Konfiguracja karty grafiki nvidii - Sid

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
Awatar użytkownika
Buzzard
Posty: 12
Rejestracja: 13 stycznia 2007, 22:33
Lokalizacja: Wrocław

Konfiguracja karty grafiki nvidii - Sid

Post autor: Buzzard »

Witam.

Mam problemy z kartą grafiki w Debianie Sid. Podchodziłem do tego trzy razy. Dwa razy przeinstalowywałem system. I ciągle to samo. Zainstalowałem sterownik do karty grafiki ze strony nvidia.com, uprzednio wyłączając sterownik nouveau, gdyż nie wspiera sprzętowej akceleracji. Niby po instalacji własnościowych sterowników akceleracja jest:

Kod: Zaznacz cały

# glxinfo | grep -i direct
direct rendering: Yes
    GL_EXT_Cg_shader, GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
Również poprawnie działają aplikacje wymagające akceleracji 3D.

Niestety nie da się uruchomić GNOME Shell (jedynie tryb zastępczy, który mi zaproponowano przy pierwszym uruchomieniu środowiska), pojawia się pulpit, panel i środowisko się wiesza. Pomaga jedynie restart X-ów.
KDE również zawiesza się na etapie uruchamiania, zanim jeszcze zniknie ten ekran powitalny, czy jak tam się to nazywa.
Wszystkie elementy systemu mam z podstawowych repozytoriów Sida i w wersjach takich, jakie tam występują, bez żadnych kombinacji z wersjami.

Można zerknąć tutaj:
xorg.conf

Kod: Zaznacz cały

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 285.05.09  ([email protected])  Fri Sep 23 19:18:19 PDT 2011

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
Xorg.0.log

Kod: Zaznacz cały

[ 11894.684] 
X.Org X Server 1.11.1.902 (1.11.2 RC 2)
Release Date: 2011-10-28
[ 11894.684] X Protocol Version 11, Revision 0
[ 11894.684] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 11894.684] Current Operating System: Linux buzzard-pc 3.0.0-1-686-pae #1 SMP Sat Aug 27 16:41:03 UTC 2011 i686
[ 11894.684] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae root=UUID=286dc12c-2ed2-44eb-bad8-ebc1312337f6 ro quiet
[ 11894.684] Build Date: 02 November 2011  11:01:26AM
[ 11894.684] xorg-server 2:1.11.1.902-1 (Cyril Brulebois <[email protected]>) 
[ 11894.684] Current version of pixman: 0.24.0
[ 11894.684] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 11894.684] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11894.685] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 18 20:02:55 2011
[ 11894.685] (==) Using config file: "/etc/X11/xorg.conf"
[ 11894.685] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11894.685] (==) ServerLayout "Layout0"
[ 11894.685] (**) |-->Screen "Screen0" (0)
[ 11894.686] (**) |   |-->Monitor "Monitor0"
[ 11894.686] (**) |   |-->Device "Device0"
[ 11894.686] (**) |-->Input Device "Keyboard0"
[ 11894.686] (**) |-->Input Device "Mouse0"
[ 11894.686] (==) Automatically adding devices
[ 11894.686] (==) Automatically enabling devices
[ 11894.686] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 11894.686] 	Entry deleted from font path.
[ 11894.686] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
[ 11894.686] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11894.686] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11894.686] (WW) Disabling Keyboard0
[ 11894.686] (WW) Disabling Mouse0
[ 11894.686] (II) Loader magic: 0xb773c580
[ 11894.686] (II) Module ABI versions:
[ 11894.686] 	X.Org ANSI C Emulation: 0.4
[ 11894.686] 	X.Org Video Driver: 11.0
[ 11894.686] 	X.Org XInput driver : 13.0
[ 11894.686] 	X.Org Server Extension : 6.0
[ 11894.688] (--) PCI:*(0:2:0:0) 10de:01d1:1043:8212 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 11894.689] (II) Open ACPI successful (/var/run/acpid.socket)
[ 11894.689] (II) LoadModule: "extmod"
[ 11894.689] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11894.690] (II) Module extmod: vendor="X.Org Foundation"
[ 11894.690] 	compiled for 1.11.1.902, module version = 1.0.0
[ 11894.690] 	Module class: X.Org Server Extension
[ 11894.690] 	ABI class: X.Org Server Extension, version 6.0
[ 11894.690] (II) Loading extension SELinux
[ 11894.690] (II) Loading extension MIT-SCREEN-SAVER
[ 11894.690] (II) Loading extension XFree86-VidModeExtension
[ 11894.690] (II) Loading extension XFree86-DGA
[ 11894.690] (II) Loading extension DPMS
[ 11894.690] (II) Loading extension XVideo
[ 11894.691] (II) Loading extension XVideo-MotionCompensation
[ 11894.691] (II) Loading extension X-Resource
[ 11894.691] (II) LoadModule: "dbe"
[ 11894.691] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11894.691] (II) Module dbe: vendor="X.Org Foundation"
[ 11894.691] 	compiled for 1.11.1.902, module version = 1.0.0
[ 11894.691] 	Module class: X.Org Server Extension
[ 11894.691] 	ABI class: X.Org Server Extension, version 6.0
[ 11894.691] (II) Loading extension DOUBLE-BUFFER
[ 11894.691] (II) LoadModule: "glx"
[ 11894.692] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11894.829] (II) Module glx: vendor="NVIDIA Corporation"
[ 11894.829] 	compiled for 4.0.2, module version = 1.0.0
[ 11894.829] 	Module class: X.Org Server Extension
[ 11894.829] (II) NVIDIA GLX Module  285.05.09  Fri Sep 23 19:13:43 PDT 2011
[ 11894.829] (II) Loading extension GLX
[ 11894.829] (II) LoadModule: "record"
[ 11894.830] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11894.830] (II) Module record: vendor="X.Org Foundation"
[ 11894.830] 	compiled for 1.11.1.902, module version = 1.13.0
[ 11894.830] 	Module class: X.Org Server Extension
[ 11894.830] 	ABI class: X.Org Server Extension, version 6.0
[ 11894.830] (II) Loading extension RECORD
[ 11894.830] (II) LoadModule: "dri"
[ 11894.831] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11894.831] (II) Module dri: vendor="X.Org Foundation"
[ 11894.831] 	compiled for 1.11.1.902, module version = 1.0.0
[ 11894.831] 	ABI class: X.Org Server Extension, version 6.0
[ 11894.831] (II) Loading extension XFree86-DRI
[ 11894.831] (II) LoadModule: "dri2"
[ 11894.832] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11894.832] (II) Module dri2: vendor="X.Org Foundation"
[ 11894.832] 	compiled for 1.11.1.902, module version = 1.2.0
[ 11894.832] 	ABI class: X.Org Server Extension, version 6.0
[ 11894.832] (II) Loading extension DRI2
[ 11894.832] (II) LoadModule: "nvidia"
[ 11894.832] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11894.834] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11894.834] 	compiled for 4.0.2, module version = 1.0.0
[ 11894.834] 	Module class: X.Org Video Driver
[ 11894.834] (II) NVIDIA dlloader X Driver  285.05.09  Fri Sep 23 18:54:43 PDT 2011
[ 11894.834] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11894.834] (++) using VT number 8

