Ok wstało środowisko. Ale mam pytanie... Skąd np. będę wiedział, że zainstalowałem sterownik i że jest on dobry, że działa, wszystko ok ? Przykładowo na winie menadzer urządzeń i pokazywał wsio, co jest, czego nie ma.
Dobra wykonałem powyższe pkt. Zainstalowałem Bumblebee, ale jak z tego korzystać ? Skąd mam wiedzieć, że ta karta jest już zainstalowana, oraz nie rozumiem sekcji z Power Management.
[+] Sterowniki, grafika, dźwi
- Zainstalowałeś bubblebee?
- Wklej jeszcze raz log /var/log/Xorg.0.log
- Zainstaluj pakiet: mesa-utils.
- Uruchom 2 polecenia:
Jeżeli wszystko poszło OK, to pierwsze powinno renderować obraz z wykorzystaniem karty intela, a drugie z wykorzystaniem karty nvidii.
Kod: Zaznacz cały
glxgears -info optirun glxgears -info - Co do zarządzania mocą, to: https://github.com/Bumblebee-Project/bbswitch <= przeczytaj co to jest i jak się tego używa (rozdział "Usage").
Kod: Zaznacz cały
[ 29.229]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 29.230] X Protocol Version 11, Revision 0
[ 29.230] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[ 29.230] Current Operating System: Linux Golima 3.13-1-amd64 #1 SMP Debian 3.13.10-1 (2014-04-15) x86_64
[ 29.230] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13-1-amd64 root=UUID=e13bc79c-1f71-4674-b070-160ab92304c7 ro quiet
[ 29.230] Build Date: 15 April 2014 06:58:36PM
[ 29.230] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 29.230] Current version of pixman: 0.32.4
[ 29.230] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29.230] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29.230] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 3 13:21:00 2014
[ 29.280] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 29.293] (==) No Layout section. Using the first Screen section.
[ 29.294] (==) No screen section available. Using defaults.
[ 29.294] (**) |-->Screen "Default Screen Section" (0)
[ 29.294] (**) | |-->Monitor "<default monitor>"
[ 29.303] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 29.304] (==) Automatically adding devices
[ 29.304] (==) Automatically enabling devices
[ 29.304] (==) Automatically adding GPU devices
[ 29.329] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 29.329] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 29.329] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 29.329] (II) Loader magic: 0x7fc0b875bd40
[ 29.329] (II) Module ABI versions:
[ 29.329] X.Org ANSI C Emulation: 0.4
[ 29.329] X.Org Video Driver: 15.0
[ 29.329] X.Org XInput driver : 20.0
[ 29.329] X.Org Server Extension : 8.0
[ 29.330] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 29.332] (--) PCI:*(0:0:2:0) 8086:0116:17aa:397d rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 29.345] Initializing built-in extension Generic Event Extension
[ 29.345] Initializing built-in extension SHAPE
[ 29.345] Initializing built-in extension MIT-SHM
[ 29.345] Initializing built-in extension XInputExtension
[ 29.345] Initializing built-in extension XTEST
[ 29.345] Initializing built-in extension BIG-REQUESTS
[ 29.345] Initializing built-in extension SYNC
[ 29.345] Initializing built-in extension XKEYBOARD
[ 29.345] Initializing built-in extension XC-MISC
[ 29.345] Initializing built-in extension SECURITY
[ 29.345] Initializing built-in extension XINERAMA
[ 29.345] Initializing built-in extension XFIXES
[ 29.345] Initializing built-in extension RENDER
[ 29.345] Initializing built-in extension RANDR
[ 29.345] Initializing built-in extension COMPOSITE
[ 29.345] Initializing built-in extension DAMAGE
[ 29.345] Initializing built-in extension MIT-SCREEN-SAVER
[ 29.345] Initializing built-in extension DOUBLE-BUFFER
[ 29.345] Initializing built-in extension RECORD
[ 29.345] Initializing built-in extension DPMS
[ 29.345] Initializing built-in extension Present
[ 29.345] Initializing built-in extension DRI3
[ 29.345] Initializing built-in extension X-Resource
[ 29.345] Initializing built-in extension XVideo
[ 29.345] Initializing built-in extension XVideo-MotionCompensation
[ 29.345] Initializing built-in extension SELinux
[ 29.345] Initializing built-in extension XFree86-VidModeExtension
[ 29.345] Initializing built-in extension XFree86-DGA
[ 29.345] Initializing built-in extension XFree86-DRI
[ 29.345] Initializing built-in extension DRI2
[ 29.345] (II) LoadModule: "glx"
[ 29.372] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.434] (II) Module glx: vendor="X.Org Foundation"
[ 29.434] compiled for 1.15.1, module version = 1.0.0
[ 29.434] ABI class: X.Org Server Extension, version 8.0
