komputer si

[karabash]

Mnie pomogła kompilacja jądra.

[Tymoteusz]

Witajcie.
Miałem podobny problem na Ubuntu ale to prawie to samo. Próbowałem dodawać acpi=force do menu.list ale nic nie pomogło. W biosie w zakładce power coś tam zmieniłem acpi coś tam na yes i już było w porządku.

[Wodzu]

U mniej na starej płycie z chipsetem Intel 440LX pomogło załadowanie modułu apm z parametrem power_off=1

Kod: Zaznacz cały

# insmod apm power_off=1

Aby za każdym razem nie ładować modułu ręcznie dopisujemy go do /etc/modules

Kod: Zaznacz cały

# echo "apm power_off=1" >>/etc/modules

[De_sant]

Widze ze temat jest popularny wiec i ja sie podepne

Mam na laptopie CDLinuxa uaktualnionego do Lennego (jajko 2.6.20-cdlinux IceWM)
Moj problem polega na tym ze nie moge wylaczac/resetowac komputera z konta zwyklego usera.
By wylaczyc kompa musze:
a) logowac sie na roota

Kod: Zaznacz cały

su
halt / reboot

lub b) wcisnac w laptopie przycisk (POWER).

Jako root moge wszystko. (ale tego kompa uzywa plec piekna i na szczescie nie wie co to root)
Przekopalem troche forum cdlinuksa i nic nie znalazlem.
Moze Wy cos poradzicie? (w koncu cdlinux to debian)

Przekopalem plik /etc/group ale nic tam nie znalazlem.

[fnmirk]

De_sant, a to nie działa?

[De_sant]

Dzieki fnmirk - dziala
Fajosko to teraz wyglada :mrgreen:

Sam wpis do sudoers to bylo za malo (z menu IceWM sie nie wylaczal)
musialem dodac ten skrot/skrypt na pulpit

Kod: Zaznacz cały

#!/bin/bash
sudo halt

troche lipna metoda - ale dziala

[doker]

Ja mam troszkę inny problem, aplet wyłącz niby działa po jego kliknięciu wyskakuje informacja, trwa zamykanie systemu. I teraz nie wiem czy laptop jest wyłączony czy nie bo niby wszystko gaśnie, ale pali się przycisk włączenia laptopa. Ale jeżeli wykonam jako root polecenie:

Kod: Zaznacz cały

halt

to widzę, że procesy się zamykają i przycisk gaśnie.

[aviaton]

Mam taki sam problem,

to może inaczej
masz mc -> wejdź do katalogu desktop -> polecenie:
touch stop
pojawi się plik stop -> najedź na niego i
edytuj przez F4 ->wpisz:

u mnie nie odnajduje pliku stop.

• dop.po wymianie płyty głównej wszystko działa.

[Iskra]

Podpinam się pod wątek, bo mój problem jest z tej samej kategorii.

Posiadam od niedawna laptopa - Asus F5GL. Postawiłam na nim Debiana Lennego 64-bit - wszystko pięknie ładnie, ale po zatrzymaniu systemu nie następowało wyłączenie sprzętu. Wypróbowałam - podane również tu - wszystkie acpi=off, acpi=force itp. itd. - bez efektów. Postawiłam Ubuntu, wykonałam powyższe - efekt ten sam (=0). Pokopałam głębiej w Google i znalazłam informacje, że winę za to ponosi najprawdopodobniej tablica DSDT, którą Asus skompilował kompilatorem microsoftowym, zamiast intelowskim. Niestety na sourceforge nie ma tablicy DSDT do mojego modelu laptopa. Znalazłam informację o tym jak sobie ją własnoręcznie 'załatwić' - tutaj . Ale:
dmesg zwraca informację, że:

Kod: Zaznacz cały

[    0.000000] ACPI: DSDT AFFA06E0, D7C4 (r1  F5GL0 F5GL0213      213 INTL 20051117)

ale już przy:

Kod: Zaznacz cały

[    0.000000] ACPI: APIC AFFA0390, 0070 (r1 112008 APIC1435 20081120 MSFT       97)

Czyli na moje tak jakby DSDT było kompilowane intelowskim, a apic micros.

Pytanie: czy ktoś mógłby podpowiedzieć, czego w takim razie ewentualnie szukać/co próbować zrobić? Dmesg, jeśli chodzi o ACPI, wywala mnóstwo błędów, niemniej nie potrafię zinterpretować tych informacji na tyle, by wiedzieć, jak kombinować dalej.