[ 11894.845] (II) Loading sub module "fb"
[ 11894.845] (II) LoadModule: "fb"
[ 11894.845] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11894.846] (II) Module fb: vendor="X.Org Foundation"
[ 11894.846] 	compiled for 1.11.1.902, module version = 1.0.0
[ 11894.846] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 11894.846] (II) Loading sub module "wfb"
[ 11894.846] (II) LoadModule: "wfb"
[ 11894.846] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11894.846] (II) Module wfb: vendor="X.Org Foundation"
[ 11894.846] 	compiled for 1.11.1.902, module version = 1.0.0
[ 11894.846] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 11894.847] (II) Loading sub module "ramdac"
[ 11894.847] (II) LoadModule: "ramdac"
[ 11894.847] (II) Module "ramdac" already built-in
[ 11894.847] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11894.847] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11894.847] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11894.847] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 11894.847] (==) NVIDIA(0): RGB weight 888
[ 11894.847] (==) NVIDIA(0): Default visual is TrueColor
[ 11894.847] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11895.500] (II) NVIDIA(GPU-0): Display (LG Electronics L1918S (CRT-0)) does not support
[ 11895.500] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[ 11895.502] (II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:2:0:0 (GPU-0)
[ 11895.502] (--) NVIDIA(0): Memory: 262144 kBytes
[ 11895.502] (--) NVIDIA(0): VideoBIOS: 05.72.22.43.00
[ 11895.502] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 11895.503] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 11895.503] (--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:2:0:0
[ 11895.503] (--) NVIDIA(0):     LG Electronics L1918S (CRT-0)
[ 11895.503] (--) NVIDIA(0): LG Electronics L1918S (CRT-0): 400.0 MHz maximum pixel clock
[ 11895.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[ 11895.503] (**) NVIDIA(0):     enabled on all display devices.
[ 11895.504] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 11895.504] (==) NVIDIA(0): 
[ 11895.504] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 11895.504] (==) NVIDIA(0):     will be used as the requested mode.
[ 11895.504] (==) NVIDIA(0): 
[ 11895.504] (II) NVIDIA(0): Validated modes:
[ 11895.504] (II) NVIDIA(0):     "nvidia-auto-select"
[ 11895.504] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 11895.508] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 11895.508] (--) NVIDIA(0):     option
[ 11895.508] (--) Depth 24 pixmap format is 32 bpp
[ 11895.519] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 11895.626] (II) Loading extension NV-GLX
[ 11895.679] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 11895.679] (==) NVIDIA(0): Backing store disabled
[ 11895.679] (==) NVIDIA(0): Silken mouse enabled
[ 11895.679] (**) NVIDIA(0): DPMS enabled
[ 11895.680] (II) Loading extension NV-CONTROL
[ 11895.681] (II) Loading extension XINERAMA
[ 11895.681] (II) Loading sub module "dri2"
[ 11895.681] (II) LoadModule: "dri2"
[ 11895.681] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11895.681] (II) Module dri2: vendor="X.Org Foundation"
[ 11895.681] 	compiled for 1.11.1.902, module version = 1.2.0
[ 11895.681] 	ABI class: X.Org Server Extension, version 6.0
[ 11895.681] (II) NVIDIA(0): [DRI2] Setup complete
[ 11895.682] (==) RandR enabled
[ 11895.682] (II) Initializing built-in extension Generic Event Extension
[ 11895.682] (II) Initializing built-in extension SHAPE
[ 11895.682] (II) Initializing built-in extension MIT-SHM
[ 11895.682] (II) Initializing built-in extension XInputExtension
[ 11895.682] (II) Initializing built-in extension XTEST
[ 11895.682] (II) Initializing built-in extension BIG-REQUESTS
[ 11895.682] (II) Initializing built-in extension SYNC
[ 11895.682] (II) Initializing built-in extension XKEYBOARD
[ 11895.682] (II) Initializing built-in extension XC-MISC
[ 11895.682] (II) Initializing built-in extension SECURITY
[ 11895.682] (II) Initializing built-in extension XINERAMA
[ 11895.682] (II) Initializing built-in extension XFIXES
[ 11895.682] (II) Initializing built-in extension RENDER
[ 11895.682] (II) Initializing built-in extension RANDR
[ 11895.682] (II) Initializing built-in extension COMPOSITE
[ 11895.682] (II) Initializing built-in extension DAMAGE
[ 11895.682] (II) SELinux: Disabled on system
[ 11895.687] (II) Initializing extension GLX
[ 11895.795] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 11895.795] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11895.795] (II) LoadModule: "evdev"
[ 11895.795] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11895.796] (II) Module evdev: vendor="X.Org Foundation"
[ 11895.796] 	compiled for 1.11.0, module version = 2.6.0
[ 11895.796] 	Module class: X.Org XInput Driver
[ 11895.796] 	ABI class: X.Org XInput driver, version 13.0
[ 11895.796] (II) Using input driver 'evdev' for 'Power Button'
[ 11895.796] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11895.796] (**) Power Button: always reports core events
[ 11895.796] (**) Power Button: Device: "/dev/input/event4"
[ 11895.796] (--) Power Button: Found keys
[ 11895.796] (II) Power Button: Configuring as keyboard
[ 11895.796] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 11895.796] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11895.796] (**) Option "xkb_rules" "evdev"
[ 11895.796] (**) Option "xkb_model" "pc105"
[ 11895.796] (**) Option "xkb_layout" "pl"
[ 11895.838] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 11895.838] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11895.838] (II) Using input driver 'evdev' for 'Power Button'
[ 11895.838] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11895.838] (**) Power Button: always reports core events
[ 11895.838] (**) Power Button: Device: "/dev/input/event3"
[ 11895.838] (--) Power Button: Found keys
[ 11895.838] (II) Power Button: Configuring as keyboard
[ 11895.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 11895.839] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 11895.839] (**) Option "xkb_rules" "evdev"
[ 11895.839] (**) Option "xkb_model" "pc105"
[ 11895.839] (**) Option "xkb_layout" "pl"
[ 11895.839] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 11895.840] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 11895.840] (II) Using input driver 'evdev' for 'Sleep Button'
[ 11895.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11895.840] (**) Sleep Button: always reports core events
[ 11895.840] (**) Sleep Button: Device: "/dev/input/event2"
[ 11895.840] (--) Sleep Button: Found keys
[ 11895.840] (II) Sleep Button: Configuring as keyboard
[ 11895.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 11895.840] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 11895.840] (**) Option "xkb_rules" "evdev"
[ 11895.840] (**) Option "xkb_model" "pc105"
[ 11895.840] (**) Option "xkb_layout" "pl"
[ 11895.841] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event1)
[ 11895.841] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 11895.841] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[ 11895.841] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11895.841] (**) Logitech Optical USB Mouse: always reports core events
[ 11895.841] (**) Logitech Optical USB Mouse: Device: "/dev/input/event1"
[ 11895.841] (--) Logitech Optical USB Mouse: Found 3 mouse buttons
[ 11895.841] (--) Logitech Optical USB Mouse: Found scroll wheel(s)
[ 11895.841] (--) Logitech Optical USB Mouse: Found relative axes
[ 11895.841] (--) Logitech Optical USB Mouse: Found x and y relative axes
[ 11895.841] (II) Logitech Optical USB Mouse: Configuring as mouse
[ 11895.841] (II) Logitech Optical USB Mouse: Adding scrollwheel support
[ 11895.841] (**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[ 11895.841] (**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11895.841] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input1/event1"
[ 11895.841] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 9)
[ 11895.842] (II) Logitech Optical USB Mouse: initialized for relative axes.
[ 11895.842] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[ 11895.842] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[ 11895.842] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 11895.842] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 11895.842] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 11895.842] (II) No input driver/identifier specified (ignoring)
[ 11895.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 11895.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 11895.843] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 11895.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11895.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 11895.843] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 11895.843] (--) AT Translated Set 2 keyboard: Found keys
[ 11895.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 11895.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 11895.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 11895.843] (**) Option "xkb_rules" "evdev"
[ 11895.843] (**) Option "xkb_model" "pc105"
[ 11895.843] (**) Option "xkb_layout" "pl"
[ 11895.844] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 11895.844] (II) No input driver/identifier specified (ignoring)
.xsession-errors

