Po uruchomieniu np laptopa na drugi dzień blokuje mi się pulpit (właściwie to się nie blokuje tylko zawiesza bardziej tu pasuje) po paru sekundach kursorem mogę ruszać ale jak coś klikam czy zamknięcie okna czy menu start to nie ma reakcji. Po wylogowaniu i zalogowaniu zaczyna wszystko działać normalnie.
A i kursor zamienia się w krzyżyk przykleja się do paska tytułu też trzeba się wylogować i zalogować.
Instalowałem parę stylów okien też.
( Miałem jeszcze takie coś że jak wpisywałem tekst to nagle w czasie pisania któraś z liter nagle waliła na maksa czy to w przeglądarce czy w konsoli jak kliknąłem w klawiaturę to się wszystko zatrzymywało, nie opatrzenie wpisałem hasło root w konsoli pomyliłem się dałem clear ale .bash_history wyczyściłem dwa dni później tak przy okazji o tym pisze bo taki szybki byłby ktoś aby zaglądać co tu robię dopiero co zainstalowałem Debiana . Po zmianie hasła i puszczeniu chkrootkit i rkhunter wszystko ustało. )
Proszę stosować interpunkcję.
Kod: Zaznacz cały
cat /var/log/Xorg.0.log > Xorg.0.log.txt
Kod: Zaznacz cały
[ 3006.545] (--) Log file renamed from "/var/log/Xorg.pid-5265.log" to "/var/log/Xorg.0.log"
[ 3006.545]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 3006.545] X Protocol Version 11, Revision 0
[ 3006.545] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[ 3006.545] Current Operating System: Linux link 4.9.0-4-amd64 #1 SMP Debian 4.9.51-1 (2017-09-28) x86_64
[ 3006.546] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=UUID=3f76f9fc-2f4c-4847-ab7c-1d599eaf0bd0 ro quiet
[ 3006.546] Build Date: 16 October 2017 08:19:45AM
[ 3006.546] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support)
[ 3006.546] Current version of pixman: 0.34.0
[ 3006.546] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3006.546] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3006.546] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 27 11:47:19 2017
[ 3006.546] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3006.546] (==) No Layout section. Using the first Screen section.
[ 3006.546] (==) No screen section available. Using defaults.
[ 3006.546] (**) |-->Screen "Default Screen Section" (0)
[ 3006.546] (**) | |-->Monitor "<default monitor>"
[ 3006.547] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3006.547] (==) Automatically adding devices
[ 3006.547] (==) Automatically enabling devices
[ 3006.547] (==) Automatically adding GPU devices
[ 3006.547] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3006.547] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 3006.547] Entry deleted from font path.
[ 3006.547] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 3006.547] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3006.547] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3006.547] (II) Loader magic: 0x55f3ea3cae00
[ 3006.547] (II) Module ABI versions:
[ 3006.547] X.Org ANSI C Emulation: 0.4
[ 3006.547] X.Org Video Driver: 23.0
[ 3006.547] X.Org XInput driver : 24.1
[ 3006.547] X.Org Server Extension : 10.0
[ 3006.548] (++) using VT number 7
[ 3006.548] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3006.549] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3006.558] (--) PCI:*(0:0:2:0) 8086:0116:1028:049b rev 9, Mem @ 0xe1c00000/4194304, 0xd0000000/268435456, I/O @ 0x00007000/64, BIOS @ 0x????????/131072
[ 3006.558] (II) LoadModule: "glx"
[ 3006.558] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3006.560] (II) Module glx: vendor="X.Org Foundation"
[ 3006.560] compiled for 1.19.2, module version = 1.0.0
[ 3006.560] ABI class: X.Org Server Extension, version 10.0
[ 3006.560] (==) Matched modesetting as autoconfigured driver 0
[ 3006.560] (==) Matched fbdev as autoconfigured driver 1
[ 3006.560] (==) Matched vesa as autoconfigured driver 2
[ 3006.560] (==) Assigned the driver to the xf86ConfigLayout
[ 3006.560] (II) LoadModule: "modesetting"
[ 3006.560] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3006.560] (II) Module modesetting: vendor="X.Org Foundation"
[ 3006.560] compiled for 1.19.2, module version = 1.19.2
[ 3006.560] Module class: X.Org Video Driver
[ 3006.560] ABI class: X.Org Video Driver, version 23.0
[ 3006.560] (II) LoadModule: "fbdev"
[ 3006.560] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3006.561] (II) Module fbdev: vendor="X.Org Foundation"
[ 3006.561] compiled for 1.19.0, module version = 0.4.4
[ 3006.561] Module class: X.Org Video Driver
[ 3006.561] ABI class: X.Org Video Driver, version 23.0
[ 3006.561] (II) LoadModule: "vesa"
[ 3006.561] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3006.561] (II) Module vesa: vendor="X.Org Foundation"
[ 3006.561] compiled for 1.19.0, module version = 2.3.4
[ 3006.561] Module class: X.Org Video Driver
[ 3006.561] ABI class: X.Org Video Driver, version 23.0
[ 3006.561] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3006.561] (II) FBDEV: driver for framebuffer: fbdev
[ 3006.561] (II) VESA: driver for VESA chipsets: vesa
[ 3006.589] (II) modeset(0): using drv /dev/dri/card0
[ 3006.589] (WW) Falling back to old probe method for fbdev
[ 3006.589] (II) Loading sub module "fbdevhw"
