Mam problem z modemem Huawei E3276.
Po włożeniu do usb jest wykrywany i mogę go skonfigurować. Ale kiedy chcę się połączyć, to po kilkunastu sekundach wyskakuje komunikat, że połączenie się nie powiodło.
Modem jest z sieci Plus. Na netbooku mam Debiana Gnome.
Jak można rozwiązać ten problem?
Huawei E3276 nie
-
marcin1982
- Moderator
- Posty: 1731
- Rejestracja: 05 maja 2011, 12:59
- Lokalizacja: Zagłębie Dąbrowskie
Czasami warto skorzystać z forumowej wyszukiwarki:
threads/30730-Huawei-E3276-internet-LTE ... post168425 .
threads/30730-Huawei-E3276-internet-LTE ... post168425 .
Wiem,że warto, Marcinie. Ten sposób jednak u mnie nie zadziałał. Gdyby ktoś mógł mi podpowiedzieć jak uruchomić ten modem, to byłbym wdzięczny.marcin1982 pisze:Czasami warto skorzystać z forumowej wyszukiwarki:
threads/30730-Huawei-E3276-internet-LTE ... post168425 .
ATZ - nie znaleziono polecenia
AT^SETPORT="A1,A2;1,2,3" - nie znaleziono polecenia
lsusb
dmesg$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0ac8:c33f Z-Star Microelectronics Corp. Webcam
Bus 004 Device 002: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device
Bus 001 Device 005: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard
Kod: Zaznacz cały
[ 0.210007] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.210143] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.210281] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.210416] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.210658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210658] vgaarb: loaded
[ 0.210658] vgaarb: bridge control possible 0000:00:02.0
[ 0.210658] PCI: Using ACPI for IRQ routing
[ 0.210658] PCI: pci_cache_line_size set to 64 bytes
[ 0.210658] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.210658] reserve RAM buffer: 000000003f5b0000 - 000000003fffffff
[ 0.210658] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.210658] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.210658] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.216187] Switching to clocksource hpet
[ 0.219816] pnp: PnP ACPI init
[ 0.219856] ACPI: bus type pnp registered
[ 0.221480] pnp 00:00: [bus 00-3f]
[ 0.221488] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.221494] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.221501] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.221507] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.221513] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.221519] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.221525] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.221531] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.221538] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.221544] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.221550] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.221556] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.221562] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.221568] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.221575] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.221581] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.221587] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.221593] pnp 00:00: [io 0x0d00-0xfdff window]
[ 0.221599] pnp 00:00: [mem 0x00000000 window]
[ 0.221605] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.221737] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.222391] pnp 00:01: [io 0x0010-0x001f]
[ 0.222398] pnp 00:01: [io 0x0024-0x0025]
[ 0.222404] pnp 00:01: [io 0x0028-0x0029]
[ 0.222409] pnp 00:01: [io 0x002c-0x002d]
[ 0.222414] pnp 00:01: [io 0x0030-0x0031]
[ 0.222420] pnp 00:01: [io 0x0034-0x0035]
[ 0.222425] pnp 00:01: [io 0x0038-0x0039]
[ 0.222431] pnp 00:01: [io 0x003c-0x003d]
[ 0.222436] pnp 00:01: [io 0x0072-0x0077]
[ 0.222441] pnp 00:01: [io 0x0080]
[ 0.222446] pnp 00:01: [io 0x0090-0x009f]
[ 0.222452] pnp 00:01: [io 0x00a4-0x00a5]
[ 0.222457] pnp 00:01: [io 0x00a8-0x00a9]
[ 0.222463] pnp 00:01: [io 0x00ac-0x00ad]
[ 0.222468] pnp 00:01: [io 0x00b0-0x00b5]
[ 0.222473] pnp 00:01: [io 0x00b8-0x00b9]
[ 0.222479] pnp 00:01: [io 0x00bc-0x00bd]
[ 0.222484] pnp 00:01: [io 0x0800-0x080f]
[ 0.222490] pnp 00:01: [io 0x1000-0x107f]
[ 0.222495] pnp 00:01: [io 0x1180-0x11bf]
[ 0.222501] pnp 00:01: [io 0x002e-0x002f]
[ 0.222506] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.222511] pnp 00:01: [io 0xfe00]
[ 0.222517] pnp 00:01: [io 0x164e-0x174c]
[ 0.222523] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.222528] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.222534] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.222540] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[ 0.222709] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.222718] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.222725] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.222732] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.222739] system 00:01: [io 0xfe00] has been reserved
[ 0.222746] system 00:01: [io 0x164e-0x174c] has been reserved
[ 0.222758] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.222765] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.222773] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.222780] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.222789] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.222818] pnp 00:02: [io 0x0000-0x000f]
[ 0.222824] pnp 00:02: [io 0x0081-0x008f]
[ 0.222830] pnp 00:02: [io 0x00c0-0x00df]
[ 0.222836] pnp 00:02: [dma 4]
