Strona 2 z 2

: 25 grudnia 2009, 12:07
autor: fi9o
Juz podaje:
lspci -k oraz

Kod: Zaznacz cały

 linux-image-2.6.32-trunk-686 

: 25 grudnia 2009, 14:42
autor: fnmirk
Wklej wynik na forum, odnośnik nie działa tak jak powinien.

: 25 grudnia 2009, 17:08
autor: fi9o
Dziwne, bo mi się otwiera poprawnie.

Kod: Zaznacz cały

#
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
	Kernel modules: intelfb
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
	Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
	Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
	Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
	Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
	Kernel modules: iTCO_wdt, intel-rng
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
	Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
	Kernel modules: i2c-i801
02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
	Kernel driver in use: b44
	Kernel modules: b44
02:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket
02:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
	Kernel driver in use: ohci1394
	Kernel modules: firewire-ohci, ohci1394
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
	Kernel driver in use: iwl3945
	Kernel modules: iwl3945


[ Dodano: |26 Gru 2009|, 2009 20:06 ]
sa jakies pomysly dla mojego problemu?

: 28 grudnia 2009, 22:07
autor: fnmirk
Powinieneś mieć taki wpis:

Kod: Zaznacz cały

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

paolus, już na to zwrócił uwagę.