[ 3006.589] (II) LoadModule: "fbdevhw"
[ 3006.589] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3006.589] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 3006.589] compiled for 1.19.2, module version = 0.0.2
[ 3006.589] ABI class: X.Org Video Driver, version 23.0
[ 3006.589] (WW) Falling back to old probe method for vesa
[ 3006.589] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3006.589] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 3006.590] (==) modeset(0): RGB weight 888
[ 3006.590] (==) modeset(0): Default visual is TrueColor
[ 3006.590] (II) Loading sub module "glamoregl"
[ 3006.590] (II) LoadModule: "glamoregl"
[ 3006.590] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 3006.597] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3006.597] compiled for 1.19.2, module version = 1.0.0
[ 3006.597] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3006.597] (II) glamor: OpenGL accelerated X.org driver based.
[ 3006.624] (II) glamor: EGL version 1.4 (DRI2):
[ 3006.628] (II) modeset(0): glamor initialized
[ 3006.628] (II) modeset(0): Output LVDS-1 has no monitor section
[ 3006.629] (II) modeset(0): Output VGA-1 has no monitor section
[ 3006.630] (II) modeset(0): Output HDMI-1 has no monitor section
[ 3006.630] (II) modeset(0): Output DP-1 has no monitor section
[ 3006.631] (II) modeset(0): Output HDMI-2 has no monitor section
[ 3006.632] (II) modeset(0): Output HDMI-3 has no monitor section
[ 3006.632] (II) modeset(0): Output DP-2 has no monitor section
[ 3006.632] (II) modeset(0): Output DP-3 has no monitor section
[ 3006.632] (II) modeset(0): EDID for output LVDS-1
[ 3006.632] (II) modeset(0): Manufacturer: LGD Model: 2eb Serial#: 0
[ 3006.632] (II) modeset(0): Year: 2010 Week: 0
[ 3006.632] (II) modeset(0): EDID Version: 1.4
[ 3006.632] (II) modeset(0): Digital Display Input
[ 3006.632] (II) modeset(0): 6 bits per channel
[ 3006.632] (II) modeset(0): Digital interface is undefined
[ 3006.632] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 3006.632] (II) modeset(0): Gamma: 2.20
[ 3006.632] (II) modeset(0): No DPMS capabilities specified
[ 3006.632] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3006.632] (II) modeset(0): First detailed timing is preferred mode
[ 3006.632] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 3006.632] (II) modeset(0): redX: 0.592 redY: 0.347 greenX: 0.337 greenY: 0.562
[ 3006.632] (II) modeset(0): blueX: 0.154 blueY: 0.123 whiteX: 0.313 whiteY: 0.329
[ 3006.632] (II) modeset(0): Manufacturer's mask: 0
[ 3006.632] (II) modeset(0): Supported detailed timing:
[ 3006.632] (II) modeset(0): clock: 70.0 MHz Image Size: 309 x 174 mm
[ 3006.632] (II) modeset(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1492 h_border: 0
[ 3006.632] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 782 v_border: 0
[ 3006.632] (II) modeset(0): Supported detailed timing:
[ 3006.632] (II) modeset(0): clock: 48.3 MHz Image Size: 309 x 174 mm
[ 3006.632] (II) modeset(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1524 h_border: 0
[ 3006.632] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 792 v_border: 0
[ 3006.632] (II) modeset(0): KJ262140WH4
[ 3006.632] (II) modeset(0): Unknown vendor-specific block 0
[ 3006.632] (II) modeset(0): EDID (in hex):
[ 3006.632] (II) modeset(0): 00ffffffffffff0030e4eb0200000000
[ 3006.632] (II) modeset(0): 00140104901f11780ab7a59758568f27
[ 3006.632] (II) modeset(0): 1f505400000001010101010101010101
[ 3006.632] (II) modeset(0): 010101010101581b567e50000e302430
[ 3006.632] (II) modeset(0): 350035ae10000019de12569e50001830
[ 3006.632] (II) modeset(0): 2430350035ae10000019000000fe004b
[ 3006.632] (II) modeset(0): 4a323632803134305748340a00000000
[ 3006.632] (II) modeset(0): 00004131940000000001010a20200094
[ 3006.632] (II) modeset(0): Printing probed modes for output LVDS-1
[ 3006.632] (II) modeset(0): Modeline "1366x768"x60.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 3006.632] (II) modeset(0): Modeline "1366x768"x40.0 48.30 1366 1402 1450 1524 768 771 776 792 -hsync -vsync (31.7 kHz e)
[ 3006.632] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 3006.632] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 3006.632] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 3006.632] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3006.632] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 3006.632] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 3006.633] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 3006.633] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 3006.633] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 3006.633] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 3006.633] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3006.633] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3006.633] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 3006.633] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 3006.633] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 3006.633] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 3006.633] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 3006.633] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 3006.633] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 3006.633] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3006.633] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 3006.633] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 3006.633] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 3006.633] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 3006.633] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 3006.633] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 3006.633] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 3006.634] (II) modeset(0): EDID for output VGA-1
