Prze

Zagadnienia dotyczące menadżerów okien, środowisk graficznych - X, KDE, GNOME, Fluxbox, XFCE., Compiz itp.
baslow
Posty: 24
Rejestracja: 21 października 2008, 10:36

Przełączanie z trybu graficznego do konsoli

Post autor: baslow »

Witajcie!

Zainstalowałem sobie Sida na laptopie, stare pudło Acer TM 4650 (ma z 6-7 lat).
Instalacja w trybie ekspert - z sieci.

Po zainstalowaniu nie mam tego problemu (Ctrl+Alt+F1) z X-ów przechodzę do konsoli i potem (Alt+F7) wracam do X-ów.

Doinstalowuje sobie sterowniki do karty grafiki (nvidia) i wtedy się zaczyna. W Xach grafika faktycznie działa poprawnie. W informacjach systemu mam napisane, że to jest właśnie ten sterownik co go przed chwilą doinstalowałem. Jednak wtedy przejście z X-ów do konsoli daje taki efekt, że na ekranie widzę kolorowe paski (takie jakby się zepsuła karta graficzna), powrót do X-ów (Alt+F7) powraca do poprawnie działających X-ów.

Nie mam pojęcia gdzie szukać rozwiązania problemu - wydaje mi się, że może to być coś z xorg.conf ale czy na pewno? Nie wiem.

Wyłączenie KMS nic nie daje.

Może doprecyzuje jeszcze co się dzieje.
Otóż, po zainstalowaniu Sida - miałem do karty grafiki sterownik nouveau, ale działa tak jak działa, więc. zainstalowałem sterownik nvidia.

Na pierwszym z nich nie było żadnego problemu z przechodzeniem między trybem graficznym a terminalami mojego Linuksa. Problemy zaczęły się dopiero po zainstalowaniu sterownika nvidia. Ale nie dzieje mi się to co jest opisane w tym poradników do KMS. Mnie przez cały start Linuksa idą wszystkie komunikaty na ekran, wszystko widzę co się dzieje, potem pojawia się logo nvidii i ładuje się menadżer logowania gdm3, pokazuje się okno logowania i już po ptakach. Przejście do terminala kończy się paskami. Na szczęście daje się łatwo wrócić do trybu graficznego.

Mało tego! Jak wyłączę startowanie w trybie graficznym to pojawia mi się wszystko włączenie z terminalem - mogę na nim działać i przełączać się pomiędzy wszystkimi 6 terminalami - bez problemu. W momencie jak zrobię:

Kod: Zaznacz cały

startx
i włączę okienka - kończy się zabawa - powrót do terminala tekstowego kończy się paskami - opisanymi wyżej.

Moje dane:

Kod: Zaznacz cały

uname -a

Linux silvercase 3.2.0-4-686-pae #1 SMP Debian 3.2.39-2 i686 GNU/Linux

Kod: Zaznacz cały

dpkg --print-architecture

i386

Kod: Zaznacz cały

lspci -k

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    Subsystem: Acer Incorporated [ALI] Device 007a
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
    Kernel driver in use: pcieport
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
    Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
    Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: snd_intel8x0
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: snd_intel8x0m
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
    Subsystem: Acer Incorporated [ALI] Device 007a
01:00.0 VGA compatible controller: NVIDIA Corporation NV43 [GeForce Go 6600] (rev a2)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: nvidia
06:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: firewire_ohci
06:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
    Subsystem: Acer Incorporated [ALI] Device 005e
    Kernel driver in use: tg3
06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
    Subsystem: Intel Corporation Device 2701
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: yenta_cardbus
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
    Subsystem: Acer Incorporated [ALI] Device 007a
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: sdhci-pci
06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
    Subsystem: Acer Incorporated [ALI] Device 007a
06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
    Subsystem: Acer Incorporated [ALI] Device 007a
    Kernel driver in use: sdhci-pci

