Witam.
Z uwagi na to, że jestem tu początkujący, toteż proszę o wyrozumiałość gdyż gdybym był w stanie sam sobie poradzić z tym problemem to dawno bym tego dokonał i nie zawracałbym Wam głowy..
Mam dwa monitory - pierwszy standardowy CRT (Samsung SyncMaster 795df) i drugi LCD (LG Flatron L1715s). Podłączone są do karty graficznej ASUS GeForce 210 (NVIDIA). CRT standardowo pod VGA (D-SUB) a LCD pod DVI ale przez adapter VGA (D-SUB) - DVI.
Na początku miałem problemy z monitorem podłączonym przez adapter bo obraz co chwilę się wyłączał więc przeinstalowałem sterowniki NVIDII i tu zaczęły się problemy. Przed instalacją sterowników monitor LCD miał spokojnie rozdzielczość 1024x768 (mimo iż może mieć większą) a po instalacji jedyne co może osiągnąć to 640x480. Poczytałem na kilku forach, że jest to ponoć związane z adapterem i że DVI nie odbiera sygnałów cyfrowych od LCD. Próbowałem zmienić ustawienia według tamtych porad ale w chwili kiedy uruchomiłem Linuksa ponownie i rozdzielczość na obu monitorach była 640x480 pikseli to stwierdziłem, że jednak sam nie dam rady. Przywróciłem konfigurację do poprzedniej i obecnie mam CRT 1280x1024 oraz LCD 640x480 a chciałbym aby oba miały taką samą.
W związku z tym mam prośbę do Was związaną z konfiguracją - jak dokonać tego aby oba monitory działały z normalnymi możliwościami wiem że jest to możliwe.
Z dodatkowych informacji dodam, że pod Windowsem oba monitory mają normalne rozdzielczości a używam standardowych sterowników z Windowsa 7.
[+] Dwa monitory - ustawienie monitora LCD (VGA / D-SUB)
Wklej log:
Kod: Zaznacz cały
/var/log/Xorg.0.log/var/log/Xorg.0.log
/var/log/Xorg.1.log
Kod: Zaznacz cały
[ 22.103]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 22.103] X Protocol Version 11, Revision 0
[ 22.103] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 22.103] Current Operating System: Linux Frankenstein-PC 3.2.0-4-686-pae #1 SMP Debian 3.2.46-1+deb7u1 i686
[ 22.103] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=61a1e2b0-442c-4532-8e17-3d1dcdaa8c81 ro quiet
[ 22.103] Build Date: 17 April 2013 11:13:16AM
[ 22.103] xorg-server 2:1.12.4-6 (Julien Cristau <[email protected]>)
[ 22.103] Current version of pixman: 0.26.0
[ 22.103] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.103] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.103] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 18 20:55:13 2013
[ 22.137] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.137] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.350] (==) ServerLayout "Layout0"
[ 22.350] (**) |-->Screen "Screen0" (0)
[ 22.350] (**) | |-->Monitor "Monitor0"
[ 22.351] (**) | |-->Device "Device0"
[ 22.351] (**) |-->Input Device "Keyboard0"
[ 22.351] (**) |-->Input Device "Mouse0"
[ 22.351] (**) Option "Xinerama" "0"
[ 22.351] (==) Automatically adding devices
[ 22.351] (==) Automatically enabling devices
[ 22.421] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 22.421] Entry deleted from font path.
[ 22.440] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 22.440] Entry deleted from font path.
[ 22.440] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 22.440] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.440] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 22.440] (WW) Disabling Keyboard0
[ 22.440] (WW) Disabling Mouse0
[ 22.440] (II) Loader magic: 0xb77e55a0
[ 22.440] (II) Module ABI versions:
[ 22.440] X.Org ANSI C Emulation: 0.4
[ 22.440] X.Org Video Driver: 12.1
[ 22.440] X.Org XInput driver : 16.0
[ 22.440] X.Org Server Extension : 6.0
[ 22.441] (--) PCI:*(0:1:0:0) 10de:0a65:1043:83f4 rev 162, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xdc000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/524288
[ 22.441] (II) Open ACPI successful (/var/run/acpid.socket)
[ 22.441] (II) LoadModule: "extmod"
[ 22.463] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.476] (II) Module extmod: vendor="X.Org Foundation"
[ 22.476] compiled for 1.12.4, module version = 1.0.0
[ 22.476] Module class: X.Org Server Extension
[ 22.476] ABI class: X.Org Server Extension, version 6.0
[ 22.476] (II) Loading extension SELinux
[ 22.476] (II) Loading extension MIT-SCREEN-SAVER
[ 22.476] (II) Loading extension XFree86-VidModeExtension
[ 22.476] (II) Loading extension XFree86-DGA
[ 22.476] (II) Loading extension DPMS
[ 22.477] (II) Loading extension XVideo
[ 22.477] (II) Loading extension XVideo-MotionCompensation
[ 22.477] (II) Loading extension X-Resource
[ 22.477] (II) LoadModule: "dbe"
[ 22.477] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.487] (II) Module dbe: vendor="X.Org Foundation"
[ 22.487] compiled for 1.12.4, module version = 1.0.0
[ 22.487] Module class: X.Org Server Extension
[ 22.487] ABI class: X.Org Server Extension, version 6.0
[ 22.487] (II) Loading extension DOUBLE-BUFFER
[ 22.487] (II) LoadModule: "glx"
[ 22.487] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 24.319] (II) Module glx: vendor="NVIDIA Corporation"
[ 24.319] compiled for 4.0.2, module version = 1.0.0
[ 24.319] Module class: X.Org Server Extension
[ 24.319] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:51:59 PDT 2013
[ 24.319] (II) Loading extension GLX
[ 24.319] (II) LoadModule: "record"
[ 24.319] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.504] (II) Module record: vendor="X.Org Foundation"
[ 24.504] compiled for 1.12.4, module version = 1.13.0
[ 24.504] Module class: X.Org Server Extension
[ 24.504] ABI class: X.Org Server Extension, version 6.0
[ 24.504] (II) Loading extension RECORD
[ 24.504] (II) LoadModule: "dri"
[ 24.504] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.569] (II) Module dri: vendor="X.Org Foundation"
[ 24.569] compiled for 1.12.4, module version = 1.0.0
[ 24.569] ABI class: X.Org Server Extension, version 6.0
[ 24.569] (II) Loading extension XFree86-DRI
[ 24.569] (II) LoadModule: "dri2"
[ 24.569] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.571] (II) Module dri2: vendor="X.Org Foundation"
[ 24.571] compiled for 1.12.4, module version = 1.2.0
[ 24.571] ABI class: X.Org Server Extension, version 6.0
[ 24.571] (II) Loading extension DRI2
[ 24.571] (II) LoadModule: "nvidia"
[ 24.622] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 24.833] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 24.833] compiled for 4.0.2, module version = 1.0.0
[ 24.833] Module class: X.Org Video Driver
[ 24.905] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:32:42 PDT 2013
[ 24.905] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 24.912] (++) using VT number 7
[ 24.928] (II) Loading sub module "fb"
[ 24.928] (II) LoadModule: "fb"
[ 24.928] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.939] (II) Module fb: vendor="X.Org Foundation"
[ 24.939] compiled for 1.12.4, module version = 1.0.0
[ 24.939] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.939] (II) Loading sub module "wfb"
[ 24.939] (II) LoadModule: "wfb"
[ 24.939] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 24.946] (II) Module wfb: vendor="X.Org Foundation"
[ 24.946] compiled for 1.12.4, module version = 1.0.0
[ 24.946] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.946] (II) Loading sub module "ramdac"
[ 24.946] (II) LoadModule: "ramdac"
[ 24.946] (II) Module "ramdac" already built-in
[ 24.956] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 24.956] (==) NVIDIA(0): RGB weight 888
[ 24.956] (==) NVIDIA(0): Default visual is TrueColor
[ 24.957] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 24.957] (**) NVIDIA(0): Option "Stereo" "0"
[ 24.957] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[ 24.957] (**) NVIDIA(0): Stereo disabled by request
[ 24.962] (**) NVIDIA(0): Option "MetaModes" "CRT-1: 1280x1024_75 +0+0; CRT-0: 320x240 +0+0; CRT-0: nvidia-auto-select +0+0"
[ 24.962] (**) NVIDIA(0): Enabling 2D acceleration
[ 25.675] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 25.690] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 25.690] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 25.692] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[ 25.692] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 25.692] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.06
[ 25.692] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 25.692] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 25.694] (--) NVIDIA(0): Valid display device(s) on GeForce 210 at PCI:1:0:0
[ 25.694] (--) NVIDIA(0): CRT-0 (connected)
[ 25.694] (--) NVIDIA(0): Samsung SyncMaster (CRT-1) (connected)
[ 25.694] (--) NVIDIA(0): DFP-0
[ 25.694] (--) NVIDIA(0): DFP-1
[ 25.694] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 25.694] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 25.694] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 25.694] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 25.694] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 25.694] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 25.694] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 25.694] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 25.694] (**) NVIDIA(0): all display devices.)
[ 25.695] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 25.695] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 25.695] (**) NVIDIA(0): has been enabled on all display devices.)
