ATI sterowniki otwarte i ma - Polskie Forum Użytkowników Debiana

ATI sterowniki otwarte i ma

ODPOWIEDZ

Posty: 9 • Strona 1 z 1

GrzegorzL: Posty: 13; Rejestracja: 28 grudnia 2010, 19:40

ATI sterowniki otwarte i mała rozdzielczość

Cytuj

Post autor: GrzegorzL » 25 czerwca 2011, 11:24

Witam.
Jestem użytkownikiem KDE (4.6.3) i niestety przy używaniu sterowników zamkniętych od grafiki (ATI, karta graficzna HD 4870) wydajność pozostawia bardzo wiele do życzenia. Zdecydowałem przesiąść się na sterowniki otwarte, lecz niestety występuje pewien problem. Wydajność jest znakomita nic nie przycina, problem jednak jest z rozdzielczością. Wyniki:

Kod: Zaznacz cały

xrandr

Kod: Zaznacz cały

Screen 0: minimum 320 x 200, current 1152 x 864, maximum 1360 x 1360
HDMI-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1360x768       59.8  
   1152x864       60.0* 
   1024x768       60.0  
   800x600        60.3  
   640x480        59.9  
   680x384       119.6    119.9  
   576x432       120.1  
   512x384       120.0  
   400x300       120.6  
   320x240       120.1  
DVI-0 disconnected (normal left inverted right x axis y axis)

Dodam tylko, że na moim monitorze (BenQ E2220HDP) wygląda to fatalnie, a nie ma możliwości ustawienia wyższej rozdzielczość np. 1600×900. Proszę o pomoc w rozwiązaniu tego problemu. I o odpowiedz czy jestem zmuszony z korzystania zamkniętych sterowników.

Informacje o sprzęcie i systemie:

Kod: Zaznacz cały

 uname -a 
Linux dom 2.6.38-2-amd64 #1 SMP Sun May 8 13:51:57 UTC 2011 x86_64 GNU/Linux

Kod: Zaznacz cały

 dpkg –print-architecture
amd64

Kod: Zaznacz cały

 lspci -k
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
        Subsystem: ASRock Incorporation Device 9600
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
        Kernel driver in use: pcieport
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
        Kernel driver in use: pcieport
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
        Subsystem: ASRock Incorporation Motherboard (one of many)
        Kernel driver in use: ahci
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
        Subsystem: ASRock Incorporation Device 4397
        Kernel driver in use: ohci_hcd
00:12.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
        Subsystem: ASRock Incorporation Device 4398
        Kernel driver in use: ohci_hcd
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
        Subsystem: ASRock Incorporation Device 4396
        Kernel driver in use: ehci_hcd
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
        Subsystem: ASRock Incorporation Device 4397
        Kernel driver in use: ohci_hcd
00:13.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
        Subsystem: ASRock Incorporation Device 4398
        Kernel driver in use: ohci_hcd
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
        Subsystem: ASRock Incorporation Device 4396
        Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
        Subsystem: ASRock Incorporation Device 4385
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
        Subsystem: ASRock Incorporation Device 439c
        Kernel driver in use: pata_atiixp
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
        Subsystem: ASRock Incorporation Device 0397
        Kernel driver in use: HDA Intel
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
        Subsystem: ASRock Incorporation Device 439d
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
        Subsystem: ASRock Incorporation Device 4399
        Kernel driver in use: ohci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4870]
        Subsystem: Hightech Information System Ltd. Device 2007
        Kernel driver in use: radeon
01:00.1 Audio device: ATI Technologies Inc HD48x0 audio
        Subsystem: Hightech Information System Ltd. Device aa30
        Kernel driver in use: HDA Intel
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
        Subsystem: ASRock Incorporation Motherboard (one of many)
        Kernel driver in use: r8169
03:06.0 Network controller: Texas Instruments ACX 100 22Mbps Wireless Interface
        Subsystem: D-Link System Inc DWL-520+ 22Mbps PCI Wireless Adapter

Kod: Zaznacz cały

 
lspci -n
00:00.0 0600: 1022:9600
00:02.0 0604: 1022:9603
00:0a.0 0604: 1022:9609
00:11.0 0106: 1002:4390
00:12.0 0c03: 1002:4397
00:12.1 0c03: 1002:4398
00:12.2 0c03: 1002:4396
00:13.0 0c03: 1002:4397
00:13.1 0c03: 1002:4398
00:13.2 0c03: 1002:4396
00:14.0 0c05: 1002:4385 (rev 3a)
00:14.1 0101: 1002:439c
00:14.2 0403: 1002:4383
00:14.3 0601: 1002:439d
00:14.4 0604: 1002:4384
00:14.5 0c03: 1002:4399
00:18.0 0600: 1022:1200
00:18.1 0600: 1022:1201
00:18.2 0600: 1022:1202
00:18.3 0600: 1022:1203
00:18.4 0600: 1022:1204
01:00.0 0300: 1002:9440
01:00.1 0403: 1002:aa30
02:00.0 0200: 10ec:8168 (rev 03)
03:06.0 0280: 104c:8400