Kod: Zaznacz cały

cat /var/log/Xorg.0.log

[    23.729] X.Org X Server 1.12.4 Release Date: 2012-08-27
[    23.729] X Protocol Version 11, Revision 0
[    23.729] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    23.729] Current Operating System: Linux silvercase 3.2.0-4-686-pae #1 SMP Debian 3.2.39-2 i686
[    23.729] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=b31276a3-bfdd-4df1-bff2-d785732151cb ro quiet splash
[    23.729] Build Date: 23 February 2013  06:25:22PM
[    23.729] xorg-server 2:1.12.4-5 (Julien Cristau <[email protected]>) 
[    23.729] Current version of pixman: 0.26.0
[    23.729]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    23.729] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.729] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 12 20:32:30 2013
[    23.795] (==) Using config file: "/etc/X11/xorg.conf"
[    23.795] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.825] (==) ServerLayout "Layout0"
[    23.825] (**) |-->Screen "Screen0" (0)
[    23.825] (**) |   |-->Monitor "Monitor0"
[    23.847] (**) |   |-->Device "Device0"
[    23.847] (**) |-->Input Device "Keyboard0"
[    23.847] (**) |-->Input Device "Mouse0"
[    23.847] (**) Option "Xinerama" "0"
[    23.847] (==) Automatically adding devices
[    23.847] (==) Automatically enabling devices
[    23.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.889]     Entry deleted from font path.
[    24.186] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    24.186]     Entry deleted from font path.
[    24.186] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    24.186] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.186] (**) Extension "Composite" is enabled
[    24.186] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    24.186] (WW) Disabling Keyboard0
[    24.186] (WW) Disabling Mouse0
[    24.186] (II) Loader magic: 0xb77f25a0
[    24.186] (II) Module ABI versions:
[    24.186]     X.Org ANSI C Emulation: 0.4
[    24.186]     X.Org Video Driver: 12.1
[    24.186]     X.Org XInput driver : 16.0
[    24.186]     X.Org Server Extension : 6.0
[    24.188] (--) PCI:*(0:1:0:0) 10de:0148:1025:007a rev 162, Mem @ 0xc0000000/67108864, 0x90000000/268435456, 0xc4000000/16777216, BIOS @ 0x????????/131072
[    24.188] (II) Open ACPI successful (/var/run/acpid.socket)
[    24.189] (II) LoadModule: "extmod"
[    24.357] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    24.384] (II) Module extmod: vendor="X.Org Foundation"
[    24.384]     compiled for 1.12.4, module version = 1.0.0
[    24.384]     Module class: X.Org Server Extension
[    24.384]     ABI class: X.Org Server Extension, version 6.0
[    24.384] (II) Loading extension SELinux
[    24.384] (II) Loading extension MIT-SCREEN-SAVER
[    24.384] (II) Loading extension XFree86-VidModeExtension
[    24.384] (II) Loading extension XFree86-DGA
[    24.384] (II) Loading extension DPMS
[    24.384] (II) Loading extension XVideo
[    24.384] (II) Loading extension XVideo-MotionCompensation
[    24.384] (II) Loading extension X-Resource
[    24.384] (II) LoadModule: "dbe"
[    24.385] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    24.390] (II) Module dbe: vendor="X.Org Foundation"
[    24.390]     compiled for 1.12.4, module version = 1.0.0
[    24.390]     Module class: X.Org Server Extension
[    24.390]     ABI class: X.Org Server Extension, version 6.0
[    24.390] (II) Loading extension DOUBLE-BUFFER
[    24.390] (II) LoadModule: "glx"
[    24.390] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    26.388] (II) Module glx: vendor="NVIDIA Corporation"
[    26.388]     compiled for 4.0.2, module version = 1.0.0
[    26.388]     Module class: X.Org Server Extension
[    26.388] (II) NVIDIA GLX Module  304.64  Tue Oct 30 11:31:18 PDT 2012
[    26.388] (II) Loading extension GLX
[    26.388] (II) LoadModule: "record"
[    26.388] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    26.410] (II) Module record: vendor="X.Org Foundation"
[    26.410]     compiled for 1.12.4, module version = 1.13.0
[    26.410]     Module class: X.Org Server Extension
[    26.410]     ABI class: X.Org Server Extension, version 6.0
[    26.410] (II) Loading extension RECORD
[    26.410] (II) LoadModule: "dri"
[    26.410] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    26.421] (II) Module dri: vendor="X.Org Foundation"
[    26.421]     compiled for 1.12.4, module version = 1.0.0
[    26.421]     ABI class: X.Org Server Extension, version 6.0
[    26.421] (II) Loading extension XFree86-DRI
[    26.421] (II) LoadModule: "dri2"
[    26.421] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    26.434] (II) Module dri2: vendor="X.Org Foundation"
[    26.434]     compiled for 1.12.4, module version = 1.2.0
[    26.434]     ABI class: X.Org Server Extension, version 6.0
[    26.434] (II) Loading extension DRI2
[    26.434] (II) LoadModule: "nvidia"
[    26.804] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    27.109] (II) Module nvidia: vendor="NVIDIA Corporation"
[    27.109]     compiled for 4.0.2, module version = 1.0.0
[    27.109]     Module class: X.Org Video Driver
[    27.215] (II) NVIDIA dlloader X Driver  304.64  Tue Oct 30 11:11:05 PDT 2012
[    27.215] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    27.229] (++) using VT number 8


