Chesse nie widzi wbudowanej kamery interenetowej ProBook 4340s Debian Wheezy

chemiman · Post autor: **chemiman** » 12 listopada 2013, 22:40

Chesse i żaden inny program tego typu nie widzi wbudowanej w systemie kamery internetowej. Niedawno instalowałem jądro w wersji 3.10 z backportów przed tem ten problem też istniał. Generalnie w internecie jest mało informacji na ten temat więc ośmieliłem się zapytać czy da się to naprawić. Pozdrawiam.

Kod: Zaznacz cały

uname -a
Linux d130-195 3.10.0 #1 SMP Sun Nov 10 02:53:24 CET 2013 x86_64 GNU/Linux

dpkg --print-architecture
amd64

Kod: Zaznacz cały

lspci -k
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
    Subsystem: Hewlett-Packard Company Device 17f0
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f0
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
    Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
    Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
    Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: ahci
02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: sdhci-pci
02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30)
    Subsystem: Hewlett-Packard Company Device 17f0
02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: jmb38x_ms
03:00.0 Network controller: Ralink corp. Device 3290
    Subsystem: Hewlett-Packard Company Device 18ec
    Kernel driver in use: rt2800pci
03:00.1 Bluetooth: Ralink corp. Device 3298
    Subsystem: Hewlett-Packard Company Device 18ec
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)
    Subsystem: Hewlett-Packard Company Device 17f0
    Kernel driver in use: r8169

Kod: Zaznacz cały

lspci -n
00:00.0 0600: 8086:0154 (rev 09)
00:02.0 0300: 8086:0166 (rev 09)
00:14.0 0c03: 8086:1e31 (rev 04)
00:16.0 0780: 8086:1e3a (rev 04)
00:1a.0 0c03: 8086:1e2d (rev 04)
00:1b.0 0403: 8086:1e20 (rev 04)
00:1c.0 0604: 8086:1e10 (rev c4)
00:1c.2 0604: 8086:1e14 (rev c4)
00:1c.3 0604: 8086:1e16 (rev c4)
00:1c.5 0604: 8086:1e1a (rev c4)
00:1d.0 0c03: 8086:1e26 (rev 04)
00:1f.0 0601: 8086:1e59 (rev 04)
00:1f.2 0106: 8086:1e03 (rev 04)
02:00.0 0880: 197b:2392 (rev 30)
02:00.2 0805: 197b:2391 (rev 30)
02:00.3 0880: 197b:2393 (rev 30)
03:00.0 0280: 1814:3290
03:00.1 0d11: 1814:3298
04:00.0 0200: 10ec:8168 (rev 07)

Post autor: **Rafal_F** » 13 listopada 2013, 00:24

Kamera jest raczej pod USB, więc zacznij od:

Kod: Zaznacz cały

lsusb

chemiman · Post autor: **chemiman** » 13 listopada 2013, 00:59

Chodzi o wbudowaną kamerę.

Kod: Zaznacz cały

lsusb
Bus 001 Device 004: ID 0461:4d0f Primax Electronics, Ltd HP Optical Mouse
Bus 001 Device 005: ID 1058:1021 Western Digital Technologies, Inc. Elements 2TB
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0461:4e1d Primax Electronics, Ltd

Post autor: **Rafal_F** » 13 listopada 2013, 01:50

Wklej jeszcze wyniki

Kod: Zaznacz cały

dmesg

chemiman · Post autor: **chemiman** » 13 listopada 2013, 03:53

Załączniki poniżej:

chemiman · Post autor: **chemiman** » 13 listopada 2013, 03:54

Kod: Zaznacz cały


[10974.037746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[10974.037749] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[10974.037752] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10974.037754] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10974.037757] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[10974.037760] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11067.566554] cfg80211: Calling CRDA to update world regulatory domain
[11067.573217] cfg80211: World regulatory domain updated:
[11067.573222] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11067.573227] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11067.573230] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11067.573233] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11067.573236] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11067.573238] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11067.860205] wlan0: authenticate with 0c:27:24:69:70:40
[11067.874814] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[11067.876232] wlan0: authenticated
[11067.878659] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[11067.888894] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=157)
[11067.889017] wlan0: associated
[11067.889129] cfg80211: Calling CRDA for country: US
[11067.895921] cfg80211: Regulatory domain changed to country: US
[11067.895927] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11067.895932] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11067.895935] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11067.895938] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11067.895941] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11067.895943] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11067.895946] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11254.351685] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11374.821379] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11375.269915] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11518.053358] cfg80211: Calling CRDA to update world regulatory domain
[11518.057031] cfg80211: World regulatory domain updated:
[11518.057035] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11518.057037] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11518.057038] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11518.057039] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11518.057041] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11518.057042] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11518.282226] wlan0: authenticate with 0c:27:24:aa:c7:20
[11518.289292] wlan0: send auth to 0c:27:24:aa:c7:20 (try 1/3)
[11518.290238] wlan0: authenticated
[11518.293222] wlan0: associate with 0c:27:24:aa:c7:20 (try 1/3)
[11518.305888] wlan0: RX AssocResp from 0c:27:24:aa:c7:20 (capab=0x421 status=0 aid=170)
[11518.305993] wlan0: associated
[11518.306050] cfg80211: Calling CRDA for country: US
[11518.310149] cfg80211: Regulatory domain changed to country: US
[11518.310152] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11518.310154] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11518.310156] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11518.310157] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11518.310158] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11518.310160] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11518.310161] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11553.098576] cfg80211: Calling CRDA to update world regulatory domain
[11553.102212] cfg80211: World regulatory domain updated:
[11553.102216] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11553.102218] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11553.102220] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11553.102222] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11553.102223] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11553.102225] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11553.325844] wlan0: authenticate with 00:1d:e5:4c:57:60
[11553.341365] wlan0: send auth to 00:1d:e5:4c:57:60 (try 1/3)
[11553.343470] wlan0: authenticated
[11553.345262] wlan0: associate with 00:1d:e5:4c:57:60 (try 1/3)
[11553.363904] wlan0: RX AssocResp from 00:1d:e5:4c:57:60 (capab=0x421 status=0 aid=76)
[11553.364100] wlan0: associated
[11553.364153] cfg80211: Calling CRDA for country: US
[11553.370808] cfg80211: Regulatory domain changed to country: US
[11553.370811] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11553.370813] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11553.370815] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11553.370816] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11553.370818] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11553.370819] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11553.370820] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11558.118977] cfg80211: Calling CRDA to update world regulatory domain
[11558.122399] cfg80211: World regulatory domain updated:
[11558.122402] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11558.122404] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11558.122406] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11558.122407] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11558.122408] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11558.122410] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11558.285388] wlan0: authenticate with f4:1f:c2:bf:bd:e0
[11558.299000] wlan0: send auth to f4:1f:c2:bf:bd:e0 (try 1/3)
[11558.301203] wlan0: authenticated
[11558.303008] wlan0: associate with f4:1f:c2:bf:bd:e0 (try 1/3)
[11558.313603] wlan0: RX AssocResp from f4:1f:c2:bf:bd:e0 (capab=0x421 status=0 aid=151)
[11558.313705] wlan0: associated
[11558.313758] cfg80211: Calling CRDA for country: US
[11558.317294] cfg80211: Regulatory domain changed to country: US
[11558.317297] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11558.317299] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11558.317300] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11558.317302] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11558.317303] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11558.317304] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11558.317306] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11574.177202] cfg80211: Calling CRDA to update world regulatory domain
[11574.182668] cfg80211: World regulatory domain updated:
[11574.182671] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11574.182673] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11574.182675] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11574.182676] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11574.182677] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11574.182679] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11575.331163] wlan0: authenticate with f0:29:29:d6:48:50
[11575.346469] wlan0: send auth to f0:29:29:d6:48:50 (try 1/3)
[11575.369286] wlan0: authenticated
[11575.370424] wlan0: associate with f0:29:29:d6:48:50 (try 1/3)
[11575.378361] wlan0: RX AssocResp from f0:29:29:d6:48:50 (capab=0x421 status=0 aid=167)
[11575.378494] wlan0: associated
[11575.378561] cfg80211: Calling CRDA for country: US
[11575.382176] cfg80211: Regulatory domain changed to country: US
[11575.382179] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11575.382181] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11575.382183] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11575.382184] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11575.382186] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11575.382187] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11575.382189] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11665.381402] cfg80211: Calling CRDA to update world regulatory domain
[11665.610335] wlan0: authenticate with 0c:27:24:69:70:40
[11665.625695] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[11665.628168] wlan0: authenticated
[11665.629590] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[11665.639408] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=160)
[11665.639513] wlan0: associated
[11665.948652] cfg80211: World regulatory domain updated:
[11665.948660] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11665.948662] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11665.948663] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11665.948664] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11665.948666] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11665.948667] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11665.948962] cfg80211: Calling CRDA for country: US
[11665.952273] cfg80211: Regulatory domain changed to country: US
[11665.952276] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11665.952278] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11665.952279] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11665.952280] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11665.952282] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11665.952283] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11665.952284] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11791.485496] cfg80211: Calling CRDA to update world regulatory domain
[11791.563898] cfg80211: World regulatory domain updated:
[11791.563901] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11791.563903] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11791.563905] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11791.563906] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11791.563908] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11791.563909] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11791.715061] wlan0: authenticate with 0c:27:24:aa:c7:20
[11791.721674] wlan0: send auth to 0c:27:24:aa:c7:20 (try 1/3)
[11791.722678] wlan0: authenticated
[11791.725602] wlan0: associate with 0c:27:24:aa:c7:20 (try 1/3)
[11791.829784] wlan0: associate with 0c:27:24:aa:c7:20 (try 2/3)
[11791.853761] wlan0: RX AssocResp from 0c:27:24:aa:c7:20 (capab=0x421 status=0 aid=174)
[11791.853879] wlan0: associated
[11791.854480] cfg80211: Calling CRDA for country: US
[11791.861305] cfg80211: Regulatory domain changed to country: US
[11791.861308] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11791.861310] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11791.861312] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11791.861313] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11791.861315] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11791.861316] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11791.861317] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11814.499808] cfg80211: Calling CRDA to update world regulatory domain
[11814.506541] cfg80211: World regulatory domain updated:
[11814.506546] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11814.506551] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11814.506554] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11814.506557] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11814.506559] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11814.506562] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11814.664928] wlan0: authenticate with 00:1d:e5:4c:57:60
[11814.680000] wlan0: send auth to 00:1d:e5:4c:57:60 (try 1/3)
[11814.681666] wlan0: authenticated
[11814.683907] wlan0: associate with 00:1d:e5:4c:57:60 (try 1/3)
[11814.701001] wlan0: RX AssocResp from 00:1d:e5:4c:57:60 (capab=0x421 status=0 aid=94)
[11814.701310] wlan0: associated
[11814.701419] cfg80211: Calling CRDA for country: US
[11814.708227] cfg80211: Regulatory domain changed to country: US
[11814.708234] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11814.708238] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11814.708241] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11814.708244] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11814.708247] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11814.708250] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11814.708253] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11819.445649] cfg80211: Calling CRDA to update world regulatory domain
[11819.452507] cfg80211: World regulatory domain updated:
[11819.452515] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11819.452519] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11819.452522] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11819.452525] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11819.452528] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11819.452531] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11820.600247] wlan0: authenticate with f4:1f:c2:bf:bd:e0
[11820.614786] wlan0: send auth to f4:1f:c2:bf:bd:e0 (try 1/3)
[11820.641000] wlan0: authenticated
[11820.642715] wlan0: associate with f4:1f:c2:bf:bd:e0 (try 1/3)
[11820.664122] wlan0: RX AssocResp from f4:1f:c2:bf:bd:e0 (capab=0x421 status=0 aid=157)
[11820.664241] wlan0: associated
[11820.664352] cfg80211: Calling CRDA for country: US
[11820.671238] cfg80211: Regulatory domain changed to country: US
[11820.671244] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11820.671248] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11820.671251] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11820.671254] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11820.671257] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11820.671260] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11820.671262] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11822.501054] cfg80211: Calling CRDA to update world regulatory domain