[ 3006.635] (II) modeset(0): EDID for output HDMI-1
[ 3006.635] (II) modeset(0): EDID for output DP-1
[ 3006.635] (II) modeset(0): EDID for output HDMI-2
[ 3006.636] (II) modeset(0): EDID for output HDMI-3
[ 3006.636] (II) modeset(0): EDID for output DP-2
[ 3006.636] (II) modeset(0): EDID for output DP-3
[ 3006.636] (II) modeset(0): Output LVDS-1 connected
[ 3006.636] (II) modeset(0): Output VGA-1 disconnected
[ 3006.636] (II) modeset(0): Output HDMI-1 disconnected
[ 3006.636] (II) modeset(0): Output DP-1 disconnected
[ 3006.636] (II) modeset(0): Output HDMI-2 disconnected
[ 3006.636] (II) modeset(0): Output HDMI-3 disconnected
[ 3006.636] (II) modeset(0): Output DP-2 disconnected
[ 3006.636] (II) modeset(0): Output DP-3 disconnected
[ 3006.636] (II) modeset(0): Using exact sizes for initial modes
[ 3006.636] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[ 3006.636] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3006.636] (==) modeset(0): DPI set to (96, 96)
[ 3006.636] (II) Loading sub module "fb"
[ 3006.636] (II) LoadModule: "fb"
[ 3006.636] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3006.636] (II) Module fb: vendor="X.Org Foundation"
[ 3006.636] compiled for 1.19.2, module version = 1.0.0
[ 3006.636] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3006.636] (II) UnloadModule: "fbdev"
[ 3006.636] (II) Unloading fbdev
[ 3006.636] (II) UnloadSubModule: "fbdevhw"
[ 3006.636] (II) Unloading fbdevhw
[ 3006.636] (II) UnloadModule: "vesa"
[ 3006.636] (II) Unloading vesa
[ 3006.636] (==) Depth 24 pixmap format is 32 bpp
[ 3006.750] (==) modeset(0): Backing store enabled
[ 3006.750] (==) modeset(0): Silken mouse enabled
[ 3006.750] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3006.751] (==) modeset(0): DPMS enabled
[ 3006.751] (II) modeset(0): [DRI2] Setup complete
[ 3006.751] (II) modeset(0): [DRI2] DRI driver: i965
[ 3006.751] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 3006.751] (--) RandR disabled
[ 3006.754] (II) SELinux: Disabled on system
[ 3006.765] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3006.765] (II) AIGLX: enabled GLX_ARB_create_context
[ 3006.765] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3006.765] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 3006.765] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3006.765] (II) AIGLX: enabled GLX_SGI_swap_control
[ 3006.765] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3006.765] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3006.765] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 3006.765] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3006.765] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 3006.765] (II) AIGLX: Loaded and initialized i965
[ 3006.765] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3006.767] (II) modeset(0): Damage tracking initialized
[ 3006.767] (II) modeset(0): Setting screen physical size to 361 x 203
[ 3006.845] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 3006.845] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3006.845] (II) LoadModule: "libinput"
[ 3006.845] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 3006.848] (II) Module libinput: vendor="X.Org Foundation"
[ 3006.848] compiled for 1.19.0, module version = 0.23.0
[ 3006.848] Module class: X.Org XInput Driver
[ 3006.848] ABI class: X.Org XInput driver, version 24.1
[ 3006.848] (II) Using input driver 'libinput' for 'Power Button'
[ 3006.848] (**) Power Button: always reports core events
[ 3006.848] (**) Option "Device" "/dev/input/event6"
[ 3006.848] (**) Option "_source" "server/udev"
[ 3006.849] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 3006.849] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[ 3006.884] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6"
[ 3006.884] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3006.884] (**) Option "xkb_model" "pc105"
[ 3006.884] (**) Option "xkb_layout" "pl"
[ 3006.920] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 3006.920] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[ 3006.921] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 3006.921] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 3006.921] (II) Using input driver 'libinput' for 'Video Bus'
[ 3006.921] (**) Video Bus: always reports core events
[ 3006.921] (**) Option "Device" "/dev/input/event9"
[ 3006.921] (**) Option "_source" "server/udev"