[ 25.699] (II) NVIDIA(0): Validated MetaModes:
[ 25.699] (II) NVIDIA(0): "CRT-1:1280x1024_75+0+0"
[ 25.699] (II) NVIDIA(0): "CRT-0:320x240+0+0"
[ 25.699] (II) NVIDIA(0): "CRT-0:nvidia-auto-select+0+0"
[ 25.699] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 25.729] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 25.729] (WW) NVIDIA(0): from CRT-0's EDID.
[ 25.729] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 25.729] (--) Depth 24 pixmap format is 32 bpp
[ 25.729] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 25.743] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 25.795] (II) Loading extension NV-GLX
[ 25.828] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 25.828] (==) NVIDIA(0): Backing store disabled
[ 25.828] (==) NVIDIA(0): Silken mouse enabled
[ 25.829] (**) NVIDIA(0): DPMS enabled
[ 25.829] (II) Loading extension NV-CONTROL
[ 25.829] (II) Loading extension XINERAMA
[ 25.829] (II) Loading sub module "dri2"
[ 25.829] (II) LoadModule: "dri2"
[ 25.829] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.829] (II) Module dri2: vendor="X.Org Foundation"
[ 25.829] compiled for 1.12.4, module version = 1.2.0
[ 25.829] ABI class: X.Org Server Extension, version 6.0
[ 25.829] (II) NVIDIA(0): [DRI2] Setup complete
[ 25.829] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 25.829] (--) RandR disabled
[ 25.829] (II) Initializing built-in extension Generic Event Extension
[ 25.829] (II) Initializing built-in extension SHAPE
[ 25.829] (II) Initializing built-in extension MIT-SHM
[ 25.829] (II) Initializing built-in extension XInputExtension
[ 25.829] (II) Initializing built-in extension XTEST
[ 25.829] (II) Initializing built-in extension BIG-REQUESTS
[ 25.829] (II) Initializing built-in extension SYNC
[ 25.829] (II) Initializing built-in extension XKEYBOARD
[ 25.829] (II) Initializing built-in extension XC-MISC
[ 25.829] (II) Initializing built-in extension SECURITY
[ 25.830] (II) Initializing built-in extension XINERAMA
[ 25.830] (II) Initializing built-in extension XFIXES
[ 25.830] (II) Initializing built-in extension RENDER
[ 25.830] (II) Initializing built-in extension RANDR
[ 25.830] (II) Initializing built-in extension COMPOSITE
[ 25.830] (II) Initializing built-in extension DAMAGE
[ 25.830] (II) SELinux: Disabled on system
[ 25.833] (II) Initializing extension GLX
[ 26.130] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 26.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.130] (II) LoadModule: "evdev"
[ 26.131] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.140] (II) Module evdev: vendor="X.Org Foundation"
[ 26.140] compiled for 1.12.1, module version = 2.7.0
[ 26.140] Module class: X.Org XInput Driver
[ 26.140] ABI class: X.Org XInput driver, version 16.0
[ 26.140] (II) Using input driver 'evdev' for 'Power Button'
[ 26.140] (**) Power Button: always reports core events
[ 26.140] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 26.140] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.140] (--) evdev: Power Button: Found keys
[ 26.140] (II) evdev: Power Button: Configuring as keyboard
[ 26.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 26.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.140] (**) Option "xkb_rules" "evdev"
[ 26.140] (**) Option "xkb_model" "evdev"
[ 26.140] (**) Option "xkb_layout" "pl"
[ 26.186] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 26.186] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.186] (II) Using input driver 'evdev' for 'Power Button'
[ 26.186] (**) Power Button: always reports core events
[ 26.186] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 26.186] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.186] (--) evdev: Power Button: Found keys
[ 26.186] (II) evdev: Power Button: Configuring as keyboard
[ 26.186] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[ 26.186] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 26.186] (**) Option "xkb_rules" "evdev"
[ 26.186] (**) Option "xkb_model" "evdev"
[ 26.186] (**) Option "xkb_layout" "pl"
[ 26.187] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[ 26.187] (II) No input driver specified, ignoring this device.
[ 26.187] (II) This device may have been added with another device file.
[ 26.187] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 26.187] (II) No input driver specified, ignoring this device.
[ 26.187] (II) This device may have been added with another device file.
[ 26.188] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[ 26.188] (II) No input driver specified, ignoring this device.
[ 26.188] (II) This device may have been added with another device file.
[ 26.188] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[ 26.188] (II) No input driver specified, ignoring this device.
[ 26.188] (II) This device may have been added with another device file.
[ 26.189] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0)
[ 26.189] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 26.189] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 26.189] (**) USB OPTICAL MOUSE: always reports core events
[ 26.189] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 26.189] (--) evdev: USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4e
[ 26.189] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
[ 26.189] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 26.189] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 26.189] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 26.189] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 26.189] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 26.189] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 26.189] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.189] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/input/input0/event0"
[ 26.189] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 8)
[ 26.189] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 26.189] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 26.189] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 26.189] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 26.189] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 26.189] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 26.189] (II) No input driver specified, ignoring this device.
[ 26.189] (II) This device may have been added with another device file.
[ 26.190] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event1)
[ 26.190] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 26.190] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 26.190] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 26.190] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event1"
[ 26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 26.190] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 26.190] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 26.190] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 26.190] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 26.190] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.190] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-2/2-2:1.2/0003:046D:C52B.0004/input/input1/event1"
[ 26.190] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 9)
[ 26.190] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 26.190] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 26.190] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 26.190] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 26.190] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 26.191] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse1)
[ 26.191] (II) No input driver specified, ignoring this device.
[ 26.191] (II) This device may have been added with another device file.
[ 26.191] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 26.191] (II) No input driver specified, ignoring this device.
[ 26.191] (II) This device may have been added with another device file.
[ 26.192] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[ 26.192] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.192] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[ 26.192] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[ 26.192] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event2"
[ 26.192] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[ 26.192] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[ 26.192] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[ 26.192] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input2/event2"
[ 26.192] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 10)
[ 26.192] (**) Option "xkb_rules" "evdev"
[ 26.192] (**) Option "xkb_model" "evdev"
[ 26.192] (**) Option "xkb_layout" "pl"
[ 26.193] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event3)
[ 26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.193] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[ 26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[ 26.193] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event3"
[ 26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[ 26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found 1 mouse buttons
[ 26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found scroll wheel(s)
[ 26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found relative axes
[ 26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found x and y relative axes
[ 26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found absolute axes
[ 26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Forcing absolute x/y axes to exist.
[ 26.193] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[ 26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as mouse
[ 26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[ 26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Adding scrollwheel support
[ 26.193] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[ 26.193] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 26.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.1/input/input3/event3"
[ 26.193] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 11)
[ 26.193] (**) Option "xkb_rules" "evdev"
[ 26.193] (**) Option "xkb_model" "evdev"
[ 26.193] (**) Option "xkb_layout" "pl"
[ 26.193] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: initialized for relative axes.
[ 26.193] (WW) evdev: Plus More Enterprise LTD. USB-compliant keyboard: ignoring absolute axes.
[ 26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) keeping acceleration scheme 1
[ 26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration profile 0
[ 26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration factor: 2.000
[ 26.193] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration threshold: 4
[ 26.194] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/mouse2)
[ 26.194] (II) No input driver specified, ignoring this device.
[ 26.194] (II) This device may have been added with another device file.
[ 26.194] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 26.194] (II) No input driver specified, ignoring this device.
[ 26.194] (II) This device may have been added with another device file.
[ 257.113] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 257.113] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 257.113] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 257.113] (**) NVIDIA(0): all display devices.)
[ 257.129] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 257.129] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 257.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 257.129] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 257.129] (**) NVIDIA(0): has been enabled on all display devices.)
[ 257.153] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 257.153] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 257.153] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 257.153] (**) NVIDIA(0): all display devices.)
[ 257.169] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 257.169] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 257.169] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 257.169] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 257.169] (**) NVIDIA(0): has been enabled on all display devices.)
[ 259.548] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 259.548] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 259.548] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 259.548] (**) NVIDIA(0): all display devices.)
[ 259.564] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 259.564] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 259.564] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 259.564] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 259.564] (**) NVIDIA(0): has been enabled on all display devices.)
[ 310.969] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 310.969] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 310.969] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 310.969] (**) NVIDIA(0): all display devices.)
[ 310.985] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 310.985] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 310.985] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 310.985] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 310.985] (**) NVIDIA(0): has been enabled on all display devices.)
[ 28041.177] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28041.230] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 28524.279] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 28524.279] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 28524.279] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 28524.279] (**) NVIDIA(0): all display devices.)
[ 28524.325] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 28524.325] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 28524.325] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 28524.325] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 28524.325] (**) NVIDIA(0): has been enabled on all display devices.)
[ 53843.174] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 53843.183] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 53843.183] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 53843.183] (**) NVIDIA(0): all display devices.)
[ 53843.240] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 53843.240] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 53843.240] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 53843.240] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 53843.240] (**) NVIDIA(0): has been enabled on all display devices.)
[ 71837.506] nvLock: client timed out, taking the lock
[ 71840.119] (II) Open ACPI successful (/var/run/acpid.socket)
[ 71840.287] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 87986.935] (II) Open ACPI successful (/var/run/acpid.socket)
[ 87987.067] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 90033.458] (II) Open ACPI successful (/var/run/acpid.socket)
[ 90033.510] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 93929.965] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 93929.965] (WW) NVIDIA(0): viewport height 480; adjusting
[ 93930.170] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75@1280x1024+640+0,CRT-0:640x480@640x480+0+0"
[ 93931.445] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93931.700] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93931.700] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 93931.700] (**) NVIDIA(0): all display devices.)