[ 29.434] (==) AIGLX enabled
[ 29.434] Loading extension GLX
[ 29.434] (==) Matched intel as autoconfigured driver 0
[ 29.434] (==) Matched intel as autoconfigured driver 1
[ 29.434] (==) Matched modesetting as autoconfigured driver 2
[ 29.434] (==) Matched fbdev as autoconfigured driver 3
[ 29.434] (==) Matched vesa as autoconfigured driver 4
[ 29.434] (==) Assigned the driver to the xf86ConfigLayout
[ 29.434] (II) LoadModule: "intel"
[ 29.448] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.509] (II) Module intel: vendor="X.Org Foundation"
[ 29.509] compiled for 1.15.0, module version = 2.21.15
[ 29.509] Module class: X.Org Video Driver
[ 29.509] ABI class: X.Org Video Driver, version 15.0
[ 29.509] (II) LoadModule: "modesetting"
[ 29.509] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 29.514] (II) Module modesetting: vendor="X.Org Foundation"
[ 29.514] compiled for 1.15.0, module version = 0.8.1
[ 29.514] Module class: X.Org Video Driver
[ 29.514] ABI class: X.Org Video Driver, version 15.0
[ 29.514] (II) LoadModule: "fbdev"
[ 29.514] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 29.525] (II) Module fbdev: vendor="X.Org Foundation"
[ 29.526] compiled for 1.15.0, module version = 0.4.4
[ 29.526] Module class: X.Org Video Driver
[ 29.526] ABI class: X.Org Video Driver, version 15.0
[ 29.526] (II) LoadModule: "vesa"
[ 29.526] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 29.562] (II) Module vesa: vendor="X.Org Foundation"
[ 29.562] compiled for 1.15.0, module version = 2.3.3
[ 29.562] Module class: X.Org Video Driver
[ 29.562] ABI class: X.Org Video Driver, version 15.0
[ 29.562] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 29.563] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 29.563] (II) FBDEV: driver for framebuffer: fbdev
[ 29.563] (II) VESA: driver for VESA chipsets: vesa
[ 29.563] (++) using VT number 7
[ 29.583] (WW) Falling back to old probe method for modesetting
[ 29.584] (WW) Falling back to old probe method for fbdev
[ 29.584] (II) Loading sub module "fbdevhw"
[ 29.584] (II) LoadModule: "fbdevhw"
[ 29.584] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 29.608] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 29.608] compiled for 1.15.1, module version = 0.0.2
[ 29.608] ABI class: X.Org Video Driver, version 15.0
[ 29.608] (WW) Falling back to old probe method for vesa
[ 29.608] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.608] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 29.608] (==) intel(0): RGB weight 888
[ 29.608] (==) intel(0): Default visual is TrueColor
[ 29.608] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 29.608] (**) intel(0): Relaxed fencing enabled
[ 29.608] (**) intel(0): Wait on SwapBuffers? enabled
[ 29.608] (**) intel(0): Triple buffering? enabled
[ 29.608] (**) intel(0): Framebuffer tiled
[ 29.608] (**) intel(0): Pixmaps tiled
[ 29.608] (**) intel(0): 3D buffers tiled
[ 29.608] (**) intel(0): SwapBuffers wait enabled
[ 29.608] (==) intel(0): video overlay key set to 0x101fe
[ 29.608] (II) intel(0): Output LVDS1 has no monitor section
[ 29.609] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 29.610] (II) intel(0): Output VGA1 has no monitor section
[ 29.610] (II) intel(0): Output HDMI1 has no monitor section
[ 29.610] (II) intel(0): Output DP1 has no monitor section
[ 29.610] (II) intel(0): EDID for output LVDS1
[ 29.610] (II) intel(0): Manufacturer: SEC Model: 4252 Serial#: 0
[ 29.610] (II) intel(0): Year: 2010 Week: 0
[ 29.610] (II) intel(0): EDID Version: 1.3
[ 29.610] (II) intel(0): Digital Display Input
[ 29.610] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 29.610] (II) intel(0): Gamma: 2.20
[ 29.610] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 29.610] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 29.610] (II) intel(0): First detailed timing is preferred mode
[ 29.610] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 29.610] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 29.610] (II) intel(0): Manufacturer's mask: 0
[ 29.610] (II) intel(0): Supported detailed timing:
[ 29.610] (II) intel(0): clock: 74.8 MHz Image Size: 344 x 194 mm
[ 29.610] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1578 h_border: 0
[ 29.611] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 29.611] (II) intel(0): Unknown vendor-specific block f
[ 29.611] (II) intel(0): SAMSUNG
[ 29.611] (II) intel(0): LTN156AT24L01
[ 29.611] (II) intel(0): EDID (in hex):
[ 29.611] (II) intel(0): 00ffffffffffff004ca3524200000000
