wersję dostępną w backporatch 2.6.32-bpo.3-686?
Do wersji 2.6.30 jest:
Kod: Zaznacz cały
/var/log/Xorg.0.logPs. Może zamiast wersji 2.6.30, zainstaluj najnowszą wersję dostępną w backporatch 2.6.32-bpo.3-686?
Do wersji 2.6.30 jest:
Kod: Zaznacz cały
apt-cache policy linux-kbuild-2.6.30
linux-kbuild-2.6.30:
Zainstalowana: (brak)
Kandydująca: 2.6.30-1~bpo50+1
Tabela wersji:
2.6.30-1~bpo50+1 0
1 http://www.backports.org lenny-backports/main PackagesPo wygenerowaniu initrd nie ma żadnego błędu tylko podczas uruchamiania systemu:fnmirk pisze:Przedstaw teraz wynik tego błędu (po wygenerowaniu initrd)
Kod: Zaznacz cały
Discovering multipathd...
mount: mounting /dev/sda2 on /root failed: Device or resource busy
mount: mounting /dev on /root/dev failed: no such file or directory
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /proc on /root/proc failed: no such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init= bootarg.
BusyBox v1.10.2 (debian 1:1.10.2-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned offKod: Zaznacz cały
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2)
Current Operating System: Linux debian 2.6.26-2-686 #1 SMP Tue Mar 9 17:35:51 UTC 2010 i686
Build Date: 08 June 2009 09:12:57AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 7 09:11:29 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e38c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1019,0f71 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1019,0f71 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1019,0f71 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1019,0f71 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1019,0f71 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1019,0f71 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1019,0f71 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1019,2f71 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1019,0f71 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1019,0f71 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1019,0f71 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1019,0f71 rev 02 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 10ec,8168 card 1019,0f71 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:28:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:1), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xfea80000/19, 0xd0000000/28, 0xfea40000/18, I/O @ 0xdc00/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xfe980000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B]
[1] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B]
[2] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B]
[3] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[B](B)
[4] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B)
[5] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[6] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B)
[7] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[8] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[9] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[17] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B]
[1] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B]
[2] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B]
[3] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[B](B)
[4] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B)
[5] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[6] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B)
[7] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[8] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[9] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[10] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[11] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[17] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B]
[5] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B]
[6] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B]
[7] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[B](B)
[8] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[14] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[23] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched intel from file name intel.ids in autoconfig
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B]
[5] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B]
[6] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B]
[7] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[B](B)
[8] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[14] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[23] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B]
[5] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B]
[6] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B]
[7] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[B](B)
[8] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[17] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[24] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B]
[25] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[26] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B]
[27] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B)
[28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFEA80000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(==) intel(0): Enabling EXA render acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LCD", prod id 22528
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LCD", prod id 22528
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfea40000 - 0xfea7ffff (0x40000) MS[B]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[B]
[2] 0 0 0xfea80000 - 0xfeafffff (0x80000) MS[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B]
[8] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B]
[9] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B]
[10] -1 0 0xfe980000 - 0xfe9fffff (0x80000) MX[B](B)
[11] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[13] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[17] 0 0 0x0000dc00 - 0x0000dc07 (0x8) IS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[21] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[22] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[28] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B]
[29] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[30] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B]
[31] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 489216 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1956860 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfea80000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd1000000, handle = 0xd1000000
(II) intel(0): [drm] mapped back buffer at 0xd4000000, handle = 0xd4000000
(II) intel(0): [drm] mapped depth buffer at 0xd5000000, handle = 0xd5000000
(II) intel(0): [drm] mapped classic textures at 0xd6000000, handle = 0xd6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
)
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 332 x 208
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "pl"
(**) Generic Keyboard: XkbLayout: "pl"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) SynPS/2 Synaptics TouchPad auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: MOUSE)
(--) SynPS/2 Synaptics TouchPad auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(--) SynPS/2 Synaptics TouchPad touchpad found
Na poprzednim kernelu system uruchamia się w dalszym ciągu poprawnie? Jeśli tak, to po podniesieniu na nim systemu pokaż wynik
oraz
Pomocny może okazać się również wynik z
Kod: Zaznacz cały
mountKod: Zaznacz cały
cat /boot/grub/menu.lstKod: Zaznacz cały
dmesgOprócz poleceń, o które prosi mariaczi wykonaj poniższe kroki.
