[+] Sterowniki, grafika, dźwi

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
Golima
Posty: 20
Rejestracja: 23 maja 2012, 00:50

[+] Sterowniki, grafika, dźwięk - Intel, Nvidia

Post autor: Golima »

Witam
kolejne problemy. Udało mi się zainstalować wifi oraz środowisko graficzne, a teraz chciałbym zainstalować dźwięk oraz grafikę.
Dostarczam logi, o które prosiliście:

Jądro:

Kod: Zaznacz cały

Linux Golima 3.13-1-amd64 #1 SMP Debian 3.13.10-1 (2014-04-15) x86_64 GNU/Linux
Architektura systemu:

Kod: Zaznacz cały

amd64
Sprzęt:

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)	Subsystem: Lenovo Device 3975
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
	Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
	Subsystem: Lenovo Device 397d
	Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Lenovo Device 3975
	Kernel driver in use: mei_me
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
	Subsystem: Lenovo Device 3975
	Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
	Subsystem: Lenovo Device 3975
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
	Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
	Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
	Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
	Subsystem: Lenovo Device 3975
	Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
	Subsystem: Lenovo Device 3975
	Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
	Subsystem: Lenovo Device 3975
	Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
	Subsystem: Lenovo Device 3975
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
	Subsystem: Lenovo Device 397d
	Kernel driver in use: nouveau
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]
	Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN
	Kernel driver in use: iwlwifi
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
	Subsystem: Lenovo Device 3975
	Kernel driver in use: r8169

Kod: Zaznacz cały

00:00.0 0600: 8086:0104 (rev 09)
00:01.0 0604: 8086:0101 (rev 09)
00:02.0 0300: 8086:0116 (rev 09)
00:16.0 0780: 8086:1c3a (rev 04)
00:1a.0 0c03: 8086:1c2d (rev 05)
00:1b.0 0403: 8086:1c20 (rev 05)
00:1c.0 0604: 8086:1c10 (rev b5)
00:1c.1 0604: 8086:1c12 (rev b5)
00:1c.3 0604: 8086:1c16 (rev b5)
00:1d.0 0c03: 8086:1c26 (rev 05)
00:1f.0 0601: 8086:1c49 (rev 05)
00:1f.2 0106: 8086:1c03 (rev 05)
00:1f.3 0c05: 8086:1c22 (rev 05)
01:00.0 0300: 10de:0de9 (rev a1)
03:00.0 0280: 8086:0084
04:00.0 0200: 10ec:8136 (rev 05)
Grafika, chciałbym zaznaczyć, że mam 2 karty graficzne, intela oraz nvidia 630m dedykowana:

Kod: Zaznacz cały

[    28.220] X.Org X Server 1.15.1
Release Date: 2014-04-13
[    28.220] X Protocol Version 11, Revision 0
[    28.220] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[    28.220] Current Operating System: Linux Golima 3.13-1-amd64 #1 SMP Debian 3.13.10-1 (2014-04-15) x86_64
[    28.220] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13-1-amd64 root=UUID=e13bc79c-1f71-4674-b070-160ab92304c7 ro quiet
[    28.220] Build Date: 15 April 2014  06:58:36PM
[    28.220] xorg-server 2:1.15.1-1 (http://www.debian.org/support) 
[    28.220] Current version of pixman: 0.32.4
[    28.220] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    28.220] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.221] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May  2 12:10:14 2014
[    28.237] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.251] (==) No Layout section.  Using the first Screen section.
[    28.251] (==) No screen section available. Using defaults.
[    28.251] (**) |-->Screen "Default Screen Section" (0)
[    28.251] (**) |   |-->Monitor "<default monitor>"
[    28.260] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    28.261] (==) Automatically adding devices
[    28.261] (==) Automatically enabling devices
[    28.261] (==) Automatically adding GPU devices
[    28.449] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.449] 	Entry deleted from font path.
[    28.449] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    28.449] 	Entry deleted from font path.
[    28.449] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    28.449] 	Entry deleted from font path.
[    28.449] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    28.449] 	Entry deleted from font path.
[    28.449] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    28.449] 	Entry deleted from font path.
[    28.449] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    28.449] 	Entry deleted from font path.
[    28.449] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	built-ins
[    28.449] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.449] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.449] (II) Loader magic: 0x7f78b6d76d40
[    28.449] (II) Module ABI versions:
[    28.449] 	X.Org ANSI C Emulation: 0.4
[    28.449] 	X.Org Video Driver: 15.0
[    28.449] 	X.Org XInput driver : 20.0
[    28.449] 	X.Org Server Extension : 8.0
[    28.449] (II) xfree86: Adding drm device (/dev/dri/card1)
[    28.975] (II) xfree86: Adding drm device (/dev/dri/card0)
[    28.976] (--) PCI:*(0:0:2:0) 8086:0116:17aa:397d rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[    28.976] (--) PCI: (0:1:0:0) 10de:0de9:17aa:397d rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[    29.010] Initializing built-in extension Generic Event Extension
[    29.010] Initializing built-in extension SHAPE
[    29.010] Initializing built-in extension MIT-SHM
[    29.010] Initializing built-in extension XInputExtension
[    29.010] Initializing built-in extension XTEST
[    29.010] Initializing built-in extension BIG-REQUESTS
[    29.010] Initializing built-in extension SYNC
[    29.010] Initializing built-in extension XKEYBOARD
[    29.010] Initializing built-in extension XC-MISC
[    29.010] Initializing built-in extension SECURITY
[    29.010] Initializing built-in extension XINERAMA
[    29.010] Initializing built-in extension XFIXES
[    29.010] Initializing built-in extension RENDER
[    29.010] Initializing built-in extension RANDR
[    29.010] Initializing built-in extension COMPOSITE
[    29.010] Initializing built-in extension DAMAGE
[    29.010] Initializing built-in extension MIT-SCREEN-SAVER
[    29.010] Initializing built-in extension DOUBLE-BUFFER
[    29.010] Initializing built-in extension RECORD
[    29.010] Initializing built-in extension DPMS
[    29.010] Initializing built-in extension Present
[    29.010] Initializing built-in extension DRI3
[    29.010] Initializing built-in extension X-Resource
[    29.010] Initializing built-in extension XVideo
[    29.010] Initializing built-in extension XVideo-MotionCompensation
[    29.010] Initializing built-in extension SELinux
[    29.010] Initializing built-in extension XFree86-VidModeExtension
[    29.011] Initializing built-in extension XFree86-DGA
[    29.011] Initializing built-in extension XFree86-DRI
[    29.011] Initializing built-in extension DRI2
[    29.011] (II) LoadModule: "glx"
[    29.019] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    29.025] (II) Module glx: vendor="X.Org Foundation"
[    29.025] 	compiled for 1.15.1, module version = 1.0.0
[    29.025] 	ABI class: X.Org Server Extension, version 8.0
[    29.025] (==) AIGLX enabled
[    29.025] Loading extension GLX
[    29.025] (==) Matched intel as autoconfigured driver 0
[    29.025] (==) Matched nouveau as autoconfigured driver 1
[    29.025] (==) Matched nv as autoconfigured driver 2
[    29.025] (==) Matched intel as autoconfigured driver 3
[    29.025] (==) Matched modesetting as autoconfigured driver 4
[    29.025] (==) Matched fbdev as autoconfigured driver 5
[    29.025] (==) Matched vesa as autoconfigured driver 6
[    29.025] (==) Assigned the driver to the xf86ConfigLayout
[    29.025] (II) LoadModule: "intel"
[    29.036] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    29.097] (II) Module intel: vendor="X.Org Foundation"
[    29.097] 	compiled for 1.15.0, module version = 2.21.15
[    29.097] 	Module class: X.Org Video Driver
[    29.097] 	ABI class: X.Org Video Driver, version 15.0
[    29.097] (II) LoadModule: "nouveau"
[    29.097] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    29.120] (II) Module nouveau: vendor="X.Org Foundation"
[    29.120] 	compiled for 1.15.0, module version = 1.0.10
[    29.120] 	Module class: X.Org Video Driver
[    29.120] 	ABI class: X.Org Video Driver, version 15.0
[    29.120] (II) LoadModule: "nv"
[    29.120] (WW) Warning, couldn't open module nv
[    29.120] (II) UnloadModule: "nv"
[    29.120] (II) Unloading nv
[    29.120] (EE) Failed to load module "nv" (module does not exist, 0)
[    29.120] (II) LoadModule: "modesetting"
[    29.121] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    29.136] (II) Module modesetting: vendor="X.Org Foundation"
[    29.136] 	compiled for 1.15.0, module version = 0.8.1
[    29.136] 	Module class: X.Org Video Driver
[    29.136] 	ABI class: X.Org Video Driver, version 15.0
[    29.136] (II) LoadModule: "fbdev"
[    29.136] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    29.147] (II) Module fbdev: vendor="X.Org Foundation"
[    29.147] 	compiled for 1.15.0, module version = 0.4.4
[    29.147] 	Module class: X.Org Video Driver
[    29.147] 	ABI class: X.Org Video Driver, version 15.0
[    29.147] (II) LoadModule: "vesa"
[    29.147] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    29.161] (II) Module vesa: vendor="X.Org Foundation"
[    29.161] 	compiled for 1.15.0, module version = 2.3.3
[    29.161] 	Module class: X.Org Video Driver
[    29.161] 	ABI class: X.Org Video Driver, version 15.0
[    29.161] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    29.162] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    29.162] (II) NOUVEAU driver for NVIDIA chipset families :
[    29.162] 	RIVA TNT        (NV04)
[    29.162] 	RIVA TNT2       (NV05)
[    29.162] 	GeForce 256     (NV10)
[    29.162] 	GeForce 2       (NV11, NV15)
[    29.162] 	GeForce 4MX     (NV17, NV18)
[    29.162] 	GeForce 3       (NV20)
[    29.162] 	GeForce 4Ti     (NV25, NV28)
[    29.162] 	GeForce FX      (NV3x)
[    29.162] 	GeForce 6       (NV4x)
[    29.162] 	GeForce 7       (G7x)
[    29.162] 	GeForce 8       (G8x)
[    29.162] 	GeForce GTX 200 (NVA0)
[    29.162] 	GeForce GTX 400 (NVC0)
[    29.162] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    29.162] (II) FBDEV: driver for framebuffer: fbdev
[    29.162] (II) VESA: driver for VESA chipsets: vesa
[    29.162] (++) using VT number 7