Kod: Zaznacz cały

/etc/gdm3/Xsession: Beginning session setup...
gnome-session[10624]: WARNING: Could not parse desktop file /home/buzzard/.config/autostart/xfce4-settings-helper-autostart.desktop: Plik klucza nie zawiera klucza "Name"
gnome-session[10624]: WARNING: could not read /home/buzzard/.config/autostart/xfce4-settings-helper-autostart.desktop
gnome-session[10624]: WARNING: Could not parse desktop file /home/buzzard/.config/autostart/xfce4-tips-autostart.desktop: Plik klucza nie zawiera klucza "Name"
gnome-session[10624]: WARNING: could not read /home/buzzard/.config/autostart/xfce4-tips-autostart.desktop
GNOME_KEYRING_CONTROL=/tmp/keyring-KqdVr5
GNOME_KEYRING_CONTROL=/tmp/keyring-KqdVr5
GPG_AGENT_INFO=/tmp/keyring-KqdVr5/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-KqdVr5
GPG_AGENT_INFO=/tmp/keyring-KqdVr5/gpg:0:1

** (gnome-settings-daemon:10672): WARNING **: Ignoring unknown module 'org.gnome.settings-daemon.plugins.gconf'
GNOME_KEYRING_CONTROL=/tmp/keyring-KqdVr5
GPG_AGENT_INFO=/tmp/keyring-KqdVr5/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-KqdVr5/ssh
Niepowodzenie: Zainicjowanie modułu nie powiodło się
Failed to play sound: File or data not found
Nie można otworzyć pliku /home/buzzard/Desktop/Centrum sterowania GNOME.desktop z aktywatorem panelu: Nie ma takiego pliku ani katalogu
** Message: applet now removed from the notification area
Initializing nautilus-gdu extension

(gnome-panel:10711): GLib-GObject-WARNING **: /tmp/buildd/glib2.0-2.28.8/./gobject/gsignal.c:2275: signal `size_request' is invalid for instance `0x86604b0'
** Message: applet now embedded in the notification area

** (gnome-panel:10711): WARNING **: Failed to get pixmap 18874478, 840, 0

** (gnome-panel:10711): WARNING **: Failed to get pixmap 18874478, 1107, 0

(gnome-settings-daemon:10672): updates-plugin-WARNING **: failed to open directory: Błąd podczas otwierania katalogu "/run/udev/firmware-missing": Nie ma takiego pliku ani katalogu
** (notification-daemon:10720): DEBUG: Adding id 1

** (notification-daemon:10720): WARNING **: "icon_data" hint is deprecated, please use "image_data" instead
** (notification-daemon:10720): DEBUG: Notification closed - removing from queue
** (notification-daemon:10720): DEBUG: Removing id 1
** (notification-daemon:10720): DEBUG: Bubble destroyed
** (notification-daemon:10720): DEBUG: Adding id 2
** (notification-daemon:10720): DEBUG: Notification closed - removing from queue
** (notification-daemon:10720): DEBUG: Removing id 2
** (notification-daemon:10720): DEBUG: Bubble destroyed
** (notification-daemon:10720): DEBUG: Bubble is transient
Założyłem nowe konto użytkownika i na tym dzieje się tak samo.
s4per
Posty: 30
Rejestracja: 29 listopada 2009, 23:14

Post autor: s4per »

Ja z tą wersją sterowników (285.05.09) też miałem problemy. Pomogła instalacja wersji beta (290.06)
x86_64 lub x86.
Awatar użytkownika
Buzzard
Posty: 12
Rejestracja: 13 stycznia 2007, 22:33
Lokalizacja: Wrocław

Post autor: Buzzard »

Niestety, na wersji 290.06 to samo.
fnmirk
Senior Member
Posty: 8295
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

W jakim celu używasz pliku /etc/X11/xorg.conf i próbujesz dublować niektóre informacje o sterownikach? Ten plik w tak rozbudowanej formie nie jest do szczęścia potrzebny. Nie jest w ogóle potrzebny kiedy korzystasz z otwartych sterowników. Natomiast sterowniki zamknięte wymagają czasem tylko niektórych opcji. Tworzą plik z odpowiednimi wpisami.

Przedstaw wynik polecenia:

Kod: Zaznacz cały

dpkg -l | grep firmware
Awatar użytkownika
Buzzard
Posty: 12
Rejestracja: 13 stycznia 2007, 22:33
Lokalizacja: Wrocław

Post autor: Buzzard »

Ten plik został utworzony przez instalator sterowników i w nim niczego nie zmieniałem.

Kod: Zaznacz cały

# dpkg -l | grep firmware
ii  firmware-linux-free                   3                                 Binary firmware for various drivers in the Linux kernel
fnmirk
Senior Member
Posty: 8295
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

Dodaj sekcję ,,non-free'' do pliku /etc/apt/sources.list. Wykonaj aktualizację informacji o pakietach i zainstaluj pakiet:

Kod: Zaznacz cały

firmware-linux-nonfree
http://packages.debian.org/sid/firmware-linux-nonfree
Usuń plik /etc/X11/xorg.conf i przeinstaluj sterowniki. Wykonaj restart systemu i jak nie będzie coś działać przedstaw: Xorg.0.log.
Awatar użytkownika
Buzzard
Posty: 12
Rejestracja: 13 stycznia 2007, 22:33
Lokalizacja: Wrocław

Post autor: Buzzard »

Zainstalowałem ten pakiet. Wywaliłem xorg.conf i przeinstalowałem sterowniki. GNOME uruchomił się w trybie zastępczym mimo, iż wybrałem normalny tryb. Po uruchomieniu środowiska pojawił się komunikat:

Kod: Zaznacz cały

Kernel failure message 1:
WARNING: at /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/tty/tty_ldisc.c:766 tty_ldisc_reinit+0x3f/0x6a()
Hardware name: P4M890T-M
Modules linked in: fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc nls_utf8 nls_cp437 vfat fat loop snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm snd_page_alloc snd_mpu401_uart shpchp parport_pc evdev pci_hotplug pcspkr snd_seq_midi snd_seq_midi_event i2c_viapro i2c_core parport snd_rawmidi snd_seq snd_timer button snd_seq_device snd soundcore processor ext4 mbcache jbd2 crc16 sg sd_mod sr_mod cdrom crc_t10dif usbhid ata_generic hid sata_via pata_via via_rhine mii floppy libata uhci_hcd ehci_hcd usbcore thermal thermal_sys scsi_mod [last unloaded: nvidia]
Pid: 1046, comm: init Tainted: P           O 3.0.0-1-686-pae #1
Call Trace:
 [<c10360c5>] ? warn_slowpath_common+0x6a/0x7d
 [<c11c500e>] ? tty_ldisc_reinit+0x3f/0x6a
 [<c10360e5>] ? warn_slowpath_null+0xd/0x10
 [<c11c500e>] ? tty_ldisc_reinit+0x3f/0x6a
 [<c11c5474>] ? tty_ldisc_hangup+0xff/0x17a
 [<c11bf94f>] ? __tty_hangup+0xdc/0x2b9
 [<c12ada73>] ? _raw_spin_lock_irqsave+0x8/0x1e
 [<c11c0c8b>] ? disassociate_ctty+0x4d/0x1b9
 [<c10390c9>] ? do_exit+0x27c/0x633
 [<c1042474>] ? recalc_sigpending+0xf/0x2f
 [<c1042681>] ? dequeue_signal+0xb4/0x126
 [<c1039675>] ? do_group_exit+0x5c/0x7f
 [<c1043d43>] ? get_signal_to_deliver+0x36a/0x386
 [<c1007d11>] ? do_signal+0x58/0x4dc
 [<c105026c>] ? sched_clock_cpu+0x87/0x12d
 [<c1026a5b>] ? kmap_atomic_prot+0xe1/0xf6
 [<c105c24f>] ? arch_local_irq_save+0x11/0x18
 [<c12ada73>] ? _raw_spin_lock_irqsave+0x8/0x1e
 [<c104bd96>] ? remove_wait_queue+0xc/0x31
 [<c10389de>] ? do_wait+0x191/0x1c4
 [<c10398aa>] ? sys_wait4+0xa2/0xaf
 [<c103782a>] ? clear_tsk_thread_flag+0x9/0x9
 [<c1008407>] ? do_notify_resume+0x20/0x69
 [<c12addb0>] ? work_notifysig+0x13/0x1b
---[ end trace 12d8cfd3297202cb ]---


Kernel failure message 2:
------------[ cut here ]------------
WARNING: at /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/tty/tty_ldisc.c:766 tty_ldisc_reinit+0x3f/0x6a()
Hardware name: P4M890T-M
Modules linked in: fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc nls_utf8 nls_cp437 vfat fat loop snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm snd_page_alloc snd_mpu401_uart shpchp parport_pc evdev pci_hotplug pcspkr snd_seq_midi snd_seq_midi_event i2c_viapro i2c_core parport snd_rawmidi snd_seq snd_timer button snd_seq_device snd soundcore processor ext4 mbcache jbd2 crc16 sg sd_mod sr_mod cdrom crc_t10dif usbhid ata_generic hid sata_via pata_via via_rhine mii floppy libata uhci_hcd ehci_hcd usbcore thermal thermal_sys scsi_mod [last unloaded: nvidia]
Pid: 1046, comm: init Tainted: P           O 3.0.0-1-686-pae #1
Call Trace:
 [<c10360c5>] ? warn_slowpath_common+0x6a/0x7d
 [<c11c500e>] ? tty_ldisc_reinit+0x3f/0x6a
 [<c10360e5>] ? warn_slowpath_null+0xd/0x10
 [<c11c500e>] ? tty_ldisc_reinit+0x3f/0x6a
 [<c11c5474>] ? tty_ldisc_hangup+0xff/0x17a
 [<c11bf94f>] ? __tty_hangup+0xdc/0x2b9
 [<c12ada73>] ? _raw_spin_lock_irqsave+0x8/0x1e
 [<c11c0c8b>] ? disassociate_ctty+0x4d/0x1b9
 [<c10390c9>] ? do_exit+0x27c/0x633
 [<c1042474>] ? recalc_sigpending+0xf/0x2f
 [<c1042681>] ? dequeue_signal+0xb4/0x126
 [<c1039675>] ? do_group_exit+0x5c/0x7f
 [<c1043d43>] ? get_signal_to_deliver+0x36a/0x386
 [<c1007d11>] ? do_signal+0x58/0x4dc
 [<c105026c>] ? sched_clock_cpu+0x87/0x12d
 [<c1026a5b>] ? kmap_atomic_prot+0xe1/0xf6
 [<c105c24f>] ? arch_local_irq_save+0x11/0x18
 [<c12ada73>] ? _raw_spin_lock_irqsave+0x8/0x1e
 [<c104bd96>] ? remove_wait_queue+0xc/0x31
 [<c10389de>] ? do_wait+0x191/0x1c4
 [<c10398aa>] ? sys_wait4+0xa2/0xaf
 [<c103782a>] ? clear_tsk_thread_flag+0x9/0x9
 [<c1008407>] ? do_notify_resume+0x20/0x69
 [<c12addb0>] ? work_notifysig+0x13/0x1b
---[ end trace 12d8cfd3297202cb ]---