[ 93932.416] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93932.416] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93932.416] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93932.416] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93932.416] (**) NVIDIA(0): has been enabled on all display devices.)
[ 93932.459] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93932.459] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93932.459] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 93932.459] (**) NVIDIA(0): all display devices.)
[ 93932.476] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93932.476] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93932.476] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93932.476] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93932.476] (**) NVIDIA(0): has been enabled on all display devices.)
[ 93939.597] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 93939.722] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93939.722] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93939.722] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 93939.722] (**) NVIDIA(0): all display devices.)
[ 93939.740] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93939.740] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93939.740] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93939.740] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93939.740] (**) NVIDIA(0): has been enabled on all display devices.)
[ 93939.777] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93939.777] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93939.777] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 93939.777] (**) NVIDIA(0): all display devices.)
[ 93939.794] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93939.794] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93939.794] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93939.794] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93939.794] (**) NVIDIA(0): has been enabled on all display devices.)
[ 93939.925] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 93939.925] (WW) NVIDIA(0): viewport height 480; adjusting
[ 93939.925] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 93939.925] (WW) NVIDIA(0): viewport height 480; adjusting
[ 93948.333] (II) NVIDIA(0): Setting mode "CRT-0:640x480@640x480+0+0"
[ 93948.503] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93948.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93948.503] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 93948.503] (**) NVIDIA(0): all display devices.)
[ 93948.520] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93948.520] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93948.520] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93948.520] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93948.520] (**) NVIDIA(0): has been enabled on all display devices.)
[ 93948.620] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93948.620] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93948.620] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 93948.620] (**) NVIDIA(0): all display devices.)
[ 93948.636] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93948.636] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93948.636] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93948.636] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93948.636] (**) NVIDIA(0): has been enabled on all display devices.)
[ 93955.293] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 93955.356] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93955.356] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93955.356] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 93955.356] (**) NVIDIA(0): all display devices.)
[ 93955.372] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93955.372] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93955.372] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93955.372] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93955.372] (**) NVIDIA(0): has been enabled on all display devices.)
[ 93955.425] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 93955.426] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93955.426] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 93955.426] (**) NVIDIA(0): all display devices.)
[ 93955.442] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 93955.442] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93955.442] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 93955.442] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 93955.442] (**) NVIDIA(0): has been enabled on all display devices.)
[ 93955.952] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 93955.952] (WW) NVIDIA(0): viewport height 480; adjusting
[ 94051.745] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select@1280x1024+0+0"
[ 94051.833] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94051.833] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94051.833] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 94051.833] (**) NVIDIA(0): all display devices.)
[ 94051.849] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94051.849] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 94051.849] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94051.849] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94051.849] (**) NVIDIA(0): has been enabled on all display devices.)
[ 94052.033] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94052.033] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94052.033] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 94052.033] (**) NVIDIA(0): all display devices.)
[ 94052.049] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94052.049] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 94052.049] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94052.049] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94052.049] (**) NVIDIA(0): has been enabled on all display devices.)
[ 94057.372] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024_75+0+0"
[ 94057.475] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94057.475] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94057.475] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 94057.475] (**) NVIDIA(0): all display devices.)
[ 94057.491] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94057.491] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 94057.492] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94057.492] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94057.492] (**) NVIDIA(0): has been enabled on all display devices.)
[ 94057.528] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94057.528] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94057.528] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 94057.528] (**) NVIDIA(0): all display devices.)
[ 94057.544] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94057.544] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 94057.544] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94057.544] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94057.544] (**) NVIDIA(0): has been enabled on all display devices.)
[ 94057.666] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 94057.666] (WW) NVIDIA(0): viewport height 480; adjusting
[ 94085.872] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 94085.872] (WW) NVIDIA(0): viewport height 480; adjusting
[ 94085.992] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select@1280x1024+1280+0,CRT-1:1280x1024@1280x1024+0+0"
[ 94086.179] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94086.179] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94086.179] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 94086.180] (**) NVIDIA(0): all display devices.)
[ 94086.196] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94086.196] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 94086.196] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94086.196] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94086.196] (**) NVIDIA(0): has been enabled on all display devices.)
[ 94086.279] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 94086.279] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94086.279] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 94086.279] (**) NVIDIA(0): all display devices.)
[ 94086.295] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 94086.295] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 94086.295] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 94086.295] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 94086.295] (**) NVIDIA(0): has been enabled on all display devices.)
[ 94089.362] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 94089.362] (WW) NVIDIA(0): viewport height 480; adjusting
[ 94089.363] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 94089.363] (WW) NVIDIA(0): viewport height 480; adjusting
[ 95051.369] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 95051.369] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 95051.369] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 95051.369] (**) NVIDIA(0): all display devices.)
[ 95051.386] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 95051.386] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 95051.386] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 95051.386] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 95051.386] (**) NVIDIA(0): has been enabled on all display devices.)
[101910.284] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.284] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.284] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[101910.284] (**) NVIDIA(0): all display devices.)
[101910.303] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.303] (II) NVIDIA(GPU-0): 3D Vision stereo.
[101910.303] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.303] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.303] (**) NVIDIA(0): has been enabled on all display devices.)
[101910.333] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.333] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.333] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[101910.333] (**) NVIDIA(0): all display devices.)
[101910.351] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.351] (II) NVIDIA(GPU-0): 3D Vision stereo.
[101910.352] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.352] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.352] (**) NVIDIA(0): has been enabled on all display devices.)
[101910.384] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.384] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.384] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[101910.384] (**) NVIDIA(0): all display devices.)
[101910.400] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.400] (II) NVIDIA(GPU-0): 3D Vision stereo.
[101910.400] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.400] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.400] (**) NVIDIA(0): has been enabled on all display devices.)
[101910.751] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.751] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.751] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[101910.751] (**) NVIDIA(0): all display devices.)
[101910.767] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.767] (II) NVIDIA(GPU-0): 3D Vision stereo.
[101910.767] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.767] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.767] (**) NVIDIA(0): has been enabled on all display devices.)
[101910.818] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.818] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.818] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[101910.818] (**) NVIDIA(0): all display devices.)
[101910.834] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.834] (II) NVIDIA(GPU-0): 3D Vision stereo.
[101910.834] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.834] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.834] (**) NVIDIA(0): has been enabled on all display devices.)
[101910.934] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101910.934] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.934] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[101910.934] (**) NVIDIA(0): all display devices.)
[101910.950] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101910.950] (II) NVIDIA(GPU-0): 3D Vision stereo.
[101910.951] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101910.951] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101910.951] (**) NVIDIA(0): has been enabled on all display devices.)
[101911.285] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[101911.285] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101911.285] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[101911.285] (**) NVIDIA(0): all display devices.)
[101911.301] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[101911.301] (II) NVIDIA(GPU-0): 3D Vision stereo.
[101911.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[101911.301] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[101911.301] (**) NVIDIA(0): has been enabled on all display devices.)
[105780.869] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105780.869] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105780.869] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[105780.869] (**) NVIDIA(0): all display devices.)
[105780.887] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105780.887] (II) NVIDIA(GPU-0): 3D Vision stereo.
[105780.888] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105780.888] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105780.888] (**) NVIDIA(0): has been enabled on all display devices.)
[105780.935] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105780.935] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105780.935] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[105780.935] (**) NVIDIA(0): all display devices.)
[105780.951] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105780.951] (II) NVIDIA(GPU-0): 3D Vision stereo.
[105780.951] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105780.951] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105780.951] (**) NVIDIA(0): has been enabled on all display devices.)
[105781.003] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.003] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.003] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[105781.003] (**) NVIDIA(0): all display devices.)
[105781.020] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.020] (II) NVIDIA(GPU-0): 3D Vision stereo.
[105781.020] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.020] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.020] (**) NVIDIA(0): has been enabled on all display devices.)
[105781.102] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.102] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.102] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[105781.102] (**) NVIDIA(0): all display devices.)
[105781.118] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.118] (II) NVIDIA(GPU-0): 3D Vision stereo.
[105781.118] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.118] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.118] (**) NVIDIA(0): has been enabled on all display devices.)
[105781.168] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.168] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.168] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[105781.168] (**) NVIDIA(0): all display devices.)
[105781.185] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.185] (II) NVIDIA(GPU-0): 3D Vision stereo.
[105781.185] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.185] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.185] (**) NVIDIA(0): has been enabled on all display devices.)
[105781.219] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.219] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.219] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[105781.219] (**) NVIDIA(0): all display devices.)
[105781.235] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.235] (II) NVIDIA(GPU-0): 3D Vision stereo.
[105781.235] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.235] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.235] (**) NVIDIA(0): has been enabled on all display devices.)
[105781.435] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[105781.435] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.435] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[105781.435] (**) NVIDIA(0): all display devices.)
[105781.452] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[105781.452] (II) NVIDIA(GPU-0): 3D Vision stereo.
[105781.452] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[105781.452] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[105781.452] (**) NVIDIA(0): has been enabled on all display devices.)
[107254.244] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[107254.244] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[107254.244] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[107254.244] (**) NVIDIA(0): all display devices.)