[ 29.611] (II) intel(0): 0014010380221378eac8959e57549226
[ 29.611] (II) intel(0): 0f505400000001010101010101010101
[ 29.611] (II) intel(0): 010101010101381d56d4500016303020
[ 29.611] (II) intel(0): 250058c2100000190000000f00000000
[ 29.611] (II) intel(0): 000000000025d9066a00000000fe0053
[ 29.611] (II) intel(0): 414d53554e470a204ca34154000000fe
[ 29.611] (II) intel(0): 004c544e313536415432344c303100ef
[ 29.611] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 29.611] (II) intel(0): Printing probed modes for output LVDS1
[ 29.611] (II) intel(0): Modeline "1366x768"x60.0 74.80 1366 1414 1446 1578 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 29.611] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 29.611] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 29.611] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 29.611] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 29.611] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 29.611] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 29.612] (II) intel(0): EDID for output VGA1
[ 29.613] (II) intel(0): EDID for output HDMI1
[ 29.613] (II) intel(0): EDID for output DP1
[ 29.613] (II) intel(0): Output LVDS1 connected
[ 29.613] (II) intel(0): Output VGA1 disconnected
[ 29.613] (II) intel(0): Output HDMI1 disconnected
[ 29.613] (II) intel(0): Output DP1 disconnected
[ 29.613] (II) intel(0): Using exact sizes for initial modes
[ 29.613] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 29.613] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.613] (II) intel(0): Kernel page flipping support detected, enabling
[ 29.613] (==) intel(0): DPI set to (96, 96)
[ 29.613] (II) Loading sub module "fb"
[ 29.613] (II) LoadModule: "fb"
[ 29.613] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.653] (II) Module fb: vendor="X.Org Foundation"
[ 29.653] compiled for 1.15.1, module version = 1.0.0
[ 29.653] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.653] (II) Loading sub module "dri2"
[ 29.653] (II) LoadModule: "dri2"
[ 29.653] (II) Module "dri2" already built-in
[ 29.653] (II) UnloadModule: "modesetting"
[ 29.653] (II) Unloading modesetting
[ 29.653] (II) UnloadModule: "fbdev"
[ 29.653] (II) Unloading fbdev
[ 29.653] (II) UnloadSubModule: "fbdevhw"
[ 29.653] (II) Unloading fbdevhw
[ 29.654] (II) UnloadModule: "vesa"
[ 29.654] (II) Unloading vesa
[ 29.654] (==) Depth 24 pixmap format is 32 bpp
[ 29.677] (II) intel(0): [DRI2] Setup complete
[ 29.678] (II) intel(0): [DRI2] DRI driver: i965
[ 29.678] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 29.696] (II) UXA(0): Driver registered support for the following operations:
[ 29.696] (II) solid
[ 29.696] (II) copy
[ 29.696] (II) composite (RENDER acceleration)
[ 29.696] (II) put_image
[ 29.696] (II) get_image
[ 29.696] (==) intel(0): Backing store enabled
[ 29.696] (==) intel(0): Silken mouse enabled
[ 29.700] (II) intel(0): Initializing HW Cursor
[ 29.700] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.707] (==) intel(0): DPMS enabled
[ 29.707] (==) intel(0): Intel XvMC decoder enabled
[ 29.707] (II) intel(0): Set up textured video
[ 29.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 29.707] (II) intel(0): direct rendering: DRI2 Enabled
[ 29.708] (==) intel(0): hotplug detection: "enabled"
[ 29.728] (--) RandR disabled
[ 29.762] (II) SELinux: Disabled on system
[ 30.126] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.126] (II) AIGLX: enabled GLX_ARB_create_context
[ 30.126] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 30.126] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 30.126] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.126] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.126] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 30.126] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 30.126] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.126] (II) AIGLX: Loaded and initialized i965
[ 30.126] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.127] (II) intel(0): Setting screen physical size to 361 x 203
[ 30.390] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 30.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.390] (II) LoadModule: "evdev"
[ 30.391] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.408] (II) Module evdev: vendor="X.Org Foundation"
[ 30.408] compiled for 1.15.0, module version = 2.8.2
[ 30.408] Module class: X.Org XInput Driver
[ 30.408] ABI class: X.Org XInput driver, version 20.0
[ 30.408] (II) Using input driver 'evdev' for 'Power Button'