Kod: Zaznacz cały

X.Org X Server 1.11.1.902 (1.11.2 RC 2)
Release Date: 2011-10-28
[   359.212] X Protocol Version 11, Revision 0
[   359.212] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[   359.213] Current Operating System: Linux buzzard-pc 3.0.0-1-686-pae #1 SMP Sat Aug 27 16:41:03 UTC 2011 i686
[   359.213] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae root=UUID=286dc12c-2ed2-44eb-bad8-ebc1312337f6 ro single
[   359.213] Build Date: 02 November 2011  11:01:26AM
[   359.213] xorg-server 2:1.11.1.902-1 (Cyril Brulebois <[email protected]>) 
[   359.213] Current version of pixman: 0.24.0
[   359.213]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   359.213] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   359.213] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 21 11:53:53 2011
[   359.213] (==) Using config file: "/etc/X11/xorg.conf"
[   359.213] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   359.214] (==) ServerLayout "Layout0"
[   359.214] (**) |-->Screen "Screen0" (0)
[   359.214] (**) |   |-->Monitor "Monitor0"
[   359.214] (**) |   |-->Device "Device0"
[   359.214] (**) |-->Input Device "Keyboard0"
[   359.214] (**) |-->Input Device "Mouse0"
[   359.214] (==) Automatically adding devices
[   359.214] (==) Automatically enabling devices
[   359.214] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   359.214]     Entry deleted from font path.
[   359.214] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[   359.214] (==) ModulePath set to "/usr/lib/xorg/modules"
[   359.214] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   359.214] (WW) Disabling Keyboard0
[   359.214] (WW) Disabling Mouse0
[   359.214] (II) Loader magic: 0xb788f580
[   359.214] (II) Module ABI versions:
[   359.214]     X.Org ANSI C Emulation: 0.4
[   359.214]     X.Org Video Driver: 11.0
[   359.215]     X.Org XInput driver : 13.0
[   359.215]     X.Org Server Extension : 6.0
[   359.216] (--) PCI:*(0:2:0:0) 10de:01d1:1043:8212 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[   359.216] (II) Open ACPI successful (/var/run/acpid.socket)
[   359.219] (II) "extmod" will be loaded by default.
[   359.219] (II) "dbe" will be loaded by default.
[   359.219] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   359.219] (II) "record" will be loaded by default.
[   359.219] (II) "dri" will be loaded by default.
[   359.219] (II) "dri2" will be loaded by default.
[   359.219] (II) LoadModule: "glx"
[   359.220] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   359.274] (II) Module glx: vendor="NVIDIA Corporation"
[   359.274]     compiled for 4.0.2, module version = 1.0.0
[   359.274]     Module class: X.Org Server Extension
[   359.274] (II) NVIDIA GLX Module  290.06  Mon Oct 31 10:12:40 PDT 2011
[   359.274] (II) Loading extension GLX
[   359.274] (II) LoadModule: "extmod"
[   359.275] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   359.275] (II) Module extmod: vendor="X.Org Foundation"
[   359.275]     compiled for 1.11.1.902, module version = 1.0.0
[   359.275]     Module class: X.Org Server Extension
[   359.275]     ABI class: X.Org Server Extension, version 6.0
[   359.275] (II) Loading extension SELinux
[   359.275] (II) Loading extension MIT-SCREEN-SAVER
[   359.275] (II) Loading extension XFree86-VidModeExtension
[   359.275] (II) Loading extension XFree86-DGA
[   359.275] (II) Loading extension DPMS
[   359.275] (II) Loading extension XVideo
[   359.275] (II) Loading extension XVideo-MotionCompensation
[   359.275] (II) Loading extension X-Resource
[   359.275] (II) LoadModule: "dbe"
[   359.276] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   359.276] (II) Module dbe: vendor="X.Org Foundation"
[   359.276]     compiled for 1.11.1.902, module version = 1.0.0
[   359.276]     Module class: X.Org Server Extension
[   359.276]     ABI class: X.Org Server Extension, version 6.0
[   359.276] (II) Loading extension DOUBLE-BUFFER
[   359.276] (II) LoadModule: "record"
[   359.276] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   359.277] (II) Module record: vendor="X.Org Foundation"
[   359.277]     compiled for 1.11.1.902, module version = 1.13.0
[   359.277]     Module class: X.Org Server Extension
[   359.277]     ABI class: X.Org Server Extension, version 6.0
[   359.277] (II) Loading extension RECORD
[   359.277] (II) LoadModule: "dri"
[   359.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   359.277] (II) Module dri: vendor="X.Org Foundation"
[   359.277]     compiled for 1.11.1.902, module version = 1.0.0
[   359.277]     ABI class: X.Org Server Extension, version 6.0
[   359.277] (II) Loading extension XFree86-DRI
[   359.277] (II) LoadModule: "dri2"
[   359.278] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   359.278] (II) Module dri2: vendor="X.Org Foundation"
[   359.278]     compiled for 1.11.1.902, module version = 1.2.0
[   359.278]     ABI class: X.Org Server Extension, version 6.0
[   359.278] (II) Loading extension DRI2
[   359.278] (II) LoadModule: "nvidia"
[   359.278] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   359.373] (II) Module nvidia: vendor="NVIDIA Corporation"
[   359.373]     compiled for 4.0.2, module version = 1.0.0
[   359.373]     Module class: X.Org Video Driver
[   360.051] (II) NVIDIA dlloader X Driver  290.06  Mon Oct 31 09:52:55 PDT 2011
[   360.052] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   360.060] (++) using VT number 8