Uruchom system i zainstaluj pakiet:
Następnie jako root wydaj polecenie:i wklej jego wynik.
Uruchom system i zainstaluj pakiet:
Kod: Zaznacz cały
libblkid1Kod: Zaznacz cały
blkidmount
cat /boot/grub/menu.lst
dmesg
blkid
Kod: Zaznacz cały
/dev/sda2 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)Kod: Zaznacz cały
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=573da9a3-6c6f-42d3-9c69-dbfefaf338d9 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,1)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(single-user mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Debian GNU/Linux, kernel 2.6.32-bpo.3-686
root (hd0,1)
kernel /boot/vmlinuz-2.6.32-bpo.3-686 root=UUID=573da9a3-6c6f-42d3-9c69-dbfefaf338d9 ro
initrd /boot/initrd.img-2.6.32-bpo.3-686
title Debian GNU/Linux, kernel 2.6.32-bpo.3-686 (single-user mode)
root (hd0,1)
kernel /boot/vmlinuz-2.6.32-bpo.3-686 root=UUID=573da9a3-6c6f-42d3-9c69-dbfefaf338d9 ro single
initrd /boot/initrd.img-2.6.32-bpo.3-686
title Debian GNU/Linux, kernel 2.6.30-bpo.2-686
root (hd0,1)
kernel /boot/vmlinuz-2.6.30-bpo.2-686 root=UUID=573da9a3-6c6f-42d3-9c69-dbfefaf338d9 ro
initrd /boot/initrd.img-2.6.30-bpo.2-686
title Debian GNU/Linux, kernel 2.6.30-bpo.2-686 (single-user mode)
root (hd0,1)
kernel /boot/vmlinuz-2.6.30-bpo.2-686 root=UUID=573da9a3-6c6f-42d3-9c69-dbfefaf338d9 ro single
initrd /boot/initrd.img-2.6.30-bpo.2-686
title Debian GNU/Linux, kernel 2.6.26-2-686
root (hd0,1)
kernel /boot/vmlinuz-2.6.26-2-686 root=UUID=573da9a3-6c6f-42d3-9c69-dbfefaf338d9 ro
initrd /boot/initrd.img-2.6.26-2-686
title Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode)
root (hd0,1)
kernel /boot/vmlinuz-2.6.26-2-686 root=UUID=573da9a3-6c6f-42d3-9c69-dbfefaf338d9 ro single
initrd /boot/initrd.img-2.6.26-2-686
### END DEBIAN AUTOMAGIC KERNELS LIST
debian:/home/szatyna8#
Kod: Zaznacz cały
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny4) ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Tue Mar 9 17:35:51 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7d0000 - 000000007f7de000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7de000 - 000000007f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 1143MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 522192) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 522192
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 522192
[ 0.000000] On node 0 totalpages: 522192
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2288 pages used for memmap
[ 0.000000] HighMem zone: 290528 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F8D30, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7F7D0000, 0038 (r1 A M I OEMRSDT 9000618 MSFT 97)
[ 0.000000] ACPI: FACP 7F7D0200, 0084 (r2 A M I OEMFACP 9000618 MSFT 97)
[ 0.000000] ACPI: DSDT 7F7D0430, 45C6 (r1 0ABHG 0ABHG008 8 INTL 2002026)
[ 0.000000] ACPI: FACS 7F7DE000, 0040
[ 0.000000] ACPI: APIC 7F7D0390, 005C (r1 A M I OEMAPIC 9000618 MSFT 97)
[ 0.000000] ACPI: MCFG 7F7D03F0, 003C (r1 A M I OEMMCFG 9000618 MSFT 97)
[ 0.000000] ACPI: OEMB 7F7DE040, 0066 (r1 A M I AMI_OEM 9000618 MSFT 97)
[ 0.000000] ACPI: ASF! 7F7D4A00, 0075 (r32 LEGEND I865PASF 1 INTL 2002026)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518112
[ 0.000000] Kernel command line: root=UUID=573da9a3-6c6f-42d3-9c69-dbfefaf338d9 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.098 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2060996k/2088768k available (1771k kernel code, 26556k reserved, 750k data, 244k init, 1171264k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02bac75 - 0xc0376620 ( 750 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02bac75 (1771 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084096] Calibrating delay using timer specific routine.. 3195.39 BogoMIPS (lpj=6390789)
[ 0.084271] Security Framework initialized
[ 0.084343] SELinux: Disabled at boot.
