Zrywanie sieci

[Rafal_F]

dmesg zapisuje logi w /var/log. Pliki nazywają się dmesg, dmesg0, dmesg1.gz, dmesg2.gz....

[harmichalh]

A jak wykonać to polecenie, jeśli nie mogę się połączyć przez SSH?

[Rafal_F]

Przecież pliki możesz odczytać po restarcie/wznowieniu połączenia.

[harmichalh]

Po restarcie wpisałem polecenie dmesg, oto zawartość pliku /var/log/dmseg:

Kod: Zaznacz cały

[    0.000000] Initializing cgroup subsys cpuset[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=3f601dff-567f-4c9b-839d-cb56982f78e7 ro quiet text
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005bfb0000 (usable)
[    0.000000]  BIOS-e820: 000000005bfb0000 - 000000005bfbe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005bfbe000 - 000000005bfe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005bfe0000 - 000000005c000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: System manufacturer System Product Name/A8V-VM SE, BIOS 0201    11/20/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ f0000000 old size 32 MB
[    0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[    0.000000] last_pfn = 0x5bfb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000005bfb0000
[    0.000000]  0000000000 - 005be00000 page 2M
[    0.000000]  005be00000 - 005bfb0000 page 4k
[    0.000000] kernel direct mapping tables up to 5bfb0000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 36bf8000 - 375f4000
[    0.000000] ACPI: RSDP 00000000000fa850 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 000000005bfb0100 00044 (v01 A M I  OEMXSDT  11000620 MSFT 00000097)
[    0.000000] ACPI: FACP 000000005bfb0290 000F4 (v03 A M I  OEMFACP  11000620 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000005bfb0440 049B0 (v01  A0710 A0710000 00000000 INTL 02002026)
[    0.000000] ACPI: FACS 000000005bfbe000 00040
[    0.000000] ACPI: APIC 000000005bfb0390 00068 (v01 A M I  OEMAPIC  11000620 MSFT 00000097)
[    0.000000] ACPI: MCFG 000000005bfb0400 0003C (v01 A M I  OEMMCFG  11000620 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000005bfbe040 00046 (v01 A M I  AMI_OEM  11000620 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000005bfb0000
[    0.000000] Initmem setup node 0 0000000000000000-000000005bfb0000
[    0.000000]   NODE_DATA [000000005bfab000 - 000000005bfaffff]
[    0.000000]  [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880059e00000-ffff88005b3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005bfb0
[    0.000000] On node 0 totalpages: 376639
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5095 pages used for memmap
[    0.000000]   DMA32 zone: 367561 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 5c000000 (gap: 5c000000:a2c00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005bc00000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 371483
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=3f601dff-567f-4c9b-839d-cb56982f78e7 ro quiet text
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ f0000000 old size 32 MB
[    0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[    0.000000] Node 0: aperture @ f0000000 size 128 MB
[    0.000000] Memory: 1465056k/1507008k available (3429k kernel code, 452k absent, 41500k reserved, 3309k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2194.889 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.77 BogoMIPS (lpj=8779556)
[    0.004013] pid_max: default: 32768 minimum: 301
[    0.004076] Security Framework initialized
[    0.004085] AppArmor: AppArmor disabled by boot time parameter
[    0.004308] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006546] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.008249] Mount-cache hash table entries: 256
[    0.008441] Initializing cgroup subsys cpuacct
[    0.008449] Initializing cgroup subsys memory
[    0.008468] Initializing cgroup subsys devices
[    0.008471] Initializing cgroup subsys freezer
[    0.008473] Initializing cgroup subsys net_cls
[    0.008476] Initializing cgroup subsys blkio
[    0.008490] Initializing cgroup subsys perf_event
[    0.008530] tseg: 0000000000
[    0.008547] mce: CPU supports 5 MCE banks
[    0.008584] SMP alternatives: switching to UP code
[    0.010921] ACPI: Core revision 20110623
[    0.016574] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.057344] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[    0.060003] Performance Events: AMD PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      4
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Brought up 1 CPUs
[    0.060003] Total of 1 processors activated (4389.77 BogoMIPS).
[    0.060003] devtmpfs: initialized
[    0.060602] PM: Registering ACPI NVS region at 5bfbe000 (139264 bytes)
[    0.060789] print_constraints: dummy: 
[    0.060857] NET: Registered protocol family 16
[    0.060982] node 0 link 0: io port [1000, ffffff]
[    0.060987] TOM: 0000000060000000 aka 1536M
[    0.060990] node 0 link 0: mmio [d0000000, dfffffff]
[    0.060993] node 0 link 0: mmio [fa000000, faffffff]
[    0.060997] node 0 link 0: mmio [a0000, bffff]
[    0.060999] node 0 link 0: mmio [60000000, ffffffff]
[    0.061003] bus: [00, ff] on node 0 link 0
[    0.061006] bus: 00 index 0 [io  0x0000-0xffff]
[    0.061008] bus: 00 index 1 [mem 0x60000000-0xfcffffffff]
[    0.061011] bus: 00 index 2 [mem 0xfa000000-0xfaffffff]
[    0.061013] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[    0.061026] ACPI: bus type pci registered
[    0.061108] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.061112] PCI: not using MMCONFIG
[    0.061114] PCI: Using configuration type 1 for base access
[    0.062004] bio: create slab <bio-0> at 0
[    0.062116] ACPI: Added _OSI(Module Device)
[    0.062119] ACPI: Added _OSI(Processor Device)
[    0.062121] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.062123] ACPI: Added _OSI(Processor Aggregator Device)
[    0.062689] ACPI: EC: Look up EC in DSDT
[    0.063627] ACPI: Executed 1 blocks of module-level executable AML code
[    0.066466] ACPI: Interpreter enabled
[    0.066473] ACPI: (supports S0 S1 S4 S5)
[    0.066494] ACPI: Using IOAPIC for interrupt routing
[    0.066519] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.067823] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.092722] ACPI: No dock devices found.
[    0.092726] HEST: Table not found.
[    0.092732] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.092817] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.092993] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.092997] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.093000] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.093003] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.093006] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xff77ffff] (ignored)
[    0.093029] pci 0000:00:00.0: [1106:0336] type 0 class 0x000600
[    0.093041] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.093142] pci 0000:00:00.1: [1106:1336] type 0 class 0x000600
[    0.093193] pci 0000:00:00.2: [1106:2336] type 0 class 0x000600
[    0.093244] pci 0000:00:00.3: [1106:3336] type 0 class 0x000600
[    0.093296] pci 0000:00:00.4: [1106:4336] type 0 class 0x000600
[    0.093347] pci 0000:00:00.5: [1106:5336] type 0 class 0x000800
[    0.093419] pci 0000:00:00.6: [1106:6290] type 0 class 0x000600
[    0.093470] pci 0000:00:00.7: [1106:7336] type 0 class 0x000600
[    0.093525] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[    0.093567] pci 0000:00:01.0: supports D1
[    0.093589] pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
[    0.093664] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.093697] pci 0000:00:03.0: [1106:c238] type 1 class 0x000604
[    0.093771] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.093813] pci 0000:00:0f.0: [1106:0591] type 0 class 0x000101
[    0.093828] pci 0000:00:0f.0: reg 10: [io  0xd800-0xd807]
[    0.093837] pci 0000:00:0f.0: reg 14: [io  0xd400-0xd403]
[    0.093847] pci 0000:00:0f.0: reg 18: [io  0xd000-0xd007]
[    0.093856] pci 0000:00:0f.0: reg 1c: [io  0xc800-0xc803]
[    0.093865] pci 0000:00:0f.0: reg 20: [io  0xc400-0xc40f]
[    0.093874] pci 0000:00:0f.0: reg 24: [io  0xc000-0xc0ff]
[    0.093924] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[    0.093965] pci 0000:00:0f.1: reg 20: [io  0xfc00-0xfc0f]
[    0.094028] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[    0.094068] pci 0000:00:10.0: reg 20: [io  0xb800-0xb81f]
[    0.094103] pci 0000:00:10.0: supports D1 D2
[    0.094105] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094128] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.094168] pci 0000:00:10.1: reg 20: [io  0xb400-0xb41f]
[    0.094203] pci 0000:00:10.1: supports D1 D2
[    0.094205] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094227] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[    0.094267] pci 0000:00:10.2: reg 20: [io  0xb000-0xb01f]
[    0.094302] pci 0000:00:10.2: supports D1 D2
[    0.094304] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094326] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[    0.094365] pci 0000:00:10.3: reg 20: [io  0xa800-0xa81f]
[    0.094401] pci 0000:00:10.3: supports D1 D2
[    0.094403] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094424] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[    0.094439] pci 0000:00:10.4: reg 10: [mem 0xf9fffc00-0xf9fffcff]
[    0.094499] pci 0000:00:10.4: supports D1 D2
[    0.094502] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094527] pci 0000:00:11.0: [1106:3337] type 0 class 0x000601
[    0.094625] pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
[    0.094685] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[    0.094700] pci 0000:00:12.0: reg 10: [io  0xa400-0xa4ff]
[    0.094709] pci 0000:00:12.0: reg 14: [mem 0xf9fff800-0xf9fff8ff]
[    0.094765] pci 0000:00:12.0: supports D1 D2
[    0.094767] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094791] pci 0000:00:13.0: [1106:337b] type 1 class 0x000604
[    0.094862] pci 0000:00:13.1: [1106:337a] type 1 class 0x000604
[    0.094939] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.094963] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.094986] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.095007] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.095030] PCI: peer root bus 00 res updated from pci conf
[    0.095070] pci 0000:01:00.0: [1106:3230] type 0 class 0x000300
[    0.095084] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.095092] pci 0000:01:00.0: reg 14: [mem 0xfa000000-0xfaffffff]
[    0.095120] pci 0000:01:00.0: reg 30: [mem 0xfbef0000-0xfbefffff pref]
[    0.095146] pci 0000:01:00.0: supports D1 D2
[    0.095178] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.095184] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfbefffff]
[    0.095188] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.095232] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.095282] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[    0.095347] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[    0.095403] pci 0000:05:06.0: [10ec:8139] type 0 class 0x000200
[    0.095418] pci 0000:05:06.0: reg 10: [io  0xe800-0xe8ff]
[    0.095427] pci 0000:05:06.0: reg 14: [mem 0xfbfffc00-0xfbfffcff]
[    0.095483] pci 0000:05:06.0: supports D1 D2
[    0.095485] pci 0000:05:06.0: PME# supported from D1 D2 D3hot D3cold
[    0.095518] pci 0000:00:13.1: PCI bridge to [bus 05-05] (subtractive decode)
[    0.095522] pci 0000:00:13.1:   bridge window [io  0xe000-0xefff]