Kod: Zaznacz cały

 
/var/log/Xorg.0.log

http://wklej.to/lgZDO

I dodam jeszcze:

Kod: Zaznacz cały

xorg.conf.

http://wklej.to/k0dOO

Z góry dziękuję za pomoc G.L.

marcin1982: Moderator; Posty: 1731; Rejestracja: 05 maja 2011, 12:59; Lokalizacja: Zagłębie Dąbrowskie

Cytuj

Post autor: marcin1982 » 25 czerwca 2011, 11:37

Sprawdź w specyfikacji technicznej swojego monitora - BenQ E2220HDP parametry takie jak HorizSync oraz VertRefresh. Wycinek pliku /etc/X11/xorg.conf po ręcznej edycji powinien wyglądać tak:

Kod: Zaznacz cały

Section "Monitor"
    Identifier "monitor1"
    VendorName "XXXXXXX"
    ModelName "XXXXXXXX"
    HorizSync XX-XX
    VertRefresh XX-XX

Parametry dopisane przez Ciebie muszą być zgodne ze specyfikacją sprzętu - błędne wpisy grożą uszkodzeniem sprzętu! Dopisz więc tylko HorizSync oraz VertRefresh, reszta niech pozostanie tak, jak jest.

GrzegorzL: Posty: 13; Rejestracja: 28 grudnia 2010, 19:40

Cytuj

Post autor: GrzegorzL » 25 czerwca 2011, 11:56

Na dołączonej płytce znalazłem coś takiego:
http://www.speedyshare.com/files/291405 ... ion-pl.pdf
czyli rozumiem że
HorizSync - a tutaj podaje roździelczośc np . 1600×900.
VertRefresh - 60 Hz

marcin1982: Moderator; Posty: 1731; Rejestracja: 05 maja 2011, 12:59; Lokalizacja: Zagłębie Dąbrowskie

Cytuj

Post autor: marcin1982 » 25 czerwca 2011, 12:11

Częstotliwość pozioma => HorizSync => ustaw: 30-83
Częstotliwość pionowa => VertRefreszh => ustaw: 50-76.
=======
Jeśli czegoś nie jesteś pewien to nie ruszaj tych ustawień.

GrzegorzL: Posty: 13; Rejestracja: 28 grudnia 2010, 19:40

Cytuj

Post autor: GrzegorzL » 25 czerwca 2011, 12:13

Czyli wpis powinien wyglądać tak?

Kod: Zaznacz cały

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
        HorizSync     "30-83"
        VertRefresh   "50-76"
EndSection

marcin1982: Moderator; Posty: 1731; Rejestracja: 05 maja 2011, 12:59; Lokalizacja: Zagłębie Dąbrowskie

Cytuj

Post autor: marcin1982 » 25 czerwca 2011, 12:20

Bez cudzysłowu:

Kod: Zaznacz cały

Section "Monitor"
    Identifier "monitor1"
    VendorName "Plug'n Play"
    ModelName "SyncMaster"
    HorizSync 30-71
    VertRefresh 50-160

Oczywiście zastosuj swoje wartości! Ja mam stary monitor CRT - u mnie to wygląda inaczej, wstaw swoje wartości. Potem zrestartuj serwer X:

Kod: Zaznacz cały

Ctrl+Alt+Backspace

Cofnij w takim razie zmiany - przyczyny trzeba szukać dalej.

GrzegorzL: Posty: 13; Rejestracja: 28 grudnia 2010, 19:40

Cytuj

Post autor: GrzegorzL » 25 czerwca 2011, 12:28

Wpisy zostały dodane Obecnie mój:

Kod: Zaznacz cały

 xorg.conf

wygląda tak:
http://wklej.to/IBshy

Kod: Zaznacz cały

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	Screen      2  "Screen2" RightOf "Screen1"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "FGL.renamed.libglx"
	Load  "dri2"
	Load  "glx"
	Load  "record"
	Load  "dbe"
	Load  "extmod"
	Load  "dri"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
        HorizSync     30-83
        VertRefresh   50-76
        Modeline "1600x900" 115.62  1600 1664 1808 2064   900  900  902  933 
        