[ 0.084411] Capability LSM initialized
[ 0.084491] Mount-cache hash table entries: 512
[ 0.084740] Initializing cgroup subsys ns
[ 0.084809] Initializing cgroup subsys cpuacct
[ 0.084876] Initializing cgroup subsys devices
[ 0.084964] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.085068] CPU: L2 cache: 1024K
[ 0.085134] Intel machine check architecture supported.
[ 0.085206] Intel machine check reporting enabled on CPU#0.
[ 0.085276] using mwait in idle threads.
[ 0.085350] Checking 'hlt' instruction... OK.
[ 0.100527] SMP alternatives: switching to UP code
[ 0.106880] ACPI: Core revision 20080321
[ 0.120007] ENABLING IO-APIC IRQs
[ 0.120007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.159767] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08
[ 0.160010] Brought up 1 CPUs
[ 0.160010] Total of 1 processors activated (3195.39 BogoMIPS).
[ 0.160010] CPU0 attaching sched-domain:
[ 0.160010] domain 0: span 0
[ 0.160010] groups: 0
[ 0.160010] net_namespace: 660 bytes
[ 0.160010] Booting paravirtualized kernel on bare hardware
[ 0.160010] NET: Registered protocol family 16
[ 0.160010] ACPI: bus type pci registered
[ 0.160010] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.160010] PCI: Not using MMCONFIG.
[ 0.160010] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.160010] PCI: Using configuration type 1 for base access
[ 0.160010] Setting up standard PCI resources
[ 0.168010] ACPI: EC: Look up EC in DSDT
[ 0.173591] ACPI: Interpreter enabled
[ 0.173658] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.173923] ACPI: Using IOAPIC for interrupt routing
[ 0.174055] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.176011] PCI: BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources
[ 0.176011] PCI: Not using MMCONFIG.
[ 0.182830] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.182904] ACPI: EC: driver started in poll mode
[ 0.183076] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.183846] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.183853] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.183946] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.184379] PCI: Transparent bridge - 0000:00:1e.0
[ 0.184473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.184743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.184858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.194636] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.195280] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.195922] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.196566] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.197211] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.197943] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.198676] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.199410] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.200130] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 91, should be A5 [20080321]
[ 0.200325] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.200426] pnp: PnP ACPI init
[ 0.200493] ACPI: bus type pnp registered
[ 0.202696] pnp: PnP ACPI: found 12 devices
[ 0.202762] ACPI: ACPI bus type pnp unregistered
[ 0.202830] PnPBIOS: Disabled by ACPI PNP
[ 0.203168] PCI: Using ACPI for IRQ routing
[ 0.203533] hpet clockevent registered
[ 0.203538] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.203757] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.204873] ACPI: RTC can wake from S4
[ 0.204964] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.205046] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.205117] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.205188] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.205260] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.205334] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.205409] system 00:09: ioport range 0x22c-0x22f has been reserved
[ 0.205481] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.205572] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.205646] system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.205740] system 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 0.205817] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.205889] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 0.205962] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.206035] system 00:0b: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.236562] PCI: Bridge: 0000:00:1c.0
[ 0.236627] IO window: disabled.
[ 0.236693] MEM window: disabled.
[ 0.236758] PREFETCH window: disabled.