[    0.095526] pci 0000:00:13.1:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.095533] pci 0000:00:13.1:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.095536] pci 0000:00:13.1:   bridge window [mem 0x60000000-0xfcffffffff] (subtractive decode)
[    0.095540] pci 0000:00:13.1:   bridge window [mem 0xfa000000-0xfaffffff] (subtractive decode)
[    0.095543] pci 0000:00:13.1:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.095566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.095737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.095766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.095865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.095888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[    0.095926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[    0.095963]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.095967]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.095970] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.108027] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.108080] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.108131] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.108181] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.108232] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.108283] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.108333] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.108384] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.108565] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.108568] vgaarb: loaded
[    0.108570] vgaarb: bridge control possible 0000:01:00.0
[    0.108629] PCI: Using ACPI for IRQ routing
[    0.116046] PCI: pci_cache_line_size set to 64 bytes
[    0.116052] pci 0000:00:01.0: address space collision: [mem 0xfa000000-0xfbefffff] conflicts with PCI Bus #00 [mem 0xfa000000-0xfaffffff]
[    0.116062] pci 0000:00:00.0: address space collision: [mem 0xf0000000-0xf7ffffff pref] conflicts with GART [mem 0xf0000000-0xf7ffffff]
[    0.116117] pci 0000:01:00.0: no compatible bridge window for [mem 0xfa000000-0xfaffffff]
[    0.116167] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.116171] reserve RAM buffer: 000000005bfb0000 - 000000005bffffff 
[    0.118736] pnp: PnP ACPI init
[    0.118760] ACPI: bus type pnp registered
[    0.118908] pnp 00:00: [bus 00-ff]
[    0.118911] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.118916] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.118919] pnp 00:00: [io  0x0d00-0xffff window]
[    0.118922] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.118925] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.118928] pnp 00:00: [mem 0x60000000-0xff77ffff window]
[    0.119019] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.119103] pnp 00:01: [dma 4]
[    0.119106] pnp 00:01: [io  0x0000-0x000f]
[    0.119108] pnp 00:01: [io  0x0081-0x0083]
[    0.119111] pnp 00:01: [io  0x0087]
[    0.119113] pnp 00:01: [io  0x0089-0x008b]
[    0.119116] pnp 00:01: [io  0x008f]
[    0.119118] pnp 00:01: [io  0x00c0-0x00df]
[    0.119154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.119166] pnp 00:02: [io  0x0070-0x0071]
[    0.119184] pnp 00:02: [irq 8]
[    0.119217] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.119228] pnp 00:03: [io  0x0061]
[    0.119262] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.119273] pnp 00:04: [io  0x00f0-0x00ff]
[    0.119278] pnp 00:04: [irq 13]
[    0.119312] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.119782] pnp 00:05: [io  0x0378-0x037f]
[    0.119785] pnp 00:05: [io  0x0778-0x077b]
[    0.119790] pnp 00:05: [irq 7]
[    0.119793] pnp 00:05: [dma 3]
[    0.119961] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.119995] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    0.119998] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    0.120001] pnp 00:06: [io  0x0290-0x0297]
[    0.120115] system 00:06: [io  0x0290-0x0297] has been reserved
[    0.120119] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120214] pnp 00:07: [io  0x0010-0x001f]
[    0.120217] pnp 00:07: [io  0x0022-0x003f]
[    0.120219] pnp 00:07: [io  0x0044-0x005f]
[    0.120222] pnp 00:07: [io  0x0062-0x0063]
[    0.120224] pnp 00:07: [io  0x0065-0x006f]
[    0.120227] pnp 00:07: [io  0x0072-0x007f]
[    0.120229] pnp 00:07: [io  0x0080]
[    0.120232] pnp 00:07: [io  0x0084-0x0086]
[    0.120234] pnp 00:07: [io  0x0088]
[    0.120237] pnp 00:07: [io  0x008c-0x008e]
[    0.120239] pnp 00:07: [io  0x0090-0x009f]
[    0.120242] pnp 00:07: [io  0x00a2-0x00bf]
[    0.120244] pnp 00:07: [io  0x00e0-0x00ef]
[    0.120247] pnp 00:07: [io  0x03e0-0x03e7]
[    0.120249] pnp 00:07: [mem 0xff300000-0xff3fffff]
[    0.120252] pnp 00:07: [io  0x04d0-0x04d1]
[    0.120254] pnp 00:07: [io  0x0800-0x087f]
[    0.120257] pnp 00:07: [io  0x0400-0x041f]
[    0.120259] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.120332] system 00:07: [io  0x03e0-0x03e7] has been reserved
[    0.120336] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.120339] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.120342] system 00:07: [io  0x0400-0x041f] has been reserved
[    0.120347] system 00:07: [mem 0xff300000-0xff3fffff] has been reserved
[    0.120350] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120390] pnp 00:08: [io  0x0060]
[    0.120393] pnp 00:08: [io  0x0064]
[    0.120399] pnp 00:08: [irq 1]
[    0.120443] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.120514] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.120516] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[    0.120572] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.120576] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.120579] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120867] pnp 00:0a: [irq 3]
[    0.120869] pnp 00:0a: [dma 0 disabled]
[    0.120872] pnp 00:0a: [io  0x02f8-0x02ff]
[    0.120990] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.121025] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.121081] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.121084] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121252] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.121255] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.121258] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.121261] pnp 00:0c: [mem 0x00100000-0x5fffffff]
[    0.121264] pnp 00:0c: [mem 0xff780000-0xffffffff]
[    0.121269] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.121274] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.121279] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.121283] pnp 00:0c: disabling [mem 0x00100000-0x5fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.121303] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[    0.121308] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[    0.121312] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[    0.121317] pnp 00:0c: disabling [mem 0x00100000-0x5fffffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[    0.121364] system 00:0c: [mem 0xff780000-0xffffffff] has been reserved
[    0.121367] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.121510] pnp: PnP ACPI: found 13 devices
[    0.121513] ACPI: ACPI bus type pnp unregistered
[    0.128301] Switching to clocksource acpi_pm
[    0.128341] pci 0000:01:00.0: no compatible bridge window for [mem 0xfbef0000-0xfbefffff pref]
[    0.128350] PCI: max bus depth: 1 pci_try_num: 2
[    0.128405] pci 0000:00:01.0: BAR 14: assigned [mem 0x60000000-0x617fffff]
[    0.128409] pci 0000:00:03.0: BAR 14: assigned [mem 0x61800000-0x619fffff]
[    0.128413] pci 0000:00:03.0: BAR 15: assigned [mem 0x61a00000-0x61bfffff 64bit pref]
[    0.128418] pci 0000:00:03.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.128421] pci 0000:00:02.0: BAR 14: assigned [mem 0x61c00000-0x61dfffff]
[    0.128425] pci 0000:00:02.0: BAR 15: assigned [mem 0x61e00000-0x61ffffff 64bit pref]
[    0.128429] pci 0000:00:02.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.128433] pci 0000:01:00.0: BAR 1: assigned [mem 0x60000000-0x60ffffff]
[    0.128439] pci 0000:01:00.0: BAR 6: assigned [mem 0x61000000-0x6100ffff pref]
[    0.128442] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.128448] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x617fffff]
[    0.128452] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.128458] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.128462] pci 0000:00:02.0:   bridge window [io  0x2000-0x2fff]
[    0.128467] pci 0000:00:02.0:   bridge window [mem 0x61c00000-0x61dfffff]
[    0.128472] pci 0000:00:02.0:   bridge window [mem 0x61e00000-0x61ffffff 64bit pref]
[    0.128479] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[    0.128483] pci 0000:00:03.0:   bridge window [io  0x1000-0x1fff]
[    0.128488] pci 0000:00:03.0:   bridge window [mem 0x61800000-0x619fffff]
[    0.128493] pci 0000:00:03.0:   bridge window [mem 0x61a00000-0x61bfffff 64bit pref]
[    0.128500] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[    0.128510] pci 0000:00:13.1: PCI bridge to [bus 05-05]
[    0.128513] pci 0000:00:13.1:   bridge window [io  0xe000-0xefff]
[    0.128518] pci 0000:00:13.1:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.128534] pci 0000:00:01.0: setting latency timer to 64
[    0.128541] pci 0000:00:02.0: enabling device (0100 -> 0103)
[    0.128567] pci 0000:00:02.0: setting latency timer to 64
[    0.128573] pci 0000:00:03.0: enabling device (0100 -> 0103)
[    0.128586] pci 0000:00:03.0: setting latency timer to 64
[    0.128593] pci 0000:00:13.0: setting latency timer to 64
[    0.128599] pci 0000:00:13.1: setting latency timer to 64
[    0.128603] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.128606] pci_bus 0000:00: resource 5 [mem 0x60000000-0xfcffffffff]
[    0.128609] pci_bus 0000:00: resource 6 [mem 0xfa000000-0xfaffffff]
[    0.128612] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    0.128615] pci_bus 0000:01: resource 1 [mem 0x60000000-0x617fffff]
[    0.128618] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[    0.128621] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.128623] pci_bus 0000:02: resource 1 [mem 0x61c00000-0x61dfffff]
[    0.128626] pci_bus 0000:02: resource 2 [mem 0x61e00000-0x61ffffff 64bit pref]
[    0.128630] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.128632] pci_bus 0000:03: resource 1 [mem 0x61800000-0x619fffff]
[    0.128635] pci_bus 0000:03: resource 2 [mem 0x61a00000-0x61bfffff 64bit pref]
[    0.128639] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.128641] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.128644] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    0.128647] pci_bus 0000:05: resource 5 [mem 0x60000000-0xfcffffffff]
[    0.128650] pci_bus 0000:05: resource 6 [mem 0xfa000000-0xfaffffff]
[    0.128653] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    0.128728] NET: Registered protocol family 2
[    0.128874] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.130070] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.134249] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.135282] TCP: Hash tables configured (established 262144 bind 65536)
[    0.135286] TCP reno registered
[    0.135300] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.135351] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.135540] NET: Registered protocol family 1
[    0.135556] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.135584] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.135590] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[    0.135767] pci 0000:01:00.0: Boot video device
[    0.135773] PCI: CLS 64 bytes, default 64
[    0.135850] Unpacking initramfs...