[107254.260] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[107254.260] (II) NVIDIA(GPU-0): 3D Vision stereo.
[107254.260] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[107254.260] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[107254.260] (**) NVIDIA(0): has been enabled on all display devices.)
Kod: Zaznacz cały
[191231.257]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[191231.257] X Protocol Version 11, Revision 0
[191231.257] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[191231.257] Current Operating System: Linux Frankenstein-PC 3.2.0-4-686-pae #1 SMP Debian 3.2.46-1+deb7u1 i686
[191231.257] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=61a1e2b0-442c-4532-8e17-3d1dcdaa8c81 ro quiet
[191231.257] Build Date: 17 April 2013 11:13:16AM
[191231.257] xorg-server 2:1.12.4-6 (Julien Cristau <[email protected]>)
[191231.257] Current version of pixman: 0.26.0
[191231.257] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[191231.257] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[191231.257] (==) Log file: "/var/log/Xorg.1.log", Time: Mon Sep 16 21:14:45 2013
[191231.258] (==) Using config file: "/etc/X11/xorg.conf"
[191231.258] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[191231.258] (==) ServerLayout "Layout0"
[191231.258] (**) |-->Screen "Screen0" (0)
[191231.258] (**) | |-->Monitor "Monitor0"
[191231.258] (**) | |-->Device "Device0"
[191231.258] (**) |-->Input Device "Keyboard0"
[191231.258] (**) |-->Input Device "Mouse0"
[191231.258] (==) Automatically adding devices
[191231.258] (==) Automatically enabling devices
[191231.258] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[191231.258] Entry deleted from font path.
[191231.258] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[191231.258] Entry deleted from font path.
[191231.258] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[191231.258] (==) ModulePath set to "/usr/lib/xorg/modules"
[191231.258] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[191231.258] (WW) Disabling Keyboard0
[191231.258] (WW) Disabling Mouse0
[191231.258] (II) Loader magic: 0xb771a5a0
[191231.258] (II) Module ABI versions:
[191231.258] X.Org ANSI C Emulation: 0.4
[191231.258] X.Org Video Driver: 12.1
[191231.258] X.Org XInput driver : 16.0
[191231.258] X.Org Server Extension : 6.0
[191231.259] (--) PCI:*(0:1:0:0) 10de:0a65:1043:83f4 rev 162, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xdc000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/524288
[191231.259] (II) Open ACPI successful (/var/run/acpid.socket)
[191231.259] (II) LoadModule: "extmod"
[191231.260] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[191231.260] (II) Module extmod: vendor="X.Org Foundation"
[191231.260] compiled for 1.12.4, module version = 1.0.0
[191231.260] Module class: X.Org Server Extension
[191231.260] ABI class: X.Org Server Extension, version 6.0
[191231.260] (II) Loading extension SELinux
[191231.260] (II) Loading extension MIT-SCREEN-SAVER
[191231.260] (II) Loading extension XFree86-VidModeExtension
[191231.260] (II) Loading extension XFree86-DGA
[191231.260] (II) Loading extension DPMS
[191231.260] (II) Loading extension XVideo
[191231.260] (II) Loading extension XVideo-MotionCompensation
[191231.260] (II) Loading extension X-Resource
[191231.260] (II) LoadModule: "dbe"
[191231.260] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[191231.260] (II) Module dbe: vendor="X.Org Foundation"
[191231.260] compiled for 1.12.4, module version = 1.0.0
[191231.260] Module class: X.Org Server Extension
[191231.260] ABI class: X.Org Server Extension, version 6.0
[191231.260] (II) Loading extension DOUBLE-BUFFER
[191231.260] (II) LoadModule: "glx"
[191231.261] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[191231.292] (II) Module glx: vendor="NVIDIA Corporation"
[191231.292] compiled for 4.0.2, module version = 1.0.0
[191231.292] Module class: X.Org Server Extension
[191231.292] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:51:59 PDT 2013
[191231.292] (II) Loading extension GLX
[191231.292] (II) LoadModule: "record"
[191231.292] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[191231.292] (II) Module record: vendor="X.Org Foundation"
[191231.292] compiled for 1.12.4, module version = 1.13.0
[191231.292] Module class: X.Org Server Extension
[191231.292] ABI class: X.Org Server Extension, version 6.0
[191231.292] (II) Loading extension RECORD
[191231.292] (II) LoadModule: "dri"
[191231.292] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[191231.293] (II) Module dri: vendor="X.Org Foundation"
[191231.293] compiled for 1.12.4, module version = 1.0.0
[191231.293] ABI class: X.Org Server Extension, version 6.0
[191231.293] (II) Loading extension XFree86-DRI
[191231.293] (II) LoadModule: "dri2"
[191231.293] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[191231.293] (II) Module dri2: vendor="X.Org Foundation"
[191231.293] compiled for 1.12.4, module version = 1.2.0
[191231.293] ABI class: X.Org Server Extension, version 6.0
[191231.293] (II) Loading extension DRI2
[191231.293] (II) LoadModule: "nvidia"
[191231.293] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[191231.294] (II) Module nvidia: vendor="NVIDIA Corporation"
[191231.294] compiled for 4.0.2, module version = 1.0.0
[191231.294] Module class: X.Org Video Driver
[191231.294] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:32:42 PDT 2013
[191231.294] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[191231.294] (++) using VT number 7
[191231.299] (II) Loading sub module "fb"
[191231.299] (II) LoadModule: "fb"
[191231.299] (II) Loading /usr/lib/xorg/modules/libfb.so
[191231.299] (II) Module fb: vendor="X.Org Foundation"
[191231.299] compiled for 1.12.4, module version = 1.0.0
[191231.299] ABI class: X.Org ANSI C Emulation, version 0.4
[191231.299] (II) Loading sub module "wfb"
[191231.299] (II) LoadModule: "wfb"
[191231.299] (II) Loading /usr/lib/xorg/modules/libwfb.so
[191231.299] (II) Module wfb: vendor="X.Org Foundation"
[191231.299] compiled for 1.12.4, module version = 1.0.0
[191231.299] ABI class: X.Org ANSI C Emulation, version 0.4
[191231.299] (II) Loading sub module "ramdac"
[191231.299] (II) LoadModule: "ramdac"
[191231.299] (II) Module "ramdac" already built-in
[191231.300] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[191231.300] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[191231.300] (==) NVIDIA(0): RGB weight 888
[191231.300] (==) NVIDIA(0): Default visual is TrueColor
[191231.300] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[191231.300] (**) NVIDIA(0): Enabling 2D acceleration
[191231.671] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[191231.686] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[191231.686] (II) NVIDIA(GPU-0): 3D Vision stereo.
[191231.688] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[191231.688] (--) NVIDIA(0): Memory: 1048576 kBytes
[191231.688] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.06
[191231.688] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[191231.688] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[191231.689] (--) NVIDIA(0): Valid display device(s) on GeForce 210 at PCI:1:0:0
[191231.689] (--) NVIDIA(0): CRT-0 (connected)
[191231.689] (--) NVIDIA(0): Samsung SyncMaster (CRT-1) (connected)
[191231.689] (--) NVIDIA(0): DFP-0
[191231.689] (--) NVIDIA(0): DFP-1
[191231.689] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[191231.690] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[191231.690] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[191231.690] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[191231.690] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[191231.690] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[191231.690] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[191231.690] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[191231.690] (**) NVIDIA(0): all display devices.)
[191231.691] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[191231.691] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[191231.691] (**) NVIDIA(0): has been enabled on all display devices.)
[191231.694] (==) NVIDIA(0):
[191231.694] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[191231.694] (==) NVIDIA(0): will be used as the requested mode.
[191231.694] (==) NVIDIA(0):
[191231.695] (II) NVIDIA(0): Validated MetaModes:
[191231.695] (II) NVIDIA(0): "CRT-0:nvidia-auto-select,CRT-1:nvidia-auto-select"
[191231.695] (II) NVIDIA(0): Virtual screen size determined to be 1664 x 768
[191231.711] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[191231.711] (WW) NVIDIA(0): from CRT-0's EDID.