[ 0.236827] PCI: Bridge: 0000:00:1c.1
[ 0.236891] IO window: e000-efff
[ 0.236958] MEM window: 0xfeb00000-0xfebfffff
[ 0.237026] PREFETCH window: disabled.
[ 0.237094] PCI: Bridge: 0000:00:1e.0
[ 0.237158] IO window: disabled.
[ 0.237224] MEM window: disabled.
[ 0.237289] PREFETCH window: disabled.
[ 0.237380] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.237511] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.237530] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.237660] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.237671] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.237697] NET: Registered protocol family 2
[ 0.237866] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.238192] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.239168] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239738] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.240883] TCP reno registered
[ 0.241104] NET: Registered protocol family 1
[ 0.241314] checking if image is initramfs... it is
[ 0.704420] Switched to high resolution mode on CPU 0
[ 0.849555] Freeing initrd memory: 6070k freed
[ 0.850454] audit: initializing netlink socket (disabled)
[ 0.850540] type=2000 audit(1270229075.848:1): initialized
[ 0.850820] highmem bounce pool size: 64 pages
[ 0.850888] Total HugeTLB memory allocated, 0
[ 0.851043] VFS: Disk quotas dquot_6.5.1
[ 0.851136] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.851247] msgmni has been set to 1751
[ 0.851429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.851522] io scheduler noop registered
[ 0.851586] io scheduler anticipatory registered
[ 0.851653] io scheduler deadline registered
[ 0.851727] io scheduler cfq registered (default)
[ 0.851807] pci 0000:00:02.0: Boot video device
[ 0.851989] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.852019] assign_interrupt_mode Found MSI capability
[ 0.852019] Allocate Port Service[0000:00:1c.:p cie00]
[ 0.852019] Allocate Port Service[0000:00:1c.:p cie02]
[ 0.852090] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.852122] assign_interrupt_mode Found MSI capability
[ 0.852223] Allocate Port Service[0000:00:1c.1 :p cie00]
[ 0.852264] Allocate Port Service[0000:00:1c.1 :p cie02]
[ 0.852604] isapnp: Scanning for PnP cards...
[ 1.206145] isapnp: No Plug & Play device found
[ 1.208965] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.210953] brd: module loaded
[ 1.211121] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.211680] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.211808] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.211879] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.211947] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.212047] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.212115] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.212708] mice: PS/2 mouse device common for all mice
[ 1.212966] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.213053] rtc0: alarms up to one month
[ 1.213186] cpuidle: using governor ladder
[ 1.213252] cpuidle: using governor menu
[ 1.213319] No iBFT detected.
[ 1.213823] TCP cubic registered
[ 1.213889] NET: Registered protocol family 17
[ 1.213960] Using IPI No-Shortcut mode
[ 1.214246] registered taskstats version 1
[ 1.214448] rtc_cmos 00:03: setting system clock to 2010-04-02 17:24:37 UTC (1270229077)
[ 1.214670] Freeing unused kernel memory: 244k freed
[ 1.220723] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.316953] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.317202] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.324004] Marking TSC unstable due to: TSC halts in idle.