[   360.078] (II) Loading sub module "fb"
[   360.078] (II) LoadModule: "fb"
[   360.079] (II) Loading /usr/lib/xorg/modules/libfb.so
[   360.079] (II) Module fb: vendor="X.Org Foundation"
[   360.079]     compiled for 1.11.1.902, module version = 1.0.0
[   360.079]     ABI class: X.Org ANSI C Emulation, version 0.4
[   360.079] (II) Loading sub module "wfb"
[   360.079] (II) LoadModule: "wfb"
[   360.080] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   360.091] (II) Module wfb: vendor="X.Org Foundation"
[   360.091]     compiled for 1.11.1.902, module version = 1.0.0
[   360.091]     ABI class: X.Org ANSI C Emulation, version 0.4
[   360.091] (II) Loading sub module "ramdac"
[   360.091] (II) LoadModule: "ramdac"
[   360.091] (II) Module "ramdac" already built-in
[   360.114] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   360.114] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   360.114] (II) Loading /usr/lib/xorg/modules/libfb.so
[   360.135] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   360.135] (==) NVIDIA(0): RGB weight 888
[   360.135] (==) NVIDIA(0): Default visual is TrueColor
[   360.135] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   360.135] (**) NVIDIA(0): Enabling 2D acceleration
[   362.473] (II) NVIDIA(GPU-0): Display (LG Electronics L1918S (CRT-0)) does not support
[   362.473] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[   362.483] (II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:2:0:0 (GPU-0)
[   362.483] (--) NVIDIA(0): Memory: 262144 kBytes
[   362.483] (--) NVIDIA(0): VideoBIOS: 05.72.22.43.00
[   362.483] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   362.483] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[   362.483] (--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:2:0:0
[   362.483] (--) NVIDIA(0):     LG Electronics L1918S (CRT-0)
[   362.483] (--) NVIDIA(0): LG Electronics L1918S (CRT-0): 400.0 MHz maximum pixel clock
[   362.483] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[   362.483] (**) NVIDIA(0):     enabled on all display devices.
[   362.484] (II) NVIDIA(0): Assigned Display Device: CRT-0
[   362.484] (==) NVIDIA(0): 
[   362.484] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   362.484] (==) NVIDIA(0):     will be used as the requested mode.
[   362.484] (==) NVIDIA(0): 
[   362.484] (II) NVIDIA(0): Validated modes:
[   362.484] (II) NVIDIA(0):     "nvidia-auto-select"
[   362.484] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[   362.487] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[   362.487] (--) NVIDIA(0):     option
[   362.487] (--) Depth 24 pixmap format is 32 bpp
[   362.497] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[   362.610] (II) Loading extension NV-GLX
[   362.664] (==) NVIDIA(0): Disabling shared memory pixmaps
[   362.664] (==) NVIDIA(0): Backing store disabled
[   362.664] (==) NVIDIA(0): Silken mouse enabled
[   362.665] (**) NVIDIA(0): DPMS enabled
[   362.665] (II) Loading extension NV-CONTROL
[   362.665] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "DFP", but no
[   362.665] (WW) NVIDIA(0):     such display device could be found, or all display devices
[   362.666] (WW) NVIDIA(0):     by that name are currently unavailable.
[   362.666] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "TV", but no such
[   362.666] (WW) NVIDIA(0):     display device could be found, or all display devices by
[   362.666] (WW) NVIDIA(0):     that name are currently unavailable.
[   362.666] (II) Loading extension XINERAMA
[   362.666] (II) Loading sub module "dri2"
[   362.666] (II) LoadModule: "dri2"
[   362.666] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   362.666] (II) Module dri2: vendor="X.Org Foundation"
[   362.666]     compiled for 1.11.1.902, module version = 1.2.0
[   362.666]     ABI class: X.Org Server Extension, version 6.0
[   362.666] (II) NVIDIA(0): [DRI2] Setup complete
[   362.666] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   362.666] (==) RandR enabled
[   362.666] (II) Initializing built-in extension Generic Event Extension
[   362.666] (II) Initializing built-in extension SHAPE
[   362.666] (II) Initializing built-in extension MIT-SHM
[   362.666] (II) Initializing built-in extension XInputExtension
[   362.666] (II) Initializing built-in extension XTEST
[   362.666] (II) Initializing built-in extension BIG-REQUESTS
[   362.666] (II) Initializing built-in extension SYNC
[   362.666] (II) Initializing built-in extension XKEYBOARD
[   362.667] (II) Initializing built-in extension XC-MISC
[   362.667] (II) Initializing built-in extension SECURITY
[   362.667] (II) Initializing built-in extension XINERAMA
[   362.667] (II) Initializing built-in extension XFIXES
[   362.667] (II) Initializing built-in extension RENDER
[   362.667] (II) Initializing built-in extension RANDR
[   362.667] (II) Initializing built-in extension COMPOSITE
[   362.667] (II) Initializing built-in extension DAMAGE
[   362.667] (II) Initializing extension GLX
[   362.668] (II) SELinux: Disabled on system