[191231.711] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[191231.711] (--) Depth 24 pixmap format is 32 bpp
[191231.712] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[191231.717] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select,CRT-1:nvidia-auto-select"
[191231.816] (II) Loading extension NV-GLX
[191231.950] (==) NVIDIA(0): Disabling shared memory pixmaps
[191231.950] (==) NVIDIA(0): Backing store disabled
[191231.950] (==) NVIDIA(0): Silken mouse enabled
[191231.950] (**) NVIDIA(0): DPMS enabled
[191231.950] (II) Loading extension NV-CONTROL
[191231.951] (II) Loading extension XINERAMA
[191231.951] (II) Loading sub module "dri2"
[191231.951] (II) LoadModule: "dri2"
[191231.951] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[191231.951] (II) Module dri2: vendor="X.Org Foundation"
[191231.951] compiled for 1.12.4, module version = 1.2.0
[191231.951] ABI class: X.Org Server Extension, version 6.0
[191231.951] (II) NVIDIA(0): [DRI2] Setup complete
[191231.951] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[191231.951] (--) RandR disabled
[191231.951] (II) Initializing built-in extension Generic Event Extension
[191231.951] (II) Initializing built-in extension SHAPE
[191231.951] (II) Initializing built-in extension MIT-SHM
[191231.951] (II) Initializing built-in extension XInputExtension
[191231.951] (II) Initializing built-in extension XTEST
[191231.951] (II) Initializing built-in extension BIG-REQUESTS
[191231.951] (II) Initializing built-in extension SYNC
[191231.951] (II) Initializing built-in extension XKEYBOARD
[191231.951] (II) Initializing built-in extension XC-MISC
[191231.951] (II) Initializing built-in extension SECURITY
[191231.951] (II) Initializing built-in extension XINERAMA
[191231.951] (II) Initializing built-in extension XFIXES
[191231.951] (II) Initializing built-in extension RENDER
[191231.951] (II) Initializing built-in extension RANDR
[191231.951] (II) Initializing built-in extension COMPOSITE
[191231.951] (II) Initializing built-in extension DAMAGE
[191231.951] (II) SELinux: Disabled on system
[191231.955] (II) Initializing extension GLX
[191232.036] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[191232.036] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[191232.036] (II) LoadModule: "evdev"
[191232.037] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[191232.037] (II) Module evdev: vendor="X.Org Foundation"
[191232.037] compiled for 1.12.1, module version = 2.7.0
[191232.037] Module class: X.Org XInput Driver
[191232.037] ABI class: X.Org XInput driver, version 16.0
[191232.037] (II) Using input driver 'evdev' for 'Power Button'
[191232.037] (**) Power Button: always reports core events
[191232.037] (**) evdev: Power Button: Device: "/dev/input/event5"
[191232.037] (--) evdev: Power Button: Vendor 0 Product 0x1
[191232.037] (--) evdev: Power Button: Found keys
[191232.037] (II) evdev: Power Button: Configuring as keyboard
[191232.037] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[191232.037] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[191232.037] (**) Option "xkb_rules" "evdev"
[191232.037] (**) Option "xkb_model" "evdev"
[191232.037] (**) Option "xkb_layout" "pl"
[191232.067] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[191232.067] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[191232.067] (II) Using input driver 'evdev' for 'Power Button'
[191232.067] (**) Power Button: always reports core events
[191232.067] (**) evdev: Power Button: Device: "/dev/input/event4"
[191232.067] (--) evdev: Power Button: Vendor 0 Product 0x1
[191232.067] (--) evdev: Power Button: Found keys
[191232.067] (II) evdev: Power Button: Configuring as keyboard
[191232.067] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[191232.067] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[191232.067] (**) Option "xkb_rules" "evdev"
[191232.067] (**) Option "xkb_model" "evdev"
[191232.067] (**) Option "xkb_layout" "pl"
[191232.068] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[191232.068] (II) No input driver specified, ignoring this device.
[191232.068] (II) This device may have been added with another device file.
[191232.068] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event7)
[191232.068] (II) No input driver specified, ignoring this device.
[191232.068] (II) This device may have been added with another device file.
[191232.069] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[191232.069] (II) No input driver specified, ignoring this device.
[191232.069] (II) This device may have been added with another device file.
[191232.069] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[191232.069] (II) No input driver specified, ignoring this device.
[191232.069] (II) This device may have been added with another device file.
[191232.070] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
[191232.070] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[191232.070] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[191232.070] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[191232.070] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
[191232.070] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[191232.070] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[191232.070] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[191232.070] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[191232.070] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[191232.070] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[191232.070] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[191232.070] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[191232.070] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[191232.070] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input0/event0"
[191232.070] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 8)
[191232.070] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[191232.070] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[191232.070] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[191232.070] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[191232.070] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[191232.071] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[191232.071] (II) No input driver specified, ignoring this device.
[191232.071] (II) This device may have been added with another device file.
[191232.071] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[191232.071] (II) No input driver specified, ignoring this device.
[191232.071] (II) This device may have been added with another device file.
[191232.072] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event1)
[191232.072] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[191232.072] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[191232.072] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[191232.072] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event1"
[191232.072] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[191232.072] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[191232.072] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[191232.072] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1/event1"
[191232.072] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 9)
[191232.072] (**) Option "xkb_rules" "evdev"
[191232.072] (**) Option "xkb_model" "evdev"
[191232.072] (**) Option "xkb_layout" "pl"
[191232.073] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[191232.073] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[191232.073] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[191232.073] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[191232.073] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event2"
[191232.073] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[191232.073] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found 1 mouse buttons
[191232.073] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found scroll wheel(s)
[191232.073] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found relative axes
[191232.073] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found x and y relative axes
[191232.073] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found absolute axes
[191232.073] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Forcing absolute x/y axes to exist.
[191232.073] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[191232.073] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as mouse
[191232.073] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[191232.073] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Adding scrollwheel support
[191232.073] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[191232.073] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[191232.073] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2/event2"
[191232.073] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 10)
[191232.073] (**) Option "xkb_rules" "evdev"
[191232.073] (**) Option "xkb_model" "evdev"
[191232.073] (**) Option "xkb_layout" "pl"
[191232.074] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: initialized for relative axes.
[191232.074] (WW) evdev: Plus More Enterprise LTD. USB-compliant keyboard: ignoring absolute axes.
[191232.074] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) keeping acceleration scheme 1
[191232.074] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration profile 0
[191232.074] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration factor: 2.000
[191232.074] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration threshold: 4
[191232.074] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/mouse1)
[191232.074] (II) No input driver specified, ignoring this device.
[191232.074] (II) This device may have been added with another device file.
[191232.075] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[191232.075] (II) No input driver specified, ignoring this device.
[191232.075] (II) This device may have been added with another device file.
[191233.859] (II) evdev: Power Button: Close
[191233.859] (II) UnloadModule: "evdev"
[191233.864] (II) evdev: Power Button: Close
[191233.864] (II) UnloadModule: "evdev"
[191233.880] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Close
[191233.880] (II) UnloadModule: "evdev"
[191233.890] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Close
[191233.890] (II) UnloadModule: "evdev"
[191233.892] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Close
[191233.892] (II) UnloadModule: "evdev"
[191234.204] Server terminated successfully (0). Closing log file.
Zapomniałem, skoro korzystasz ze sterowników zamkniętych, to wklej jeszcze:
Kod: Zaznacz cały
/etc/X11/xorg.confTo w oryginale po zmianach przez NVIDIA z gksu:
Edycja:
Maksymalna rozdzielczość dla LCD to
Przynajmniej tak wszędzie wykazują w specyfikacjach i to chciałbym osiągnąć (może za wiele).
Kod: Zaznacz cały
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 304.88 (buildd@murphy) Wed Apr 3 09:32:37 UTC 2013
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.48 (buildd@murphy) Wed Sep 12 11:32:28 UTC 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 210"
EndSection
Section "Screen"
# Removed Option "metamodes" "CRT-1: 1280x1024_75 +0+0; CRT-0: 320x240 +0+0; CRT-0: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-1"
Option "metamodes" "CRT-0: 640x480 +1280+0, CRT-1: 1280x1024_75 +0+0; CRT-0: 320x240 +0+0; CRT-0: nvidia-auto-select @1280x1024 +1280+0, CRT-1: 1280x1024 +0+0; CRT-0: nvidia-auto-select @640x360 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Edycja:
Maksymalna rozdzielczość dla LCD to
Kod: Zaznacz cały
[TABLE="width: 100%"]
[TR]
[TD="bgcolor: #8bb1d8, align: right"][font=Verdana, Arial, Helvetica, sans-serif][size=75][color=#ffffff][/color][/size][/font]
[/TD]
[TD="width: 85%, bgcolor: #ececec, align: center"][font=Verdana, Arial, Helvetica, sans-serif][size=75]1280 x 1024 @ 75Hz (Max)[/size][/font][/TD]
[/TR]
[/TABLE]Nie bardzo rozumiem co się dzieje w tym xorg.conf. Bo powinieneś mieć 2 sekcje monitor i 2 sekcje screen. Po jednej na każdy monitor, a tu jest jakaś opcja stereo.
Sprawdź czy istnieje katalog:
I czy są w nim pliki, jeżeli tak, to wklej ich nazwy i zawartości na forum.
Problem polega na tym, że system nie jest wstanie odczytać EDID z monitora (jest to informacja o możliwościach monitora). A skoro nie może odczytać to dla bezpieczeństwa ustawia bardzo niskie parametry.
Z logów wynika, że problem stanowi właśnie LCD.
Skoro pod windowsem działa to zrób tak:
Sprawdź czy istnieje katalog:
Kod: Zaznacz cały
/etc/X11/xorg.conf.dProblem polega na tym, że system nie jest wstanie odczytać EDID z monitora (jest to informacja o możliwościach monitora). A skoro nie może odczytać to dla bezpieczeństwa ustawia bardzo niskie parametry.
Z logów wynika, że problem stanowi właśnie LCD.
Skoro pod windowsem działa to zrób tak:
- Uruchom windowsa i ściągnij program Phoenix EDID Designer: http://www.komeil.com/download/2924
Program został napisany w czasach kiedy jeszcze nikt nie słyszał o windows 7, więc może być problem. W internecie są różne opinie, ale powinien zadziałać. - Uruchom program i wybierz menu Tools => Extract Registry EDID. Wybierz z listy monitor LCD i kliknij Extract EDID.
- Kliknij File => Export i wybierz format Raw 128 bytes. Zapisz plik pod dowolną nazwą, najlepiej bez spacji znaków specjalnych i tego typu wariactw.
