Debian nie wykrywa drukarki sieciowej udost

[debianowiec]

Witam.
Mam problem ze znalezieniem drukarki sieciowej na Debianie. Zacznę od początku, mam na komputerze z Windows7 podłączoną drukarkę przez usb. We właściwościach drukarki udostępniłem ją. Przy próbie dodawanie drukarki sieciowej wpisuję adres IP, pod którym znajduje się udostępniona drukarka i po krótszym czasie dostaję komunikat:

Kod: Zaznacz cały

żadnej drukarki nie znaleziono pod tym adresem

Polecenia ping bez problemu dochodzą do hosta Windows7, sambę mam uruchomioną i bez problemu z Windowsa dostaję na Debiana. W czym może być problem że nie wykrywa mi drukarki, która jest udostępniona w Windows7?Dodane:

Witam.
W czym może być problem że nie wykrywa mi drukarki, która jest udostępniona w Windows7?

Udało mi się, ale problem nie zniknął do końca, problem mam w zainstalowaniu sterowników do swojej drukarki. Ściągnąłem sterowniki ze strony http://www.openprinting.org/printer/Xer ... haser_3117
i po próbie instalacji mam taki błąd:

Kod: Zaznacz cały

root@debian:/home/debian/Downloads# dir
openprinting-splix-2.0.0-2lsb3.2.i486.rpm
openprinting-splix-2.0.0-2lsb3.2.x86_64.rpm
root@debian:/home/debian/Downloads# rpm -i openprinting-splix-2.0.0-2lsb3.2.x86_64.rpm
rpm: RPM should not be used directly install RPM packages, use Alien instead!
rpm: However assuming you know what you are doing...
error: Failed dependencies:
    /bin/sh is needed by openprinting-splix-2.0.0-2lsb3.2.x86_64
    lsb >= 3.2 is needed by openprinting-splix-2.0.0-2lsb3.2.x86_64
root@debian:/home/debian/Downloads# 

Więc, według komunikatu co powyżej próbuje zainstalować lsb, ale i tu mam błędy:

Kod: Zaznacz cały

Do you want to continue [Y/n]? y
Setting up rsync (3.0.7-2) ...
update-rc.d: using dependency based boot sequencing
insserv: warning: script 'K01iptables' missing LSB tags and overrides
insserv: warning: script 'iptables.sh' missing LSB tags and overrides
insserv: warning: script 'iptables' missing LSB tags and overrides
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service iptables and rc.local if started
insserv:  loop involving service rc.local at depth 17
insserv:  loop involving service iptables at depth 1
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: warning: script 'K01iptables' missing LSB tags and overrides
insserv: warning: script 'iptables.sh' missing LSB tags and overrides
insserv: warning: script 'iptables' missing LSB tags and overrides
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service iptables and rc.local if started
insserv:  loop involving service rc.local at depth 17
insserv:  loop involving service iptables at depth 1
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: error processing rsync (--configure):
 subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of lsb-core:
 lsb-core depends on rsync; however:
  Package rsync is not configured yet.
dpkg: error processing lsb-core (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb-graphics:
 lsb-graphics depends on lsb-core; however:
  Package lsb-core is not configured yet.
dpkg: error processing lsb-graphics (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb-cxx:
 lsb-cxx depends on lsb-core; however:
  Package lsb-core is not configured yet.
dpkg: error processing lsb-cxx (--configure):
 dependency problems - leaving unconfigured
configured to not write apport reports
                                      configured to not write apport reports
 configured to not write apport reports
                                       configured to not write apport reports
  configured to not write apport reports
                                        dpkg: dependency problems prevent configuration of lsb-desktop:
 lsb-desktop depends on lsb-graphics; however:
  Package lsb-graphics is not configured yet.
dpkg: error processing lsb-desktop (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb:
 lsb depends on lsb-core; however:
  Package lsb-core is not configured yet.
 lsb depends on lsb-graphics; however:
  Package lsb-graphics is not configured yet.
 lsb depends on lsb-cxx; however:
  Package lsb-cxx is not configured yet.
 lsb depends on lsb-desktop; however:
  Package lsb-desktop is not configured yet.
dpkg: error processing lsb (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 rsync
 lsb-core
 lsb-graphics
 lsb-cxx
 lsb-desktop
 lsb
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@debian:/home/debian/Downloads# 

Coś za dużo mam błędów w tym moim ulubionym Debianie. W jaki sposób mi poradzicie zebym to rozwiązał?
Pozdrawiam.

[fnmirk]

Coś za dużo mam błędów w tym moim ulubionym Debianie.