[    0.429653] Freeing initrd memory: 10224k freed
[    0.440424] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[    0.444786] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    0.445162] audit: initializing netlink socket (disabled)
[    0.445175] type=2000 audit(1398372605.444:1): initialized
[    0.460726] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.461202] VFS: Disk quotas dquot_6.5.2
[    0.461233] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.461316] msgmni has been set to 2881
[    0.461479] alg: No test for stdrng (krng)
[    0.461511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.461515] io scheduler noop registered
[    0.461517] io scheduler deadline registered
[    0.461530] io scheduler cfq registered (default)
[    0.461669] pcieport 0000:00:02.0: setting latency timer to 64
[    0.461760] pcieport 0000:00:03.0: setting latency timer to 64
[    0.461882] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.461909] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.461912] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.462250] ERST: Table is not found!
[    0.462252] GHES: HEST is not enabled!
[    0.462325] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.482734] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.503349] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.503556] Linux agpgart interface v0.103
[    0.503682] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.503685] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.503863] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.503976] mousedev: PS/2 mouse device common for all mice
[    0.504043] rtc_cmos 00:02: RTC can wake from S4
[    0.504201] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.504235] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.504249] cpuidle: using governor ladder
[    0.504251] cpuidle: using governor menu
[    0.504485] TCP cubic registered
[    0.504520] NET: Registered protocol family 10
[    0.505054] Mobile IPv6
[    0.505057] NET: Registered protocol family 17
[    0.505061] Registering the dns_resolver key type
[    0.505198] PM: Hibernation image not present or could not be loaded.
[    0.505213] registered taskstats version 1
[    0.505774] rtc_cmos 00:02: setting system clock to 2014-04-24 20:50:06 UTC (1398372606)
[    0.505824] Initializing network drop monitor service
[    0.507340] Freeing unused kernel memory: 576k freed
[    0.507752] Write protecting the kernel read-only data: 6144k
[    0.512716] Freeing unused kernel memory: 648k freed
[    0.518599] Freeing unused kernel memory: 688k freed
[    0.536278] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.536488] udevd[44]: starting version 175
[    0.655054] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    0.655622] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1a400, 00:18:f3:0c:8e:b1, IRQ 23
[    0.656350] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[    0.680780] SCSI subsystem initialized
[    0.732227] usbcore: registered new interface driver usbfs
[    0.732257] usbcore: registered new interface driver hub
[    0.738164] usbcore: registered new device driver usb
[    0.738496] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.738562] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.738597] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.738650] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9fffc00
[    0.739285] uhci_hcd: USB Universal Host Controller Interface driver
[    0.743973] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    0.748129] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.748181] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.748184] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.748187] usb usb1: Product: EHCI Host Controller
[    0.748190] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.748192] usb usb1: SerialNumber: 0000:00:10.4
[    0.748342] hub 1-0:1.0: USB hub found
[    0.748348] hub 1-0:1.0: 8 ports detected
[    0.749267] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.749285] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.749333] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b800
[    0.749385] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.749388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.749391] usb usb2: Product: UHCI Host Controller
[    0.749393] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.749396] usb usb2: SerialNumber: 0000:00:10.0
[    0.749541] hub 2-0:1.0: USB hub found
[    0.749547] hub 2-0:1.0: 2 ports detected
[    0.749647] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.749656] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.749686] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b400
[    0.749727] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.749730] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.749733] usb usb3: Product: UHCI Host Controller
[    0.749735] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.749738] usb usb3: SerialNumber: 0000:00:10.1
[    0.749848] hub 3-0:1.0: USB hub found
[    0.749852] hub 3-0:1.0: 2 ports detected
[    0.749928] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.749940] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.749963] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b000
[    0.750003] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.750006] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.750008] usb usb4: Product: UHCI Host Controller
[    0.750010] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.750013] usb usb4: SerialNumber: 0000:00:10.2
[    0.750124] hub 4-0:1.0: USB hub found
[    0.750128] hub 4-0:1.0: 2 ports detected
[    0.750204] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.750212] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.750242] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000a800
[    0.750284] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.750287] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.750290] usb usb5: Product: UHCI Host Controller
[    0.750292] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.750294] usb usb5: SerialNumber: 0000:00:10.3
[    0.750404] hub 5-0:1.0: USB hub found
[    0.750408] hub 5-0:1.0: 2 ports detected
[    0.756124] 8139cp 0000:05:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    0.756726] 8139too: 8139too Fast Ethernet driver 0.9.28
[    0.757558] 8139too 0000:05:06.0: eth1: RealTek RTL8139 at 0xffffc9000032ec00, 00:30:4f:38:35:fa, IRQ 16
[    0.759197] libata version 3.00 loaded.
[    0.759571] pata_via 0000:00:0f.1: version 0.3.4
[    0.763176] scsi0 : pata_via
[    0.767370] scsi1 : pata_via
[    0.768986] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.768990] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    0.769127] sata_via 0000:00:0f.0: version 2.6
[    0.769189] sata_via 0000:00:0f.0: routed to hard irq line 5
[    0.772997] scsi2 : sata_via
[    0.776451] scsi3 : sata_via
[    0.777814] ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xc400 irq 21
[    0.777817] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xc408 irq 21
[    0.986268] ata1.00: ATA-7: ST380215A, 3.AAD, max UDMA/100
[    0.986273] ata1.00: 156301488 sectors, multi 16: LBA48 
[    0.988014] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.052806] ata1.00: configured for UDMA/100
[    1.052945] scsi 0:0:0:0: Direct-Access     ATA      ST380215A        3.AA PQ: 0 ANSI: 5
[    1.166507] ata3.00: ATA-7: WDC WD2500AAJS-00RYA0, 12.01B01, max UDMA/133
[    1.166510] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.181005] ata3.00: configured for UDMA/133
[    1.224432] ata2.01: ATAPI: HL-DT-STDVD-RAM GSA-H20L, 1.02, max UDMA/33
[    1.240308] ata2.01: configured for UDMA/33
[    1.242991] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H20L 1.02 PQ: 0 ANSI: 5
[    1.243273] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-0 12.0 PQ: 0 ANSI: 5
[    1.244025] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    1.418375] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[    1.418378] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.418381] usb 2-1: Product: USB Optical Mouse
[    1.418383] usb 2-1: Manufacturer: PixArt
[    1.444021] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.470316] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.470382] sd 0:0:0:0: [sda] Write Protect is off
[    1.470386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.470689] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input1
[    1.470792] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.471422] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:10.0-1/input0
[    1.471447] usbcore: registered new interface driver usbhid
[    1.471450] usbhid: USB HID core driver
[    1.471731] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.471774] sd 2:0:0:0: [sdb] Write Protect is off
[    1.471777] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.471796] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.475219] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.475287] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    1.475353] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.475540] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.475544] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.475869] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    1.479557]  sdb: sdb1
[    1.479809] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.516056]  sda: sda1 sda2 sda3 sda4
[    1.516515] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.009308] PM: Starting manual resume from disk
[    2.009314] PM: Hibernation image partition 8:4 present
[    2.009316] PM: Looking for hibernation image.
[    2.031914] PM: Image not found (code -22)
[    2.031917] PM: Hibernation image not present or could not be loaded.
[    2.098622] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.893734] udevd[335]: starting version 175
[    4.600107] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    4.600117] ACPI: Power Button [PWRB]
[    4.600193] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.600197] ACPI: Power Button [PWRF]
[    4.653012] ACPI: acpi_idle registered with cpuidle
[    4.717059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.733342] EDAC MC: Ver: 2.1.0
[    4.747207] MCE: In-kernel MCE decoding enabled.
[    4.748368] AMD64 EDAC driver v3.4.0
[    4.748416] EDAC amd64: DRAM ECC disabled.
[    4.748420] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    4.748421]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    4.748423]  (Note that use of the override may cause unknown side effects.)
[    4.897459] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ (1 cpu cores) (version 2.20.00)
[    4.897530] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[    4.897532] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[    4.897535] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[    4.897537] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    4.898983] parport_pc 00:05: reported by Plug and Play ACPI
[    4.899094] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    4.979995] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.236183] Adding 7789564k swap on /dev/sda4.  Priority:-1 extents:1 across:7789564k 
[    7.269327] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.768619] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    7.945136] loop: module loaded
[    9.416144] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    9.462056] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