[    27.427] (II) Loading sub module "fb"
[    27.427] (II) LoadModule: "fb"
[    27.428] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.513] (II) Module fb: vendor="X.Org Foundation"
[    27.513]     compiled for 1.12.4, module version = 1.0.0
[    27.513]     ABI class: X.Org ANSI C Emulation, version 0.4
[    27.513] (II) Loading sub module "wfb"
[    27.513] (II) LoadModule: "wfb"
[    27.513] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    27.586] (II) Module wfb: vendor="X.Org Foundation"
[    27.586]     compiled for 1.12.4, module version = 1.0.0
[    27.587]     ABI class: X.Org ANSI C Emulation, version 0.4
[    27.587] (II) Loading sub module "ramdac"
[    27.587] (II) LoadModule: "ramdac"
[    27.587] (II) Module "ramdac" already built-in
[    27.687] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    27.687] (==) NVIDIA(0): RGB weight 888
[    27.687] (==) NVIDIA(0): Default visual is TrueColor
[    27.687] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    27.687] (**) NVIDIA(0): Option "Stereo" "0"
[    27.688] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[    27.688] (**) NVIDIA(0): Stereo disabled by request
[    27.688] (**) NVIDIA(0): Option "MetaModes" "1400x1050 +0+0; 1280x960 +0+0; 1024x768 +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0; nvidia-auto-select +0+0"
[    27.688] (**) NVIDIA(0): Enabling 2D acceleration
[    28.975] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
[    28.975] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    29.015] (II) NVIDIA(0): NVIDIA GPU GeForce Go 6600 (NV43) at PCI:1:0:0 (GPU-0)
[    29.015] (--) NVIDIA(0): Memory: 65536 kBytes
[    29.015] (--) NVIDIA(0): VideoBIOS: 05.43.02.64.17
[    29.015] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    29.016] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    29.016] (--) NVIDIA(0): Valid display device(s) on GeForce Go 6600 at PCI:1:0:0
[    29.016] (--) NVIDIA(0):     CRT-0
[    29.016] (--) NVIDIA(0):     TV-0
[    29.016] (--) NVIDIA(0):     AU Optronics Corporation (DFP-0) (connected)
[    29.016] (--) NVIDIA(0):     DFP-1
[    29.016] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    29.016] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    29.016] (--) NVIDIA(0): TV encoder: (null)
[    29.016] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): 310.0 MHz maximum pixel clock
[    29.016] (--) NVIDIA(0): AU Optronics Corporation (DFP-0): Internal Dual Link LVDS
[    29.016] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[    29.016] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    29.016] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    29.016] (**) NVIDIA(0):     device AU Optronics Corporation (DFP-0) (Using EDID
[    29.016] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    29.060] (WW) NVIDIA(0): No valid modes for "1280x960+0+0"; removing.
[    29.061] (WW) NVIDIA(0): No valid modes for "1024x768+0+0"; removing.
[    29.061] (II) NVIDIA(0): Validated MetaModes:
[    29.061] (II) NVIDIA(0):     "1400x1050+0+0"
[    29.061] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    29.061] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    29.061] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    29.061] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    29.061] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    29.061] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    29.061] (II) NVIDIA(0): Virtual screen size determined to be 1400 x 1050
[    29.062] (WW) NVIDIA(0): Unable to support custom viewPortOut 1312 x 1050 +44 +0
[    29.063] (WW) NVIDIA(0): Unable to support custom viewPortOut 1400 x 787 +0 +131
[    29.065] (WW) NVIDIA(0): Unable to support custom viewPortOut 1400 x 1050 +0 +0
[    29.066] (WW) NVIDIA(0): Unable to support custom viewPortOut 1400 x 1050 +0 +0
[    29.067] (WW) NVIDIA(0): Unable to support custom viewPortOut 1400 x 1050 +0 +0
[    29.067] (WW) NVIDIA(0): Unable to support custom viewPortOut 1400 x 787 +0 +131
[    29.069] (--) NVIDIA(0): DPI set to (118, 115); computed from "UseEdidDpi" X config
[    29.069] (--) NVIDIA(0):     option
[    29.069] (--) Depth 24 pixmap format is 32 bpp
[    29.101] (II) NVIDIA(0): Setting mode "1400x1050+0+0"
[    30.690] (II) Loading extension NV-GLX
[    30.893] (==) NVIDIA(0): Disabling shared memory pixmaps
[    30.893] (==) NVIDIA(0): Backing store disabled
[    30.893] (==) NVIDIA(0): Silken mouse enabled
[    30.893] (**) NVIDIA(0): DPMS enabled
[    30.894] (II) Loading extension NV-CONTROL
[    30.894] (II) Loading extension XINERAMA
[    30.894] (II) Loading sub module "dri2"
[    30.894] (II) LoadModule: "dri2"
[    30.894] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    30.895] (II) Module dri2: vendor="X.Org Foundation"
[    30.895]     compiled for 1.12.4, module version = 1.2.0
[    30.895]     ABI class: X.Org Server Extension, version 6.0
[    30.895] (II) NVIDIA(0): [DRI2] Setup complete
[    30.895] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    30.895] (--) RandR disabled
[    30.895] (II) Initializing built-in extension Generic Event Extension
[    30.895] (II) Initializing built-in extension SHAPE
[    30.895] (II) Initializing built-in extension MIT-SHM
[    30.895] (II) Initializing built-in extension XInputExtension
[    30.895] (II) Initializing built-in extension XTEST
[    30.895] (II) Initializing built-in extension BIG-REQUESTS
[    30.895] (II) Initializing built-in extension SYNC
[    30.895] (II) Initializing built-in extension XKEYBOARD
[    30.895] (II) Initializing built-in extension XC-MISC
[    30.895] (II) Initializing built-in extension SECURITY
[    30.895] (II) Initializing built-in extension XINERAMA
[    30.895] (II) Initializing built-in extension XFIXES
[    30.895] (II) Initializing built-in extension RENDER