[ 1.331726] ACPI: LNXTHERM:00 is registered as thermal_zone0
[ 1.335509] ACPI: Thermal Zone [TZ0] (57 C)
[ 1.991041] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 1.991147] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1.991291] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.991634] eth0: RTL8168b/8111b at 0xf883e000, 00:19:21:01:63:9f, XID 38000000 IRQ 221
[ 2.046800] usbcore: registered new interface driver usbfs
[ 2.046908] usbcore: registered new interface driver hub
[ 2.047014] usbcore: registered new device driver usb
[ 2.056133] USB Universal Host Controller Interface driver v3.0
[ 2.056259] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.056396] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.056400] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.056607] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.056728] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
[ 2.056887] usb usb1: configuration #1 chosen from 1 choice
[ 2.056983] hub 1-0:1.0: USB hub found
[ 2.057053] hub 1-0:1.0: 2 ports detected
[ 2.128127] Uniform Multi-Platform E-IDE driver
[ 2.128202] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.160152] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.160230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.160321] usb usb1: Product: UHCI Host Controller
[ 2.160387] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.160457] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.160594] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.160730] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.160734] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.160827] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.160948] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 2.161100] usb usb2: configuration #1 chosen from 1 choice
[ 2.161195] hub 2-0:1.0: USB hub found
[ 2.161265] hub 2-0:1.0: 2 ports detected
[ 2.264149] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.264232] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.264322] usb usb2: Product: UHCI Host Controller
[ 2.264389] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.264459] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.264595] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.264731] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.264735] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.264828] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.264950] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
[ 2.265105] usb usb3: configuration #1 chosen from 1 choice
[ 2.265202] hub 3-0:1.0: USB hub found
[ 2.265271] hub 3-0:1.0: 2 ports detected
[ 2.368129] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.368209] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.368299] usb usb3: Product: UHCI Host Controller
[ 2.368366] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.368436] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.368547] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 2.368682] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.368686] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.368779] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.368900] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
[ 2.369057] usb usb4: configuration #1 chosen from 1 choice
[ 2.369154] hub 4-0:1.0: USB hub found
[ 2.369223] hub 4-0:1.0: 2 ports detected
[ 2.472097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.472170] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.472261] usb usb4: Product: UHCI Host Controller
[ 2.472328] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.472397] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.473366] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.473507] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.473511] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.473609] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.477601] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.477672] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.477680] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea37c00
[ 2.504043] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 2.516038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.516258] usb usb5: configuration #1 chosen from 1 choice
[ 2.516357] hub 5-0:1.0: USB hub found
[ 2.516428] hub 5-0:1.0: 8 ports detected
[ 2.572080] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 2.620146] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.620224] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.620314] usb usb5: Product: EHCI Host Controller
[ 2.620381] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 2.620451] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.623885] No dock devices found.
[ 2.632623] SCSI subsystem initialized
[ 2.642376] libata version 3.00 loaded.
[ 2.647107] ata_piix 0000:00:1f.2: version 2.12
[ 2.647133] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.647267] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.647519] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 2.647586] scsi0 : ata_piix
[ 2.647734] scsi1 : ata_piix
[ 2.649561] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.649635] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.816473] ata1.00: ATA-7: HTS541040G9SA00, MB2OC60R, max UDMA/100
[ 2.816549] ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.832512] ata1.00: configured for UDMA/100
[ 3.012461] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L532U, TI04, max UDMA/33
[ 3.044411] ata2.00: configured for UDMA/33
[ 3.044591] scsi 0:0:0:0: Direct-Access ATA HTS541040G9SA00 MB2O PQ: 0 ANSI: 5
[ 3.051289] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L532U TI04 PQ: 0 ANSI: 5
[ 3.083531] Driver 'sd' needs updating - please use bus_type methods
[ 3.083717] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 3.083810] sd 0:0:0:0: [sda] Write Protect is off
[ 3.083878] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.083912] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.084090] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 3.084180] sd 0:0:0:0: [sda] Write Protect is off
[ 3.084248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.084281] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.084377] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 3.110816] sda1 sda2
[ 3.110816] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.120857] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.120937] Uniform CD-ROM driver Revision: 3.20
[ 3.121089] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.128137] usb 5-7: new high speed USB device using ehci_hcd and address 3
[ 3.137554] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.138722] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.269624] usb 5-7: configuration #1 chosen from 1 choice
[ 3.270949] usb 5-7: New USB device found, idVendor=0bda, idProduct=8187
[ 3.271028] usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.271102] usb 5-7: Product: RTL8187_Wireless
[ 3.271169] usb 5-7: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 3.271239] usb 5-7: SerialNumber: 0015AF0A5A59
[ 3.402128] kjournald starting. Commit interval 5 seconds
[ 3.402128] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.508030] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 3.711084] usb 2-2: configuration #1 chosen from 1 choice
[ 3.717785] usb 2-2: New USB device found, idVendor=04d9, idProduct=0499
[ 3.717785] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.270033] udevd version 125 started
[ 6.289399] Linux agpgart interface v0.103
[ 6.294880] agpgart: Detected an Intel 945GM Chipset.