[    29.172] (II) [drm] nouveau interface version: 1.1.1
[    29.172] (WW) Falling back to old probe method for modesetting
[    29.172] (WW) Falling back to old probe method for fbdev
[    29.172] (II) Loading sub module "fbdevhw"
[    29.172] (II) LoadModule: "fbdevhw"
[    29.172] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    29.185] (II) Module fbdevhw: vendor="X.Org Foundation"
[    29.185] 	compiled for 1.15.1, module version = 0.0.2
[    29.185] 	ABI class: X.Org Video Driver, version 15.0
[    29.185] (WW) Falling back to old probe method for vesa
[    29.185] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    29.185] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    29.185] (==) intel(0): RGB weight 888
[    29.185] (==) intel(0): Default visual is TrueColor
[    29.185] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    29.185] (**) intel(0): Relaxed fencing enabled
[    29.185] (**) intel(0): Wait on SwapBuffers? enabled
[    29.185] (**) intel(0): Triple buffering? enabled
[    29.185] (**) intel(0): Framebuffer tiled
[    29.185] (**) intel(0): Pixmaps tiled
[    29.185] (**) intel(0): 3D buffers tiled
[    29.185] (**) intel(0): SwapBuffers wait enabled
[    29.185] (==) intel(0): video overlay key set to 0x101fe
[    29.185] (II) intel(0): Output LVDS1 has no monitor section
[    29.186] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    29.187] (II) intel(0): Output VGA1 has no monitor section
[    29.187] (II) intel(0): Output HDMI1 has no monitor section
[    29.187] (II) intel(0): Output DP1 has no monitor section
[    29.187] (II) intel(0): EDID for output LVDS1
[    29.187] (II) intel(0): Manufacturer: SEC  Model: 4252  Serial#: 0
[    29.187] (II) intel(0): Year: 2010  Week: 0
[    29.187] (II) intel(0): EDID Version: 1.3
[    29.187] (II) intel(0): Digital Display Input
[    29.187] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    29.187] (II) intel(0): Gamma: 2.20
[    29.188] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[    29.188] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    29.188] (II) intel(0): First detailed timing is preferred mode
[    29.188] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    29.188] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    29.188] (II) intel(0): Manufacturer's mask: 0
[    29.188] (II) intel(0): Supported detailed timing:
[    29.188] (II) intel(0): clock: 74.8 MHz   Image Size:  344 x 194 mm
[    29.188] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1578 h_border: 0
[    29.188] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    29.188] (II) intel(0): Unknown vendor-specific block f
[    29.188] (II) intel(0):  SAMSUNG
[    29.188] (II) intel(0):  LTN156AT24L01
[    29.188] (II) intel(0): EDID (in hex):
[    29.188] (II) intel(0): 	00ffffffffffff004ca3524200000000
[    29.188] (II) intel(0): 	0014010380221378eac8959e57549226
[    29.188] (II) intel(0): 	0f505400000001010101010101010101
[    29.188] (II) intel(0): 	010101010101381d56d4500016303020
[    29.188] (II) intel(0): 	250058c2100000190000000f00000000
[    29.188] (II) intel(0): 	000000000025d9066a00000000fe0053
[    29.188] (II) intel(0): 	414d53554e470a204ca34154000000fe
[    29.188] (II) intel(0): 	004c544e313536415432344c303100ef
[    29.188] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    29.188] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    29.188] (II) intel(0): Printing probed modes for output LVDS1
[    29.188] (II) intel(0): Modeline "1366x768"x60.0   74.80  1366 1414 1446 1578  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    29.188] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    29.188] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    29.188] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    29.188] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    29.188] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    29.188] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    29.190] (II) intel(0): EDID for output VGA1
[    29.190] (II) intel(0): EDID for output HDMI1
[    29.190] (II) intel(0): EDID for output DP1
[    29.190] (II) intel(0): Output LVDS1 connected
[    29.190] (II) intel(0): Output VGA1 disconnected
[    29.190] (II) intel(0): Output HDMI1 disconnected
[    29.190] (II) intel(0): Output DP1 disconnected
[    29.190] (II) intel(0): Using exact sizes for initial modes
[    29.190] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    29.190] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    29.190] (II) intel(0): Kernel page flipping support detected, enabling
[    29.190] (==) intel(0): DPI set to (96, 96)
[    29.190] (II) Loading sub module "fb"
[    29.190] (II) LoadModule: "fb"
[    29.190] (II) Loading /usr/lib/xorg/modules/libfb.so
[    29.219] (II) Module fb: vendor="X.Org Foundation"
[    29.219] 	compiled for 1.15.1, module version = 1.0.0
[    29.219] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    29.219] (II) Loading sub module "dri2"
[    29.219] (II) LoadModule: "dri2"
[    29.219] (II) Module "dri2" already built-in
[    29.219] (II) Loading sub module "dri2"
[    29.219] (II) LoadModule: "dri2"
[    29.219] (II) Module "dri2" already built-in
[    29.219] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[    29.219] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    29.219] (==) NOUVEAU(G0): RGB weight 888
[    29.219] (==) NOUVEAU(G0): Default visual is TrueColor
[    29.219] (==) NOUVEAU(G0): Using HW cursor
[    29.219] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[    29.219] (==) NOUVEAU(G0): Page flipping enabled
[    29.219] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[    29.237] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[    29.247] (II) NOUVEAU(G0): EDID for output VGA-1-2