[    30.895] (II) Initializing built-in extension RANDR
[    30.895] (II) Initializing built-in extension COMPOSITE
[    30.895] (II) Initializing built-in extension DAMAGE
[    30.895] (II) SELinux: Disabled on system
[    30.918] (II) Initializing extension GLX
[    32.130] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    32.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.130] (II) LoadModule: "evdev"
[    32.160] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.176] (II) Module evdev: vendor="X.Org Foundation"
[    32.176]     compiled for 1.12.1, module version = 2.7.0
[    32.176]     Module class: X.Org XInput Driver
[    32.176]     ABI class: X.Org XInput driver, version 16.0
[    32.176] (II) Using input driver 'evdev' for 'Power Button'
[    32.176] (**) Power Button: always reports core events
[    32.176] (**) evdev: Power Button: Device: "/dev/input/event5"
[    32.176] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.176] (--) evdev: Power Button: Found keys
[    32.176] (II) evdev: Power Button: Configuring as keyboard
[    32.176] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    32.176] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.176] (**) Option "xkb_rules" "evdev"
[    32.176] (**) Option "xkb_model" "pc105"
[    32.177] (**) Option "xkb_layout" "pl"
[    32.315] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    32.315] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.316] (II) Using input driver 'evdev' for 'Video Bus'
[    32.316] (**) Video Bus: always reports core events
[    32.316] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    32.316] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    32.316] (--) evdev: Video Bus: Found keys
[    32.316] (II) evdev: Video Bus: Configuring as keyboard
[    32.316] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event6"
[    32.316] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    32.316] (**) Option "xkb_rules" "evdev"
[    32.316] (**) Option "xkb_model" "pc105"
[    32.316] (**) Option "xkb_layout" "pl"
[    32.317] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.317] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.317] (II) Using input driver 'evdev' for 'Power Button'
[    32.317] (**) Power Button: always reports core events
[    32.318] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.318] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.318] (--) evdev: Power Button: Found keys
[    32.318] (II) evdev: Power Button: Configuring as keyboard
[    32.318] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    32.318] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    32.318] (**) Option "xkb_rules" "evdev"
[    32.318] (**) Option "xkb_model" "pc105"
[    32.318] (**) Option "xkb_layout" "pl"
[    32.319] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    32.319] (II) No input driver specified, ignoring this device.
[    32.319] (II) This device may have been added with another device file.
[    32.323] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    32.323] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.323] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.323] (**) Sleep Button: always reports core events
[    32.323] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    32.323] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.323] (--) evdev: Sleep Button: Found keys
[    32.323] (II) evdev: Sleep Button: Configuring as keyboard
[    32.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[    32.323] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    32.323] (**) Option "xkb_rules" "evdev"
[    32.323] (**) Option "xkb_model" "pc105"
[    32.323] (**) Option "xkb_layout" "pl"
[    32.325] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[    32.325] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[    32.325] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[    32.325] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    32.325] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[    32.325] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc00e
[    32.325] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[    32.325] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[    32.325] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[    32.325] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[    32.325] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    32.325] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[    32.325] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[    32.325] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.326] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input1/event1"
[    32.326] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 10)
[    32.326] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[    32.326] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[    32.326] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[    32.326] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    32.326] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    32.327] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    32.327] (II) No input driver specified, ignoring this device.
[    32.327] (II) This device may have been added with another device file.
[    32.332] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    32.332] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    32.332] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    32.332] (**) AT Translated Set 2 keyboard: always reports core events
[    32.332] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    32.332] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    32.332] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    32.332] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    32.332] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    32.332] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    32.332] (**) Option "xkb_rules" "evdev"