Forum wcześniej przejrzałeś?
http://debian.linux.pl/threads/13294-Al ... ji-Debiana

Kiedy robiłeś aktualizację systemu?

[debianowiec]

Forum wcześniej przejrzałeś?
http://debian.linux.pl/threads/13294-Al ... ji-Debiana

Kiedy robiłeś aktualizację systemu?

Aktualizację systemu robię za każdym razem jak włączam serwer!
Po próbie:

Kod: Zaznacz cały

apt-get upgrade

wcześniej zrobiłem:

Kod: Zaznacz cały

apt-get update

bez problemów, to wyświetla:

Kod: Zaznacz cały

root@debian:/home/debian# apt-get upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
6 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]? y
Setting up rsync (3.0.7-2) ...
update-rc.d: using dependency based boot sequencing
insserv: warning: script 'K01iptables' missing LSB tags and overrides
insserv: warning: script 'iptables.sh' missing LSB tags and overrides
insserv: warning: script 'iptables' missing LSB tags and overrides
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service iptables and rc.local if started
insserv:  loop involving service rc.local at depth 17
insserv:  loop involving service iptables at depth 1
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: warning: script 'K01iptables' missing LSB tags and overrides
insserv: warning: script 'iptables.sh' missing LSB tags and overrides
insserv: warning: script 'iptables' missing LSB tags and overrides
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service iptables and rc.local if started
insserv:  loop involving service rc.local at depth 17
insserv:  loop involving service iptables at depth 1
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: error processing rsync (--configure):
 subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of lsb-core:
 lsb-core depends on rsync; however:
  Package rsync is not configured yet.
dpkg: error processing lsb-core (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb-graphics:
 lsb-graphics depends on lsb-core; however:
  Package lsb-core is not configured yet.
dpkg: error processing lsb-graphics (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb-cxx:
configured to not write apport reports
                                      configured to not write apport reports
                                                                             lsb-cxx depends on lsb-core; however:
  Package lsb-core is not configured yet.
dpkg: error processing lsb-cxx (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb-desktop:
 lsb-desktop depends on lsb-graphics; however:
  Package lsb-graphics is not configured yet.
configured to not write apport reports
                                      dpkg: error processing lsb-desktop (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb:
 lsb depends on lsb-core; however:
  Package lsb-core is not configured yet.
 lsb depends on lsb-graphics; however:
  Package lsb-graphics is not configured yet.
 lsb depends on lsb-cxx; however:
  Package lsb-cxx is not configured yet.
configured to not write apport reports
                                      configured to not write apport reports
                                                                             lsb depends on lsb-desktop; however:
  Package lsb-desktop is not configured yet.
dpkg: error processing lsb (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 rsync
 lsb-core
 lsb-graphics
 lsb-cxx
 lsb-desktop
 lsb
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@debian:/home/debian# dir
Desktop  Documents  Downloads  Music  Pictures    Public    Templates  Videos
root@debian:/home/debian# 

Już sam nie wiem co mam robić, wcześniej miałem ponad rok Fedorę i bez problemu mi wszystko działało (a błędy niwelowałem sam), a tu w Debianie błąd za błędem. Podaję zawartość pliku /etc/apt/sources.list:

Kod: Zaznacz cały

# deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official amd64 CD Binary-1 2011$

#deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official amd64 CD Binary-1 20110$


deb [url]http://ftp.pl.debian.org/debian/[/url] stable main non-free contrib
deb-src [url]http://ftp.pl.debian.org/debian/[/url] stable main non-free contrib
deb [url]http://security.debian.org/[/url] stable/updates main contrib non-free
deb-src [url]http://security.debian.org/[/url] stable/updates main contrib non-free

Bardzo prosiłbym o wskazówki co u mnie jest nie tak?

[fnmirk]

Kod: Zaznacz cały

dpkg: error processing lsb (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 rsync
 lsb-core
 lsb-graphics
 lsb-cxx
 lsb-desktop
 lsb
E: Sub-process /usr/bin/dpkg returned an error code (1)

To należy wcześniej naprawić.

Wykonaj:

Kod: Zaznacz cały

apt-get update
apt-get dist-upgrade -u

Przecież mamy nowe wydanie wersji stabilnej.

[debianowiec]

To należy naprawić wcześniej naprawić.

Wykonaj:

Kod: Zaznacz cały

apt-get update
apt-get dist-upgrade -u

Przecież mamy nowe wydanie wersji stabilnej.

Nic nie pomogło.