[11822.507844] cfg80211: World regulatory domain updated:
[11822.507850] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11822.507854] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11822.507857] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11822.507860] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11822.507863] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11822.507866] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11822.630048] wlan0: authenticate with 0c:27:24:8f:24:10
[11822.637088] wlan0: direct probe to 0c:27:24:8f:24:10 (try 1/3)
[11822.841242] wlan0: direct probe to 0c:27:24:8f:24:10 (try 2/3)
[11823.045412] wlan0: direct probe to 0c:27:24:8f:24:10 (try 3/3)
[11823.249709] wlan0: authentication with 0c:27:24:8f:24:10 timed out
[11824.424280] wlan0: authenticate with f0:29:29:d6:48:50
[11824.439115] wlan0: send auth to f0:29:29:d6:48:50 (try 1/3)
[11824.442407] wlan0: authenticated
[11824.443133] wlan0: associate with f0:29:29:d6:48:50 (try 1/3)
[11824.455349] wlan0: RX AssocResp from f0:29:29:d6:48:50 (capab=0x421 status=0 aid=189)
[11824.455478] wlan0: associated
[11824.455581] cfg80211: Calling CRDA for country: US
[11824.464307] cfg80211: Regulatory domain changed to country: US
[11824.464315] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11824.464317] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11824.464318] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11824.464320] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11824.464321] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11824.464322] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11824.464324] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[11855.438414] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11857.743388] r8169 0000:04:00.0 eth0: link up
[11900.510021] cfg80211: Calling CRDA to update world regulatory domain
[11900.514301] cfg80211: World regulatory domain updated:
[11900.514306] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11900.514311] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11900.514314] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11900.514317] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[11900.514320] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11900.514323] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11900.739444] wlan0: authenticate with 0c:27:24:69:70:40
[11900.746336] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[11900.747365] wlan0: authenticated
[11900.750330] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[11900.758070] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=164)
[11900.758223] wlan0: associated
[11900.758347] cfg80211: Calling CRDA for country: US
[11900.764949] cfg80211: Regulatory domain changed to country: US
[11900.764956] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[11900.764960] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[11900.764963] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[11900.764966] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11900.764969] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11900.764971] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[11900.764974] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12138.790243] cfg80211: Calling CRDA to update world regulatory domain
[12138.793820] cfg80211: World regulatory domain updated:
[12138.793824] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12138.793826] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12138.793827] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12138.793829] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12138.793830] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12138.793831] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12139.020004] wlan0: authenticate with 0c:27:24:aa:c7:20
[12139.026873] wlan0: send auth to 0c:27:24:aa:c7:20 (try 1/3)
[12139.028851] wlan0: authenticated
[12139.030389] wlan0: associate with 0c:27:24:aa:c7:20 (try 1/3)
[12139.041961] wlan0: RX AssocResp from 0c:27:24:aa:c7:20 (capab=0x421 status=0 aid=177)
[12139.042068] wlan0: associated
[12139.042131] cfg80211: Calling CRDA for country: US
[12139.047400] cfg80211: Regulatory domain changed to country: US
[12139.047406] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12139.047410] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12139.047414] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12139.047417] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12139.047419] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12139.047432] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12139.047435] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12173.818400] cfg80211: Calling CRDA to update world regulatory domain
[12173.825144] cfg80211: World regulatory domain updated:
[12173.825150] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12173.825155] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12173.825158] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12173.825161] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12173.825164] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12173.825166] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12174.047831] wlan0: authenticate with f4:1f:c2:bf:bd:e0
[12174.062557] wlan0: send auth to f4:1f:c2:bf:bd:e0 (try 1/3)
[12174.101313] wlan0: authenticated
[12174.102494] wlan0: associate with f4:1f:c2:bf:bd:e0 (try 1/3)
[12174.116061] wlan0: RX AssocResp from f4:1f:c2:bf:bd:e0 (capab=0x421 status=0 aid=162)
[12174.116181] wlan0: associated
[12174.116290] cfg80211: Calling CRDA for country: US
[12174.123110] cfg80211: Regulatory domain changed to country: US
[12174.123117] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12174.123121] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12174.123124] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12174.123127] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12174.123130] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12174.123132] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12174.123135] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12201.874847] cfg80211: Calling CRDA to update world regulatory domain
[12201.882308] cfg80211: World regulatory domain updated:
[12201.882314] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12201.882318] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12201.882322] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12201.882324] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12201.882327] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12201.882330] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12202.038879] wlan0: authenticate with 00:1d:e5:4c:57:60
[12202.054503] wlan0: send auth to 00:1d:e5:4c:57:60 (try 1/3)
[12202.055716] wlan0: authenticated
[12202.058404] wlan0: associate with 00:1d:e5:4c:57:60 (try 1/3)
[12202.070286] wlan0: RX AssocResp from 00:1d:e5:4c:57:60 (capab=0x421 status=0 aid=125)
[12202.070606] wlan0: associated
[12202.070700] cfg80211: Calling CRDA for country: US
[12202.077488] cfg80211: Regulatory domain changed to country: US
[12202.077494] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12202.077500] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12202.077504] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12202.077507] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12202.077510] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12202.077513] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12202.077516] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12203.888934] cfg80211: Calling CRDA to update world regulatory domain
[12203.893954] cfg80211: World regulatory domain updated:
[12203.893958] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12203.893960] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12203.893962] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12203.893964] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12203.893965] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12203.893966] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12205.043273] wlan0: authenticate with f0:29:29:d6:48:50
[12205.057901] wlan0: send auth to f0:29:29:d6:48:50 (try 1/3)
[12205.060354] wlan0: authenticated
[12205.061828] wlan0: associate with f0:29:29:d6:48:50 (try 1/3)
[12205.083530] wlan0: RX AssocResp from f0:29:29:d6:48:50 (capab=0x421 status=0 aid=31)
[12205.083646] wlan0: associated
[12205.083698] cfg80211: Calling CRDA for country: US
[12205.087578] cfg80211: Regulatory domain changed to country: US
[12205.087581] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12205.087583] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12205.087584] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12205.087586] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12205.087587] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12205.087588] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12205.087590] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12259.952817] cfg80211: Calling CRDA to update world regulatory domain
[12259.959509] cfg80211: World regulatory domain updated:
[12259.959541] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12259.959546] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12259.959549] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12259.959552] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12259.959555] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12259.959557] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12260.182252] wlan0: authenticate with 0c:27:24:69:70:40
[12260.188922] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[12260.190817] wlan0: authenticated
[12260.192829] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[12260.206516] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=168)
[12260.206621] wlan0: associated
[12260.206688] cfg80211: Calling CRDA for country: US
[12260.210175] cfg80211: Regulatory domain changed to country: US
[12260.210178] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12260.210180] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12260.210182] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12260.210183] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12260.210185] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12260.210186] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12260.210187] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12449.145091] cfg80211: Calling CRDA to update world regulatory domain
[12449.148484] cfg80211: World regulatory domain updated:
[12449.148488] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12449.148490] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12449.148492] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12449.148493] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12449.148495] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12449.148496] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12449.310146] wlan0: authenticate with 0c:27:24:aa:c7:20
[12449.325044] wlan0: direct probe to 0c:27:24:aa:c7:20 (try 1/3)
[12449.529197] wlan0: direct probe to 0c:27:24:aa:c7:20 (try 2/3)
[12449.733433] wlan0: direct probe to 0c:27:24:aa:c7:20 (try 3/3)
[12449.937666] wlan0: authentication with 0c:27:24:aa:c7:20 timed out
[12450.099124] wlan0: authenticate with f4:1f:c2:bf:bd:e0
[12450.105899] wlan0: send auth to f4:1f:c2:bf:bd:e0 (try 1/3)
[12450.131593] wlan0: authenticated
[12450.133835] wlan0: associate with f4:1f:c2:bf:bd:e0 (try 1/3)
[12450.140082] wlan0: RX AssocResp from f4:1f:c2:bf:bd:e0 (capab=0x421 status=0 aid=169)
[12450.140215] wlan0: associated
[12450.140339] cfg80211: Calling CRDA for country: US
[12450.147011] cfg80211: Regulatory domain changed to country: US
[12450.147017] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12450.147021] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12450.147024] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12450.147027] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12450.147030] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12450.147032] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12450.147035] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12461.146647] cfg80211: Calling CRDA to update world regulatory domain
[12461.153354] cfg80211: World regulatory domain updated:
[12461.153360] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12461.153364] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12461.153367] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12461.153370] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12461.153373] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12461.153376] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12461.276189] wlan0: authenticate with 00:1b:2b:68:2e:b0
[12461.276252] wlan0: direct probe to 00:1b:2b:68:2e:b0 (try 1/3)
[12461.478836] wlan0: direct probe to 00:1b:2b:68:2e:b0 (try 2/3)
[12461.683085] wlan0: direct probe to 00:1b:2b:68:2e:b0 (try 3/3)
[12461.887269] wlan0: authentication with 00:1b:2b:68:2e:b0 timed out
[12462.065030] wlan0: authenticate with 0c:27:24:8f:24:10
[12462.071506] wlan0: direct probe to 0c:27:24:8f:24:10 (try 1/3)
[12462.275712] wlan0: direct probe to 0c:27:24:8f:24:10 (try 2/3)