[    29.247] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[    29.247] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    29.247] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    29.247] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    29.247] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    29.247] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    29.247] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    29.247] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    29.247] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    29.247] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    29.247] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    29.247] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    29.247] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    29.247] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    29.247] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    29.247] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    29.247] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    29.247] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    29.247] (==) NOUVEAU(G0): DPI set to (96, 96)
[    29.247] (II) Loading sub module "fb"
[    29.247] (II) LoadModule: "fb"
[    29.248] (II) Loading /usr/lib/xorg/modules/libfb.so
[    29.248] (II) Module fb: vendor="X.Org Foundation"
[    29.248] 	compiled for 1.15.1, module version = 1.0.0
[    29.248] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    29.248] (II) Loading sub module "exa"
[    29.248] (II) LoadModule: "exa"
[    29.248] (II) Loading /usr/lib/xorg/modules/libexa.so
[    29.260] (II) Module exa: vendor="X.Org Foundation"
[    29.260] 	compiled for 1.15.1, module version = 2.6.0
[    29.260] 	ABI class: X.Org Video Driver, version 15.0
[    29.260] (II) Loading sub module "shadowfb"
[    29.260] (II) LoadModule: "shadowfb"
[    29.260] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    29.261] (II) Module shadowfb: vendor="X.Org Foundation"
[    29.261] 	compiled for 1.15.1, module version = 1.0.0
[    29.261] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    29.261] (II) UnloadModule: "modesetting"
[    29.261] (II) Unloading modesetting
[    29.261] (II) UnloadModule: "fbdev"
[    29.261] (II) Unloading fbdev
[    29.261] (II) UnloadSubModule: "fbdevhw"
[    29.261] (II) Unloading fbdevhw
[    29.261] (II) UnloadModule: "vesa"
[    29.261] (II) Unloading vesa
[    29.261] (==) Depth 24 pixmap format is 32 bpp
[    29.263] (II) NOUVEAU(G0): Opened GPU channel 0
[    29.277] (II) NOUVEAU(G0): [DRI2] Setup complete
[    29.277] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    29.277] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    29.284] (II) EXA(256): Driver allocated offscreen pixmaps
[    29.284] (II) EXA(256): Driver registered support for the following operations:
[    29.284] (II)         Solid
[    29.284] (II)         Copy
[    29.284] (II)         Composite (RENDER acceleration)
[    29.284] (II)         UploadToScreen
[    29.284] (II)         DownloadFromScreen
[    29.284] (==) NOUVEAU(G0): Backing store enabled
[    29.284] (==) NOUVEAU(G0): Silken mouse enabled
[    29.284] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    29.285] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    29.285] (==) NOUVEAU(G0): DPMS enabled
[    29.285] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    29.293] (II) intel(0): [DRI2] Setup complete
[    29.293] (II) intel(0): [DRI2]   DRI driver: i965
[    29.293] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    29.294] (II) UXA(0): Driver registered support for the following operations:
[    29.294] (II)         solid
[    29.294] (II)         copy
[    29.294] (II)         composite (RENDER acceleration)
[    29.294] (II)         put_image
[    29.294] (II)         get_image
[    29.294] (==) intel(0): Backing store enabled
[    29.294] (==) intel(0): Silken mouse enabled
[    29.294] (II) intel(0): Initializing HW Cursor
[    29.295] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    29.296] (==) intel(0): DPMS enabled
[    29.296] (==) intel(0): Intel XvMC decoder enabled
[    29.296] (II) intel(0): Set up textured video
[    29.296] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    29.296] (II) intel(0): direct rendering: DRI2 Enabled
[    29.296] (==) intel(0): hotplug detection: "enabled"
[    29.316] (--) RandR disabled
[    29.323] (II) SELinux: Disabled on system
[    29.515] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    29.515] (II) AIGLX: enabled GLX_ARB_create_context
[    29.515] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    29.515] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    29.515] (II) AIGLX: enabled GLX_INTEL_swap_event
[    29.515] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    29.515] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    29.515] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    29.515] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    29.515] (II) AIGLX: Loaded and initialized i965
[    29.515] (II) GLX: Initialized DRI2 GL provider for screen 0
[    29.518] (II) NOUVEAU(G0): NVEnterVT is called.
[    29.518] (II) intel(0): Setting screen physical size to 361 x 203
[    29.804] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    29.804] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    29.804] (II) LoadModule: "evdev"
[    29.804] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    29.830] (II) Module evdev: vendor="X.Org Foundation"
[    29.830] 	compiled for 1.15.0, module version = 2.8.2