W logach w pliku kern.log powtarza się od chwili gdy sieć przestaje działać coś takiego:

Kod: Zaznacz cały

Apr 24 21:02:56 SerwerDomowy kernel: [255889.056015] eth0: no IPv6 routers present
Apr 24 21:03:37 SerwerDomowy kernel: [255930.820168] via-rhine 0000:00:12.0: eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
Apr 24 21:03:37 SerwerDomowy kernel: [255930.820873] via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Apr 24 21:03:41 SerwerDomowy kernel: [255934.820182] via-rhine 0000:00:12.0: eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
Apr 24 21:03:41 SerwerDomowy kernel: [255934.820297] via-rhine 0000:00:12.0: eth0: Reset not complete yet. Trying harder.
Apr 24 21:03:41 SerwerDomowy kernel: [255934.820894] via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Przy okazji: podłączyłem też dla testów inną kartę sieciową (przewodową), graficznie w ustawieniach widzę to połączenie, ale po wsadzeniu kabla do gniazdka nadal jest napis "Kabel jest niepodłączony", a diody na karcie nie świecą, ani nie migają. Nie mam pewności czy karta jest sprawna.

[harmichalh]

Problem nadal występuje.
Po ok 40 min w pełni poprawnego działania, komputer przestaje być widoczny po sieci, a po włączeniu środowiska graficznego i przeglądarki, nie można załadować żadnej strony. Komputer też nie odpowiada na ping-i, ale w ustawieniach sieci (graficznie) jest informacja, że połączono 100 Mbps i o przydzielonym adresie IP. Po restarcie, wszystko działa tak jak powinno przez kolejna ok 40 min. Na początku czas ten był dłuższy i wynosił kilka godzin.

Syslog i kern.log, z informacją, która się pojawia i powtarza gdy występują problemy umieściłem w poprzednich postach.

Wynik polecenia dmesg, po restarcie (zawartość pliku /var/log/dmseg) umieściłem w poprzednim poście.

Wynik polecenia dmesg, kiedy sieć nie działa:

Kod: Zaznacz cały

[    0.000000] Initializing cgroup subsys cpuset[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=3f601dff-567f-4c9b-839d-cb56982f78e7 ro quiet text
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005bfb0000 (usable)
[    0.000000]  BIOS-e820: 000000005bfb0000 - 000000005bfbe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005bfbe000 - 000000005bfe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005bfe0000 - 000000005c000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: System manufacturer System Product Name/A8V-VM SE, BIOS 0201    11/20/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ f0000000 old size 32 MB
[    0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[    0.000000] last_pfn = 0x5bfb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000005bfb0000
[    0.000000]  0000000000 - 005be00000 page 2M
[    0.000000]  005be00000 - 005bfb0000 page 4k
[    0.000000] kernel direct mapping tables up to 5bfb0000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 36bf8000 - 375f4000
[    0.000000] ACPI: RSDP 00000000000fa850 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 000000005bfb0100 00044 (v01 A M I  OEMXSDT  11000620 MSFT 00000097)
[    0.000000] ACPI: FACP 000000005bfb0290 000F4 (v03 A M I  OEMFACP  11000620 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000005bfb0440 049B0 (v01  A0710 A0710000 00000000 INTL 02002026)
[    0.000000] ACPI: FACS 000000005bfbe000 00040
[    0.000000] ACPI: APIC 000000005bfb0390 00068 (v01 A M I  OEMAPIC  11000620 MSFT 00000097)
[    0.000000] ACPI: MCFG 000000005bfb0400 0003C (v01 A M I  OEMMCFG  11000620 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000005bfbe040 00046 (v01 A M I  AMI_OEM  11000620 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000005bfb0000
[    0.000000] Initmem setup node 0 0000000000000000-000000005bfb0000
[    0.000000]   NODE_DATA [000000005bfab000 - 000000005bfaffff]
[    0.000000]  [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880059e00000-ffff88005b3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005bfb0
[    0.000000] On node 0 totalpages: 376639
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5095 pages used for memmap
[    0.000000]   DMA32 zone: 367561 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 5c000000 (gap: 5c000000:a2c00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005bc00000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 371483
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=3f601dff-567f-4c9b-839d-cb56982f78e7 ro quiet text
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ f0000000 old size 32 MB
[    0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[    0.000000] Node 0: aperture @ f0000000 size 128 MB
[    0.000000] Memory: 1465056k/1507008k available (3429k kernel code, 452k absent, 41500k reserved, 3309k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2195.174 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.34 BogoMIPS (lpj=8780696)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004076] Security Framework initialized
[    0.004085] AppArmor: AppArmor disabled by boot time parameter
[    0.004309] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006549] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.008254] Mount-cache hash table entries: 256
[    0.008447] Initializing cgroup subsys cpuacct
[    0.008454] Initializing cgroup subsys memory
[    0.008473] Initializing cgroup subsys devices
[    0.008476] Initializing cgroup subsys freezer
[    0.008479] Initializing cgroup subsys net_cls
[    0.008481] Initializing cgroup subsys blkio
[    0.008495] Initializing cgroup subsys perf_event
[    0.008535] tseg: 0000000000
[    0.008553] mce: CPU supports 5 MCE banks
[    0.008589] SMP alternatives: switching to UP code
[    0.010922] ACPI: Core revision 20110623
[    0.016575] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.057348] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[    0.060003] Performance Events: AMD PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      4
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Brought up 1 CPUs
[    0.060003] Total of 1 processors activated (4390.34 BogoMIPS).
[    0.060003] devtmpfs: initialized
[    0.060396] PM: Registering ACPI NVS region at 5bfbe000 (139264 bytes)
[    0.060583] print_constraints: dummy: 
[    0.060651] NET: Registered protocol family 16
[    0.060777] node 0 link 0: io port [1000, ffffff]
[    0.060781] TOM: 0000000060000000 aka 1536M
[    0.060784] node 0 link 0: mmio [d0000000, dfffffff]
[    0.060787] node 0 link 0: mmio [fb000000, fbffffff]
[    0.060791] node 0 link 0: mmio [a0000, bffff]
[    0.060793] node 0 link 0: mmio [60000000, ffffffff]
[    0.060797] bus: [00, ff] on node 0 link 0
[    0.060800] bus: 00 index 0 [io  0x0000-0xffff]
[    0.060803] bus: 00 index 1 [mem 0x60000000-0xfcffffffff]
[    0.060805] bus: 00 index 2 [mem 0xfb000000-0xfbffffff]
[    0.060807] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[    0.060819] ACPI: bus type pci registered
[    0.060901] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.060905] PCI: not using MMCONFIG
[    0.060907] PCI: Using configuration type 1 for base access
[    0.061792] bio: create slab <bio-0> at 0
[    0.061907] ACPI: Added _OSI(Module Device)
[    0.061910] ACPI: Added _OSI(Processor Device)
[    0.061912] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.061914] ACPI: Added _OSI(Processor Aggregator Device)
[    0.062480] ACPI: EC: Look up EC in DSDT
[    0.063421] ACPI: Executed 1 blocks of module-level executable AML code
[    0.066212] ACPI: Interpreter enabled
[    0.066219] ACPI: (supports S0 S1 S4 S5)
[    0.066240] ACPI: Using IOAPIC for interrupt routing
[    0.066265] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.067569] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.092287] ACPI: No dock devices found.
[    0.092290] HEST: Table not found.
[    0.092296] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.092381] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.092556] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.092560] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.092563] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.092566] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.092569] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xff77ffff] (ignored)
[    0.092592] pci 0000:00:00.0: [1106:0336] type 0 class 0x000600
[    0.092603] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.092702] pci 0000:00:00.1: [1106:1336] type 0 class 0x000600
[    0.092753] pci 0000:00:00.2: [1106:2336] type 0 class 0x000600
[    0.092804] pci 0000:00:00.3: [1106:3336] type 0 class 0x000600
[    0.092857] pci 0000:00:00.4: [1106:4336] type 0 class 0x000600
[    0.092908] pci 0000:00:00.5: [1106:5336] type 0 class 0x000800
[    0.092981] pci 0000:00:00.6: [1106:6290] type 0 class 0x000600
[    0.093032] pci 0000:00:00.7: [1106:7336] type 0 class 0x000600
[    0.093085] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[    0.093127] pci 0000:00:01.0: supports D1
[    0.093147] pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
[    0.093223] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.093255] pci 0000:00:03.0: [1106:c238] type 1 class 0x000604
[    0.093330] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.093371] pci 0000:00:0f.0: [1106:0591] type 0 class 0x000101
[    0.093387] pci 0000:00:0f.0: reg 10: [io  0xe800-0xe807]
[    0.093396] pci 0000:00:0f.0: reg 14: [io  0xe400-0xe403]
[    0.093405] pci 0000:00:0f.0: reg 18: [io  0xe000-0xe007]
[    0.093414] pci 0000:00:0f.0: reg 1c: [io  0xd800-0xd803]
[    0.093423] pci 0000:00:0f.0: reg 20: [io  0xd400-0xd40f]
[    0.093432] pci 0000:00:0f.0: reg 24: [io  0xd000-0xd0ff]
[    0.093482] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[    0.093523] pci 0000:00:0f.1: reg 20: [io  0xfc00-0xfc0f]
[    0.093587] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[    0.093626] pci 0000:00:10.0: reg 20: [io  0xc800-0xc81f]
[    0.093661] pci 0000:00:10.0: supports D1 D2
[    0.093664] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.093686] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.093725] pci 0000:00:10.1: reg 20: [io  0xc400-0xc41f]
[    0.093761] pci 0000:00:10.1: supports D1 D2
[    0.093763] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.093785] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[    0.093824] pci 0000:00:10.2: reg 20: [io  0xc000-0xc01f]
[    0.093859] pci 0000:00:10.2: supports D1 D2
[    0.093862] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.093883] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[    0.093923] pci 0000:00:10.3: reg 20: [io  0xb800-0xb81f]
[    0.093958] pci 0000:00:10.3: supports D1 D2
[    0.093961] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.093982] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[    0.093997] pci 0000:00:10.4: reg 10: [mem 0xfaeffc00-0xfaeffcff]
[    0.094057] pci 0000:00:10.4: supports D1 D2
[    0.094060] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094085] pci 0000:00:11.0: [1106:3337] type 0 class 0x000601
[    0.094184] pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
[    0.094244] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[    0.094259] pci 0000:00:12.0: reg 10: [io  0xb400-0xb4ff]
[    0.094268] pci 0000:00:12.0: reg 14: [mem 0xfaeff800-0xfaeff8ff]
[    0.094324] pci 0000:00:12.0: supports D1 D2
[    0.094326] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094351] pci 0000:00:13.0: [1106:337b] type 1 class 0x000604
[    0.094422] pci 0000:00:13.1: [1106:337a] type 1 class 0x000604
[    0.094500] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.094524] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.094547] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.094569] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.094592] PCI: peer root bus 00 res updated from pci conf
[    0.094631] pci 0000:01:00.0: [1106:3230] type 0 class 0x000300
[    0.094645] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.094653] pci 0000:01:00.0: reg 14: [mem 0xfb000000-0xfbffffff]
[    0.094681] pci 0000:01:00.0: reg 30: [mem 0xfaff0000-0xfaffffff pref]
[    0.094707] pci 0000:01:00.0: supports D1 D2
[    0.094739] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.094745] pci 0000:00:01.0:   bridge window [mem 0xfaf00000-0xfbffffff]
[    0.094749] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.094793] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.094843] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[    0.094908] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[    0.094972] pci 0000:00:13.1: PCI bridge to [bus 05-05] (subtractive decode)
[    0.094982] pci 0000:00:13.1:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.094985] pci 0000:00:13.1:   bridge window [mem 0x60000000-0xfcffffffff] (subtractive decode)
[    0.094988] pci 0000:00:13.1:   bridge window [mem 0xfb000000-0xfbffffff] (subtractive decode)
[    0.094992] pci 0000:00:13.1:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.095015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.095188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.095216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.095317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.095340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[    0.095379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[    0.095416]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.095420]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.095423] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.107429] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.107482] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.107532] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.107583] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.107633] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.107684] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.107736] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.107786] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.107958] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.107961] vgaarb: loaded