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
        HorizSync     30-83
        VertRefresh   50-76
        Modeline "1600x900" 115.62  1600 1664 1808 2064   900  900  902  933 

EndSection

Section "Monitor"
	Identifier   "Monitor2"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
        HorizSync     30-83
        VertRefresh   50-76
        Modeline "1600x900" 115.62  1600 1664 1808 2064   900  900  902  933 

EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "CustomEDID"         	# [<str>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ClockGating"        	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
        #Option     "ForceLowPowerMode"  	# [<bool>]
        #Option     "DynamicPM"          	# [<bool>]
        #Option     "NewPLL"             	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
	Identifier  "Card0"
	Driver      "ati"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "Rotate"             	# <str>
        #Option     "fbdev"              	# <str>
        #Option     "debug"              	# [<bool>]
	Identifier  "Card1"
	Driver      "fbdev"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "DefaultRefresh"     	# [<bool>]
        #Option     "ModeSetClearScreen" 	# [<bool>]
	Identifier  "Card2"
	Driver      "vesa"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
               
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
                
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
               
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen2"
	Device     "Card2"
	Monitor    "Monitor2"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
   	EndSubSection
EndSection

Dodałem nawet modeline ale tak jak było tak jest xrandr nie widzi większych rozdzielczości niż 1360x768.

DaVidoSS: Junior Member; Posty: 875; Rejestracja: 06 marca 2010, 11:26; Lokalizacja: ~/

Cytuj

Post autor: DaVidoSS » 25 czerwca 2011, 16:45

Kod: Zaznacz cały

gtf 1600 900 60 -x

Wygeneruje Ci modeline.
Dodaj te linijkę do xorg.conf w sekcji Monitor.

GrzegorzL: Posty: 13; Rejestracja: 28 grudnia 2010, 19:40

Cytuj

Post autor: GrzegorzL » 25 czerwca 2011, 16:56

Rozumiem, że mam wpisać w konsoli potem dodać do xorg.conf?

DaVidoSS pisze:
Kod: Zaznacz cały
gtf 1600 900 60 -x
Wygeneruje Ci modeline.
Dodaj te linijkę do xorg.conf w sekcji Monitor.

No niestety po dodaniu modeline z gtf mój xorg.conf wygląda tak:
http://wklej.to/CVoD7

Kod: Zaznacz cały

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	Screen      2  "Screen2" RightOf "Screen1"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "FGL.renamed.libglx"
	Load  "dri2"
	Load  "glx"
	Load  "record"
	Load  "dbe"
	Load  "extmod"
	Load  "dri"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
        HorizSync     30-83
        VertRefresh   50-76
        Modeline "1600x900_60.00"  119.00  1600 1696 1864 2128  900 901 904 932  -HSync +Vsync

EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
        HorizSync     30-83
        VertRefresh   50-76
        Modeline "1600x900_60.00"  119.00  1600 1696 1864 2128  900 901 904 932  -HSync +Vsync
        
EndSection

Section "Monitor"
	Identifier   "Monitor2"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
        HorizSync     30-83
        VertRefresh   50-76
        Modeline "1600x900_60.00"  119.00  1600 1696 1864 2128  900 901 904 932  -HSync +Vsync

EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "CustomEDID"         	# [<str>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ClockGating"        	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
        #Option     "ForceLowPowerMode"  	# [<bool>]
        #Option     "DynamicPM"          	# [<bool>]
        #Option     "NewPLL"             	# [<bool>]
        #Option     "ZaphodHeads"        	# <str>
	Identifier  "Card0"
	Driver      "radeon"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "Rotate"             	# <str>
        #Option     "fbdev"              	# <str>
        #Option     "debug"              	# [<bool>]
	Identifier  "Card1"
	Driver      "fbdev"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "DefaultRefresh"     	# [<bool>]
        #Option     "ModeSetClearScreen" 	# [<bool>]
	Identifier  "Card2"
	Driver      "vesa"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen2"
	Device     "Card2"
	Monitor    "Monitor2"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

A:

Kod: Zaznacz cały

xrandr

dalej niezmiennie

Kod: Zaznacz cały

 
Screen 0: minimum 320 x 200, current 1152 x 864, maximum 1360 x 1360
HDMI-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1360x768       59.8  
   1152x864       60.0* 
   1024x768       60.0  
   800x600        60.3  
   640x480        59.9  
   680x384       119.6    119.9  
   576x432       120.1  
   512x384       120.0  
   400x300       120.6  
   320x240       120.1  
DVI-0 disconnected (normal left inverted right x axis y axis)

proszę o pomoc

ODPOWIEDZ

Posty: 9 • Strona 1 z 1

Wróć do „Software”