[    29.830] 	Module class: X.Org XInput Driver
[    29.830] 	ABI class: X.Org XInput driver, version 20.0
[    29.830] (II) Using input driver 'evdev' for 'Power Button'
[    29.830] (**) Power Button: always reports core events
[    29.830] (**) evdev: Power Button: Device: "/dev/input/event6"
[    29.830] (--) evdev: Power Button: Vendor 0 Product 0x1
[    29.830] (--) evdev: Power Button: Found keys
[    29.830] (II) evdev: Power Button: Configuring as keyboard
[    29.830] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[    29.830] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.830] (**) Option "xkb_rules" "evdev"
[    29.830] (**) Option "xkb_model" "pc105"
[    29.831] (**) Option "xkb_layout" "pl"
[    29.858] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[    29.858] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    29.858] (II) Using input driver 'evdev' for 'Video Bus'
[    29.858] (**) Video Bus: always reports core events
[    29.858] (**) evdev: Video Bus: Device: "/dev/input/event15"
[    29.858] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    29.858] (--) evdev: Video Bus: Found keys
[    29.858] (II) evdev: Video Bus: Configuring as keyboard
[    29.858] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16/event15"
[    29.858] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    29.858] (**) Option "xkb_rules" "evdev"
[    29.858] (**) Option "xkb_model" "pc105"
[    29.858] (**) Option "xkb_layout" "pl"
[    29.859] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[    29.859] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    29.859] (II) Using input driver 'evdev' for 'Video Bus'
[    29.859] (**) Video Bus: always reports core events
[    29.859] (**) evdev: Video Bus: Device: "/dev/input/event14"
[    29.859] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    29.859] (--) evdev: Video Bus: Found keys
[    29.859] (II) evdev: Video Bus: Configuring as keyboard
[    29.859] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input15/event14"
[    29.859] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    29.859] (**) Option "xkb_rules" "evdev"
[    29.859] (**) Option "xkb_model" "pc105"
[    29.859] (**) Option "xkb_layout" "pl"
[    29.860] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    29.860] (II) No input driver specified, ignoring this device.
[    29.860] (II) This device may have been added with another device file.
[    29.860] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    29.860] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    29.860] (II) Using input driver 'evdev' for 'Sleep Button'
[    29.860] (**) Sleep Button: always reports core events
[    29.860] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[    29.860] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    29.860] (--) evdev: Sleep Button: Found keys
[    29.860] (II) evdev: Sleep Button: Configuring as keyboard
[    29.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event5"
[    29.860] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    29.860] (**) Option "xkb_rules" "evdev"
[    29.860] (**) Option "xkb_model" "pc105"
[    29.860] (**) Option "xkb_layout" "pl"
[    29.860] (II) config/udev: Adding drm device (/dev/dri/card1)
[    29.861] (II) config/udev: Adding drm device (/dev/dri/card0)
[    29.861] (II) config/udev: Adding input device 2.4GRF Mouse (/dev/input/event1)
[    29.861] (**) 2.4GRF Mouse: Applying InputClass "evdev pointer catchall"
[    29.861] (II) Using input driver 'evdev' for '2.4GRF Mouse'
[    29.861] (**) 2.4GRF Mouse: always reports core events
[    29.861] (**) evdev: 2.4GRF Mouse: Device: "/dev/input/event1"
[    29.861] (--) evdev: 2.4GRF Mouse: Vendor 0x4f3 Product 0xa3
[    29.861] (--) evdev: 2.4GRF Mouse: Found 9 mouse buttons
[    29.861] (--) evdev: 2.4GRF Mouse: Found scroll wheel(s)
[    29.861] (--) evdev: 2.4GRF Mouse: Found relative axes
[    29.861] (--) evdev: 2.4GRF Mouse: Found x and y relative axes
[    29.861] (II) evdev: 2.4GRF Mouse: Configuring as mouse
[    29.861] (II) evdev: 2.4GRF Mouse: Adding scrollwheel support
[    29.861] (**) evdev: 2.4GRF Mouse: YAxisMapping: buttons 4 and 5
[    29.861] (**) evdev: 2.4GRF Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    29.861] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2/event1"
[    29.861] (II) XINPUT: Adding extended input device "2.4GRF Mouse" (type: MOUSE, id 10)
[    29.861] (II) evdev: 2.4GRF Mouse: initialized for relative axes.
[    29.862] (**) 2.4GRF Mouse: (accel) keeping acceleration scheme 1
[    29.862] (**) 2.4GRF Mouse: (accel) acceleration profile 0
[    29.862] (**) 2.4GRF Mouse: (accel) acceleration factor: 2.000
[    29.862] (**) 2.4GRF Mouse: (accel) acceleration threshold: 4
[    29.862] (II) config/udev: Adding input device 2.4GRF Mouse (/dev/input/mouse0)
[    29.862] (II) No input driver specified, ignoring this device.
[    29.862] (II) This device may have been added with another device file.
[    29.862] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event11)
[    29.862] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[    29.862] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[    29.862] (**) Lenovo EasyCamera: always reports core events
[    29.862] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event11"
[    29.862] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x364
[    29.862] (--) evdev: Lenovo EasyCamera: Found keys
[    29.862] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[    29.862] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input13/event11"
[    29.862] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[    29.862] (**) Option "xkb_rules" "evdev"
[    29.862] (**) Option "xkb_model" "pc105"