W razie gdyby było potrzebne:

Kod: Zaznacz cały

 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Kernel command line: root=UUID=95055989-ebd6-414d-a27b-28b2f73929a9 ro acpi=force 
[   23.005189] acpi device:1a: registered as cooling_device2

oraz

Kod: Zaznacz cały

...[    0.000000] ACPI: RSDP 000FA270, 0024 (r2 ACPIAM)
[    0.000000] ACPI: XSDT AFFA0100, 0084 (r1 112008 XSDT1435 20081120 MSFT       97)
[    0.000000] ACPI: FACP AFFA0290, 00F4 (r3 112008 FACP1435 20081120 MSFT       97)
[    0.000000] ACPI: DSDT AFFA06E0, D7C4 (r1  F5GL0 F5GL0213      213 INTL 20051117)
[    0.000000] ACPI: FACS AFFAE000, 0040
[    0.000000] ACPI: APIC AFFA0390, 0070 (r1 112008 APIC1435 20081120 MSFT       97)
[    0.000000] ACPI: MCFG AFFA0440, 003C (r1 112008 OEMMCFG  20081120 MSFT       97)
[    0.000000] ACPI: OEMX AFFA0480, 0176 (r1 112008 OEMX1435 20081120 MSFT       97)
[    0.000000] ACPI: WDRT AFFA0600, 0047 (r1 112008 NV-WDRT  20081120 MSFT       97)
[    0.000000] ACPI: ECDT AFFA0680, 0053 (r1 112008 OEMECDT  20081120 MSFT       97)
[    0.000000] ACPI: DBGP AFFA0400, 0034 (r1 112008 DBGP1435 20081120 MSFT       97)
[    0.000000] ACPI: BOOT AFFA0650, 0028 (r1 112008 BOOT1435 20081120 MSFT       97)
[    0.000000] ACPI: OEMB AFFAE040, 0072 (r1 112008 OEMB1435 20081120 MSFT       97)
[    0.000000] ACPI: HPET AFFADEB0, 0038 (r1 112008 OEMHPET0 20081120 MSFT       97)
[    0.000000] ACPI: NVHD AFFAE0C0, 0284 (r1 112008  NVHDCP  20081120 MSFT       97)
[    0.000000] ACPI: SSDT AFFAF030, 04F0 (r1  PmRef    CpuPm     3000 INTL 20051117)
...
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
...
[    0.017952] ACPI: Core revision 20080609
[    0.024349] ACPI: Checking initramfs for custom DSDT
[    0.372266] ENABLING IO-APIC IRQs
[    0.372533] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
...
[    0.504611] ACPI: bus type pci registered
[    0.504611] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[    0.504611] PCI: Not using MMCONFIG.
[    0.504611] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
[    0.504611] PCI: Using configuration type 1 for base access
[    0.510267] ACPI: EC: EC description table is found, configuring boot EC
[    0.534916] ACPI: Interpreter enabled
[    0.534980] ACPI: (supports S0 S3 S4 S5)
[    0.535238] ACPI: Using IOAPIC for interrupt routing
[    0.535404] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[    0.549252] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[    0.549316] PCI: Using MMCONFIG for extended config space
[    0.576390] ACPI: EC: GPE = 0x0, I/O: command/status = 0x0, data = 0x0
[    0.576390] ACPI: EC: driver started in poll mode
[    0.576451] ACPI: PCI Root Bridge [PCI0] (0000:00)
...
[    0.584916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.585340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.585661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[    0.585935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.586174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.586409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.586643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NUCR._PRT]
[    0.605003] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.605428] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.608426] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.609355] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.610296] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
[    0.611224] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.612158] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.613088] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.614015] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.614943] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.615870] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.616776] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.617704] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[    0.618636] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.619564] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.620531] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.621463] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
[    0.622394] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.623323] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.624255] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.625193] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *10
[    0.626075] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.627004] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.627932] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.628820] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.629747] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.630675] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.631604] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.632532] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.633462] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.634390] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.635324] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.636314] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.637205] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.638096] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *14
[    0.638986] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[    0.639873] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15
[    0.640737] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14
[    0.641626] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[    0.642519] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.643492] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.644465] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.645392] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.646322] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled.
[    0.647252] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
[    0.648187] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
[    0.649124] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *10
[    0.650017] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *11
[    0.650912] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *9
[    0.651802] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *5
[    0.652286] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.652342] pnp: PnP ACPI init
[    0.652342] ACPI: bus type pnp registered
[    0.665903] pnp: PnP ACPI: found 15 devices
[    0.665964] ACPI: ACPI bus type pnp unregistered
[    0.666027] PnPBIOS: Disabled by ACPI PNP
[    0.666101] PCI: Using ACPI for IRQ routing

i tu już są błędy:

Kod: Zaznacz cały

[    2.003881] ACPI: SSDT AFFAE620, 0206 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
[    2.004752] ACPI: SSDT AFFAE8C0, 0765 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[    2.006456] Monitor-Mwait will be used to enter C-1 state
[    2.006460] Monitor-Mwait will be used to enter C-3 state
[    2.006606] ACPI: CPU0 (power states: C1[C1] C2[C3])
[    2.006861] processor ACPI0007:00: registered as cooling_device0
[    2.006925] ACPI: Processor [P001] (supports 8 throttling states)
[    2.007467] ACPI: SSDT AFFAE550, 00CC (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
[    2.008271] ACPI: SSDT AFFAE830, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
[    2.010168] ACPI: CPU1 (power states: C1[C1] C2[C3])
[    2.010409] processor ACPI0007:01: registered as cooling_device1
[    2.010474] ACPI: Processor [P002] (supports 8 throttling states)
[    2.012778] Marking TSC unstable due to TSC halts in idle
[    3.012059] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[    3.012231] ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.RTMP] (Node f742ac90), AE_TIME
[    3.012517] ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.THRM._TMP] (Node f742aba0), AE_TIME
...

[   12.864685] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   12.889042] ACPI: Power Button (FF) [PWRF]
[   12.889315] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   12.921039] ACPI: Power Button (CM) [PWRB]
[   12.921208] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[   12.953027] ACPI: Sleep Button (CM) [SLPB]
[   12.953193] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[   15.408083] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[   15.408267] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STC5] (Node f742a240), AE_TIME
[   15.408580] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RPIN] (Node f742a210), AE_TIME
[   15.408868] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.LID_._LID] (Node f744c2a0), AE_TIME
[   15.409167] ACPI: Lid Switch [LID]
[   15.409346] asus-laptop: Asus Laptop Support version 0.42
[   15.415833] asus-laptop: BSTS called, 0xaf1f returned
[   15.415982] asus-laptop:   F5GL model detected
[   15.938217] ACPI: AC Adapter [AC0] (on-line)
...
[   18.964070] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[   18.964250] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[   18.964556] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[   18.964846] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[   18.965142] asus-laptop: Error changing brightness
[   19.464304] Registered led device: asus::mail
[   19.964936] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[   19.965128] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SMBR] (Node f742a498), AE_TIME
[   19.965443] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.BIF9] (Node f744a900), AE_TIME
[   19.965734] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.BAT0._BIF] (Node f744a768), AE_TIME
[   19.966028] ACPI Exception (battery-0330): AE_TIME, Evaluating _BIF [20080609]
[   19.966206] ACPI: Battery Slot [BAT0] (battery present)
[   19.977429] ACPI: WMI: Mapper loaded
...
[   23.004060] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[   23.004239] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[   23.004550] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[   23.004837] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.IXVE.VGA_.LCDD._BCM] (Node f74183c0), AE_TIME
[   23.005189] acpi device:1a: registered as cooling_device2
[   23.005459] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:11/device:12/input/input9
[   23.097119] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
...
[ 1537.856019] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1537.856041] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1537.856145] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1537.856224] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1537.856303] asus-laptop: Error changing brightness
[ 1540.865046] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1540.865062] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1540.865163] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1540.865243] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1540.865322] asus-laptop: Error changing brightness
[ 1543.877069] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1543.877089] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1543.877194] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1543.877273] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1543.877352] asus-laptop: Error changing brightness
[ 1546.888042] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1546.888057] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1546.888158] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1546.888238] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1546.888317] asus-laptop: Error changing brightness
[ 1549.901017] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1549.901035] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1549.901135] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1549.901214] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1549.901293] asus-laptop: Error changing brightness
[ 1552.913037] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1552.913141] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1552.913220] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1552.913300] asus-laptop: Error changing brightness
[ 1555.921017] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1555.921032] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1555.921138] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1555.921217] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1555.921296] asus-laptop: Error changing brightness
[ 1558.929035] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1558.929053] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1558.929160] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1558.929239] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1558.929319] asus-laptop: Error changing brightness
[ 1561.937087] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1561.937104] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1561.937209] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1561.937289] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1561.937368] asus-laptop: Error changing brightness
[ 1564.948094] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1564.948112] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1564.948216] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1564.948296] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1564.948376] asus-laptop: Error changing brightness
[ 1567.960051] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1567.960069] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1567.960175] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1567.960254] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1567.960334] asus-laptop: Error changing brightness
[ 1570.980036] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1570.980055] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1570.980157] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1570.980235] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1570.980315] asus-laptop: Error changing brightness
[ 1573.989091] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 1573.989110] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.SADC] (Node f742a1c8), AE_TIME
[ 1573.989210] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.STBR] (Node f742a168), AE_TIME
[ 1573.989289] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.ATKD.SPLV] (Node f7448480), AE_TIME
[ 1573.989368] asus-laptop: Error changing brightness