[ 30.408] (**) Power Button: always reports core events
[ 30.408] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 30.408] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.408] (--) evdev: Power Button: Found keys
[ 30.408] (II) evdev: Power Button: Configuring as keyboard
[ 30.409] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[ 30.409] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.409] (**) Option "xkb_rules" "evdev"
[ 30.409] (**) Option "xkb_model" "pc105"
[ 30.409] (**) Option "xkb_layout" "pl"
[ 30.439] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 30.439] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.439] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.439] (**) Video Bus: always reports core events
[ 30.439] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 30.439] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.439] (--) evdev: Video Bus: Found keys
[ 30.439] (II) evdev: Video Bus: Configuring as keyboard
[ 30.439] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event14"
[ 30.439] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.439] (**) Option "xkb_rules" "evdev"
[ 30.439] (**) Option "xkb_model" "pc105"
[ 30.439] (**) Option "xkb_layout" "pl"
[ 30.439] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 30.439] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.439] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.439] (**) Video Bus: always reports core events
[ 30.439] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 30.439] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.439] (--) evdev: Video Bus: Found keys
[ 30.439] (II) evdev: Video Bus: Configuring as keyboard
[ 30.439] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input14/event13"
[ 30.439] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 30.439] (**) Option "xkb_rules" "evdev"
[ 30.439] (**) Option "xkb_model" "pc105"
[ 30.440] (**) Option "xkb_layout" "pl"
[ 30.440] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 30.440] (II) No input driver specified, ignoring this device.
[ 30.440] (II) This device may have been added with another device file.
[ 30.440] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 30.440] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.440] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.440] (**) Sleep Button: always reports core events
[ 30.440] (**) evdev: Sleep Button: Device: "/dev/input/event6"
[ 30.440] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 30.440] (--) evdev: Sleep Button: Found keys
[ 30.440] (II) evdev: Sleep Button: Configuring as keyboard
[ 30.440] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7/event6"
[ 30.441] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 30.441] (**) Option "xkb_rules" "evdev"
[ 30.441] (**) Option "xkb_model" "pc105"
[ 30.441] (**) Option "xkb_layout" "pl"
[ 30.441] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 30.441] (II) config/udev: Adding input device 2.4GRF Mouse (/dev/input/event1)
[ 30.441] (**) 2.4GRF Mouse: Applying InputClass "evdev pointer catchall"
[ 30.441] (II) Using input driver 'evdev' for '2.4GRF Mouse'
[ 30.441] (**) 2.4GRF Mouse: always reports core events
[ 30.441] (**) evdev: 2.4GRF Mouse: Device: "/dev/input/event1"
[ 30.441] (--) evdev: 2.4GRF Mouse: Vendor 0x4f3 Product 0xa3
[ 30.441] (--) evdev: 2.4GRF Mouse: Found 9 mouse buttons
[ 30.441] (--) evdev: 2.4GRF Mouse: Found scroll wheel(s)
[ 30.441] (--) evdev: 2.4GRF Mouse: Found relative axes
[ 30.442] (--) evdev: 2.4GRF Mouse: Found x and y relative axes
[ 30.442] (II) evdev: 2.4GRF Mouse: Configuring as mouse
[ 30.442] (II) evdev: 2.4GRF Mouse: Adding scrollwheel support
[ 30.442] (**) evdev: 2.4GRF Mouse: YAxisMapping: buttons 4 and 5
[ 30.442] (**) evdev: 2.4GRF Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.442] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2/event1"
[ 30.442] (II) XINPUT: Adding extended input device "2.4GRF Mouse" (type: MOUSE, id 10)
[ 30.442] (II) evdev: 2.4GRF Mouse: initialized for relative axes.
[ 30.442] (**) 2.4GRF Mouse: (accel) keeping acceleration scheme 1
[ 30.442] (**) 2.4GRF Mouse: (accel) acceleration profile 0
[ 30.442] (**) 2.4GRF Mouse: (accel) acceleration factor: 2.000
[ 30.442] (**) 2.4GRF Mouse: (accel) acceleration threshold: 4
[ 30.442] (II) config/udev: Adding input device 2.4GRF Mouse (/dev/input/mouse0)
[ 30.442] (II) No input driver specified, ignoring this device.
[ 30.442] (II) This device may have been added with another device file.