[12462.479997] wlan0: direct probe to 0c:27:24:8f:24:10 (try 3/3)
[12462.684225] wlan0: authentication with 0c:27:24:8f:24:10 timed out
[12463.919043] wlan0: authenticate with 00:1d:e5:4c:57:60
[12463.933668] wlan0: direct probe to 00:1d:e5:4c:57:60 (try 1/3)
[12464.137877] wlan0: direct probe to 00:1d:e5:4c:57:60 (try 2/3)
[12464.342122] wlan0: direct probe to 00:1d:e5:4c:57:60 (try 3/3)
[12464.546266] wlan0: authentication with 00:1d:e5:4c:57:60 timed out
[12465.724468] wlan0: authenticate with f0:29:29:d6:48:50
[12465.739693] wlan0: send auth to f0:29:29:d6:48:50 (try 1/3)
[12465.741819] wlan0: authenticated
[12465.747631] wlan0: associate with f0:29:29:d6:48:50 (try 1/3)
[12465.755174] wlan0: RX AssocResp from f0:29:29:d6:48:50 (capab=0x421 status=0 aid=48)
[12465.755279] wlan0: associated
[12465.755328] cfg80211: Calling CRDA for country: US
[12465.758734] cfg80211: Regulatory domain changed to country: US
[12465.758737] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12465.758739] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12465.758741] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12465.758742] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12465.758743] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12465.758745] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12465.758746] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12669.392598] cfg80211: Calling CRDA to update world regulatory domain
[12669.399825] cfg80211: World regulatory domain updated:
[12669.399830] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12669.399834] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12669.399838] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12669.399840] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12669.399843] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12669.399846] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12669.621521] wlan0: authenticate with 0c:27:24:69:70:40
[12669.628671] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[12669.631313] wlan0: authenticated
[12669.632563] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[12669.640934] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=169)
[12669.641036] wlan0: associated
[12669.641083] cfg80211: Calling CRDA for country: US
[12669.647460] cfg80211: Regulatory domain changed to country: US
[12669.647466] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12669.647470] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12669.647474] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12669.647476] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12669.647479] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12669.647482] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12669.647485] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12759.559489] cfg80211: Calling CRDA to update world regulatory domain
[12759.566853] cfg80211: World regulatory domain updated:
[12759.566859] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12759.566863] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12759.566866] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12759.566869] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12759.566872] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12759.566875] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12759.688538] wlan0: authenticate with 0c:27:24:69:70:40
[12759.695603] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[12759.696978] wlan0: authenticated
[12759.699543] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[12759.713099] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=169)
[12759.713221] wlan0: associated
[12759.713336] cfg80211: Calling CRDA for country: US
[12759.720106] cfg80211: Regulatory domain changed to country: US
[12759.720112] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12759.720116] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12759.720120] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12759.720122] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12759.720125] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12759.720128] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12759.720131] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12816.456538] wlan0: authenticate with f0:29:29:d6:48:50
[12816.464410] wlan0: send auth to f0:29:29:d6:48:50 (try 1/3)
[12816.465122] cfg80211: Calling CRDA to update world regulatory domain
[12816.467651] wlan0: authenticated
[12816.471603] cfg80211: World regulatory domain updated:
[12816.471608] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12816.471613] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12816.471616] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12816.471620] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12816.471622] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12816.471625] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12816.476321] wlan0: associate with f0:29:29:d6:48:50 (try 1/3)
[12816.488968] wlan0: RX AssocResp from f0:29:29:d6:48:50 (capab=0x421 status=0 aid=66)
[12816.489119] wlan0: associated
[12816.489180] cfg80211: Calling CRDA for country: US
[12816.494887] cfg80211: Regulatory domain changed to country: US
[12816.494893] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12816.494898] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12816.494901] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12816.494904] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12816.494907] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12816.494909] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12816.494912] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[12880.637873] cfg80211: Calling CRDA to update world regulatory domain
[12880.644924] cfg80211: World regulatory domain updated:
[12880.644930] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12880.644934] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12880.644938] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12880.644941] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[12880.644943] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12880.644946] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12880.802338] wlan0: authenticate with 0c:27:24:69:70:40
[12880.817971] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[12880.822069] wlan0: authenticated
[12880.825845] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[12880.836999] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=169)
[12880.837131] wlan0: associated
[12880.837242] cfg80211: Calling CRDA for country: US
[12880.844718] cfg80211: Regulatory domain changed to country: US
[12880.844724] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[12880.844728] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[12880.844731] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[12880.844734] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12880.844737] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12880.844739] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[12880.844742] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[13020.797986] cfg80211: Calling CRDA to update world regulatory domain
[13020.804538] cfg80211: World regulatory domain updated:
[13020.804544] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13020.804549] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13020.804552] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13020.804555] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13020.804558] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13020.804560] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13020.927006] wlan0: authenticate with 0c:27:24:69:70:40
[13020.934084] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[13020.935207] wlan0: authenticated
[13020.937940] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[13020.951559] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=169)
[13020.951681] wlan0: associated
[13020.951796] cfg80211: Calling CRDA for country: US
[13020.958559] cfg80211: Regulatory domain changed to country: US
[13020.958565] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13020.958569] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[13020.958573] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[13020.958576] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13020.958578] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13020.958581] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13020.958584] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[13056.730947] wlan0: authenticate with f0:29:29:d6:48:50
[13056.738897] wlan0: send auth to f0:29:29:d6:48:50 (try 1/3)
[13056.739789] cfg80211: Calling CRDA to update world regulatory domain
[13056.741974] wlan0: authenticated
[13056.747393] cfg80211: World regulatory domain updated:
[13056.747398] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13056.747402] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13056.747406] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13056.747409] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[13056.747412] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13056.747415] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13056.750825] wlan0: associate with f0:29:29:d6:48:50 (try 1/3)
[13056.759301] wlan0: RX AssocResp from f0:29:29:d6:48:50 (capab=0x421 status=0 aid=82)
[13056.759486] wlan0: associated
[13056.759592] cfg80211: Calling CRDA for country: US
[13056.766034] cfg80211: Regulatory domain changed to country: US
[13056.766040] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[13056.766044] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[13056.766048] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[13056.766051] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13056.766053] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13056.766056] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[13056.766059] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[20093.119614] UDP: bad checksum. From 80.80.129.3:62557 to 128.223.131.100:53 ulen 49
[20144.917165] wlan0: authenticate with 0c:27:24:69:70:40
[20144.924713] wlan0: send auth to 0c:27:24:69:70:40 (try 1/3)
[20144.924964] cfg80211: Calling CRDA to update world regulatory domain
[20144.925930] wlan0: authenticated
[20144.928147] cfg80211: World regulatory domain updated:
[20144.928150] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[20144.928152] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20144.928153] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[20144.928155] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[20144.928156] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20144.928157] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20144.928702] wlan0: associate with 0c:27:24:69:70:40 (try 1/3)
[20144.938208] wlan0: RX AssocResp from 0c:27:24:69:70:40 (capab=0x421 status=0 aid=180)
[20144.938358] wlan0: associated
[20144.938414] cfg80211: Calling CRDA for country: US
[20144.941883] cfg80211: Regulatory domain changed to country: US
[20144.941888] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[20144.941890] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[20144.941891] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[20144.941892] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20144.941894] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20144.941895] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20144.941896] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[20265.066110] wlan0: authenticate with f0:29:29:d6:48:50
[20265.074045] wlan0: send auth to f0:29:29:d6:48:50 (try 1/3)
[20265.074301] cfg80211: Calling CRDA to update world regulatory domain
[20265.075456] wlan0: authenticated
[20265.077950] wlan0: associate with f0:29:29:d6:48:50 (try 1/3)
[20265.081248] cfg80211: World regulatory domain updated:
[20265.081253] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[20265.081257] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20265.081261] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[20265.081263] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[20265.081266] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20265.081269] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20265.098061] wlan0: RX AssocResp from f0:29:29:d6:48:50 (capab=0x421 status=0 aid=80)
[20265.098238] wlan0: associated
[20265.098346] cfg80211: Calling CRDA for country: US
[20265.105338] cfg80211: Regulatory domain changed to country: US
[20265.105344] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[20265.105348] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[20265.105351] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[20265.105354] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20265.105357] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20265.105360] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[20265.105362] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[24618.859603] usb 1-3: USB disconnect, device number 5
[24642.023485] wlan0: deauthenticating from f0:29:29:d6:48:50 by local choice (reason=3)
[24642.046577] cfg80211: Calling CRDA to update world regulatory domain
[24642.146760] cfg80211: World regulatory domain updated:
[24642.146767] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[24642.146772] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[24642.146775] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[24642.146778] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[24642.146781] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[24642.146783] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[24644.602014] usb 1-2: USB disconnect, device number 4