[ 3006.922] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 3006.922] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 3006.940] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event9"
[ 3006.940] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3006.940] (**) Option "xkb_model" "pc105"
[ 3006.940] (**) Option "xkb_layout" "pl"
[ 3006.941] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 3006.941] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 3006.942] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 3006.942] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3006.942] (II) Using input driver 'libinput' for 'Power Button'
[ 3006.942] (**) Power Button: always reports core events
[ 3006.942] (**) Option "Device" "/dev/input/event4"
[ 3006.942] (**) Option "_source" "server/udev"
[ 3006.943] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 3006.943] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 3006.956] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[ 3006.956] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 3006.956] (**) Option "xkb_model" "pc105"
[ 3006.956] (**) Option "xkb_layout" "pl"
[ 3006.957] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 3006.957] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 3006.958] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 3006.958] (II) No input driver specified, ignoring this device.
[ 3006.958] (II) This device may have been added with another device file.
[ 3006.959] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 3006.959] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 3006.959] (II) Using input driver 'libinput' for 'Sleep Button'
[ 3006.959] (**) Sleep Button: always reports core events
[ 3006.959] (**) Option "Device" "/dev/input/event5"
[ 3006.959] (**) Option "_source" "server/udev"
[ 3006.960] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 3006.960] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[ 3006.980] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event5"
[ 3006.980] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 3006.980] (**) Option "xkb_model" "pc105"
[ 3006.980] (**) Option "xkb_layout" "pl"
[ 3006.981] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 3006.981] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard
[ 3006.982] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 3006.982] (II) No input driver specified, ignoring this device.
[ 3006.983] (II) This device may have been added with another device file.
[ 3006.983] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
[ 3006.983] (II) No input driver specified, ignoring this device.
[ 3006.983] (II) This device may have been added with another device file.
[ 3006.984] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 3006.984] (II) No input driver specified, ignoring this device.
[ 3006.984] (II) This device may have been added with another device file.
[ 3006.984] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event13)
[ 3006.984] (II) No input driver specified, ignoring this device.
[ 3006.984] (II) This device may have been added with another device file.
[ 3006.985] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 3006.985] (II) No input driver specified, ignoring this device.
[ 3006.985] (II) This device may have been added with another device file.
[ 3006.985] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[ 3006.986] (II) No input driver specified, ignoring this device.
[ 3006.986] (II) This device may have been added with another device file.
[ 3006.986] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[ 3006.986] (II) No input driver specified, ignoring this device.
[ 3006.986] (II) This device may have been added with another device file.
[ 3006.987] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event17)
[ 3006.987] (II) No input driver specified, ignoring this device.
[ 3006.987] (II) This device may have been added with another device file.
[ 3006.988] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event1)
[ 3006.988] (**) SIGMACHIP Usb Mouse: Applying InputClass "libinput pointer catchall"
[ 3006.988] (II) Using input driver 'libinput' for 'SIGMACHIP Usb Mouse'
[ 3006.988] (**) SIGMACHIP Usb Mouse: always reports core events
[ 3006.988] (**) Option "Device" "/dev/input/event1"
[ 3006.988] (**) Option "_source" "server/udev"
[ 3007.048] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 3007.049] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is a pointer caps
[ 3007.080] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:1C4F:0034.0003/input/input21/event1"
[ 3007.080] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 10)
[ 3007.080] (**) Option "AccelerationScheme" "none"
[ 3007.081] (**) SIGMACHIP Usb Mouse: (accel) selected scheme none/0
[ 3007.081] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[ 3007.081] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[ 3007.140] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 3007.141] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is a pointer caps
[ 3007.142] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse0)
[ 3007.142] (II) No input driver specified, ignoring this device.