- Teraz wróć na linuksa i skopiuj ten plik do:
Na końcu zmodyfikuj sekcje "Screen" w pliku xorg.conf dodając taki wpis:
Kod: Zaznacz cały
/etc/X11Kod: Zaznacz cały
Option "CustomEDID" "CRT-0:/etc/X11/nazwa.raw"
Na razie na szybko tylko listing z /etc/X11:
Zaraz przejdę na Windowsa i zobaczę co się uda zrobić. Mam nadzieję, że problemem nie będzie adapter D-SUB-DVI.
Edycja::
Zadziałało. Obecnie LCD ma rozdzielczość 1280x1024 ale w NVIDIA mam 2 monitory marki SAMSUNG SyncMaster 795df.
Mam nadzieję, że to nie wpłynie jakoś na działanie monitora LCD w szkodliwy sposób skoro taką rozdzielczość obsługuje.
Bardzo dziękuję Ci Rafale_F, za poświęcony czas i za pomoc i na przyszłość postaram się już nie zawracać nikomu z tym głowy a zrobię sobie instrukcję.
Kod: Zaznacz cały
root@Frankenstein-PC:/etc/X11# ls -lh
razem 84K
drwxr-xr-x 2 root root 4,0K lip 15 02:22 app-defaults
-rw-r--r-- 1 root root 18 lip 15 02:40 default-display-manager
drwxr-xr-x 6 root root 4,0K lip 14 23:37 fonts
-rw-r--r-- 1 root root 17K wrz 29 2009 rgb.txt
lrwxrwxrwx 1 root root 13 lip 14 23:39 X -> /usr/bin/Xorg
drwxr-xr-x 2 root root 4,0K lip 14 23:39 xinit
drwxr-xr-x 2 root root 4,0K gru 25 2012 xkb
-rw-r--r-- 1 root root 1,9K wrz 20 18:25 xorg.conf
-rw-r--r-- 1 root root 1,7K wrz 16 21:22 xorg.conf.backup
-rw-r--r-- 1 root root 0 wrz 10 21:30 xorg.conf.nvidia-xconfig-original
-rw-r--r-- 1 root root 1,5K wrz 11 00:38 xorg.conf.orgx
-rwxr-xr-x 1 root root 709 paź 13 2010 Xreset
drwxr-xr-x 2 root root 4,0K lip 14 23:38 Xreset.d
drwxr-xr-x 2 root root 4,0K lip 14 23:38 Xresources
-rwxr-xr-x 1 root root 3,5K kwi 8 2009 Xsession
drwxr-xr-x 2 root root 4,0K lip 15 02:21 Xsession.d
-rw-r--r-- 1 root root 265 sty 16 2009 Xsession.options
-rw-r--r-- 1 root root 13 maj 24 08:10 XvMCConfig
-rw-r--r-- 1 root root 601 lip 14 23:38 Xwrapper.config
Edycja::
Zadziałało. Obecnie LCD ma rozdzielczość 1280x1024 ale w NVIDIA mam 2 monitory marki SAMSUNG SyncMaster 795df.
Mam nadzieję, że to nie wpłynie jakoś na działanie monitora LCD w szkodliwy sposób skoro taką rozdzielczość obsługuje.
Bardzo dziękuję Ci Rafale_F, za poświęcony czas i za pomoc i na przyszłość postaram się już nie zawracać nikomu z tym głowy a zrobię sobie instrukcję.
Masz 2 monitory marki samsung bo źle wybrałeś EDID. Załadowałeś ten od SAMSUNGA, albo system przydziela te same nazwy w związku z pojedynczymi sekcjami screen i monitor. Rozdzielczość nie jest problemem, sprawdziłbym odświeżanie - ale nie wiem jak to za bardzo działa z DVI - bo monitory LCD nie potrzebują odświeżania.
A pokaż teraz log:
Edycja: możesz sprawdzić EDID instalując pakiet:
Następnie wykonując polecenie:
U mnie to wygląda tak:
A pokaż teraz log:
Kod: Zaznacz cały
/var/log/Xorg.0.logKod: Zaznacz cały
read-edidKod: Zaznacz cały
parse-edid < plik.rawKod: Zaznacz cały
parse-edid: parse-edid version 2.0.0
parse-edid: EDID checksum passed.
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
Identifier "LCD72VM"
VendorName "NEC"
ModelName "LCD72VM"
# Block type: 2:0 3:fd
HorizSync 31-81
VertRefresh 56-75
# Max dot clock (video bandwidth) 140 MHz
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
# DPMS capabilities: Active off:yes Suspend:yes Standby:yes
Mode "1280x1024" # vfreq 60.020Hz, hfreq 63.981kHz
DotClock 108.000000
HTimings 1280 1328 1440 1688
VTimings 1024 1025 1028 1066
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
EndSectionNiestety innego profilu nie miałem dostępnego.
parse-edid:
Na razie wszystko działa a lcd obsługuje tą rozdzielczość.
Kod: Zaznacz cały
[ 21.174]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 21.175] X Protocol Version 11, Revision 0
[ 21.175] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 21.175] Current Operating System: Linux Frankenstein-PC 3.2.0-4-686-pae #1 SMP Debian 3.2.46-1+deb7u1 i686
[ 21.175] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=61a1e2b0-442c-4532-8e17-3d1dcdaa8c81 ro quiet
[ 21.175] Build Date: 17 April 2013 11:13:16AM
[ 21.175] xorg-server 2:1.12.4-6 (Julien Cristau <[email protected]>)
[ 21.175] Current version of pixman: 0.26.0
[ 21.175] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.175] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.175] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 21 00:37:54 2013
[ 21.209] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.209] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.247] (==) ServerLayout "Layout0"
[ 21.247] (**) |-->Screen "Screen0" (0)
[ 21.247] (**) | |-->Monitor "Monitor0"
[ 21.248] (**) | |-->Device "Device0"
[ 21.248] (**) |-->Input Device "Keyboard0"
[ 21.248] (**) |-->Input Device "Mouse0"
[ 21.248] (**) Option "Xinerama" "0"
[ 21.248] (==) Automatically adding devices
[ 21.248] (==) Automatically enabling devices
[ 21.310] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 21.310] Entry deleted from font path.
[ 21.329] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 21.329] Entry deleted from font path.
[ 21.329] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 21.329] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.329] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 21.329] (WW) Disabling Keyboard0
[ 21.329] (WW) Disabling Mouse0
[ 21.329] (II) Loader magic: 0xb77de5a0
[ 21.329] (II) Module ABI versions:
[ 21.329] X.Org ANSI C Emulation: 0.4
[ 21.329] X.Org Video Driver: 12.1
[ 21.329] X.Org XInput driver : 16.0
[ 21.329] X.Org Server Extension : 6.0
[ 21.330] (--) PCI:*(0:1:0:0) 10de:0a65:1043:83f4 rev 162, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xdc000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/524288
[ 21.330] (II) Open ACPI successful (/var/run/acpid.socket)
[ 21.330] (II) LoadModule: "extmod"
[ 21.352] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 21.366] (II) Module extmod: vendor="X.Org Foundation"
[ 21.366] compiled for 1.12.4, module version = 1.0.0
[ 21.366] Module class: X.Org Server Extension
[ 21.366] ABI class: X.Org Server Extension, version 6.0
[ 21.366] (II) Loading extension SELinux
[ 21.366] (II) Loading extension MIT-SCREEN-SAVER
[ 21.366] (II) Loading extension XFree86-VidModeExtension
[ 21.366] (II) Loading extension XFree86-DGA
[ 21.366] (II) Loading extension DPMS
[ 21.366] (II) Loading extension XVideo
[ 21.366] (II) Loading extension XVideo-MotionCompensation
[ 21.366] (II) Loading extension X-Resource
[ 21.366] (II) LoadModule: "dbe"
[ 21.366] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 21.376] (II) Module dbe: vendor="X.Org Foundation"
[ 21.376] compiled for 1.12.4, module version = 1.0.0
[ 21.376] Module class: X.Org Server Extension
[ 21.376] ABI class: X.Org Server Extension, version 6.0
[ 21.376] (II) Loading extension DOUBLE-BUFFER
[ 21.376] (II) LoadModule: "glx"
[ 21.376] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 22.469] (II) Module glx: vendor="NVIDIA Corporation"
[ 22.469] compiled for 4.0.2, module version = 1.0.0
[ 22.469] Module class: X.Org Server Extension
[ 22.469] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:51:59 PDT 2013
[ 22.469] (II) Loading extension GLX
[ 22.469] (II) LoadModule: "record"
[ 22.469] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.478] (II) Module record: vendor="X.Org Foundation"
[ 22.478] compiled for 1.12.4, module version = 1.13.0
[ 22.478] Module class: X.Org Server Extension
[ 22.478] ABI class: X.Org Server Extension, version 6.0
[ 22.478] (II) Loading extension RECORD
[ 22.478] (II) LoadModule: "dri"
[ 22.478] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.489] (II) Module dri: vendor="X.Org Foundation"
[ 22.489] compiled for 1.12.4, module version = 1.0.0
[ 22.489] ABI class: X.Org Server Extension, version 6.0
[ 22.489] (II) Loading extension XFree86-DRI
[ 22.489] (II) LoadModule: "dri2"
[ 22.490] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.490] (II) Module dri2: vendor="X.Org Foundation"
[ 22.490] compiled for 1.12.4, module version = 1.2.0
[ 22.490] ABI class: X.Org Server Extension, version 6.0
[ 22.490] (II) Loading extension DRI2
[ 22.490] (II) LoadModule: "nvidia"
[ 22.525] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 22.636] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 22.636] compiled for 4.0.2, module version = 1.0.0
[ 22.636] Module class: X.Org Video Driver
[ 22.667] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:32:42 PDT 2013
[ 22.667] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 22.673] (++) using VT number 7
[ 22.678] (II) Loading sub module "fb"
[ 22.678] (II) LoadModule: "fb"
[ 22.678] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22.692] (II) Module fb: vendor="X.Org Foundation"
[ 22.692] compiled for 1.12.4, module version = 1.0.0
[ 22.692] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.692] (II) Loading sub module "wfb"
[ 22.692] (II) LoadModule: "wfb"
[ 22.692] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 22.699] (II) Module wfb: vendor="X.Org Foundation"
[ 22.699] compiled for 1.12.4, module version = 1.0.0
[ 22.699] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.699] (II) Loading sub module "ramdac"
[ 22.699] (II) LoadModule: "ramdac"
[ 22.699] (II) Module "ramdac" already built-in
[ 22.710] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 22.710] (==) NVIDIA(0): RGB weight 888
[ 22.710] (==) NVIDIA(0): Default visual is TrueColor
[ 22.710] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 22.710] (**) NVIDIA(0): Option "Stereo" "0"
[ 22.710] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[ 22.710] (**) NVIDIA(0): Stereo disabled by request
[ 22.715] (**) NVIDIA(0): Option "CustomEDID" "CRT-0:/etc/X11/LGFLATRONL1715S.raw"
[ 22.715] (**) NVIDIA(0): Option "MetaModes" "CRT-0: 1280x1024_75 +1280+0, CRT-1: 1280x1024_75 +0+0; CRT-0: nvidia-auto-select @1280x1024 +1280+0, CRT-1: 1280x1024 +0+0; CRT-0: nvidia-auto-select +0+0"