[ 6.295160] agpgart: Detected 7932K stolen memory.
[ 6.311650] agpgart: AGP aperture is 256M @ 0xd0000000
[ 6.772583] input: Power Button (FF) as /class/input/input1
[ 6.800070] ACPI: Power Button (FF) [PWRF]
[ 6.800241] input: Power Button (CM) as /class/input/input2
[ 6.828066] ACPI: Power Button (CM) [PWRB]
[ 6.828203] input: Lid Switch as /class/input/input3
[ 6.844133] ACPI: Lid Switch [LID0]
[ 7.709019] input: Video Bus as /class/input/input4
[ 7.736136] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.738870] ACPI: AC Adapter [ADP0] (on-line)
[ 7.749084] ACPI: Battery Slot [BAT0] (battery absent)
[ 8.129536] intel_rng: FWH not detected
[ 8.139589] usbcore: registered new interface driver hiddev
[ 8.178620] input: HID 04d9:0499 as /class/input/input5
[ 8.208058] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.1-2
[ 8.208321] usbcore: registered new interface driver usbhid
[ 8.208391] usbhid: v2.6:USB HID core driver
[ 8.407387] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 8.407541] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 8.440117] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[ 8.516179] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 8.689377] input: PC Speaker as /class/input/input6
[ 8.896390] phy0: Selected rate control algorithm 'pid'
[ 9.049801] phy0: hwaddr 00:15:af:0a:5a:59, rtl8187 V1 + rtl8225
[ 9.049896] usbcore: registered new interface driver rtl8187
[ 9.243011] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[ 9.272816] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 10.846812] EXT3 FS on sda2, internal journal
[ 11.361921] loop: module loaded
[ 11.472206] device-mapper: uevent: version 1.0.3
[ 11.472364] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected]
[ 11.475452] device-mapper: multipath: version 1.0.5 loaded
[ 11.507972] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 11.508186] device-mapper: table: 254:0: multipath: error getting device
[ 11.508259] device-mapper: ioctl: error adding target to table
[ 13.804113] r8169: eth0: link up
[ 13.804188] r8169: eth0: link up
[ 16.659870] NET: Registered protocol family 10
[ 16.660451] lo: Disabled Privacy Extensions
[ 17.597886] lp: driver loaded but no devices found
[ 17.626549] ppdev: user-space parallel port driver
[ 20.441186] device-mapper: table: 254:0: multipath: error getting device
[ 20.441186] device-mapper: ioctl: error adding target to table
[ 21.962430] Bluetooth: Core ver 2.11
[ 21.964065] NET: Registered protocol family 31
[ 21.964137] Bluetooth: HCI device and connection manager initialized
[ 21.964209] Bluetooth: HCI socket layer initialized
[ 22.027058] Bluetooth: L2CAP ver 2.9
[ 22.027128] Bluetooth: L2CAP socket layer initialized
[ 22.087210] Bluetooth: RFCOMM socket layer initialized
[ 22.087295] Bluetooth: RFCOMM TTY layer initialized
[ 22.087363] Bluetooth: RFCOMM ver 1.8
[ 26.707586] [drm] Initialized drm 1.1.0 20060810
[ 26.713378] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.713388] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 26.713477] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 30.945618] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.638921] tilda[3263]: segfault at 0 ip 0805012b sp bfffd7b0 error 4 in tilda[8048000+13000]
Kod: Zaznacz cały
/dev/sdb1: LABEL="SZATYNA8" UUID="F8E0-EE63" TYPE="vfat"
/dev/sda1: UUID="5e5d9369-0925-4b4e-b20c-6a0526c67a9a" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda2: UUID="573da9a3-6c6f-42d3-9c69-dbfefaf338d9" TYPE="ext3"
Przestaw jeszcze plik:
Kod: Zaznacz cały
cat /etc/fstab