Kod: Zaznacz cały

root@debian:/home/debian# apt-get dist-upgrade -u
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
6 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]? y
Setting up rsync (3.0.7-2) ...
update-rc.d: using dependency based boot sequencing
insserv: warning: script 'K01iptables' missing LSB tags and overrides
insserv: warning: script 'iptables.sh' missing LSB tags and overrides
insserv: warning: script 'iptables' missing LSB tags and overrides
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service iptables and rc.local if started
insserv:  loop involving service rc.local at depth 17
insserv:  loop involving service iptables at depth 1
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: warning: script 'K01iptables' missing LSB tags and overrides
insserv: warning: script 'iptables.sh' missing LSB tags and overrides
insserv: warning: script 'iptables' missing LSB tags and overrides
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: There is a loop between service iptables and rc.local if started
insserv:  loop involving service rc.local at depth 17
insserv:  loop involving service iptables at depth 1
insserv: Starting iptables depends on rc.local and therefore on system facility `$all' which can not be true!
insserv: exiting now without changing boot order!
update-rc.d: error: insserv rejected the script header
dpkg: error processing rsync (--configure):
 subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of lsb-core:
 lsb-core depends on rsync; however:
  Package rsync is not configured yet.
dpkg: error processing lsb-core (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb-graphics:
 lsb-graphics depends on lsb-core; however:
  Package lsb-core is not configured yet.configured to not write apport reports

dpkg: error processing lsb-graphics (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of lsb-cxx:
 lsb-cxx depends on lsb-core; however:
  Package lsb-core is not configured yet.
dpkg: error processing lsb-cxx (--configure):
 dependency problems - leaving unconfiguredconfigured to not write apport reports
 configured to not write apport reports

dpkg: dependency problems prevent configuration of lsb-desktop:
 lsb-desktop depends on lsb-graphics; however:
  Package lsb-graphics is not configured yet.
dpkg: error processing lsb-desktop (--configure):
 dependency problems - leaving unconfigured
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of lsb:
 lsb depends on lsb-core; however:
  Package lsb-core is not configured yet.
 lsb depends on lsb-graphics; however:
  Package lsb-graphics is not configured yet.
 lsb depends on lsb-cxx; however:
  Package lsb-cxx is not configured yet.
 lsb depends on lsb-desktop; however:
  Package lsb-desktop is not configured yet.
dpkg: error processing lsb (--configure):
 dependency problems - leaving unconfigured
configured to not write apport reports
                                      Errors were encountered while processing:
 rsync
 lsb-core
 lsb-graphics
 lsb-cxx
 lsb-desktop
 lsb
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@debian:/home/debian# 

Czuję, że chyba instalacja od nowa, ale przecież da się to chyba jakoś zrobić bez ponownej instalacji, która według mnie jest bez sensu.

[paolus]

Witam
Masz problem z pętlą w skrypcie iptables i w pliku rc.local:

Kod: Zaznacz cały

insserv: There is a loop between service iptables and rc.local if started insserv:  loop involving service rc.local at depth 17

Sprawdź czy w rc.local nie masz zdefiniowanych reguł iptables.
Inne ostrzeżenie mówi o braku nagłówka LSB w skrypcie iptables.sh.
Podsumowując: pakiet lsb nie może być skonfigurowany ponieważ istniejąca pętla zburzy:

Kod: Zaznacz cały

dependency based boot

Rozwiązaniem może być chwilowe wyłączenie skryptu iptables.sh (aby nie uwzględniał go w zależnościach) upgrade systemu i ponowne dodanie skryptu. Ewentualnie zmodyfikuj skrypt firewalla.
Pozdrawiam.

[debianowiec]

Witam
Masz problem z pętlą w skrypcie iptables i w pliku rc.local:

Kod: Zaznacz cały

insserv: There is a loop between service iptables and rc.local if started insserv:  loop involving service rc.local at depth 17

Sprawdź czy w rc.local nie masz zdefiniowanych reguł iptables.
Inne ostrzeżenie mówi o braku nagłówka LSB w skrypcie iptables.sh.
Podsumowując: pakiet lsb nie może być skonfigurowany ponieważ istniejąca pętla zburzy:

Kod: Zaznacz cały

dependency based boot

Rozwiązaniem może być chwilowe wyłączenie skryptu iptables.sh (aby nie uwzględniał go w zależnościach) upgrade systemu i ponowne dodanie skryptu. Ewentualnie zmodyfikuj skrypt firewalla.
Pozdrawiam.