[ 3007.142] (II) This device may have been added with another device file.
[ 3007.143] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3007.143] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 3007.143] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 3007.143] (**) AT Translated Set 2 keyboard: always reports core events
[ 3007.143] (**) Option "Device" "/dev/input/event0"
[ 3007.143] (**) Option "_source" "server/udev"
[ 3007.144] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 3007.144] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 3007.180] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3007.180] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3007.180] (**) Option "xkb_model" "pc105"
[ 3007.180] (**) Option "xkb_layout" "pl"
[ 3007.181] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 3007.181] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 3007.182] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event2)
[ 3007.182] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "libinput touchpad catchall"
[ 3007.182] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS GlidePoint'
[ 3007.182] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 3007.182] (**) Option "Device" "/dev/input/event2"
[ 3007.182] (**) Option "_source" "server/udev"
[ 3007.183] (II) input device 'AlpsPS/2 ALPS GlidePoint', /dev/input/event2 is tagged by udev as: Touchpad
[ 3007.183] (II) AlpsPS/2 ALPS GlidePoint: no resolution or size hints, assuming a size of 69x50mm
[ 3007.183] (II) input device 'AlpsPS/2 ALPS GlidePoint', /dev/input/event2 is a touchpad
[ 3007.212] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event2"
[ 3007.212] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 12)
[ 3007.212] (**) Option "AccelerationScheme" "none"
[ 3007.212] (**) AlpsPS/2 ALPS GlidePoint: (accel) selected scheme none/0
[ 3007.212] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 3007.213] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 3007.213] (II) input device 'AlpsPS/2 ALPS GlidePoint', /dev/input/event2 is tagged by udev as: Touchpad
[ 3007.213] (II) AlpsPS/2 ALPS GlidePoint: no resolution or size hints, assuming a size of 69x50mm
[ 3007.213] (II) input device 'AlpsPS/2 ALPS GlidePoint', /dev/input/event2 is a touchpad
[ 3007.214] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 3007.214] (II) No input driver specified, ignoring this device.
[ 3007.214] (II) This device may have been added with another device file.
[ 3007.215] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 3007.215] (II) No input driver specified, ignoring this device.
[ 3007.215] (II) This device may have been added with another device file.
[ 3007.216] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[ 3007.216] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 3007.216] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 3007.216] (**) Dell WMI hotkeys: always reports core events
[ 3007.216] (**) Option "Device" "/dev/input/event8"
[ 3007.216] (**) Option "_source" "server/udev"
[ 3007.216] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
[ 3007.216] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is a keyboard
[ 3007.236] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[ 3007.236] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[ 3007.236] (**) Option "xkb_model" "pc105"
[ 3007.236] (**) Option "xkb_layout" "pl"
[ 3007.237] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
[ 3007.237] (II) input device 'Dell WMI hotkeys', /dev/input/event8 is a keyboard
[ 3016.289] (II) modeset(0): EDID vendor "LGD", prod id 747
[ 3016.289] (II) modeset(0): Printing DDC gathered Modelines:
[ 3016.289] (II) modeset(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 3016.289] (II) modeset(0): Modeline "1366x768"x0.0 48.30 1366 1402 1450 1524 768 771 776 792 -hsync -vsync (31.7 kHz e)
[ 3017.259] (II) modeset(0): EDID vendor "LGD", prod id 747
[ 3017.259] (II) modeset(0): Printing DDC gathered Modelines:
[ 3017.259] (II) modeset(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 3017.259] (II) modeset(0): Modeline "1366x768"x0.0 48.30 1366 1402 1450 1524 768 771 776 792 -hsync -vsync (31.7 kHz e)
Kod: Zaznacz cały
cat ~/.xsession-errors > xsession-errors.txt
Kod: Zaznacz cały
cat /var/log/kdm.log > kdm.log.txt
Przeinstalowałem system i pulpit zablokował, zawiesił się jak podpiłem neta, odblokował się po wylogowaniu i zalogowaniu.
To coś z myszą laptop kupiłem używany tu i tam z deka popękany.