sterowniki NVIDIA - konfiguracja Xów i 3D

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
asd123
Posty: 7
Rejestracja: 07 lutego 2009, 15:32

sterowniki NVIDIA - konfiguracja Xów i 3D

Post autor: asd123 »

Witam.
Mam problem z akceleracją 3d. Zainstalowałem sterowniki NVIDIA, nie mogę uruchomić systemu. Wyskakuje błąd. Proszę o pomoc już naprawdę długo się męczę z tymi sterownikami.
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10)
Current Operating System: Linux ip-81-15-242-137 2.6.28.6-custom #1 SMP Fri Feb 20 16:09:45 CET 2009 i686
Build Date: 09 January 2009 02:57:16AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 18:24:23 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module "ramdac" already built-in
sh: /sbin/lrm-video: No such file or directory
FATAL: Error running install command for nvidia
(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10)
Current Operating System: Linux ip-81-15-242-137 2.6.26.8-custom #1 SMP Tue Feb 24 17:04:17 CET 2009 i686
Build Date: 09 January 2009 02:57:16AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 18:26:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module "ramdac" already built-in
sh: /sbin/lrm-video: No such file or directory
FATAL: Error running install command for nvidia
(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10)
Current Operating System: Linux ip-81-15-242-137 2.6.26.8-custom #1 SMP Tue Feb 24 17:04:17 CET 2009 i686
Build Date: 09 January 2009 02:57:16AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 18:30:09 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module "ramdac" already built-in
sh: /sbin/lrm-video: No such file or directory
FATAL: Error running install command for nvidia
(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10)
Current Operating System: Linux ip-81-15-242-137 2.6.26.8-custom #1 SMP Tue Feb 24 17:04:17 CET 2009 i686
Build Date: 09 January 2009 02:57:16AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 18:48:19 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module "ramdac" already built-in
sh: /sbin/lrm-video: No such file or directory
FATAL: Error running install command for nvidia
(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Kod: Zaznacz cały

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder57)  Wed Jul  2 12:30:48 PDT 2008


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/etc/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "IgnoreDisplayDevices" "TV"
    Option         "Coolbits" "1"
    Option         "RandRRotation" "true"
    Option         "AddARGBGLXVisuals" "true"
    Option         "TripleBuffer" "false"
    Option         "DynamicTwinView" "true"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
maly
Beginner
Posty: 289
Rejestracja: 03 lipca 2007, 14:52

Post autor: maly »

Zainstaluj sterownik NVIDII według tego poradnika : nvidia drivers
Następnie wygeneruj xorg.conf : link
Jeśli to nie pomoże, poradzimy coś.
smertius
Posty: 6
Rejestracja: 29 czerwca 2008, 15:44

Post autor: smertius »

(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
Czyli nie może załadować modułu jądra.

Trochę bardziej czytelny poradnik(wedlug mnie) , jak zainstalować sterownik Nvidia znajduje się tutaj.
asd123
Posty: 7
Rejestracja: 07 lutego 2009, 15:32

Post autor: asd123 »

Problem nie znika. Po skonfigurowaniu X przez:

Kod: Zaznacz cały

dpkg-reconfigure xserver-xorg
X-y działają, ale akceleracja 3d nadal nie działa.
Awatar użytkownika
SpeedVin
Beginner
Posty: 101
Rejestracja: 18 stycznia 2009, 16:23
Lokalizacja: /dev/null

Post autor: SpeedVin »

Spróbuj innych poleceń np.

Kod: Zaznacz cały

X -configure
albo:

Kod: Zaznacz cały

nvidia -xconfig
;-)
asd123
Posty: 7
Rejestracja: 07 lutego 2009, 15:32

Post autor: asd123 »

Próbowałem:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
Nie działa. Z

Kod: Zaznacz cały

 X -configure
jest podobnie.
borlus
Beginner
Posty: 299
Rejestracja: 08 stycznia 2008, 14:27
Lokalizacja: okolice Poznania

Post autor: borlus »

Oczywiście podmieniłeś wygenerowany poleceniem X -configure plik z oryginalnym xorg.conf oraz uzupełniłeś ewentualne "braki" nowego configa?
asd123
Posty: 7
Rejestracja: 07 lutego 2009, 15:32

Post autor: asd123 »

borlus pisze:Oczywiście podmieniłeś wygenerowany poleceniem X -configure plik z oryginalnym xorg.conf
Podmienilem. Tak on wyglada :

Kod: Zaznacz cały

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/etc/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "xtrap"
	Load  "dri"
	Load  "record"
	Load  "dbe"
	Load  "extmod"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  430   270	# mm
	Identifier   "Monitor0"
	VendorName   "ACI"
	ModelName    "ASUS VW192S&#65533]: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# [i]
        #Option     "FlatPanel"          	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# [i]
        #Option     "FPScale"            	# [<bool>]
        #Option     "FPTweak"            	# [i]
        #Option     "DualHead"           	# [<bool>]
	Identifier  "Card0"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "NV17 [GeForce4 MX 420]"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
Ale znowu sie blad pojawia:

Kod: Zaznacz cały

(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
borlus
Beginner
Posty: 299
Rejestracja: 08 stycznia 2008, 14:27
Lokalizacja: okolice Poznania

Post autor: borlus »

Na mój rozum wina jest po stronie sterownika... Ale mogę się mylić... Podaj proszę model kart graficznej, dokładną nazwę sterownika który zainstalowałeś oraz wklej log xorg'a (/var/log/Xorg.0.log).
Awatar użytkownika
ilin
Senior Member
Posty: 2292
Rejestracja: 26 sierpnia 2007, 11:54
Lokalizacja: PRLu

Post autor: ilin »

Model jest w xorg.conf

Jaką wersję sterów instalowałeś.
ODPOWIEDZ