[    29.862] (**) Option "xkb_layout" "pl"
[    29.863] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[    29.863] (II) No input driver specified, ignoring this device.
[    29.863] (II) This device may have been added with another device file.
[    29.863] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[    29.863] (II) No input driver specified, ignoring this device.
[    29.863] (II) This device may have been added with another device file.
[    29.863] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    29.864] (II) No input driver specified, ignoring this device.
[    29.864] (II) This device may have been added with another device file.
[    29.864] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    29.864] (II) No input driver specified, ignoring this device.
[    29.864] (II) This device may have been added with another device file.
[    29.864] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event2)
[    29.864] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[    29.864] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[    29.864] (**) Ideapad extra buttons: always reports core events
[    29.864] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event2"
[    29.864] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[    29.864] (--) evdev: Ideapad extra buttons: Found keys
[    29.864] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[    29.864] (**) Option "config_info" "udev:/sys/devices/platform/VPC2004:00/input/input3/event2"
[    29.864] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[    29.864] (**) Option "xkb_rules" "evdev"
[    29.864] (**) Option "xkb_model" "pc105"
[    29.864] (**) Option "xkb_layout" "pl"
[    29.865] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    29.865] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    29.865] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    29.865] (**) AT Translated Set 2 keyboard: always reports core events
[    29.865] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    29.865] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    29.865] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    29.865] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    29.865] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    29.865] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    29.865] (**) Option "xkb_rules" "evdev"
[    29.865] (**) Option "xkb_model" "pc105"
[    29.865] (**) Option "xkb_layout" "pl"
[    29.865] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event13)
[    29.865] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    29.865] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    29.865] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    29.865] (II) LoadModule: "synaptics"
[    29.866] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    29.881] (II) Module synaptics: vendor="X.Org Foundation"
[    29.881] 	compiled for 1.15.0, module version = 1.7.3
[    29.881] 	Module class: X.Org XInput Driver
[    29.881] 	ABI class: X.Org XInput driver, version 20.0
[    29.881] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    29.881] (**) ETPS/2 Elantech Touchpad: always reports core events
[    29.881] (**) Option "Device" "/dev/input/event13"
[    30.092] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2934 (res 0)
[    30.092] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1304 (res 0)
[    30.092] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    30.092] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    30.092] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    30.092] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    30.092] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    30.092] (**) ETPS/2 Elantech Touchpad: always reports core events
[    30.188] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event13"
[    30.188] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    30.188] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    30.188] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    30.188] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.062
[    30.188] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    30.188] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    30.188] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    30.188] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    30.188] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    30.189] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    30.189] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    30.189] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[    30.189] (II) No input driver specified, ignoring this device.
[    30.189] (II) This device may have been added with another device file.
[    30.190] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event12)
[    30.190] (II) No input driver specified, ignoring this device.
[    30.190] (II) This device may have been added with another device file.
[    30.190] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[    30.190] (II) No input driver specified, ignoring this device.
[    30.190] (II) This device may have been added with another device file.
[    40.576] (II) intel(0): EDID vendor "SEC", prod id 16978
[    40.576] (II) intel(0): Printing DDC gathered Modelines:
[    40.576] (II) intel(0): Modeline "1366x768"x0.0   74.80  1366 1414 1446 1578  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    40.577] (II) intel(0): EDID vendor "SEC", prod id 16978
[    40.577] (II) intel(0): Printing DDC gathered Modelines:
[    40.577] (II) intel(0): Modeline "1366x768"x0.0   74.80  1366 1414 1446 1578  768 770 775 790 -hsync -vsync (47.4 kHz eP)
Dźwięk:

Kod: Zaznacz cały

 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xf1600000 irq 43

Kod: Zaznacz cały

 0 snd_hda_intel

Kod: Zaznacz cały

Advanced Linux Sound Architecture Driver Version k3.13-1-amd64.
Chciałbym również dodać, że jestem początkującym użytkownikiem Debiana i tych pytań będzie więcej.

Pozdrawiam
Awatar użytkownika
Rafal_F
Moderator
Posty: 2350
Rejestracja: 29 sierpnia 2008, 16:45

Post autor: Rafal_F »

Do dźwięku: threads/30242-Karta-dźwiękowa-widziana- ... ęku-nie-ma
Do grafiki: https://wiki.debian.org/Bumblebee <= przeczytaj dokładnie całą stronę zanim zaczniesz instalować.
Golima
Posty: 20
Rejestracja: 23 maja 2012, 00:50

Post autor: Golima »

Niestety czynności, które są w/w temacie nie pomogło.
Podaje raport ze skryptu: http://www.alsa-project.org/db/?f=80089 ... 6114c7323f
Awatar użytkownika
Rafal_F
Moderator
Posty: 2350
Rejestracja: 29 sierpnia 2008, 16:45

Post autor: Rafal_F »

Sprawdzałeś w alsamixer czy nic nie jest wyciszone?
Bo w skrypcie jest wiele na off.
Golima
Posty: 20
Rejestracja: 23 maja 2012, 00:50

Post autor: Golima »

Hah, ok. Myślałem, że jak jest MM to nie jest wyciszone. Sorry za gafę. Dobra dźwięk trybi, co z grafiką ?

//edit
jeszcze co do dźwięku, to jest możliwość dodania jakiegoś suwaka, tak jak ma to miejsce na windowsie ?
Awatar użytkownika
Rafal_F
Moderator
Posty: 2350
Rejestracja: 29 sierpnia 2008, 16:45

Post autor: Rafal_F »

Grafika to technologia nvidia optimus, średnio z tym pod linuksem. Skorzystaj z tego: https://wiki.debian.org/Bumblebee <= przed instalacją przeczytaj cały tekst.
Golima
Posty: 20
Rejestracja: 23 maja 2012, 00:50

Post autor: Golima »

nie wiem co zrobiłem, ale środowisko graficzne przestało mi działać. Chyba jednak linux nie dla mnie.
Awatar użytkownika
Rafal_F
Moderator
Posty: 2350
Rejestracja: 29 sierpnia 2008, 16:45

Post autor: Rafal_F »

Ja też nie wiem co zrobiłeś. Jak jesteś zainteresowany reanimacją to napisz co ostatnio robiłeś i wklej log /var/log/Xorg.0.log.
Golima
Posty: 20
Rejestracja: 23 maja 2012, 00:50

Post autor: Golima »