[    0.107962] vgaarb: bridge control possible 0000:01:00.0
[    0.108033] PCI: Using ACPI for IRQ routing
[    0.115419] PCI: pci_cache_line_size set to 64 bytes
[    0.115426] pci 0000:00:01.0: address space collision: [mem 0xfaf00000-0xfbffffff] conflicts with PCI Bus #00 [mem 0xfb000000-0xfbffffff]
[    0.115434] pci 0000:00:00.0: address space collision: [mem 0xf0000000-0xf7ffffff pref] conflicts with GART [mem 0xf0000000-0xf7ffffff]
[    0.115489] pci 0000:01:00.0: no compatible bridge window for [mem 0xfb000000-0xfbffffff]
[    0.115536] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.115539] reserve RAM buffer: 000000005bfb0000 - 000000005bffffff 
[    0.118124] pnp: PnP ACPI init
[    0.118153] ACPI: bus type pnp registered
[    0.118300] pnp 00:00: [bus 00-ff]
[    0.118304] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.118309] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.118311] pnp 00:00: [io  0x0d00-0xffff window]
[    0.118315] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.118318] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.118320] pnp 00:00: [mem 0x60000000-0xff77ffff window]
[    0.118408] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.118494] pnp 00:01: [dma 4]
[    0.118496] pnp 00:01: [io  0x0000-0x000f]
[    0.118499] pnp 00:01: [io  0x0081-0x0083]
[    0.118502] pnp 00:01: [io  0x0087]
[    0.118504] pnp 00:01: [io  0x0089-0x008b]
[    0.118507] pnp 00:01: [io  0x008f]
[    0.118509] pnp 00:01: [io  0x00c0-0x00df]
[    0.118544] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.118556] pnp 00:02: [io  0x0070-0x0071]
[    0.118571] pnp 00:02: [irq 8]
[    0.118606] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.118617] pnp 00:03: [io  0x0061]
[    0.118650] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.118661] pnp 00:04: [io  0x00f0-0x00ff]
[    0.118666] pnp 00:04: [irq 13]
[    0.118700] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.119169] pnp 00:05: [io  0x0378-0x037f]
[    0.119172] pnp 00:05: [io  0x0778-0x077b]
[    0.119178] pnp 00:05: [irq 7]
[    0.119180] pnp 00:05: [dma 3]
[    0.119350] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.119384] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    0.119387] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    0.119390] pnp 00:06: [io  0x0290-0x0297]
[    0.119489] system 00:06: [io  0x0290-0x0297] has been reserved
[    0.119493] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119587] pnp 00:07: [io  0x0010-0x001f]
[    0.119590] pnp 00:07: [io  0x0022-0x003f]
[    0.119592] pnp 00:07: [io  0x0044-0x005f]
[    0.119595] pnp 00:07: [io  0x0062-0x0063]
[    0.119597] pnp 00:07: [io  0x0065-0x006f]
[    0.119600] pnp 00:07: [io  0x0072-0x007f]
[    0.119602] pnp 00:07: [io  0x0080]
[    0.119605] pnp 00:07: [io  0x0084-0x0086]
[    0.119607] pnp 00:07: [io  0x0088]
[    0.119609] pnp 00:07: [io  0x008c-0x008e]
[    0.119612] pnp 00:07: [io  0x0090-0x009f]
[    0.119614] pnp 00:07: [io  0x00a2-0x00bf]
[    0.119617] pnp 00:07: [io  0x00e0-0x00ef]
[    0.119620] pnp 00:07: [io  0x03e0-0x03e7]
[    0.119622] pnp 00:07: [mem 0xff300000-0xff3fffff]
[    0.119625] pnp 00:07: [io  0x04d0-0x04d1]
[    0.119627] pnp 00:07: [io  0x0800-0x087f]
[    0.119630] pnp 00:07: [io  0x0400-0x041f]
[    0.119633] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.119701] system 00:07: [io  0x03e0-0x03e7] has been reserved
[    0.119705] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.119708] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.119711] system 00:07: [io  0x0400-0x041f] has been reserved
[    0.119716] system 00:07: [mem 0xff300000-0xff3fffff] has been reserved
[    0.119719] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119758] pnp 00:08: [io  0x0060]
[    0.119764] pnp 00:08: [io  0x0064]
[    0.119769] pnp 00:08: [irq 1]
[    0.119813] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.119883] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[    0.119886] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[    0.119941] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.119945] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.119948] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120254] pnp 00:0a: [irq 3]
[    0.120257] pnp 00:0a: [dma 0 disabled]
[    0.120260] pnp 00:0a: [io  0x02f8-0x02ff]
[    0.120377] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.120413] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.120468] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.120471] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120638] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.120641] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.120643] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.120646] pnp 00:0c: [mem 0x00100000-0x5fffffff]
[    0.120649] pnp 00:0c: [mem 0xff780000-0xffffffff]
[    0.120654] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.120659] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.120663] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.120668] pnp 00:0c: disabling [mem 0x00100000-0x5fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
[    0.120688] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[    0.120692] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[    0.120697] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[    0.120702] pnp 00:0c: disabling [mem 0x00100000-0x5fffffff disabled] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x00ffffff]
[    0.120748] system 00:0c: [mem 0xff780000-0xffffffff] has been reserved
[    0.120752] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.120895] pnp: PnP ACPI: found 13 devices
[    0.120897] ACPI: ACPI bus type pnp unregistered
[    0.127659] Switching to clocksource acpi_pm
[    0.127699] pci 0000:01:00.0: no compatible bridge window for [mem 0xfaff0000-0xfaffffff pref]
[    0.127706] PCI: max bus depth: 1 pci_try_num: 2
[    0.127759] pci 0000:00:01.0: BAR 14: assigned [mem 0x60000000-0x617fffff]
[    0.127763] pci 0000:00:03.0: BAR 14: assigned [mem 0x61800000-0x619fffff]
[    0.127767] pci 0000:00:03.0: BAR 15: assigned [mem 0x61a00000-0x61bfffff 64bit pref]
[    0.127772] pci 0000:00:03.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.127776] pci 0000:00:02.0: BAR 14: assigned [mem 0x61c00000-0x61dfffff]
[    0.127780] pci 0000:00:02.0: BAR 15: assigned [mem 0x61e00000-0x61ffffff 64bit pref]
[    0.127784] pci 0000:00:02.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.127788] pci 0000:01:00.0: BAR 1: assigned [mem 0x60000000-0x60ffffff]
[    0.127794] pci 0000:01:00.0: BAR 6: assigned [mem 0x61000000-0x6100ffff pref]
[    0.127797] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.127802] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x617fffff]
[    0.127807] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.127813] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[    0.127816] pci 0000:00:02.0:   bridge window [io  0x2000-0x2fff]
[    0.127822] pci 0000:00:02.0:   bridge window [mem 0x61c00000-0x61dfffff]
[    0.127827] pci 0000:00:02.0:   bridge window [mem 0x61e00000-0x61ffffff 64bit pref]
[    0.127833] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[    0.127837] pci 0000:00:03.0:   bridge window [io  0x1000-0x1fff]
[    0.127842] pci 0000:00:03.0:   bridge window [mem 0x61800000-0x619fffff]
[    0.127847] pci 0000:00:03.0:   bridge window [mem 0x61a00000-0x61bfffff 64bit pref]
[    0.127854] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[    0.127864] pci 0000:00:13.1: PCI bridge to [bus 05-05]
[    0.127881] pci 0000:00:01.0: setting latency timer to 64
[    0.127888] pci 0000:00:02.0: enabling device (0100 -> 0103)
[    0.127913] pci 0000:00:02.0: setting latency timer to 64
[    0.127920] pci 0000:00:03.0: enabling device (0100 -> 0103)
[    0.127933] pci 0000:00:03.0: setting latency timer to 64
[    0.127940] pci 0000:00:13.0: setting latency timer to 64
[    0.127946] pci 0000:00:13.1: setting latency timer to 64
[    0.127950] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.127953] pci_bus 0000:00: resource 5 [mem 0x60000000-0xfcffffffff]
[    0.127956] pci_bus 0000:00: resource 6 [mem 0xfb000000-0xfbffffff]
[    0.127959] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    0.127962] pci_bus 0000:01: resource 1 [mem 0x60000000-0x617fffff]
[    0.127964] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[    0.127967] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.127970] pci_bus 0000:02: resource 1 [mem 0x61c00000-0x61dfffff]
[    0.127973] pci_bus 0000:02: resource 2 [mem 0x61e00000-0x61ffffff 64bit pref]
[    0.127976] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.127979] pci_bus 0000:03: resource 1 [mem 0x61800000-0x619fffff]
[    0.127982] pci_bus 0000:03: resource 2 [mem 0x61a00000-0x61bfffff 64bit pref]
[    0.127985] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    0.127988] pci_bus 0000:05: resource 5 [mem 0x60000000-0xfcffffffff]
[    0.127991] pci_bus 0000:05: resource 6 [mem 0xfb000000-0xfbffffff]
[    0.127991] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    0.127991] NET: Registered protocol family 2
[    0.127991] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.127991] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.130264] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.131285] TCP: Hash tables configured (established 262144 bind 65536)
[    0.131289] TCP reno registered
[    0.131302] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.131350] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.131520] NET: Registered protocol family 1
[    0.131535] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.131562] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.131567] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[    0.131740] pci 0000:01:00.0: Boot video device
[    0.131743] PCI: CLS 64 bytes, default 64
[    0.131818] Unpacking initramfs...
[    0.425508] Freeing initrd memory: 10224k freed
[    0.436270] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[    0.440641] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[    0.441016] audit: initializing netlink socket (disabled)
[    0.441028] type=2000 audit(1398445626.440:1): initialized
[    0.456586] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.457056] VFS: Disk quotas dquot_6.5.2
[    0.457087] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.457166] msgmni has been set to 2881
[    0.457326] alg: No test for stdrng (krng)
[    0.457355] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.457359] io scheduler noop registered
[    0.457361] io scheduler deadline registered
[    0.457374] io scheduler cfq registered (default)
[    0.457514] pcieport 0000:00:02.0: setting latency timer to 64
[    0.457607] pcieport 0000:00:03.0: setting latency timer to 64
[    0.457739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.457767] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.457769] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.458117] ERST: Table is not found!
[    0.458119] GHES: HEST is not enabled!
[    0.458196] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.478608] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.499225] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.499429] Linux agpgart interface v0.103
[    0.499556] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.499558] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.499739] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.499852] mousedev: PS/2 mouse device common for all mice
[    0.499908] rtc_cmos 00:02: RTC can wake from S4
[    0.500080] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.500114] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.500127] cpuidle: using governor ladder
[    0.500130] cpuidle: using governor menu
[    0.500363] TCP cubic registered