[ 0.222910] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.222937] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.222955] pnp 00:03: [irq 13]
[ 0.223029] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.223113] pnp 00:04: [io 0x0070-0x0071]
[ 0.223126] pnp 00:04: [irq 8]
[ 0.223206] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.223233] pnp 00:05: [io 0x0061]
[ 0.223308] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.223374] pnp 00:06: [io 0x0060]
[ 0.223380] pnp 00:06: [io 0x0064]
[ 0.223392] pnp 00:06: [irq 1]
[ 0.223473] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.223506] pnp 00:07: [irq 12]
[ 0.223584] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.223889] pnp 00:08: [mem 0xff800000-0xffffffff]
[ 0.223975] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.224459] pnp: PnP ACPI: found 9 devices
[ 0.224464] ACPI: ACPI bus type pnp unregistered
[ 0.224472] PnPBIOS: Disabled by ACPI PNP
[ 0.265816] PCI: max bus depth: 1 pci_try_num: 2
[ 0.265914] pci 0000:00:1c.3: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.265926] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.265939] pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.265950] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.265961] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40600000-0x407fffff]
[ 0.265972] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.265983] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.265994] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.266005] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.266013] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[ 0.266020] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.266030] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.266040] pci 0000:00:1c.0: bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.266053] pci 0000:00:1c.1: PCI bridge to [bus 07-07]
[ 0.266060] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.266070] pci 0000:00:1c.1: bridge window [mem 0x40600000-0x407fffff]
[ 0.266080] pci 0000:00:1c.1: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.266093] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
[ 0.266100] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.266110] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.266119] pci 0000:00:1c.2: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.266132] pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
[ 0.266139] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.266149] pci 0000:00:1c.3: bridge window [mem 0x40000000-0x401fffff]
[ 0.266159] pci 0000:00:1c.3: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.266172] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
[ 0.266226] pci 0000:00:1c.0: setting latency timer to 64
[ 0.266239] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.266263] pci 0000:00:1c.1: setting latency timer to 64
[ 0.266290] pci 0000:00:1c.2: setting latency timer to 64
[ 0.266302] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.266325] pci 0000:00:1c.3: setting latency timer to 64
[ 0.266340] pci 0000:00:1e.0: setting latency timer to 64
[ 0.266349] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.266355] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.266362] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.266368] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.266374] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.266381] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.266387] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.266393] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.266400] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 0.266406] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.266413] pci_bus 0000:05: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.266419] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.266426] pci_bus 0000:07: resource 1 [mem 0x40600000-0x407fffff]
[ 0.266432] pci_bus 0000:07: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.266439] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.266445] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.266451] pci_bus 0000:09: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.266458] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff]
[ 0.266464] pci_bus 0000:0b: resource 1 [mem 0x40000000-0x401fffff]
[ 0.266471] pci_bus 0000:0b: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.266478] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.266484] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.266490] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.266497] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.266503] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.266509] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.266516] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.266522] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.266653] NET: Registered protocol family 2
[ 0.272718] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.273259] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.274183] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.274611] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.274617] TCP reno registered
[ 0.274626] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.274645] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.274889] NET: Registered protocol family 1
[ 0.274926] pci 0000:00:02.0: Boot video device
[ 0.275232] PCI: CLS 32 bytes, default 64
[ 0.275358] Unpacking initramfs...