Kod: Zaznacz cały

[    24.537] X.Org X Server 1.15.1
Release Date: 2014-04-13
[    24.537] X Protocol Version 11, Revision 0
[    24.537] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[    24.537] Current Operating System: Linux Golima 3.13-1-amd64 #1 SMP Debian 3.13.10-1 (2014-04-15) x86_64
[    24.537] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13-1-amd64 root=UUID=e13bc79c-1f71-4674-b070-160ab92304c7 ro quiet
[    24.537] Build Date: 15 April 2014  06:58:36PM
[    24.537] xorg-server 2:1.15.1-1 (http://www.debian.org/support) 
[    24.537] Current version of pixman: 0.32.4
[    24.537] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    24.537] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.537] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May  3 10:40:21 2014
[    24.576] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    24.576] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.598] (==) No Layout section.  Using the first Screen section.
[    24.598] (==) No screen section available. Using defaults.
[    24.598] (**) |-->Screen "Default Screen Section" (0)
[    24.598] (**) |   |-->Monitor "<default monitor>"
[    24.611] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    24.611] (**) |   |-->Device "My GPU"
[    24.611] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    24.611] (==) Automatically adding devices
[    24.611] (==) Automatically enabling devices
[    24.611] (==) Automatically adding GPU devices
[    24.692] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.692] 	Entry deleted from font path.
[    24.692] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    24.692] 	Entry deleted from font path.
[    24.692] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    24.692] 	Entry deleted from font path.
[    24.692] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    24.692] 	Entry deleted from font path.
[    24.692] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    24.692] 	Entry deleted from font path.
[    24.692] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    24.692] 	Entry deleted from font path.
[    24.692] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	built-ins
[    24.692] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.692] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.692] (II) Loader magic: 0x7f248743bd40
[    24.692] (II) Module ABI versions:
[    24.692] 	X.Org ANSI C Emulation: 0.4
[    24.692] 	X.Org Video Driver: 15.0
[    24.692] 	X.Org XInput driver : 20.0
[    24.692] 	X.Org Server Extension : 8.0
[    24.693] (II) xfree86: Adding drm device (/dev/dri/card0)
[    24.695] (--) PCI:*(0:0:2:0) 8086:0116:17aa:397d rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[    24.707] Initializing built-in extension Generic Event Extension
[    24.707] Initializing built-in extension SHAPE
[    24.708] Initializing built-in extension MIT-SHM
[    24.708] Initializing built-in extension XInputExtension
[    24.708] Initializing built-in extension XTEST
[    24.708] Initializing built-in extension BIG-REQUESTS
[    24.708] Initializing built-in extension SYNC
[    24.708] Initializing built-in extension XKEYBOARD
[    24.708] Initializing built-in extension XC-MISC
[    24.708] Initializing built-in extension SECURITY
[    24.708] Initializing built-in extension XINERAMA
[    24.708] Initializing built-in extension XFIXES
[    24.708] Initializing built-in extension RENDER
[    24.708] Initializing built-in extension RANDR
[    24.708] Initializing built-in extension COMPOSITE
[    24.708] Initializing built-in extension DAMAGE
[    24.708] Initializing built-in extension MIT-SCREEN-SAVER
[    24.708] Initializing built-in extension DOUBLE-BUFFER
[    24.708] Initializing built-in extension RECORD
[    24.708] Initializing built-in extension DPMS
[    24.708] Initializing built-in extension Present
[    24.708] Initializing built-in extension DRI3
[    24.708] Initializing built-in extension X-Resource
[    24.708] Initializing built-in extension XVideo
[    24.708] Initializing built-in extension XVideo-MotionCompensation
[    24.708] Initializing built-in extension SELinux
[    24.708] Initializing built-in extension XFree86-VidModeExtension
[    24.708] Initializing built-in extension XFree86-DGA
[    24.708] Initializing built-in extension XFree86-DRI
[    24.708] Initializing built-in extension DRI2
[    24.708] (II) LoadModule: "glx"
[    24.734] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    24.752] (II) Module glx: vendor="X.Org Foundation"
[    24.752] 	compiled for 1.15.1, module version = 1.0.0
[    24.752] 	ABI class: X.Org Server Extension, version 8.0
[    24.752] (==) AIGLX enabled
[    24.752] Loading extension GLX
[    24.753] (II) LoadModule: "nvidia"
[    24.767] (WW) Warning, couldn't open module nvidia
[    24.767] (II) UnloadModule: "nvidia"
[    24.767] (II) Unloading nvidia
[    24.767] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    24.767] (EE) No drivers available.
[    24.767] (EE) 
Fatal server error:
[    24.767] (EE) no screens found(EE) 
[    24.767] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    24.767] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    24.767] (EE) 
Ostatnie co robiłem to: https://wiki.debian.org/NvidiaGraphicsDrivers#configure

Ciężko poruszać się w dokumentacji ANG, nie mając żadnego pojęcia jak działa system. Praktycznie klepiąc pewne komendy ja nie wiem co tak naprawdę robię i jaki to da skutek, choć to drugie to widać jak na dłoni <wysiadło środowisko>.
Awatar użytkownika
Rafal_F
Moderator
Posty: 2350
Rejestracja: 29 sierpnia 2008, 16:45

Post autor: Rafal_F »

1. Usuń plik: /etc/X11/xorg.conf.d/20-nvidia.conf:

Kod: Zaznacz cały

rm /etc/X11/xorg.conf.d/20-nvidia.conf
2. Zainstalowałeś sterowniki zamknięte? Twoja karta wspierana jest przez najnowszy sterownik, w związku z tym powinieneś zainstalować to w ten sposób (po dodaniu słowa "nonfree" do repozytorium:

Kod: Zaznacz cały

aptitude -r install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') nvidia-kernel-dkms
3. Nie twórz pliku xorg.conf.
4. Teraz zainstaluj: https://wiki.debian.org/Bumblebee trzymaj się części dla swojej wersji systemu operacyjnego i wyrażeń "proprietary nvidia driver".
ODPOWIEDZ