[24644.630775] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[24644.630779] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[24644.630786] PM: Marking nosave pages: [mem 0x40004000-0x40004fff]
[24644.630787] PM: Marking nosave pages: [mem 0xb8a9d000-0xb9ffefff]
[24644.630849] PM: Marking nosave pages: [mem 0xba000000-0xffffffff]
[24644.632122] PM: Basic memory bitmaps created
[24644.632123] PM: Syncing filesystems ... done.
[24645.719780] Freezing user space processes ... (elapsed 0.01 seconds) done.
[24645.734768] PM: Preallocating image memory... done (allocated 909990 pages)
[24667.909063] PM: Allocated 3639960 kbytes in 22.14 seconds (164.40 MB/s)
[24667.909066] Freezing remaining freezable tasks ... (elapsed 0.11 seconds) done.
[24668.020348] Suspending console(s) (use no_console_suspend to debug)
[24668.140234] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
[24668.444706] PM: freeze of devices complete after 423.863 msecs
[24668.444897] PM: late freeze of devices complete after 0.188 msecs
[24668.445703] PM: noirq freeze of devices complete after 0.804 msecs
[24668.446057] ACPI: Preparing to enter system sleep state S4
[24668.453508] PM: Saving platform NVS memory
[24668.454406] Disabling non-boot CPUs ...
[24668.556616] smpboot: CPU 1 is now offline
[24668.557068] PM: Creating hibernation image:
[24668.694812] PM: Need to copy 605160 pages
[24668.694814] PM: Normal pages needed: 605160 + 1024, available pages: 936412
[24668.557642] PM: Restoring platform NVS memory
[24668.558101] Enabling non-boot CPUs ...
[24668.558211] smpboot: Booting Node 0 Processor 1 APIC 0x2
[24668.571830] CPU1 is up
[24668.573177] ACPI: Waking up from system sleep state S4
[24669.766496] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[24669.811404] PM: noirq restore of devices complete after 54.207 msecs
[24669.811541] PM: early restore of devices complete after 0.109 msecs
[24669.984120] i915 0000:00:02.0: setting latency timer to 64
[24669.984323] xhci_hcd 0000:00:14.0: setting latency timer to 64
[24669.984339] usb usb1: root hub lost power or was reset
[24669.984341] usb usb2: root hub lost power or was reset
[24669.984492] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[24669.984562] ehci-pci 0000:00:1a.0: setting latency timer to 64
[24669.984575] usb usb3: root hub lost power or was reset
[24669.988462] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[24669.988664] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[24669.988773] ehci-pci 0000:00:1d.0: setting latency timer to 64
[24669.988790] usb usb4: root hub lost power or was reset
[24669.992679] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[24669.992693] ahci 0000:00:1f.2: setting latency timer to 64
[24670.243664] ------------[ cut here ]------------
[24670.243692] WARNING: at drivers/gpu/drm/i915/intel_display.c:1656 ironlake_crtc_disable+0x55c/0x775 [i915]()
[24670.243734] Modules linked in: fuse usb_storage hid_generic usbhid hid parport_pc ppdev lp parport bnep rfcomm bluetooth binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc loop snd_hda_codec_hdmi snd_hda_codec_idt coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 joydev arc4 ablk_helper cryptd rt2800pci rt2800lib rt2x00pci rt2x00mmio rt2x00lib mac80211 cfg80211 lrw crc_ccitt hp_wmi eeprom_93cx6 sparse_keymap gf128mul rfkill glue_helper snd_hda_intel i915 snd_hda_codec snd_hwdep snd_pcm drm_kms_helper drm hp_accel acpi_cpufreq ehci_pci i2c_algo_bit ehci_hcd jmb38x_ms lis3lv02d memstick iTCO_wdt i2c_core iTCO_vendor_support video snd_page_alloc mperf lpc_ich mfd_core processor snd_seq snd_timer snd_seq_device snd psmouse pcspkr microcode ac serio_raw evdev input_polldev battery wmi soundcore button ext4 crc16 jbd2 mbcache sg sr_mod sd_mod cdrom crc_t10dif thermal thermal_sys r8168(O) ahci libahci r8169 mii xhci_hcd sdhci_pci sdhci mmc_core usbcore usb_common libata scsi_mod
[24670.243757] CPU: 1 PID: 6235 Comm: kworker/u16:14 Tainted: G           O 3.10.0 #1
[24670.243758] Hardware name: Hewlett-Packard HP ProBook 4340s/17F0, BIOS 68IRR Ver. F.31 08/31/2012
[24670.243763] Workqueue: events_unbound async_run_entry_fn
[24670.243767]  ffffffff813676c7 0000000000000000 ffffffff8102f58d ffff8801b7d8c000
[24670.243769]  0000000000000000 0000000000000004 ffff8801b7d8e688 ffff8801b7d8c000
[24670.243772]  ffff8801b52a8000 00000000000e0300 ffffffffa037bbc4 ffff880100000000
[24670.243772] Call Trace:
[24670.243779]  [<ffffffff813676c7>] ? dump_stack+0xd/0x17
[24670.243783]  [<ffffffff8102f58d>] ? warn_slowpath_common+0x5f/0x77
[24670.243797]  [<ffffffffa037bbc4>] ? ironlake_crtc_disable+0x55c/0x775 [i915]
[24670.243810]  [<ffffffffa037d165>] ? __intel_set_mode+0x613/0xab6 [i915]
[24670.243825]  [<ffffffffa0384cbd>] ? intel_modeset_setup_hw_state+0x726/0x861 [i915]
[24670.243829]  [<ffffffff810536ce>] ? should_resched+0x5/0x23
[24670.243833]  [<ffffffff81368f03>] ? mutex_lock+0xd/0x2d
[24670.243841]  [<ffffffffa035b1b5>] ? __i915_drm_thaw+0x9e/0x187 [i915]
[24670.243845]  [<ffffffff811cf3e1>] ? pci_pm_default_resume+0x29/0x29
[24670.243853]  [<ffffffffa035b52a>] ? i915_resume+0x7d/0x9f [i915]
[24670.243857]  [<ffffffff811cf435>] ? pci_pm_restore+0x54/0x7b
[24670.243861]  [<ffffffff8126197b>] ? dpm_run_callback.isra.3+0x24/0x52
[24670.243863]  [<ffffffff812622f2>] ? device_resume+0xe0/0x109
[24670.243866]  [<ffffffff8126232f>] ? async_resume+0x14/0x38
[24670.243868]  [<ffffffff81050003>] ? async_run_entry_fn+0x55/0x10b
[24670.243871]  [<ffffffff81046668>] ? process_one_work+0x191/0x28f
[24670.243874]  [<ffffffff81046b15>] ? worker_thread+0x121/0x1e7
[24670.243876]  [<ffffffff810469f4>] ? rescuer_thread+0x269/0x269
[24670.243879]  [<ffffffff8104afbd>] ? kthread+0x81/0x89
[24670.243881]  [<ffffffff8104af3c>] ? __kthread_parkme+0x5d/0x5d
[24670.243885]  [<ffffffff8136fa2c>] ? ret_from_fork+0x7c/0xb0
[24670.243887]  [<ffffffff8104af3c>] ? __kthread_parkme+0x5d/0x5d
[24670.243889] ---[ end trace d6509e0c21e83f69 ]---
[24670.243892] ------------[ cut here ]------------
[24670.243904] WARNING: at drivers/gpu/drm/i915/intel_display.c:1091 assert_pch_pll+0xd5/0x1ca [i915]()
[24670.243906] PCH PLL state for reg c6014 assertion failure (expected off, current on), val=88046004
[24670.243940] Modules linked in: fuse usb_storage hid_generic usbhid hid parport_pc ppdev lp parport bnep rfcomm bluetooth binfmt_misc uinput nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc loop snd_hda_codec_hdmi snd_hda_codec_idt coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 joydev arc4 ablk_helper cryptd rt2800pci rt2800lib rt2x00pci rt2x00mmio rt2x00lib mac80211 cfg80211 lrw crc_ccitt hp_wmi eeprom_93cx6 sparse_keymap gf128mul rfkill glue_helper snd_hda_intel i915 snd_hda_codec snd_hwdep snd_pcm drm_kms_helper drm hp_accel acpi_cpufreq ehci_pci i2c_algo_bit ehci_hcd jmb38x_ms lis3lv02d memstick iTCO_wdt i2c_core iTCO_vendor_support video snd_page_alloc mperf lpc_ich mfd_core processor snd_seq snd_timer snd_seq_device snd psmouse pcspkr microcode ac serio_raw evdev input_polldev battery wmi soundcore button ext4 crc16 jbd2 mbcache sg sr_mod sd_mod cdrom crc_t10dif thermal thermal_sys r8168(O) ahci libahci r8169 mii xhci_hcd sdhci_pci sdhci mmc_core usbcore usb_common libata scsi_mod
[24670.243956] CPU: 1 PID: 6235 Comm: kworker/u16:14 Tainted: G        W  O 3.10.0 #1
[24670.243957] Hardware name: Hewlett-Packard HP ProBook 4340s/17F0, BIOS 68IRR Ver. F.31 08/31/2012
[24670.243959] Workqueue: events_unbound async_run_entry_fn
[24670.243962]  ffffffff813676c7 0000000000000000 ffffffff8102f58d ffff88007ae6bba0
[24670.243964]  ffff88007ae6baf8 ffffffffa03b8411 ffff8801b7d8e600 0000000088046004
[24670.243966]  ffff8801b7d8c000 ffff8801b7d8e688 ffffffff8102f63d ffffffffa03b851b
[24670.243967] Call Trace:
[24670.243970]  [<ffffffff813676c7>] ? dump_stack+0xd/0x17
[24670.243973]  [<ffffffff8102f58d>] ? warn_slowpath_common+0x5f/0x77
[24670.243977]  [<ffffffff8102f63d>] ? warn_slowpath_fmt+0x45/0x4a
[24670.243989]  [<ffffffffa037bbc4>] ? ironlake_crtc_disable+0x55c/0x775 [i915]
[24670.243997]  [<ffffffffa035bbde>] ? i915_read32+0xa8/0xb4 [i915]
[24670.244010]  [<ffffffffa0378035>] ? assert_pch_pll+0xd5/0x1ca [i915]
[24670.244021]  [<ffffffffa037bbda>] ? ironlake_crtc_disable+0x572/0x775 [i915]
[24670.244033]  [<ffffffffa037d165>] ? __intel_set_mode+0x613/0xab6 [i915]
[24670.244045]  [<ffffffffa0384cbd>] ? intel_modeset_setup_hw_state+0x726/0x861 [i915]
[24670.244049]  [<ffffffff810536ce>] ? should_resched+0x5/0x23
[24670.244053]  [<ffffffff81368f03>] ? mutex_lock+0xd/0x2d
[24670.244060]  [<ffffffffa035b1b5>] ? __i915_drm_thaw+0x9e/0x187 [i915]
[24670.244063]  [<ffffffff811cf3e1>] ? pci_pm_default_resume+0x29/0x29
[24670.244071]  [<ffffffffa035b52a>] ? i915_resume+0x7d/0x9f [i915]
[24670.244075]  [<ffffffff811cf435>] ? pci_pm_restore+0x54/0x7b
[24670.244078]  [<ffffffff8126197b>] ? dpm_run_callback.isra.3+0x24/0x52
[24670.244080]  [<ffffffff812622f2>] ? device_resume+0xe0/0x109
[24670.244083]  [<ffffffff8126232f>] ? async_resume+0x14/0x38
[24670.244085]  [<ffffffff81050003>] ? async_run_entry_fn+0x55/0x10b
[24670.244087]  [<ffffffff81046668>] ? process_one_work+0x191/0x28f
[24670.244090]  [<ffffffff81046b15>] ? worker_thread+0x121/0x1e7
[24670.244092]  [<ffffffff810469f4>] ? rescuer_thread+0x269/0x269
[24670.244094]  [<ffffffff8104afbd>] ? kthread+0x81/0x89
[24670.244097]  [<ffffffff8104af3c>] ? __kthread_parkme+0x5d/0x5d
[24670.244100]  [<ffffffff8136fa2c>] ? ret_from_fork+0x7c/0xb0
[24670.244102]  [<ffffffff8104af3c>] ? __kthread_parkme+0x5d/0x5d
[24670.244103] ---[ end trace d6509e0c21e83f6a ]---
[24670.315789] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[24670.315793] usb 4-1: reset high-speed USB device number 2 using ehci-pci
[24670.320904] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[24670.323753] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[24670.325233] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[24670.326811] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[24670.326825] ata2.00: configured for UDMA/100
[24670.326867] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[24670.327042] ata1.00: configured for UDMA/100
[24670.347889] sd 0:0:0:0: [sda] Starting disk
[24670.560066] usb 3-1: reset high-speed USB device number 2 using ehci-pci
[24670.972644] usb 3-1.3: reset high-speed USB device number 3 using ehci-pci
[24671.048904] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[24671.405318] PM: restore of devices complete after 1419.662 msecs
[24671.405661] PM: Image restored successfully.
[24671.405663] Restarting tasks ... done.
[24671.406906] PM: Basic memory bitmaps freed
[24671.407068] video LNXVIDEO:00: Restoring backlight state
[24707.477989] traps: gc-watchdog[3834] trap int3 ip:7fbdd27b9491 sp:7fbdaf0e3690 error:0
[24738.650143] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[24738.796058] r8169 0000:04:00.0 eth0: link down
[24738.796146] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[24742.430595] wlan0: authenticate with 5c:57:1a:08:d5:a0
[24742.446396] wlan0: send auth to 5c:57:1a:08:d5:a0 (try 1/3)
[24742.447380] wlan0: authenticated
[24742.450122] wlan0: associate with 5c:57:1a:08:d5:a0 (try 1/3)
[24742.458505] wlan0: RX AssocResp from 5c:57:1a:08:d5:a0 (capab=0xc11 status=0 aid=4)
[24742.458607] wlan0: associated
[24742.458636] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[24742.458688] cfg80211: Calling CRDA for country: US
[24743.559551] cfg80211: Regulatory domain changed to country: US
[24743.559556] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[24743.559560] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[24743.559562] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[24743.559565] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[24743.559567] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[24743.559569] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[24743.559571] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[24801.149190] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[24861.281869] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25041.760148] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25282.098708] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25390.330953] atkbd serio0: Unknown key pressed (translated set 2, code 0xa5 on isa0060/serio0).
[25390.330961] atkbd serio0: Use 'setkeycodes e025 <keycode>' to make it known.
[25391.536916] atkbd serio0: Unknown key pressed (translated set 2, code 0xa7 on isa0060/serio0).
[25391.536924] atkbd serio0: Use 'setkeycodes e027 <keycode>' to make it known.
[25402.572351] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25522.713567] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25643.183197] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25763.320490] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25882.112201] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25882.560627] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25883.073294] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25883.585798] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[25884.098485] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[26123.732170] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[26242.523941] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[26242.972685] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush

Post autor: **Rafal_F** » 13 listopada 2013, 04:28

Zrestartuj system i wykonaj to polecenie jeszcze raz zaraz po restarcie.

chemiman · Post autor: **chemiman** » 13 listopada 2013, 04:48

Kod: Zaznacz cały

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (root@d130-195) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Sun Nov 10 02:53:24 CET 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0 root=UUID=1de69196-ac6b-4f3f-820d-a5f35fc6a04a ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b8a9cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b8a9d000-0x00000000b9ebdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9ebe000-0x00000000b9fbdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b9fbe000-0x00000000b9ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba000000-0x00000000bf1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 4340s/17F0, BIOS 68IRR Ver. F.31 08/31/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x1bfe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 base 180000000 mask FC0000000 write-back
[    0.000000]   7 base 1BFE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0184d000, 0x0184dfff] PGTABLE
[    0.000000] BRK [0x0184e000, 0x0184efff] PGTABLE
[    0.000000] BRK [0x0184f000, 0x0184ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bfc00000-0x1bfdfffff]
[    0.000000]  [mem 0x1bfc00000-0x1bfdfffff] page 2M
[    0.000000] BRK [0x01850000, 0x01850fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfbfffff]
[    0.000000]  [mem 0x1bc000000-0x1bfbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[    0.000000]  [mem 0x180000000-0x1bbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01851000, 0x01851fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xb8a9cfff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xb89fffff] page 2M
[    0.000000]  [mem 0xb8a00000-0xb8a9cfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xb9fff000-0xb9ffffff]
[    0.000000]  [mem 0xb9fff000-0xb9ffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 2M
[    0.000000] RAMDISK: [mem 0x36946000-0x3749afff]
[    0.000000] ACPI: RSDP 00000000000f2f10 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 00000000b9ffe120 0008C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.000000] ACPI: FACP 00000000b9ffc000 0010C (v05 HPQOEM 17F0     0000000F HP   00000001)
[    0.000000] ACPI: DSDT 00000000b9fd5000 2116E (v02 HPQOEM 17F0     00000001 INTL 20110112)
[    0.000000] ACPI: FACS 00000000b9eb3000 00040
[    0.000000] ACPI: HPET 00000000b9ffb000 00038 (v01 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: APIC 00000000b9ffa000 000BC (v01 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 00000000b9ff9000 0003C (v01 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: ASF! 00000000b9ff8000 000A5 (v32 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 00000000b9fd2000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[    0.000000] ACPI: SSDT 00000000b9fd1000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[    0.000000] ACPI: SLIC 00000000b9fd0000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: MSDM 00000000b9fcf000 00055 (v03 HPQOEM SLIC-MPC 00000000 HP   00000001)
[    0.000000] ACPI: FPDT 00000000b9fce000 00044 (v01 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: BGRT 00000000b9fcd000 00038 (v00 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 00000000b9fcc000 00974 (v01  PmRef  Cpu0Ist 00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 00000000b9fcb000 00AAD (v01  PmRef    CpuPm 00003000 INTL 20110112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bfdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1bfdfffff]
[    0.000000]   NODE_DATA [mem 0x1bfdf6000-0x1bfdf9fff]
[    0.000000]  [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9400000-ffff8801be7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1bfdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xb8a9cfff]
[    0.000000]   node   0: [mem 0xb9fff000-0xb9ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x1bfdfffff]
[    0.000000] On node 0 totalpages: 1541689
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10279 pages used for memmap
[    0.000000]   DMA32 zone: 751773 pages, LIFO batch:31
[    0.000000]   Normal zone: 10745 pages used for memmap
[    0.000000]   Normal zone: 785920 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[    0.000000] PM: Registered nosave memory: 00000000b8a9d000 - 00000000b9ebe000
[    0.000000] PM: Registered nosave memory: 00000000b9ebe000 - 00000000b9fbe000
[    0.000000] PM: Registered nosave memory: 00000000b9fbe000 - 00000000b9fff000
[    0.000000] PM: Registered nosave memory: 00000000ba000000 - 00000000bf200000
[    0.000000] PM: Registered nosave memory: 00000000bf200000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[    0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[    0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801bfa00000 s80704 r8192 d21696 u262144
[    0.000000] pcpu-alloc: s80704 r8192 d21696 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1520588
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0 root=UUID=1de69196-ac6b-4f3f-820d-a5f35fc6a04a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5993324k/7337984k available (3532k kernel code, 1171228k absent, 173432k reserved, 3205k data, 872k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000]     Experimental no-CBs for all CPUs
[    0.000000]     Experimental no-CBs CPUs: 0-511.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2494.245 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.49 BogoMIPS (lpj=9976980)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000029] Security Framework initialized
[    0.000033] AppArmor: AppArmor disabled by boot time parameter
[    0.000472] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002427] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003292] Mount-cache hash table entries: 256
[    0.003451] Initializing cgroup subsys devices
[    0.003453] Initializing cgroup subsys freezer
[    0.003454] Initializing cgroup subsys net_cls
[    0.003455] Initializing cgroup subsys blkio
[    0.003457] Initializing cgroup subsys perf_event
[    0.003479] CPU: Physical Processor ID: 0
[    0.003480] CPU: Processor Core ID: 0
[    0.003485] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003485] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003843] mce: CPU supports 7 MCE banks
[    0.003853] CPU0: Thermal monitoring enabled (TM1)
[    0.003861] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.003861] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.003861] tlb_flushall_shift: 1
[    0.003950] Freeing SMP alternatives: 12k freed
[    0.003954] ACPI: Core revision 20130328
[    0.010167] ACPI: All ACPI Tables successfully acquired
[    0.062847] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.102575] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
[    0.102582] TSC deadline timer enabled
[    0.102591] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[    0.102597] ... version:                3
[    0.102598] ... bit width:              48
[    0.102599] ... generic registers:      8
[    0.102600] ... value mask:             0000ffffffffffff
[    0.102601] ... max period:             000000007fffffff
[    0.102602] ... fixed-purpose events:   3
[    0.102603] ... event mask:             00000007000000ff
[    0.102975] smpboot: Booting Node   0, Processors  #1
[    0.116351] Brought up 2 CPUs
[    0.116354] smpboot: Total of 2 processors activated (9976.98 BogoMIPS)
[    0.116443] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.117754] devtmpfs: initialized
[    0.120489] PM: Registering ACPI NVS region [mem 0xb9ebe000-0xb9fbdfff] (1048576 bytes)
[    0.120648] regulator-dummy: no parameters
[    0.120699] NET: Registered protocol family 16
[    0.120798] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.120800] ACPI: bus type PCI registered
[    0.120802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.120861] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.120863] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.133524] PCI: Using configuration type 1 for base access
[    0.134113] bio: create slab <bio-0> at 0
[    0.134204] ACPI: Added _OSI(Module Device)
[    0.134206] ACPI: Added _OSI(Processor Device)
[    0.134207] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.134209] ACPI: Added _OSI(Processor Aggregator Device)
[    0.135601] ACPI: EC: Look up EC in DSDT
[    0.137242] ACPI: Executed 1 blocks of module-level executable AML code
[    0.152453] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.189174] ACPI: SSDT 00000000b9eb1018 00861 (v01  PmRef  Cpu0Cst 00003001 INTL 20110112)
[    0.189534] ACPI: Dynamic OEM Table Load:
[    0.189536] ACPI: SSDT           (null) 00861 (v01  PmRef  Cpu0Cst 00003001 INTL 20110112)
[    0.196725] ACPI: SSDT 00000000b9eb2a98 00303 (v01  PmRef    ApIst 00003000 INTL 20110112)
[    0.197117] ACPI: Dynamic OEM Table Load:
[    0.197118] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20110112)
[    0.204589] ACPI: SSDT 00000000b9eb0d98 00119 (v01  PmRef    ApCst 00003000 INTL 20110112)
[    0.204939] ACPI: Dynamic OEM Table Load:
[    0.204941] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20110112)
[    1.516505] ACPI: Interpreter enabled
[    1.516513] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    1.516517] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    1.516530] ACPI: (supports S0 S3 S4 S5)
[    1.516531] ACPI: Using IOAPIC for interrupt routing
[    1.516553] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.516675] ACPI: No dock devices found.
[    1.517940] ACPI: Power Resource [APPR] (off)
[    1.530342] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.531503] PCI host bridge to bus 0000:00
[    1.531506] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.531508] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.531510] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.531512] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.531514] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff]
[    1.531516] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
[    1.531517] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[    1.531525] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    1.531605] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    1.531616] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[    1.531622] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.531627] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    1.531702] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    1.531724] pci 0000:00:14.0: reg 10: [mem 0xd0900000-0xd090ffff 64bit]
[    1.531795] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.531822] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.531860] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    1.531883] pci 0000:00:16.0: reg 10: [mem 0xd0914000-0xd091400f 64bit]
[    1.531959] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.532040] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    1.532062] pci 0000:00:1a.0: reg 10: [mem 0xd0919000-0xd09193ff]
[    1.532152] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.532178] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.532217] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    1.532234] pci 0000:00:1b.0: reg 10: [mem 0xd0910000-0xd0913fff 64bit]
[    1.532302] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.532355] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    1.532433] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.532499] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    1.532577] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.532615] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    1.532647] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    1.532725] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.532764] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.532798] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[    1.532875] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.532917] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    1.532955] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    1.532976] pci 0000:00:1d.0: reg 10: [mem 0xd0918000-0xd09183ff]
[    1.533065] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.533090] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.533124] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    1.533278] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    1.533296] pci 0000:00:1f.2: reg 10: [io  0x3068-0x306f]
[    1.533304] pci 0000:00:1f.2: reg 14: [io  0x3074-0x3077]
[    1.533313] pci 0000:00:1f.2: reg 18: [io  0x3060-0x3067]
[    1.533321] pci 0000:00:1f.2: reg 1c: [io  0x3070-0x3073]
[    1.533329] pci 0000:00:1f.2: reg 20: [io  0x3040-0x305f]
[    1.533337] pci 0000:00:1f.2: reg 24: [mem 0xd0917000-0xd09177ff]
[    1.533382] pci 0000:00:1f.2: PME# supported from D3hot
[    1.533491] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.533498] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    1.533630] pci 0000:02:00.0: [197b:2392] type 00 class 0x088000
[    1.533657] pci 0000:02:00.0: reg 10: [mem 0xd0703000-0xd07030ff]
[    1.533772] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    1.533943] pci 0000:02:00.2: [197b:2391] type 00 class 0x080501
[    1.533972] pci 0000:02:00.2: reg 10: [mem 0xd0702000-0xd07020ff]
[    1.534257] pci 0000:02:00.3: [197b:2393] type 00 class 0x088000
[    1.534284] pci 0000:02:00.3: reg 10: [mem 0xd0701000-0xd07010ff]
[    1.542606] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    1.542612] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    1.542710] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
[    1.542730] pci 0000:03:00.0: reg 10: [mem 0xd0610000-0xd061ffff]
[    1.542870] pci 0000:03:00.0: PME# supported from D0 D3hot
[    1.542900] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.542962] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
[    1.542981] pci 0000:03:00.1: reg 10: [mem 0xd0600000-0xd060ffff]
[    1.543121] pci 0000:03:00.1: supports D1
[    1.543122] pci 0000:03:00.1: PME# supported from D0 D1 D3hot
[    1.562623] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.562643] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.562732] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    1.562752] pci 0000:04:00.0: reg 10: [io  0x2000-0x20ff]
[    1.562786] pci 0000:04:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref]
[    1.562807] pci 0000:04:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref]
[    1.562899] pci 0000:04:00.0: supports D1 D2
[    1.562901] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.562939] pci 0000:04:00.0: System wakeup disabled by ACPI
[    1.574618] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    1.574626] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    1.574633] pci 0000:00:1c.5:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.574645] pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
[    1.575119] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    1.576333] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    1.576947] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.576996] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.577044] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.577091] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.577138] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.577184] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.577232] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.577278] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.577579] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.577586] acpi root: \_SB_.PCI0 notify handler is installed
[    1.577639] Found 1 acpi root devices
[    1.577673] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.577730] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.577733] vgaarb: loaded
[    1.577734] vgaarb: bridge control possible 0000:00:02.0
[    1.577769] PCI: Using ACPI for IRQ routing
[    1.584119] PCI: pci_cache_line_size set to 64 bytes
[    1.584181] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    1.584183] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    1.584184] e820: reserve RAM buffer [mem 0xb8a9d000-0xbbffffff]
[    1.584186] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[    1.584187] e820: reserve RAM buffer [mem 0x1bfe00000-0x1bfffffff]
[    1.584292] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.584297] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.587316] Switching to clocksource hpet
[    1.588529] pnp: PnP ACPI init
[    1.588538] ACPI: bus type PNP registered
[    1.588673] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.588676] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
[    1.588678] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.588680] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.588682] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    1.588684] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.588686] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.588688] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.588690] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.588693] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.588761] pnp 00:01: [dma 4]
[    1.588780] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.588806] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.588855] system 00:03: [io  0xfe00-0xfe0f] has been reserved
[    1.588857] system 00:03: [io  0xfe80-0xfe8f] has been reserved
[    1.588861] system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.588863] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.588962] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.588997] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.589034] system 00:06: [io  0x0200-0x027f] has been reserved
[    1.589036] system 00:06: [io  0x1000-0x100f] has been reserved
[    1.589038] system 00:06: [io  0xffff] has been reserved
[    1.589040] system 00:06: [io  0xffff] has been reserved
[    1.589042] system 00:06: [io  0x0400-0x047f] has been reserved
[    1.589044] system 00:06: [io  0x0500-0x057f] has been reserved
[    1.589046] system 00:06: [io  0xef80-0xef9f] has been reserved
[    1.589048] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.589074] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.589187] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    1.589215] pnp 00:09: Plug and Play ACPI device, IDs SYN0195 SYN0100 SYN0002 PNP0f13 (active)
[    1.589423] pnp 00:0a: Plug and Play ACPI device, IDs HPQ6000 (active)
[    1.589482] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[    1.589484] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
[    1.589486] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.589651] pnp: PnP ACPI: found 12 devices
[    1.589652] ACPI: bus type PNP unregistered
[    1.595755] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.595793] pci 0000:00:1c.2: BAR 15: assigned [mem 0xbf200000-0xbf2fffff pref]
[    1.595795] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.595801] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    1.595811] pci 0000:02:00.0: BAR 6: assigned [mem 0xbf200000-0xbf20ffff pref]
[    1.595813] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    1.595818] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    1.595823] pci 0000:00:1c.2:   bridge window [mem 0xbf200000-0xbf2fffff pref]
[    1.595829] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.595834] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.595843] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    1.595846] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    1.595851] pci 0000:00:1c.5:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.595856] pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
[    1.596325] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.596327] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.596328] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.596330] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff]
[    1.596332] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[    1.596333] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[    1.596335] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff]
[    1.596337] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff]
[    1.596339] pci_bus 0000:02: resource 2 [mem 0xbf200000-0xbf2fffff pref]
[    1.596340] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff]
[    1.596342] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    1.596344] pci_bus 0000:04: resource 1 [mem 0xd0500000-0xd05fffff]
[    1.596345] pci_bus 0000:04: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