[   362.773] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   362.773] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   362.773] (II) LoadModule: "evdev"
[   362.774] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   362.774] (II) Module evdev: vendor="X.Org Foundation"
[   362.774]     compiled for 1.11.0, module version = 2.6.0
[   362.774]     Module class: X.Org XInput Driver
[   362.774]     ABI class: X.Org XInput driver, version 13.0
[   362.774] (II) Using input driver 'evdev' for 'Power Button'
[   362.774] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   362.774] (**) Power Button: always reports core events
[   362.774] (**) Power Button: Device: "/dev/input/event4"
[   362.774] (--) Power Button: Found keys
[   362.774] (II) Power Button: Configuring as keyboard
[   362.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   362.774] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   362.774] (**) Option "xkb_rules" "evdev"
[   362.774] (**) Option "xkb_model" "pc105"
[   362.774] (**) Option "xkb_layout" "pl"
[   362.811] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   362.811] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   362.811] (II) Using input driver 'evdev' for 'Power Button'
[   362.811] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   362.811] (**) Power Button: always reports core events
[   362.811] (**) Power Button: Device: "/dev/input/event3"
[   362.811] (--) Power Button: Found keys
[   362.811] (II) Power Button: Configuring as keyboard
[   362.811] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[   362.811] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   362.811] (**) Option "xkb_rules" "evdev"
[   362.811] (**) Option "xkb_model" "pc105"
[   362.811] (**) Option "xkb_layout" "pl"
[   362.812] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   362.812] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   362.812] (II) Using input driver 'evdev' for 'Sleep Button'
[   362.812] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   362.812] (**) Sleep Button: always reports core events
[   362.812] (**) Sleep Button: Device: "/dev/input/event2"
[   362.812] (--) Sleep Button: Found keys
[   362.812] (II) Sleep Button: Configuring as keyboard
[   362.812] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[   362.812] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   362.812] (**) Option "xkb_rules" "evdev"
[   362.812] (**) Option "xkb_model" "pc105"
[   362.812] (**) Option "xkb_layout" "pl"
[   362.813] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event1)
[   362.813] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[   362.813] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[   362.813] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   362.813] (**) Logitech Optical USB Mouse: always reports core events
[   362.813] (**) Logitech Optical USB Mouse: Device: "/dev/input/event1"
[   362.813] (--) Logitech Optical USB Mouse: Found 3 mouse buttons
[   362.813] (--) Logitech Optical USB Mouse: Found scroll wheel(s)
[   362.813] (--) Logitech Optical USB Mouse: Found relative axes
[   362.813] (--) Logitech Optical USB Mouse: Found x and y relative axes
[   362.813] (II) Logitech Optical USB Mouse: Configuring as mouse
[   362.813] (II) Logitech Optical USB Mouse: Adding scrollwheel support
[   362.813] (**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[   362.813] (**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   362.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input1/event1"
[   362.814] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 9)
[   362.814] (II) Logitech Optical USB Mouse: initialized for relative axes.
[   362.814] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[   362.814] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[   362.814] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[   362.814] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[   362.814] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[   362.814] (II) No input driver/identifier specified (ignoring)
[   362.815] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   362.815] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   362.815] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   362.815] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   362.815] (**) AT Translated Set 2 keyboard: always reports core events
[   362.815] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   362.815] (--) AT Translated Set 2 keyboard: Found keys
[   362.815] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   362.815] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   362.815] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   362.815] (**) Option "xkb_rules" "evdev"
[   362.815] (**) Option "xkb_model" "pc105"
[   362.815] (**) Option "xkb_layout" "pl"
[   362.816] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   362.816] (II) No input driver/identifier specified (ignoring)