[    32.332] (**) Option "xkb_model" "pc105"
[    32.332] (**) Option "xkb_layout" "pl"
[    32.336] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[    32.336] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    32.336] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    32.336] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    32.336] (II) LoadModule: "synaptics"
[    32.337] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    32.358] (II) Module synaptics: vendor="X.Org Foundation"
[    32.358]     compiled for 1.12.4, module version = 1.6.2
[    32.358]     Module class: X.Org XInput Driver
[    32.358]     ABI class: X.Org XInput driver, version 16.0
[    32.358] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    32.358] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.358] (**) Option "Device" "/dev/input/event8"
[    32.358] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    32.358] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    32.358] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    32.358] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    32.358] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[    32.358] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    32.359] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    32.359] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.359] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[    32.359] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    32.359] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    32.359] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    32.359] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    32.359] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    32.359] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    32.359] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    32.359] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    32.360] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    32.360] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    32.360] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    32.361] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    32.361] (II) No input driver specified, ignoring this device.
[    32.361] (II) This device may have been added with another device file.
[    32.363] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event9)
[    32.363] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    32.363] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    32.363] (**) ACPI Virtual Keyboard Device: always reports core events
[    32.363] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event9"
[    32.363] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    32.363] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    32.363] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    32.363] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[    32.363] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[    32.363] (**) Option "xkb_rules" "evdev"
[    32.363] (**) Option "xkb_model" "pc105"
[    32.363] (**) Option "xkb_layout" "pl"
[    32.498] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
[    32.498] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    32.498] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.498] (**) NVIDIA(0):     device AU Optronics Corporation (DFP-0) (Using EDID
[    32.498] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    39.617] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
[    39.617] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    39.617] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    39.617] (**) NVIDIA(0):     device AU Optronics Corporation (DFP-0) (Using EDID
[    39.617] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   214.273] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
[   214.273] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[   214.273] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   214.273] (**) NVIDIA(0):     device AU Optronics Corporation (DFP-0) (Using EDID
[   214.273] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   216.704] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
[   216.704] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[   216.704] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   216.704] (**) NVIDIA(0):     device AU Optronics Corporation (DFP-0) (Using EDID
[   216.704] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   223.123] (II) NVIDIA(GPU-0): Display (AU Optronics Corporation (DFP-0)) does not support
[   223.123] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[   223.123] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   223.123] (**) NVIDIA(0):     device AU Optronics Corporation (DFP-0) (Using EDID
[   223.123] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[  1078.503] (II) Open ACPI successful (/var/run/acpid.socket)
[  1078.725] (II) NVIDIA(0): Setting mode "1400x1050+0+0"
[  1080.260] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
Nie wiem co jeszcze może pomóc w analizie mojego problemu - jak coś tylko mogę zebrać jeszcze z komputera - dajcie znać co.
Awatar użytkownika
Rafal_F
Moderator
Posty: 2350
Rejestracja: 29 sierpnia 2008, 16:45

Post autor: Rafal_F »

Ze sterownikami własnościowymi nvidii tak czasem bywa. Spróbuj tego: http://dug.net.pl/tekst/90/uvesafb_w_debianie/
fnmirk
Senior Member
Posty: 8295
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

Według mnie, masz dwie karty graficzne w komputerze i musisz jedną z nich wyłączyć lub spróbować doinstalować dodatkowe oprogramowanie. Jest o tym kilka tematów na forum.
ODPOWIEDZ