[ 0.766324] Freeing initrd memory: 9916k freed
[ 0.773864] Simple Boot Flag at 0x36 set to 0x1
[ 0.774838] audit: initializing netlink socket (disabled)
[ 0.774862] type=2000 audit(1416738258.768:1): initialized
[ 0.802892] highmem bounce pool size: 64 pages
[ 0.802904] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.803636] VFS: Disk quotas dquot_6.5.2
[ 0.803704] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.803846] msgmni has been set to 1751
[ 0.804288] alg: No test for stdrng (krng)
[ 0.804366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.804373] io scheduler noop registered
[ 0.804378] io scheduler deadline registered
[ 0.804413] io scheduler cfq registered (default)
[ 0.804597] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.804677] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.804817] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.804887] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.805014] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.805083] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.805210] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.805279] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.805465] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.805516] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.805521] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.806267] intel_idle: MWAIT substates: 0x20220
[ 0.806285] intel_idle: v0.4 model 0x1C
[ 0.806290] intel_idle: lapic_timer_reliable_states 0x2
[ 0.806296] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.806366] ERST: Table is not found!
[ 0.806370] GHES: HEST is not enabled!
[ 0.806404] isapnp: Scanning for PnP cards...
[ 1.160184] isapnp: No Plug & Play device found
[ 1.160352] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.164721] Linux agpgart interface v0.103
[ 1.164955] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.165079] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.165248] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.165497] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.165847] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.220963] i8042: Detected active multiplexing controller, rev 1.1
[ 1.243930] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.243946] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.244054] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.244139] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.244210] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.244541] mousedev: PS/2 mouse device common for all mice
[ 1.246057] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.246101] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.246223] cpuidle: using governor ladder
[ 1.246358] cpuidle: using governor menu
[ 1.246888] TCP cubic registered
[ 1.247015] NET: Registered protocol family 10
[ 1.248287] Mobile IPv6
[ 1.248295] NET: Registered protocol family 17
[ 1.248306] Registering the dns_resolver key type
[ 1.248348] Using IPI No-Shortcut mode
[ 1.248702] PM: Hibernation image not present or could not be loaded.
[ 1.248730] registered taskstats version 1
[ 1.249571] rtc_cmos 00:04: setting system clock to 2014-11-23 10:24:20 UTC (1416738260)
[ 1.249705] Initializing network drop monitor service
[ 1.249957] Freeing unused kernel memory: 420k freed
[ 1.250288] Write protecting the kernel text: 2860k
[ 1.250369] Write protecting the kernel read-only data: 1084k
[ 1.250375] NX-protecting the kernel data: 3284k
[ 1.278409] udevd[49]: starting version 175
[ 1.306086] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.375759] sky2: driver version 1.30
[ 1.376043] sky2 0000:09:00.0: setting latency timer to 64
[ 1.396411] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 1.397026] sky2 0000:09:00.0: irq 44 for MSI/MSI-X
[ 1.432092] sky2 0000:09:00.0: eth0: addr 00:24:54:44:c4:f4
[ 1.436849] usbcore: registered new interface driver usbfs
[ 1.436913] usbcore: registered new interface driver hub
[ 1.438529] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.438538] ACPI: Thermal Zone [TZ00] (18 C)
[ 1.450554] usbcore: registered new device driver usb
[ 1.451926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.452074] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.452086] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.452158] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.452213] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.452237] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.456133] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.477069] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.477197] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
[ 1.496063] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.496137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.496147] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.496156] usb usb1: Product: EHCI Host Controller
[ 1.496163] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 1.496170] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.496588] hub 1-0:1.0: USB hub found
[ 1.496605] hub 1-0:1.0: 8 ports detected
[ 1.497797] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.497811] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.497846] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.497902] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.498019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.498028] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.498037] usb usb2: Product: UHCI Host Controller
[ 1.498044] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.498051] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.498491] hub 2-0:1.0: USB hub found
[ 1.498510] hub 2-0:1.0: 2 ports detected
[ 1.498775] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.498787] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.498819] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.498908] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.499017] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.499026] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.499034] usb usb3: Product: UHCI Host Controller
[ 1.499040] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.499047] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.499465] hub 3-0:1.0: USB hub found
[ 1.499482] hub 3-0:1.0: 2 ports detected
[ 1.499741] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.499753] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.499782] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.499874] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.499986] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.499996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.500041] usb usb4: Product: UHCI Host Controller
[ 1.500048] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.500055] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.501090] hub 4-0:1.0: USB hub found
[ 1.501109] hub 4-0:1.0: 2 ports detected
[ 1.501377] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.501389] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.501427] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.501517] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.501629] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.501638] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.501646] usb usb5: Product: UHCI Host Controller
[ 1.501653] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.501660] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.502083] hub 5-0:1.0: USB hub found
[ 1.502100] hub 5-0:1.0: 2 ports detected
[ 1.526916] SCSI subsystem initialized
[ 1.548584] libata version 3.00 loaded.