Kod: Zaznacz cały

# glxinfo | grep direct
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
KDE się uruchomiło z komunikatem: "Your system had a kernel failure".
fnmirk
Senior Member
Posty: 8295
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

Dlaczego sprawdzasz wynik polecenia:
&quot pisze:

Kod: Zaznacz cały

# glxinfo | grep direct
jako root? Wynikiem tego polecenia się nie zajmuj bo to strata czasu i jego wynik nie jest w ogóle wiarygodny. Zajmij się zawartością pliku: Xorg.0.log.
Musisz teraz posprzątać w systemie i zdecydować się na jakiś sterownik: zamknięty lub otwarty. Najlepiej usuń wszystkie pakiety związane z kartą grafiki (z opcją purge) i zainstaluj ponownie. Pamiętaj aby usuwać plik xorg.conf, aby był tworzony nowy a nie nadpisywany, jeżeli instalator sterownika go wymaga.

Ps. Zdecyduj się na pomoc, na jednym forum, bo inaczej skończy się to ponowną instalacją systemu. Takie, niby zabezpieczanie się na wyrost, przez zakładanie równoległych tematów na kilku forach jedynie utrudnia udzielenie pomocy.
Awatar użytkownika
Buzzard
Posty: 12
Rejestracja: 13 stycznia 2007, 22:33
Lokalizacja: Wrocław

Post autor: Buzzard »

Powróciłem do sterownika nouveau, bo przy tym całkiem dobrze działa - tyle, że bez akceleracji, niestety... Pozostaje mi tylko czekać, aż przy po jakichś aktualizacjach sterowniki nvidii zaczną działać prawidłowo. Na razie mogę zapomnieć o GNOME Shell, compizie i wszystkich programach wymagających akceleracji. GNOME działa mi tylko w trybie zastępczym. Wydaje mi się, że problemy zaczęły się od pojawienia się nouveau - wcześniej nie miałem żadnych problemów z grafiką. Widocznie mimo zablokowania tych sterowników coś z nich blokuje prawidłowe działanie zamkniętych sterowników. Spróbuję jeszcze zainstalować na innej partycji Minta. Może tam będzie ok.Dziękuję za odpowiedzi w tym wątku i pozdrawiam wszystkich. :)
ODPOWIEDZ