[ 30.443] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event11)
[ 30.443] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 30.443] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 30.443] (**) Lenovo EasyCamera: always reports core events
[ 30.443] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event11"
[ 30.443] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x364
[ 30.443] (--) evdev: Lenovo EasyCamera: Found keys
[ 30.443] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 30.443] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input13/event11"
[ 30.443] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[ 30.443] (**) Option "xkb_rules" "evdev"
[ 30.443] (**) Option "xkb_model" "pc105"
[ 30.443] (**) Option "xkb_layout" "pl"
[ 30.443] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event4)
[ 30.443] (II) No input driver specified, ignoring this device.
[ 30.443] (II) This device may have been added with another device file.
[ 30.444] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event3)
[ 30.444] (II) No input driver specified, ignoring this device.
[ 30.444] (II) This device may have been added with another device file.
[ 30.444] (II) config/udev: Adding input device HDA Intel PCH HDMI (/dev/input/event2)
[ 30.444] (II) No input driver specified, ignoring this device.
[ 30.444] (II) This device may have been added with another device file.
[ 30.444] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event9)
[ 30.444] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.444] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 30.444] (**) Ideapad extra buttons: always reports core events
[ 30.444] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event9"
[ 30.444] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 30.444] (--) evdev: Ideapad extra buttons: Found keys
[ 30.444] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 30.444] (**) Option "config_info" "udev:/sys/devices/platform/VPC2004:00/input/input11/event9"
[ 30.444] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[ 30.444] (**) Option "xkb_rules" "evdev"
[ 30.444] (**) Option "xkb_model" "pc105"
[ 30.444] (**) Option "xkb_layout" "pl"
[ 30.445] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.445] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.445] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.445] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.445] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.445] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.445] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.445] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.445] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.445] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 30.445] (**) Option "xkb_rules" "evdev"
[ 30.445] (**) Option "xkb_model" "pc105"
[ 30.445] (**) Option "xkb_layout" "pl"
[ 30.445] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[ 30.445] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.445] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 30.445] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 30.446] (II) LoadModule: "synaptics"
[ 30.446] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.459] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.459] compiled for 1.15.0, module version = 1.7.3
[ 30.459] Module class: X.Org XInput Driver
[ 30.459] ABI class: X.Org XInput driver, version 20.0
[ 30.459] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 30.459] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.459] (**) Option "Device" "/dev/input/event12"
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2934 (res 0)
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1304 (res 0)
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 30.620] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.676] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event12"
[ 30.676] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 30.676] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.676] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 30.676] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.062
[ 30.677] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 30.677] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 30.677] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 30.677] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 30.677] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 30.677] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 30.677] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 30.678] (II) No input driver specified, ignoring this device.
[ 30.678] (II) This device may have been added with another device file.
[ 30.678] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event10)
[ 30.678] (II) No input driver specified, ignoring this device.
[ 30.678] (II) This device may have been added with another device file.
[ 30.679] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 30.679] (II) No input driver specified, ignoring this device.
[ 30.679] (II) This device may have been added with another device file.
[ 42.279] (II) intel(0): EDID vendor "SEC", prod id 16978
[ 42.279] (II) intel(0): Printing DDC gathered Modelines:
[ 42.279] (II) intel(0): Modeline "1366x768"x0.0 74.80 1366 1414 1446 1578 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 42.281] (II) intel(0): EDID vendor "SEC", prod id 16978
[ 42.281] (II) intel(0): Printing DDC gathered Modelines:
[ 42.281] (II) intel(0): Modeline "1366x768"x0.0 74.80 1366 1414 1446 1578 768 770 775 790 -hsync -vsync (47.4 kHz eP)
No to zadziałało polecenie. Z początku miałem error, ale później mała edycja konfiga zgodnie z instrukcją i zadziałało
Sprawdź jeszcze ten log i fajnie by było, żebyś nakreślił dokładniej czego tam szukasz, a ja wtedy powalczy z zarządzaniem mocą.
FPS się nie różnią, ale na początku jest komunikat na jakiej karcie pracuje. Co do bbswitch, nie do końca rozumiem jego działania. Z tego co udało mi się wyczytać, to można w nim ustawić na jakiej karcie ma pracować system przez cały czas. Do tego można ustawić, że przy ładowaniu systemu ma się odpalić od razu na nvidii, bądź nie. Tak samo przy zamykaniu. Ale jaki to ma sens. Raczej miałem nadzieję, że tu będzie chodziło i jakieś ustawienie wydajności. Że ma pracować optymalnie, albo na wysokich obrotach.
Kwestia jeszcze dźwięku... Czy można dodać jakiś suwak w rogu do dźwięku, aby regulować głośność ?
Kwestia jeszcze dźwięku... Czy można dodać jakiś suwak w rogu do dźwięku, aby regulować głośność ?