[    1.596384] NET: Registered protocol family 2
[    1.596582] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.596757] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.596866] TCP: Hash tables configured (established 65536 bind 65536)
[    1.596884] TCP: reno registered
[    1.596894] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.596919] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.596997] NET: Registered protocol family 1
[    1.597008] pci 0000:00:02.0: Boot video device
[    1.597015] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    1.597135] pci 0000:00:14.0: can't derive routing for PCI INT A
[    1.597137] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
[    1.597283] pci 0000:00:14.0: can't derive routing for PCI INT A
[    1.597778] PCI: CLS 64 bytes, default 64
[    1.597816] Unpacking initramfs...
[    1.801614] Freeing initrd memory: 11604k freed
[    1.802850] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.802854] software IO TLB [mem 0xb4a9d000-0xb8a9d000] (64MB) mapped at [ffff8800b4a9d000-ffff8800b8a9cfff]
[    1.803134] audit: initializing netlink socket (disabled)
[    1.803143] type=2000 audit(1384317889.752:1): initialized
[    1.819089] bounce pool size: 64 pages
[    1.819093] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.819492] VFS: Disk quotas dquot_6.5.2
[    1.819511] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.819583] msgmni has been set to 11728
[    1.819779] alg: No test for stdrng (krng)
[    1.819800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.819802] io scheduler noop registered
[    1.819803] io scheduler deadline registered
[    1.819813] io scheduler cfq registered (default)
[    1.819894] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.819971] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[    1.820044] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    1.820117] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    1.820201] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.820206] pcie_pme 0000:00:1c.:p cie01: service driver pcie_pme loaded
[    1.820224] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.820226] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.820227] pci 0000:02:00.2: Signaling PME through PCIe PME interrupt
[    1.820229] pci 0000:02:00.3: Signaling PME through PCIe PME interrupt
[    1.820233] pcie_pme 0000:00:1c.2 :p cie01: service driver pcie_pme loaded
[    1.820251] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.820252] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.820254] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[    1.820258] pcie_pme 0000:00:1c.3 :p cie01: service driver pcie_pme loaded
[    1.820276] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    1.820277] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    1.820282] pcie_pme 0000:00:1c.5 :p cie01: service driver pcie_pme loaded
[    1.820293] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.820306] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.820357] intel_idle: MWAIT substates: 0x21120
[    1.820358] intel_idle: v0.4 model 0x3A
[    1.820359] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.820396] GHES: HEST is not enabled!
[    1.820436] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.820943] Linux agpgart interface v0.103
[    1.821032] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.822862] i8042: Detected active multiplexing controller, rev 1.1
[    1.823637] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.823642] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.823649] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.823651] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.823653] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.823775] mousedev: PS/2 mouse device common for all mice
[    1.823802] rtc_cmos 00:07: RTC can wake from S4
[    1.823919] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.823947] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.823995] cpuidle: using governor ladder
[    1.824047] cpuidle: using governor menu
[    1.824062] drop_monitor: Initializing network drop monitor service
[    1.824126] TCP: cubic registered
[    1.824160] NET: Registered protocol family 10
[    1.824322] mip6: Mobile IPv6
[    1.824324] NET: Registered protocol family 17
[    1.824332] Key type dns_resolver registered
[    1.824524] PM: Hibernation image not present or could not be loaded.
[    1.824531] registered taskstats version 1
[    1.825210] rtc_cmos 00:07: setting system clock to 2013-11-13 04:44:49 UTC (1384317889)
[    1.826136] Freeing unused kernel memory: 872k freed
[    1.826237] Write protecting the kernel read-only data: 6144k
[    1.827278] Freeing unused kernel memory: 556k freed
[    1.828345] Freeing unused kernel memory: 576k freed
[    1.838797] udevd[71]: starting version 175
[    1.849850] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.859807] ACPI: bus type USB registered
[    1.859982] usbcore: registered new interface driver usbfs
[    1.859996] usbcore: registered new interface driver hub
[    1.861845] SCSI subsystem initialized
[    1.862345] usbcore: registered new device driver usb
[    1.862617] ACPI: bus type ATA registered
[    1.863955] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.863958] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 10
[    1.863980] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.863984] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.863989] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.864081] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.864104] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    1.864157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.864159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.864161] usb usb1: Product: xHCI Host Controller
[    1.864162] usb usb1: Manufacturer: Linux 3.10.0 xhci_hcd
[    1.864164] usb usb1: SerialNumber: 0000:00:14.0
[    1.865036] xHCI xhci_add_endpoint called for root hub
[    1.865039] xHCI xhci_check_bandwidth called for root hub
[    1.865065] hub 1-0:1.0: USB hub found
[    1.865073] hub 1-0:1.0: 4 ports detected
[    1.865365] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.865369] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.865390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.865391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.865393] usb usb2: Product: xHCI Host Controller
[    1.865395] usb usb2: Manufacturer: Linux 3.10.0 xhci_hcd
[    1.865396] usb usb2: SerialNumber: 0000:00:14.0
[    1.866364] xHCI xhci_add_endpoint called for root hub
[    1.866366] xHCI xhci_check_bandwidth called for root hub
[    1.866391] hub 2-0:1.0: USB hub found
[    1.866399] hub 2-0:1.0: 4 ports detected
[    1.873165] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.873414] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[    1.873582] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c18000, b4:b5:2f:89:8e:5f, XID 0c900800 IRQ 45
[    1.873584] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.875983] sdhci: Secure Digital Host Controller Interface driver
[    1.875986] sdhci: Copyright(c) Pierre Ossman
[    1.876197] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2392] (rev 30)
[    1.876291] mmc0: no vqmmc regulator found
[    1.876292] mmc0: no vmmc regulator found
[    1.876363] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[    1.876377] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2391] (rev 30)
[    1.876417] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[    1.878455] libata version 3.00 loaded.
[    1.891917] ahci 0000:00:1f.2: version 3.0
[    1.892084] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    1.892113] ahci: SSS flag set, parallel bus scan disabled
[    1.892138] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.892141] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.892146] ahci 0000:00:1f.2: setting latency timer to 64
[    1.902947] scsi0 : ahci
[    1.904875] scsi1 : ahci
[    1.906086] scsi2 : ahci
[    1.906221] scsi3 : ahci
[    1.909610] scsi4 : ahci
[    1.909742] scsi5 : ahci
[    1.909813] ata1: SATA max UDMA/133 abar m2048@0xd0917000 port 0xd0917100 irq 46
[    1.909817] ata2: SATA max UDMA/133 abar m2048@0xd0917000 port 0xd0917180 irq 46
[    1.909818] ata3: DUMMY
[    1.909819] ata4: DUMMY
[    1.909821] ata5: DUMMY
[    1.909822] ata6: DUMMY
[    1.933635] thermal LNXTHERM:00: registered as thermal_zone0
[    1.933639] ACPI: Thermal Zone [CPUZ] (48 C)
[    1.957558] thermal LNXTHERM:01: registered as thermal_zone1
[    1.957560] ACPI: Thermal Zone [GFXZ] (0 C)
[    1.972427] thermal LNXTHERM:02: registered as thermal_zone2
[    1.972429] ACPI: Thermal Zone [EXTZ] (38 C)
[    1.987399] thermal LNXTHERM:03: registered as thermal_zone3
[    1.987402] ACPI: Thermal Zone [LOCZ] (37 C)
[    2.002320] thermal LNXTHERM:04: registered as thermal_zone4
[    2.002323] ACPI: Thermal Zone [BATZ] (31 C)
[    2.002629] thermal LNXTHERM:05: registered as thermal_zone5
[    2.002631] ACPI: Thermal Zone [PCHZ] (127 C)
[    2.002830] thermal LNXTHERM:06: registered as thermal_zone6
[    2.002831] ACPI: Thermal Zone [DM1Z] (0 C)
[    2.003008] thermal LNXTHERM:07: registered as thermal_zone7
[    2.003010] ACPI: Thermal Zone [DM2Z] (0 C)
[    2.228123] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.229487] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.229682] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA7A0, max UDMA/100
[    2.229689] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.231180] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.231373] ata1.00: configured for UDMA/100
[    2.236327] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    2.556495] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.560137] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.560158] ata2.00: ATAPI: hp       DVDRAM GT50N, MP01, max UDMA/100
[    2.563322] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.563343] ata2.00: configured for UDMA/100
[    2.572026] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT50N     MP01 PQ: 0 ANSI: 5
[    2.576504] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.576508] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.576556] sd 0:0:0:0: [sda] Write Protect is off
[    2.576558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.576585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.581111] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.581128] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.581211] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.582787] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.582895] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.643474]  sda: sda1 sda2 sda3 < sda5 > sda4
[    2.644202] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.800747] tsc: Refined TSC clocksource calibration: 2494.334 MHz
[    2.800756] Switching to clocksource tsc
[    3.135859] PM: Starting manual resume from disk
[    3.135863] PM: Hibernation image partition 8:5 present
[    3.135864] PM: Looking for hibernation image.
[    3.155284] PM: Image not found (code -22)
[    3.155286] PM: Hibernation image not present or could not be loaded.
[    3.208865] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    5.174919] udevd[392]: starting version 175
[    6.011015] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    6.011021] ACPI: Sleep Button [SLPB]
[    6.011066] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    6.011103] ACPI: Lid Switch [LID]
[    6.011143] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.011146] ACPI: Power Button [PWRF]
[    6.017127] wmi: Mapper loaded
[    6.176654] ACPI: Battery Slot [BAT0] (battery present)
[    6.216477] ACPI: Requesting acpi_cpufreq
[    6.250167] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[    6.250174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.250178] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    6.250181] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.250182] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    6.250185] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.250186] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.253603] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.285092] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[    6.349408] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.381035] ACPI: AC Adapter [AC] (off-line)
[    6.393298] iTCO_vendor_support: vendor-support=0
[    6.403811] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    6.403839] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    6.403926] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.426663] hp_accel: laptop model unknown, using default axes configuration
[    6.544745] lis3lv02d: 8 bits 3DC sensor found
[    6.576312] ehci-pci: EHCI PCI platform driver
[    6.576467] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    6.576477] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    6.576483] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    6.576497] ehci-pci 0000:00:1a.0: debug port 2
[    6.580410] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    6.580433] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd0919000
[    6.589082] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    6.589137] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    6.589140] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.589142] usb usb3: Product: EHCI Host Controller
[    6.589144] usb usb3: Manufacturer: Linux 3.10.0 ehci_hcd
[    6.589146] usb usb3: SerialNumber: 0000:00:1a.0
[    6.589334] hub 3-0:1.0: USB hub found
[    6.589340] hub 3-0:1.0: 2 ports detected
[    6.589611] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    6.589619] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    6.589624] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    6.589638] ehci-pci 0000:00:1d.0: debug port 2
[    6.593547] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    6.593553] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd0918000
[    6.605081] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    6.605113] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    6.605135] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.605149] usb usb4: Product: EHCI Host Controller
[    6.605150] usb usb4: Manufacturer: Linux 3.10.0 ehci_hcd
[    6.605152] usb usb4: SerialNumber: 0000:00:1d.0
[    6.605354] hub 4-0:1.0: USB hub found
[    6.605359] hub 4-0:1.0: 2 ports detected
[    6.627612] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[    6.629266] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    6.678532] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    6.724164] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    6.768053] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    6.768129] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    6.768183] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    6.837656] cfg80211: Calling CRDA to update world regulatory domain
[    6.901448] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    6.998232] [drm] Initialized drm 1.1.0 20060810
[    7.009581] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    7.033875] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    7.033893] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.034171] hub 3-1:1.0: USB hub found
[    7.034238] hub 3-1:1.0: 6 ports detected
[    7.254180] input: HP WMI hotkeys as /devices/virtual/input/input9
[    7.254546] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[    7.255864] [drm] Memory usable by graphics device = 2048M
[    7.255869] i915 0000:00:02.0: setting latency timer to 64
[    7.256529] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[    7.270508] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[    7.270517] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.270518] [drm] Driver supports precise vblank timestamp query.
[    7.419906] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.544665] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00473/0x640000/0xa2400, board id: 1398, fw id: 958908
[    7.591741] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[    7.734869] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem :o wns=io+mem
[    7.772142] fbcon: inteldrmfb (fb0) is primary device
[    7.846523] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    7.979076] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    7.979080] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.979373] hub 4-1:1.0: USB hub found
[    7.979471] hub 4-1:1.0: 6 ports detected
[    8.002497] cfg80211: World regulatory domain updated:
[    8.002497] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.002499] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.002499] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.002500] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.002501] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.002502] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.050962] usb 3-1.3: new high-speed USB device number 3 using ehci-pci
[    8.191825] usb 3-1.3: New USB device found, idVendor=0461, idProduct=4e1d
[    8.191827] usb 3-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    8.191829] usb 3-1.3: Product: HP HD Webcam [Fixed]
[    8.191831] usb 3-1.3: Manufacturer: Primax Electronics Ltd.
[    8.191832] usb 3-1.3: SerialNumber: PMX02
[    8.435399] Console: switching to colour frame buffer device 170x48
[    8.439515] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.439516] i915 0000:00:02.0: registered panic notifier
[    8.727669] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11
[    8.801586] acpi device:04: registered as cooling_device2
[    8.801947] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.802017] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    8.802097] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.876115] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   10.605866] Adding 6164476k swap on /dev/sda5.  Priority:-1 extents:1 across:6164476k 
[   10.628153] EXT4-fs (sda4): re-mounted. Opts: (null)
[   10.918864] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[   11.073177] loop: module loaded
[   12.662325] RPC: Registered named UNIX socket transport module.
[   12.662328] RPC: Registered udp transport module.
[   12.662329] RPC: Registered tcp transport module.
[   12.662330] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.691803] FS-Cache: Loaded
[   12.718512] FS-Cache: Netfs 'nfs' registered for caching
[   12.823715] Installing knfsd (copyright (C) 1996 [email protected]).
[   15.196326] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[   16.433654] Bluetooth: Core ver 2.16
[   16.433667] NET: Registered protocol family 31
[   16.433669] Bluetooth: HCI device and connection manager initialized
[   16.433676] Bluetooth: HCI socket layer initialized
[   16.433678] Bluetooth: L2CAP socket layer initialized
[   16.433682] Bluetooth: SCO socket layer initialized
[   16.475191] Bluetooth: RFCOMM TTY layer initialized
[   16.475204] Bluetooth: RFCOMM socket layer initialized
[   16.475205] Bluetooth: RFCOMM ver 1.11
[   16.663250] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.663254] Bluetooth: BNEP filters: protocol multicast
[   16.663263] Bluetooth: BNEP socket layer initialized
[   18.395306] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   18.420628] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   18.466955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.701001] r8169 0000:04:00.0 eth0: link down
[   18.701045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.000818] lp: driver loaded but no devices found
[   19.140581] ppdev: user-space parallel port driver
[   41.213302] wlan0: authenticate with 5c:57:1a:08:d5:a0
[   41.228762] wlan0: send auth to 5c:57:1a:08:d5:a0 (try 1/3)
[   41.229813] wlan0: authenticated
[   41.232639] wlan0: associate with 5c:57:1a:08:d5:a0 (try 1/3)
[   41.239679] wlan0: RX AssocResp from 5c:57:1a:08:d5:a0 (capab=0xc11 status=0 aid=4)
[   41.239780] wlan0: associated
[   41.239803] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.239848] cfg80211: Calling CRDA for country: US
[   41.243187] cfg80211: Regulatory domain changed to country: US
[   41.243190] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   41.243192] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.243194] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   41.243195] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   41.243197] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   41.243198] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   41.243199] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   69.625153] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush

Post autor: **Rafal_F** » 13 listopada 2013, 14:53

Dostarcz jeszcze plik

Kod: Zaznacz cały

/var/log/syslog

Generalnie z tego co widzę HP do każdego laptopa daje inną kamerkę (inny typ, inny producent itp). Straszny w tym bałagan. W twoim modelu znajduję się moduł wyprodukowany przez Primax Electronics, Ltd i to wszystko co mogę o tym powiedzieć. Kamera przedstawia się w ten sposób:

Kod: Zaznacz cały

Bus 003 Device 003: ID [B]0461:4e1d[/B] Primax Electronics, Ltd

Kod: Zaznacz cały

[    8.050962] usb 3-1.3: new high-speed USB device number 3 using ehci-pci
[    8.191825] usb 3-1.3: New USB device found, idVendor=[B]0461[/B], idProduct=[B]4e1d[/B]
[    8.191827] usb 3-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    8.191829] usb 3-1.3: Product: HP HD Webcam [Fixed]
[    8.191831] usb 3-1.3: Manufacturer: Primax Electronics Ltd.
[    8.191832] usb 3-1.3: SerialNumber: PMX02

Jak widać na powyższym nie włącza się żaden system odpowiedzialny za obsługę kamery. W internecie znalazłem zgłoszenie problemów z kartą sieciową w którym jest dołączony log /var/log/syslog: http://lists.debian.org/debian-devel/20 ... 00961.html a tam znajduje się taki wpis:

Kod: Zaznacz cały

Oct 29 02:12:40 jupiter kernel: [   11.091698] Linux video capture interface: v2.00
Oct 29 02:12:40 jupiter kernel: [   11.110675] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] ([B]0461:4e1d[/B])
Oct 29 02:12:40 jupiter kernel: [   11.397654] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
Oct 29 02:12:40 jupiter kernel: [   11.397699] usbcore: registered new interface driver uvcvideo
Oct 29 02:12:40 jupiter kernel: [   11.397701] USB Video Class driver (1.1.1)

Jak widać kamerka została rozpoznana poprawnie. System z którego pochodził log pracuje na jądrze 3.11, a moduły UVC znajdują się standardowo w jądrze. Wniosek z tego taki, że wymagane może być jądro 3.11. Niestety trzeba wnioskować w ten sposób, ponieważ na oficjalnej liście urządzeń wspieranych przez UVC nie ma tej kamery.