Dziękuję za odpowiedz, pomogło mi wyłączenie iptables (nie pomyślałbym, że o iptables chodziło), i teraz przy aktualizacji systemu mam o wiele krótszą informację:

Kod: Zaznacz cały

root@debian:/home/debian# apt-get upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
5 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]? y
Setting up rsync (3.0.7-2) ...
update-rc.d: using dependency based boot sequencing
Setting up lsb-core (3.2-23.2squeeze1) ...
dpkg: warning: obsolete option '--print-installation-architecture', please use '--print-architecture' instead.
Setting up lsb-cxx (3.2-23.2squeeze1) ...
Setting up lsb-graphics (3.2-23.2squeeze1) ...
Setting up lsb-desktop (3.2-23.2squeeze1) ...
root@debian:/home/debian# 

Problem mi został z zainstalowaniem lsb.
Co do Twojego pytania, to w rc.local nie mam żadnych zdefiniowanych reguł iptables.
Nie wiem czy to ważne, ale oprócz iptables miałem też zainstalowanego firestartera. O ile wiem jest to nakładka graficzna na iptables?
Pozdrawiam.

Pomogło mi od nowa wykonanie:

Kod: Zaznacz cały

apt-get update

a potem:

Kod: Zaznacz cały

apt-get upgrade

Kod: Zaznacz cały

root@debian:/home/debian# apt-get install lsb
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Suggested packages:
  lsb-printing lsb-multimedia lsb-languages
The following NEW packages will be installed:
  lsb
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/15.2 kB of archives.
After this operation, 16.4 kB of additional disk space will be used.
Selecting previously deselected package lsb.
(Reading database ... 137506 files and directories currently installed.)
Unpacking lsb (from .../lsb_3.2-23.2squeeze1_all.deb) ...
Setting up lsb (3.2-23.2squeeze1) ...
root@debian:/home/debian# dir
Desktop  Documents  Downloads  Music  Pictures    Public    Templates  Videos
root@debian:/home/debian# cd Downloads
root@debian:/home/debian/Downloads# dir
Linux_Printer_Package       openprinting-splix-2.0.0-2lsb3.2.i486.rpm
Linux_Printer_Package.tgz  openprinting-splix-2.0.0-2lsb3.2.x86_64.rpm
root@debian:/home/debian/Downloads# rpm -i openprinting-splix-2.0.0-2lsb3.2.x86_64.rpm
rpm: RPM should not be used directly install RPM packages, use Alien instead!
rpm: However assuming you know what you are doing...
error: Failed dependencies:
    /bin/sh is needed by openprinting-splix-2.0.0-2lsb3.2.x86_64
    lsb >= 3.2 is needed by openprinting-splix-2.0.0-2lsb3.2.x86_64
root@debian:/home/debian/Downloads# apt-get install lsb
Reading package lists... Done
Building dependency tree       
Reading state information... Done
lsb is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@debian:/home/debian/Downloads# dir
Linux_Printer_Package       openprinting-splix-2.0.0-2lsb3.2.i486.rpm
Linux_Printer_Package.tgz  openprinting-splix-2.0.0-2lsb3.2.x86_64.rpm
root@debian:/home/debian/Downloads# rpm -i openprinting-splix-2.0.0-2lsb3.2.x86_64.rpm
rpm: RPM should not be used directly install RPM packages, use Alien instead!
rpm: However assuming you know what you are doing...
error: Failed dependencies:
    /bin/sh is needed by openprinting-splix-2.0.0-2lsb3.2.x86_64
    lsb >= 3.2 is needed by openprinting-splix-2.0.0-2lsb3.2.x86_64
root@debian:/home/debian/Downloads# 

ale niby wykrywa mi, że mam zainstalowane w systemie lsb, to przy instalacji tego:

Kod: Zaznacz cały

rpm -i openprinting-splix-2.0.0-2lsb3.2.x86_64.rpm

wyświetla mi błąd, że potrzebuję:

Kod: Zaznacz cały

lsb >= 3.2 is needed by openprinting-splix-2.0.0-2lsb3.2.x86_64

[paolus]

Dlaczego instalujesz rpm jak masz debiana? Na stronie którą podałeś jest paczka deb.

[debianowiec]

Dlaczego instalujesz rpm jak masz debiana? Na stronie którą podałeś jest paczka deb.

Dziękuję, po zainstalowaniu paczki .deb sterownik mi się zainstalował drukarkę widzi poprawnie, ale nie chce mi drukować. Podaję ip, pod którym jest drukarka:

Kod: Zaznacz cały

192.168.4.2

ale nie chce drukować. Ale i tak dużo mi pomogłeś, jeszcze pokombinuję z tym drukowaniem. Wielkie podziękowania.

Ps. Z ciekawości się spytam, dlaczego mam takie problemy jeśli chodzi o rpm w Debianie?

[paolus]

Paczki rpm są dla redhata i pochodnych.