[ 22.715] (**) NVIDIA(0): Enabling 2D acceleration
[ 23.424] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 23.424] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 23.439] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 23.439] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 23.441] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[ 23.441] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 23.441] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.06
[ 23.441] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 23.441] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 23.443] (--) NVIDIA(0): Valid display device(s) on GeForce 210 at PCI:1:0:0
[ 23.443] (--) NVIDIA(0): Samsung SyncMaster (CRT-0) (connected)
[ 23.443] (--) NVIDIA(0): Samsung SyncMaster (CRT-1) (connected)
[ 23.443] (--) NVIDIA(0): DFP-0
[ 23.443] (--) NVIDIA(0): DFP-1
[ 23.443] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
[ 23.443] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 23.443] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 23.443] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 23.443] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 23.443] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 23.443] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 23.443] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 23.443] (**) NVIDIA(0): has been enabled on all display devices.)
[ 23.447] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 23.447] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 23.447] (**) NVIDIA(0): has been enabled on all display devices.)
[ 23.451] (II) NVIDIA(0): Validated MetaModes:
[ 23.451] (II) NVIDIA(0): "CRT-0:1280x1024_75+1280+0,CRT-1:1280x1024_75+0+0"
[ 23.451] (II) NVIDIA(0):
[ 23.451] (II) NVIDIA(0): "CRT-0:nvidia-auto-select@1280x1024+1280+0,CRT-1:1280x1024+0+0"
[ 23.451] (II) NVIDIA(0): "CRT-0:nvidia-auto-select+0+0"
[ 23.451] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
[ 23.474] (--) NVIDIA(0): DPI set to (104, 113); computed from "UseEdidDpi" X config
[ 23.474] (--) NVIDIA(0): option
[ 23.474] (--) Depth 24 pixmap format is 32 bpp
[ 23.474] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 23.488] (II) NVIDIA(0): Setting mode "CRT-0:1280x1024_75+1280+0,CRT-1:1280x1024_75+0+0"
[ 23.616] (II) Loading extension NV-GLX
[ 23.750] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 23.750] (==) NVIDIA(0): Backing store disabled
[ 23.750] (==) NVIDIA(0): Silken mouse enabled
[ 23.750] (**) NVIDIA(0): DPMS enabled
[ 23.750] (II) Loading extension NV-CONTROL
[ 23.750] (II) Loading extension XINERAMA
[ 23.750] (II) Loading sub module "dri2"
[ 23.750] (II) LoadModule: "dri2"
[ 23.751] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.751] (II) Module dri2: vendor="X.Org Foundation"
[ 23.751] compiled for 1.12.4, module version = 1.2.0
[ 23.751] ABI class: X.Org Server Extension, version 6.0
[ 23.751] (II) NVIDIA(0): [DRI2] Setup complete
[ 23.751] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 23.751] (--) RandR disabled
[ 23.751] (II) Initializing built-in extension Generic Event Extension
[ 23.751] (II) Initializing built-in extension SHAPE
[ 23.751] (II) Initializing built-in extension MIT-SHM
[ 23.751] (II) Initializing built-in extension XInputExtension
[ 23.751] (II) Initializing built-in extension XTEST
[ 23.751] (II) Initializing built-in extension BIG-REQUESTS
[ 23.751] (II) Initializing built-in extension SYNC
[ 23.751] (II) Initializing built-in extension XKEYBOARD
[ 23.751] (II) Initializing built-in extension XC-MISC
[ 23.751] (II) Initializing built-in extension SECURITY
[ 23.751] (II) Initializing built-in extension XINERAMA
[ 23.751] (II) Initializing built-in extension XFIXES
[ 23.751] (II) Initializing built-in extension RENDER
[ 23.751] (II) Initializing built-in extension RANDR
[ 23.751] (II) Initializing built-in extension COMPOSITE
[ 23.751] (II) Initializing built-in extension DAMAGE
[ 23.751] (II) SELinux: Disabled on system
[ 23.754] (II) Initializing extension GLX
[ 24.066] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 24.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.066] (II) LoadModule: "evdev"
[ 24.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.075] (II) Module evdev: vendor="X.Org Foundation"
[ 24.075] compiled for 1.12.1, module version = 2.7.0
[ 24.076] Module class: X.Org XInput Driver
[ 24.076] ABI class: X.Org XInput driver, version 16.0
[ 24.076] (II) Using input driver 'evdev' for 'Power Button'
[ 24.076] (**) Power Button: always reports core events
[ 24.076] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 24.076] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.076] (--) evdev: Power Button: Found keys
[ 24.076] (II) evdev: Power Button: Configuring as keyboard
[ 24.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 24.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.076] (**) Option "xkb_rules" "evdev"
[ 24.076] (**) Option "xkb_model" "evdev"
[ 24.076] (**) Option "xkb_layout" "pl"
[ 24.122] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 24.122] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.122] (II) Using input driver 'evdev' for 'Power Button'
[ 24.122] (**) Power Button: always reports core events
[ 24.122] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 24.122] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.122] (--) evdev: Power Button: Found keys
[ 24.122] (II) evdev: Power Button: Configuring as keyboard
[ 24.122] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[ 24.122] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 24.122] (**) Option "xkb_rules" "evdev"
[ 24.122] (**) Option "xkb_model" "evdev"
[ 24.122] (**) Option "xkb_layout" "pl"
[ 24.123] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[ 24.123] (II) No input driver specified, ignoring this device.
[ 24.123] (II) This device may have been added with another device file.
[ 24.123] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11)
[ 24.123] (II) No input driver specified, ignoring this device.
[ 24.123] (II) This device may have been added with another device file.
[ 24.123] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[ 24.123] (II) No input driver specified, ignoring this device.
[ 24.123] (II) This device may have been added with another device file.
[ 24.124] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event9)
[ 24.124] (II) No input driver specified, ignoring this device.
[ 24.124] (II) This device may have been added with another device file.
[ 24.124] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0)
[ 24.124] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 24.124] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 24.124] (**) USB OPTICAL MOUSE: always reports core events
[ 24.124] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event0"
[ 24.124] (--) evdev: USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4e
[ 24.124] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
[ 24.124] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 24.124] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 24.124] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 24.124] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 24.124] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 24.124] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 24.124] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input0/event0"
[ 24.124] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 8)
[ 24.125] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 24.125] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 24.125] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 24.125] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 24.125] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 24.125] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 24.125] (II) No input driver specified, ignoring this device.
[ 24.125] (II) This device may have been added with another device file.
[ 24.125] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event1)
[ 24.126] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 24.126] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 24.126] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 24.126] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event1"
[ 24.126] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 24.126] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 24.126] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 24.126] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 24.126] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 24.126] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 24.126] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 24.126] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 24.126] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/input/input1/event1"
[ 24.126] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 9)
[ 24.126] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 24.126] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 24.126] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 24.126] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 24.126] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 24.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse1)
[ 24.126] (II) No input driver specified, ignoring this device.
[ 24.126] (II) This device may have been added with another device file.
[ 24.127] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 24.127] (II) No input driver specified, ignoring this device.
[ 24.127] (II) This device may have been added with another device file.