[    0.500399] NET: Registered protocol family 10
[    0.500937] Mobile IPv6
[    0.500939] NET: Registered protocol family 17
[    0.500944] Registering the dns_resolver key type
[    0.501081] PM: Hibernation image not present or could not be loaded.
[    0.501096] registered taskstats version 1
[    0.501640] rtc_cmos 00:02: setting system clock to 2014-04-25 17:07:06 UTC (1398445626)
[    0.501689] Initializing network drop monitor service
[    0.503200] Freeing unused kernel memory: 576k freed
[    0.503614] Write protecting the kernel read-only data: 6144k
[    0.508488] Freeing unused kernel memory: 648k freed
[    0.514390] Freeing unused kernel memory: 688k freed
[    0.532155] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.532362] udevd[44]: starting version 175
[    0.660415] usbcore: registered new interface driver usbfs
[    0.660448] usbcore: registered new interface driver hub
[    0.665591] usbcore: registered new device driver usb
[    0.666289] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.666357] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.666387] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.666443] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfaeffc00
[    0.666921] SCSI subsystem initialized
[    0.676062] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.676118] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.676122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.676125] usb usb1: Product: EHCI Host Controller
[    0.676127] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.676129] usb usb1: SerialNumber: 0000:00:10.4
[    0.676306] hub 1-0:1.0: USB hub found
[    0.676314] hub 1-0:1.0: 8 ports detected
[    0.676935] uhci_hcd: USB Universal Host Controller Interface driver
[    0.677002] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.677016] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.677060] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c800
[    0.677108] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.677111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.677113] usb usb2: Product: UHCI Host Controller
[    0.677116] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.677118] usb usb2: SerialNumber: 0000:00:10.0
[    0.677250] hub 2-0:1.0: USB hub found
[    0.677254] hub 2-0:1.0: 2 ports detected
[    0.677341] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.677350] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.677383] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c400
[    0.677424] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.677427] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.677430] usb usb3: Product: UHCI Host Controller
[    0.677432] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.677434] usb usb3: SerialNumber: 0000:00:10.1
[    0.677544] hub 3-0:1.0: USB hub found
[    0.677548] hub 3-0:1.0: 2 ports detected
[    0.677625] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.677633] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.677655] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[    0.677698] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.677701] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.677703] usb usb4: Product: UHCI Host Controller
[    0.677706] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.677708] usb usb4: SerialNumber: 0000:00:10.2
[    0.677812] hub 4-0:1.0: USB hub found
[    0.677816] hub 4-0:1.0: 2 ports detected
[    0.677890] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.677902] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.677935] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000b800
[    0.677974] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.677977] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.677980] usb usb5: Product: UHCI Host Controller
[    0.677982] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.677984] usb usb5: SerialNumber: 0000:00:10.3
[    0.678089] hub 5-0:1.0: USB hub found
[    0.678093] hub 5-0:1.0: 2 ports detected
[    0.683051] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    0.683619] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1b400, 00:18:f3:0c:8e:b1, IRQ 23
[    0.684338] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[    0.745943] libata version 3.00 loaded.
[    0.746310] sata_via 0000:00:0f.0: version 2.6
[    0.746373] sata_via 0000:00:0f.0: routed to hard irq line 5
[    0.749845] scsi0 : sata_via
[    0.755421] scsi1 : sata_via
[    0.756865] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 21
[    0.756869] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 21
[    0.757023] pata_via 0000:00:0f.1: version 0.3.4
[    0.760367] scsi2 : pata_via
[    0.764580] scsi3 : pata_via
[    0.766341] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.766345] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    0.964017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.982872] ata3.00: ATA-7: ST380215A, 3.AAD, max UDMA/100
[    0.982876] ata3.00: 156301488 sectors, multi 16: LBA48 
[    1.049414] ata3.00: configured for UDMA/100
[    1.143528] ata1.00: ATA-7: WDC WD2500AAJS-00RYA0, 12.01B01, max UDMA/133
[    1.143532] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.156553] ata1.00: configured for UDMA/133
[    1.156683] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-0 12.0 PQ: 0 ANSI: 5
[    1.172024] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    1.346102] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[    1.346105] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.346108] usb 2-1: Product: USB Optical Mouse
[    1.346110] usb 2-1: Manufacturer: PixArt
[    1.360018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.524313] ata2.00: ATA-7: SAMSUNG HD160JJ, ZM100-41, max UDMA7
[    1.524317] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.556296] ata2.00: configured for UDMA/133
[    1.556431] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
[    1.556732] scsi 2:0:0:0: Direct-Access     ATA      ST380215A        3.AA PQ: 0 ANSI: 5
[    1.755353] ata4.00: ATA-7: ST380215A, 3.AAD, max UDMA/100
[    1.755356] ata4.00: 156301488 sectors, multi 16: LBA48 
[    1.755363] ata4.01: ATAPI: HL-DT-STDVD-RAM GSA-H20L, 1.02, max UDMA/33
[    1.821975] ata4.00: configured for UDMA/100
[    1.836309] ata4.01: configured for UDMA/33
[    1.837684] scsi 3:0:0:0: Direct-Access     ATA      ST380215A        3.AA PQ: 0 ANSI: 5
[    1.839454] scsi 3:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H20L 1.02 PQ: 0 ANSI: 5
[    1.860822] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.860869] sd 0:0:0:0: [sda] Write Protect is off
[    1.860873] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.860892] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.861505] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.861547] sd 1:0:0:0: [sdb] Write Protect is off
[    1.861550] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.861569] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.862921] sd 2:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.862969] sd 2:0:0:0: [sdc] Write Protect is off
[    1.862972] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.862991] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.863800] sd 3:0:0:0: [sdd] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.863842] sd 3:0:0:0: [sdd] Write Protect is off
[    1.863845] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.863863] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.864914]  sda: sda1
[    1.865520] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input1
[    1.865672] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.865767] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:10.0-1/input0
[    1.865791] usbcore: registered new interface driver usbhid
[    1.865793] usbhid: USB HID core driver
[    1.872832]  sdb: sdb1
[    1.874556] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.875751] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.876225] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.876317] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.876391] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.876457] sr 3:0:1:0: Attached scsi generic sg4 type 5
[    1.886742]  sdd: sdd1
[    1.889922] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.889928] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.890396] sd 3:0:0:0: [sdd] Attached SCSI disk
[    1.890495] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    1.911983]  sdc: sdc1 sdc2 sdc3 sdc4
[    1.912521] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.532989] PM: Starting manual resume from disk
[    2.532995] PM: Hibernation image partition 8:36 present
[    2.532997] PM: Looking for hibernation image.
[    2.552623] PM: Image not found (code -22)
[    2.552625] PM: Hibernation image not present or could not be loaded.
[    2.598842] EXT4-fs (sdc2): INFO: recovery required on readonly filesystem
[    2.598847] EXT4-fs (sdc2): write access will be enabled during recovery
[    4.576975] EXT4-fs (sdc2): orphan cleanup on readonly fs
[    4.576987] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 1844377
[    4.577084] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 917872
[    4.577138] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 917864
[    4.577153] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 917869
[    4.577168] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 917876
[    4.577185] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 917868
[    4.577200] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 917596
[    4.577236] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 137662
[    4.577246] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 137661
[    4.577259] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 137648
[    4.577267] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 137629
[    4.577276] EXT4-fs (sdc2): ext4_orphan_cleanup: deleting unreferenced inode 131076
[    4.577284] EXT4-fs (sdc2): 12 orphan inodes deleted
[    4.577286] EXT4-fs (sdc2): recovery complete
[    4.659056] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[    6.544166] udevd[346]: starting version 175
[    7.308680] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.308690] ACPI: Power Button [PWRB]
[    7.308763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.308766] ACPI: Power Button [PWRF]
[    7.310745] ACPI: acpi_idle registered with cpuidle
[    7.702228] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.730253] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.957746] EDAC MC: Ver: 2.1.0
[    7.971403] MCE: In-kernel MCE decoding enabled.
[    7.972705] AMD64 EDAC driver v3.4.0
[    7.972752] EDAC amd64: DRAM ECC disabled.
[    7.972756] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    7.972758]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    7.972759]  (Note that use of the override may cause unknown side effects.)
[    8.013663] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ (1 cpu cores) (version 2.20.00)
[    8.013733] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[    8.013735] powernow-k8: fid 0xc (2000 MHz), vid 0x8
[    8.013738] powernow-k8: fid 0xa (1800 MHz), vid 0xa
[    8.013740] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[    8.057720] parport_pc 00:05: reported by Plug and Play ACPI
[    8.057828] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   10.078063] Adding 7789564k swap on /dev/sdc4.  Priority:-1 extents:1 across:7789564k 
[   10.111225] EXT4-fs (sdc2): re-mounted. Opts: (null)
[   10.576862] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
[   10.732138] loop: module loaded
[   12.492396] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.536617] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   12.655548] EXT4-fs (sdd1): recovery complete
[   12.655559] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[   12.751632] EXT4-fs (sdb1): recovery complete
[   12.751644] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro

Jest to zintegrowana z płytą karta sieciowa (przewodowa), do której nie instalował żadnych dodatkowych sterowników (korzystam z tych wbudowanych w system), która jeszcze kilka dni temu działała bez problemu.

[Rafal_F]

Co to za karta?
Podaj wyniki:

Kod: Zaznacz cały

lspci -n
lspci -k

Te logi z dmesg nic nie mówią, bo są to logi po restarcie. Tak samo plik /var/log/dmesg, jest to plik z aktualnym logiem, Ty musisz dostarczyć wcześniejszy log, z wcześniejszej sesji (wcześniejszego uruchomienia): /var/log/dmesg.1.gz, /var/log/dmesg.2.gz,... - im wyższy numer tym starszy log.

Próbowałeś zaktualizować jądro?

[harmichalh]

Log wrzucony w poprzednim poście jest logim polecenia, wpisanego na sprzętowej klawiaturze problematycznego komputera, kiedy problem występował - czyli jak sieć nie działała.

wynik lspci -n (kiedy sieć działa):

Kod: Zaznacz cały

00:00.0 0600: 1106:0336
00:00.1 0600: 1106:1336
00:00.2 0600: 1106:2336
00:00.3 0600: 1106:3336
00:00.4 0600: 1106:4336
00:00.5 0800: 1106:5336
00:00.6 0600: 1106:6290
00:00.7 0600: 1106:7336
00:01.0 0604: 1106:b188
00:02.0 0604: 1106:a238
00:03.0 0604: 1106:c238
00:0f.0 0101: 1106:0591 (rev 80)
00:0f.1 0101: 1106:0571 (rev 07)
00:10.0 0c03: 1106:3038 (rev a0)
00:10.1 0c03: 1106:3038 (rev a0)
00:10.2 0c03: 1106:3038 (rev a0)
00:10.3 0c03: 1106:3038 (rev a0)
00:10.4 0c03: 1106:3104 (rev 86)
00:11.0 0601: 1106:3337
00:11.7 0600: 1106:287e
00:12.0 0200: 1106:3065 (rev 7c)
00:13.0 0604: 1106:337b
00:13.1 0604: 1106:337a
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:00.0 0300: 1106:3230 (rev 11)

wynik lspci -k (kiedy sieć działa):

Kod: Zaznacz cały

00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
        Kernel driver in use: agpgart-amd64
00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
        Subsystem: Device 0008:0000
00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/8251 PCI bridge [K8M890/K8T800/K8T890 South]
00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
        Kernel driver in use: pcieport
00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
        Kernel driver in use: pcieport
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80)
        Subsystem: ASUSTeK Computer Inc. Device 81b5
        Kernel driver in use: sata_via
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
        Subsystem: ASUSTeK Computer Inc. Device 81b5
        Kernel driver in use: pata_via
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
        Kernel driver in use: uhci_hcd
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
        Kernel driver in use: uhci_hcd
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
        Kernel driver in use: uhci_hcd
00:10.3 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
        Kernel driver in use: uhci_hcd
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 86)
        Subsystem: VIA Technologies, Inc. USB 2.0
        Kernel driver in use: ehci_hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
        Subsystem: ASUSTeK Computer Inc. Device 81b5
00:11.7 Host bridge: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller
        Subsystem: VIA Technologies, Inc. Device 337e
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
        Subsystem: ASUSTeK Computer Inc. A7V600-X Motherboard
        Kernel driver in use: via-rhine
00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
        Kernel driver in use: k8temp
01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11)
        Subsystem: ASUSTeK Computer Inc. Device 81b5

Jądra nie aktualizowałem, bo na tym jądrze wcześniej problem nie występował (system instalowałem od zera, zaraz po wydaniu 7.4 i do teraz używam tej instalacji).

[Rafal_F]

W internecie można znaleźć wiele wątków z podobnymi problemami z tą kartą i wszystkie są bez rozwiązania.
https://www.google.pl/search?num=50&saf ... k-cjgVMBO4

Zaktualizuj jądro do wersji z backportów i sprawdź czy błąd występuje.

[harmichalh]

A jak zainstalować to jądro i do której wersji najlepiej?

[Rafal_F]

Uzupełnij repozytoria o backporty: threads/1408-Wpisy-w-pliku-etc-apt-sour ... #post10079
Korzysta się z tego w ten sposób:

Kod: Zaznacz cały

aptitude -t wheezy-backports install nazwa_pakietu

A co do wersji to najnowszą możliwą.