[ 1.551083] ahci 0000:00:1f.2: version 3.0
[ 1.551217] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.551380] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.551392] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.551406] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.555262] scsi0 : ahci
[ 1.555651] scsi1 : ahci
[ 1.555935] scsi2 : ahci
[ 1.556327] scsi3 : ahci
[ 1.556828] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 45
[ 1.556841] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 45
[ 1.556852] ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600 irq 45
[ 1.556863] ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680 irq 45
[ 1.876151] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.876196] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.876236] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.876274] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.882326] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-06, max UDMA7
[ 1.882341] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.888542] ata1.00: configured for UDMA/133
[ 1.888810] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5
[ 1.900853] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.901076] sd 0:0:0:0: [sda] Write Protect is off
[ 1.901086] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.901183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.920105] usb 1-8: new high-speed USB device number 3 using ehci_hcd
[ 1.939228] sda: sda1 sda2 sda3
[ 1.940384] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.944474] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.071272] usb 1-8: New USB device found, idVendor=0ac8, idProduct=c33f
[ 2.071285] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.071294] usb 1-8: Product: WebCam SCB-0340N
[ 2.071302] usb 1-8: Manufacturer: Namuga.
[ 2.312070] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.485988] usb 4-2: New USB device found, idVendor=0a5c, idProduct=219b
[ 2.486004] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.486011] usb 4-2: Product: Broadcom Bluetooth 2.1 Device
[ 2.486016] usb 4-2: Manufacturer: Broadcom Corp
[ 2.486021] usb 4-2: SerialNumber: 0026B6B28DB2
[ 2.538171] PM: Starting manual resume from disk
[ 2.538180] PM: Hibernation image partition 8:2 present
[ 2.538184] PM: Looking for hibernation image.
[ 2.538549] PM: Image not found (code -22)
[ 2.538554] PM: Hibernation image not present or could not be loaded.
[ 2.599269] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.283050] udevd[335]: starting version 175
[ 5.183461] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 5.183551] ACPI: Lid Switch [LID0]
[ 5.183776] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.183793] ACPI: Power Button [PWRB]
[ 5.184082] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 5.184098] ACPI: Sleep Button [SLPB]
[ 5.184316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.184330] ACPI: Power Button [PWRF]
[ 5.229488] ACPI: Requesting acpi_cpufreq
[ 5.353438] iTCO_vendor_support: vendor-support=0
[ 5.355247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.355506] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
[ 5.355666] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.425615] samsung_laptop: Backlight controlled by ACPI video driver
[ 5.472809] cfg80211: Calling CRDA to update world regulatory domain
[ 5.482756] ACPI: AC Adapter [ADP1] (on-line)
[ 5.489918] ACPI: Battery Slot [BAT1] (battery present)
[ 5.586506] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.829742] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5.829823] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.936554] [drm] Initialized drm 1.1.0 20060810
[ 6.027290] ath9k 0000:05:00.0: setting latency timer to 64
[ 6.078924] ath: EEPROM regdomain: 0x65
[ 6.078932] ath: EEPROM indicates we should expect a direct regpair map
[ 6.078942] ath: Country alpha2 being used: 00
[ 6.078947] ath: Regpair used: 0x65
[ 6.117116] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.118673] Registered led device: ath9k-phy0
[ 6.118690] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8600000, irq=16
[ 6.279427] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 6.279742] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 6.281473] i915 0000:00:02.0: setting latency timer to 64
[ 6.336816] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 6.336844] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.336851] [drm] Driver supports precise vblank timestamp query.