[ 24.127] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[ 24.127] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.127] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[ 24.127] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[ 24.127] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event2"
[ 24.127] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[ 24.127] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[ 24.127] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[ 24.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input2/event2"
[ 24.127] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 10)
[ 24.127] (**) Option "xkb_rules" "evdev"
[ 24.127] (**) Option "xkb_model" "evdev"
[ 24.127] (**) Option "xkb_layout" "pl"
[ 24.128] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event3)
[ 24.128] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.128] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[ 24.128] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[ 24.128] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event3"
[ 24.128] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[ 24.128] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found 1 mouse buttons
[ 24.128] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found scroll wheel(s)
[ 24.128] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found relative axes
[ 24.128] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found x and y relative axes
[ 24.128] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found absolute axes
[ 24.128] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Forcing absolute x/y axes to exist.
[ 24.128] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[ 24.128] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as mouse
[ 24.128] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[ 24.128] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Adding scrollwheel support
[ 24.128] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[ 24.128] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.128] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input3/event3"
[ 24.128] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 11)
[ 24.128] (**) Option "xkb_rules" "evdev"
[ 24.128] (**) Option "xkb_model" "evdev"
[ 24.129] (**) Option "xkb_layout" "pl"
[ 24.129] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: initialized for relative axes.
[ 24.129] (WW) evdev: Plus More Enterprise LTD. USB-compliant keyboard: ignoring absolute axes.
[ 24.129] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) keeping acceleration scheme 1
[ 24.129] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration profile 0
[ 24.129] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration factor: 2.000
[ 24.129] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration threshold: 4
[ 24.129] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/mouse2)
[ 24.129] (II) No input driver specified, ignoring this device.
[ 24.129] (II) This device may have been added with another device file.
[ 24.130] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 24.130] (II) No input driver specified, ignoring this device.
[ 24.130] (II) This device may have been added with another device file.
[ 57.934] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 57.934] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 57.934] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 57.934] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 57.934] (**) NVIDIA(0): has been enabled on all display devices.)
[ 57.953] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 57.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 57.953] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 57.953] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 57.953] (**) NVIDIA(0): has been enabled on all display devices.)
[ 57.987] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 57.988] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 57.988] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 57.988] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 57.988] (**) NVIDIA(0): has been enabled on all display devices.)
[ 58.010] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 58.010] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 58.010] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 58.010] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 58.010] (**) NVIDIA(0): has been enabled on all display devices.)
[ 60.560] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 60.560] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 60.560] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 60.560] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 60.560] (**) NVIDIA(0): has been enabled on all display devices.)
[ 60.578] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 60.578] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 60.579] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 60.579] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 60.579] (**) NVIDIA(0): has been enabled on all display devices.)
[ 60.839] (II) NVIDIA(0): Setting mode "DVI-I-0: 640x480_60 @640x480 +1280+0, VGA-0: 1280x1024_75 @1280x1024 +0+0"
[ 61.007] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 61.007] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 61.007] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 61.007] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 61.007] (**) NVIDIA(0): has been enabled on all display devices.)
[ 61.026] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 61.026] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 61.026] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 61.026] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 61.027] (**) NVIDIA(0): has been enabled on all display devices.)
[ 61.140] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 61.140] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 61.140] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 61.140] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 61.140] (**) NVIDIA(0): has been enabled on all display devices.)
[ 61.161] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 61.161] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 61.161] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 61.161] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 61.161] (**) NVIDIA(0): has been enabled on all display devices.)
[ 61.207] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 61.207] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 61.207] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 61.207] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 61.207] (**) NVIDIA(0): has been enabled on all display devices.)
[ 61.226] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 61.226] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 61.226] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 61.226] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 61.226] (**) NVIDIA(0): has been enabled on all display devices.)
[ 61.258] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 61.258] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 61.258] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 61.258] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 61.258] (**) NVIDIA(0): has been enabled on all display devices.)
[ 61.277] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 61.277] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 61.277] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 61.277] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 61.277] (**) NVIDIA(0): has been enabled on all display devices.)
[ 108.969] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 108.969] (WW) NVIDIA(0): viewport height 768; adjusting
[ 109.267] (II) NVIDIA(0): Setting mode "CRT-0:1280x1024@1280x1024+1280+0,CRT-1:1280x1024_75@1280x1024+0+0"
[ 109.524] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 109.524] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 109.524] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 109.524] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 109.524] (**) NVIDIA(0): has been enabled on all display devices.)
[ 109.543] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 109.543] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 109.543] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 109.543] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 109.543] (**) NVIDIA(0): has been enabled on all display devices.)
[ 109.577] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 109.577] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 109.577] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 109.577] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 109.577] (**) NVIDIA(0): has been enabled on all display devices.)
[ 109.596] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 109.596] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 109.596] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 109.596] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 109.596] (**) NVIDIA(0): has been enabled on all display devices.)
[ 112.766] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 112.766] (WW) NVIDIA(0): viewport height 768; adjusting
[ 112.769] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 112.769] (WW) NVIDIA(0): viewport height 768; adjusting
[ 206.866] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 206.866] (WW) NVIDIA(0): viewport height 768; adjusting
[ 206.866] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 206.866] (WW) NVIDIA(0): viewport height 768; adjusting
[ 206.869] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 206.869] (WW) NVIDIA(0): viewport height 768; adjusting
[ 228.339] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 228.339] (WW) NVIDIA(0): viewport height 768; adjusting
[ 228.339] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 228.339] (WW) NVIDIA(0): viewport height 768; adjusting
[ 228.344] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 228.344] (WW) NVIDIA(0): viewport height 768; adjusting
[ 325.959] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 325.959] (WW) NVIDIA(0): viewport height 768; adjusting
[ 325.959] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 325.959] (WW) NVIDIA(0): viewport height 768; adjusting
[ 325.962] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 325.962] (WW) NVIDIA(0): viewport height 768; adjusting
[ 338.072] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 338.073] (WW) NVIDIA(0): viewport height 768; adjusting
[ 338.368] (II) NVIDIA(0): Setting mode "CRT-0:1280x1024@1280x1024+1280+0,CRT-1:1280x1024_75@1280x1024+0+0"
[ 342.749] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 342.749] (WW) NVIDIA(0): viewport height 768; adjusting
[ 342.753] (WW) NVIDIA(0): Specified panning domain height of 576 is smaller than
[ 342.753] (WW) NVIDIA(0): viewport height 768; adjusting
[ 16135.485] (II) Open ACPI successful (/var/run/acpid.socket)
[ 16135.609] (II) NVIDIA(0): Setting mode "CRT-0:1280x1024@1280x1024+1280+0,CRT-1:1280x1024_75@1280x1024+0+0"
[ 17994.403] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17994.403] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.403] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.403] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 17994.403] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.423] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 17994.423] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.423] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.423] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 17994.423] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.458] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17994.458] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.458] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.459] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 17994.459] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.477] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 17994.477] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.477] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.477] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 17994.477] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.510] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17994.511] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.511] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.511] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 17994.511] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.530] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 17994.530] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.530] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.530] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 17994.530] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.857] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17994.857] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.857] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.857] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 17994.857] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.876] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 17994.876] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.876] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.876] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 17994.876] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.910] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17994.910] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.910] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.910] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 17994.910] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17994.929] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 17994.929] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17994.929] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17994.929] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 17994.929] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17995.137] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17995.137] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17995.137] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17995.137] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 17995.137] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17995.158] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 17995.158] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17995.158] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17995.158] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 17995.158] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17995.257] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 17995.257] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17995.257] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17995.257] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 17995.257] (**) NVIDIA(0): has been enabled on all display devices.)
[ 17995.276] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 17995.276] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 17995.276] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17995.276] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 17995.276] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.176] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 18762.176] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.176] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.176] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 18762.176] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.195] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 18762.195] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.195] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.195] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 18762.195] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.230] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 18762.230] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.230] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.230] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 18762.230] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.249] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 18762.249] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.249] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.249] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 18762.249] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.283] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 18762.283] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.283] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.283] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 18762.283] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.302] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 18762.302] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.302] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.302] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 18762.302] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.442] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 18762.442] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.442] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.442] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 18762.442] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.461] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 18762.461] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.461] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.461] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 18762.461] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.509] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 18762.509] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.509] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.509] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 18762.509] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.528] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 18762.528] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.528] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.528] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 18762.528] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.563] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 18762.563] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.563] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.563] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 18762.563] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.582] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 18762.582] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.582] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.582] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 18762.582] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.791] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
[ 18762.791] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.791] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.791] (**) NVIDIA(0): device Samsung SyncMaster (CRT-0) (Using EDID frequencies
[ 18762.791] (**) NVIDIA(0): has been enabled on all display devices.)
[ 18762.810] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 18762.810] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 18762.810] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18762.810] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 18762.810] (**) NVIDIA(0): has been enabled on all display devices.)
parse-edid:
Kod: Zaznacz cały
parse-edid: parse-edid version 2.0.0
parse-edid: EDID checksum passed.
# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
Identifier "SyncMaster"
VendorName "SAM"
ModelName "SyncMaster"
# Block type: 2:0 3:fd
HorizSync 30-85
VertRefresh 50-160
# Max dot clock (video bandwidth) 180 MHz
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
# DPMS capabilities: Active off:yes Suspend:no Standby:no
Mode "1024x768" # vfreq 84.997Hz, hfreq 68.677kHz
DotClock 94.500000
HTimings 1024 1072 1168 1376
VTimings 768 769 772 808
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:fd
# Block type: 2:0 3:fc
# Block type: 2:0 3:ff
EndSection