Zle wyswietlanie okien-compiz fusion

m99 · Post autor: **m99** » 19 września 2007, 16:33

Witam
Instalowalem compiz fusion wedlug tego faq
Uruchamiam go poprzez

fusion-icon

Moj problem polega na tym ze okno wyswietla tak (chodzi o to ze pokazuje mi pulpit ) .Dodam jezscze ze jak otworze terminal to mi sie pokazuje czarny ekran i nie moge nic w nim pisac
Czy ktos wie jak rozwiazac moj problem ?Mam 1024 ramu i karte graficzna intela.
Pozdrawiam

Gniazdo · Post autor: **Gniazdo** » 21 września 2007, 03:57

Tu masz działającą konfigurację. Miałem to samo co ty dodałem Load "dbe" i ruszyło pięknie. Pozdro

Kod: Zaznacz cały

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"dbe"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"pl"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "Device"
	Identifier	"Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
	Driver		"intel"
	BusID		"PCI:0:2:0"
	Option "MonitorLayout" "CRT"
	Option "CloneRefresh"  "75"
	Option "DevicePresence" "yes"
	Option "Clone" "true"
	Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
EndSection
Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x800" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x800" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x800" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x800" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x800" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x800" "640x480"
	EndSubSection
EndSection
Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection
Section "Extensions"
  Option "Composite" "Enable"
EndSection

m99 · Post autor: **m99** » 21 września 2007, 11:09

Dzieki, pomoglo

niegowic · Post autor: **niegowic** » 30 września 2007, 22:50

Zainstalowałem compiza i jak wydalem polecenie felix@felix-laptop:~$ compiz --replace cpp
Dostalem w wyniku błąd:

Kod: Zaznacz cały

/usr/bin/compiz: line 777:  6481 Segmentation fault      (core dumped) $*
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  145
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  145
  Minor opcode:  3
  Resource id:  0x0
Failed to open device

Moja karta to intel 915i i mam pytanie czy trzeba cos instalowac do niej dodatkowo zeby dzialalo czy cos przeoczylem instalowalem compiza prosto z repozytorium.

Prosze o pomoc jestem poczatkujacy w zakresie compiza.

bzykla · Post autor: **bzykla** » 05 października 2007, 14:45

niestety wydaje mi sie ze compiz na naszych kartach w debianie zadziala dopiero po wydaniu wersji nastepnej po 0.6

wniosek taki wyciagnalem z jakiegos newsa ktory mowil ze problemy z wyswietlaniem na "niektorych" kartach rozwiaza dopiero w nastepnej wersji a byl to news informujacy o wydaniu 0.6

ja szukalem juz wszedzie i nie znalazlem zadnej pomocy
pozostaje czekac........

spider · Post autor: **spider** » 10 października 2007, 18:04

Ja dodałem Load "dbe" do Section "Module" w /etc/X11/xorg.conf i daje mi taki błąd:

Kod: Zaznacz cały

spider@debian:~$ fusion-icon
 * Detected Session: gnome
 * Searching for installed applications...
 * NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING
 * Using the GTK Interface
 * Starting Compiz
 ... executing: compiz.real --replace --sm-disable --ignore-desktop-hints ccp --indirect-rendering
compiz.real (core) - Fatal: No composite extension

Mój xorg.conf jest nieco "goły" i wygląda tak:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
Load "dbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 64.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "nVidia Corporation G70 [GeForce 7600 GT]"
Driver "nvidia"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7600 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection

Jakieś pomysły? :-/

Ventrue · Post autor: **Ventrue** » 10 października 2007, 20:34

spider, spróbuj dodać to do xorg.conf:

Kod: Zaznacz cały

Section "Extensions"
    Option "Composite" "Enable"
EndSection

spider · Post autor: **spider** » 11 października 2007, 01:04

Pięknie dziękuję Ventrue podziałało :-D

Tak na marginesie, gdyby ktoś potrzebował. Instalowałem według tej strony: Instalacja Compiz fusion

Ventrue · Post autor: **Ventrue** » 11 października 2007, 08:11

spider, nie ma za co.