[ 6.336955] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem :o wns=io+mem
[ 6.693839] [drm] initialized overlay support
[ 6.713649] fbcon: inteldrmfb (fb0) is primary device
[ 6.812445] cfg80211: World regulatory domain updated:
[ 6.812452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.812459] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 6.812464] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 6.812469] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 6.812475] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[ 6.812480] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[ 6.812485] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[ 6.812490] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 6.812496] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 7.016170] Bluetooth: Core ver 2.16
[ 7.016238] NET: Registered protocol family 31
[ 7.016244] Bluetooth: HCI device and connection manager initialized
[ 7.016251] Bluetooth: HCI socket layer initialized
[ 7.016257] Bluetooth: L2CAP socket layer initialized
[ 7.016489] Bluetooth: SCO socket layer initialized
[ 7.043657] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.044818] usbcore: registered new interface driver btusb
[ 7.164536] Console: switching to colour frame buffer device 128x37
[ 7.172192] fb0: inteldrmfb frame buffer device
[ 7.172196] drm: registered panic notifier
[ 7.173435] ACPI Warning: _BQC returned an invalid level (20110623/video-518)
[ 7.174076] acpi device:03: registered as cooling_device2
[ 7.174432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 7.174590] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 7.174667] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.426391] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 7.544052] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 7.708989] Linux media interface: v0.10
[ 7.722474] Linux video capture interface: v2.00
[ 7.769076] uvcvideo: Found UVC 1.00 device WebCam SCB-0340N (0ac8:c33f)
[ 7.771359] input: WebCam SCB-0340N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
[ 7.771625] usbcore: registered new interface driver uvcvideo
[ 7.771632] USB Video Class driver (1.1.1)
[ 10.130725] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k
[ 10.182546] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.606543] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.772364] loop: module loaded
[ 12.281595] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.728638] RPC: Registered named UNIX socket transport module.
[ 13.728647] RPC: Registered udp transport module.
[ 13.728654] RPC: Registered tcp transport module.
[ 13.728659] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.782375] FS-Cache: Loaded
[ 13.844658] FS-Cache: Netfs 'nfs' registered for caching
[ 13.870185] Installing knfsd (copyright (C) 1996 [EMAIL="[email protected]"][email protected][/EMAIL]).
[ 16.351108] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 17.985721] Bluetooth: RFCOMM TTY layer initialized
[ 17.985738] Bluetooth: RFCOMM socket layer initialized
[ 17.985745] Bluetooth: RFCOMM ver 1.11
[ 18.052228] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.052238] Bluetooth: BNEP filters: protocol multicast
[ 18.377748] lp: driver loaded but no devices found
[ 18.411811] ppdev: user-space parallel port driver
[ 19.502623] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.563696] sky2 0000:09:00.0: eth0: enabling interface
[ 19.564710] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 61.072081] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 61.209166] usb 1-3: New USB device found, idVendor=12d1, idProduct=14fe
[ 61.209179] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 61.209188] usb 1-3: Product: HUAWEI Mobile
[ 61.209196] usb 1-3: Manufacturer: HUAWEI Technology
[ 61.437609] Initializing USB Mass Storage driver...
[ 61.438338] scsi4 : usb-storage 1-3:1.0
[ 61.438869] scsi5 : usb-storage 1-3:1.1
[ 61.439114] usbcore: registered new interface driver usb-storage
[ 61.439122] USB Mass Storage support registered.
[ 62.325110] usb 1-3: USB disconnect, device number 4
[ 62.700080] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[ 62.833797] usb 1-3: New USB device found, idVendor=12d1, idProduct=1506
[ 62.833814] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 62.833822] usb 1-3: Product: HUAWEI Mobile
[ 62.833829] usb 1-3: Manufacturer: HUAWEI Technology
[ 62.856522] scsi6 : usb-storage 1-3:1.2
[ 62.861946] scsi7 : usb-storage 1-3:1.3
[ 63.078179] usbcore: registered new interface driver usbserial
[ 63.078227] USB Serial support registered for generic
[ 63.079055] usbcore: registered new interface driver usbserial_generic
[ 63.079065] usbserial: USB Serial Driver core
[ 63.096565] USB Serial support registered for GSM modem (1-port)
[ 63.097920] option 1-3:1.0: GSM modem (1-port) converter detected
[ 63.098450] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 63.099585] usbcore: registered new interface driver option
[ 63.099594] option: v0.7.2:USB Driver for GSM modems
[ 63.857115] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 63.862725] scsi 6:0:0:0: Attached scsi generic sg1 type 5
[ 63.864448] scsi 7:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 63.867036] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 63.870343] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 63.948579] sr0: scsi-1 drive
[ 63.948591] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 63.949929] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 71.656456] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 71.690626] ISOFS: changing to secondary root
[ 77.993273] PPP generic driver version 2.4.2
A zainstalowałeś screen? I uruchomiłeś przed wywołaniem tych poleceń ?
Kod: Zaznacz cały
screen /dev/ttyUSB0