Kod: Zaznacz cały
[ 29.229]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 29.230] X Protocol Version 11, Revision 0
[ 29.230] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[ 29.230] Current Operating System: Linux Golima 3.13-1-amd64 #1 SMP Debian 3.13.10-1 (2014-04-15) x86_64
[ 29.230] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13-1-amd64 root=UUID=e13bc79c-1f71-4674-b070-160ab92304c7 ro quiet
[ 29.230] Build Date: 15 April 2014 06:58:36PM
[ 29.230] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 29.230] Current version of pixman: 0.32.4
[ 29.230] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29.230] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29.230] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 3 13:21:00 2014
[ 29.280] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 29.293] (==) No Layout section. Using the first Screen section.
[ 29.294] (==) No screen section available. Using defaults.
[ 29.294] (**) |-->Screen "Default Screen Section" (0)
[ 29.294] (**) | |-->Monitor "<default monitor>"
[ 29.303] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 29.304] (==) Automatically adding devices
[ 29.304] (==) Automatically enabling devices
[ 29.304] (==) Automatically adding GPU devices
[ 29.329] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 29.329] Entry deleted from font path.
[ 29.329] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 29.329] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 29.329] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 29.329] (II) Loader magic: 0x7fc0b875bd40
[ 29.329] (II) Module ABI versions:
[ 29.329] X.Org ANSI C Emulation: 0.4
[ 29.329] X.Org Video Driver: 15.0
[ 29.329] X.Org XInput driver : 20.0
[ 29.329] X.Org Server Extension : 8.0
[ 29.330] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 29.332] (--) PCI:*(0:0:2:0) 8086:0116:17aa:397d rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 29.345] Initializing built-in extension Generic Event Extension
[ 29.345] Initializing built-in extension SHAPE
[ 29.345] Initializing built-in extension MIT-SHM
[ 29.345] Initializing built-in extension XInputExtension
[ 29.345] Initializing built-in extension XTEST
[ 29.345] Initializing built-in extension BIG-REQUESTS
[ 29.345] Initializing built-in extension SYNC
[ 29.345] Initializing built-in extension XKEYBOARD
[ 29.345] Initializing built-in extension XC-MISC
[ 29.345] Initializing built-in extension SECURITY
[ 29.345] Initializing built-in extension XINERAMA
[ 29.345] Initializing built-in extension XFIXES
[ 29.345] Initializing built-in extension RENDER
[ 29.345] Initializing built-in extension RANDR
[ 29.345] Initializing built-in extension COMPOSITE
[ 29.345] Initializing built-in extension DAMAGE
[ 29.345] Initializing built-in extension MIT-SCREEN-SAVER
[ 29.345] Initializing built-in extension DOUBLE-BUFFER
[ 29.345] Initializing built-in extension RECORD
[ 29.345] Initializing built-in extension DPMS
[ 29.345] Initializing built-in extension Present
[ 29.345] Initializing built-in extension DRI3
[ 29.345] Initializing built-in extension X-Resource
[ 29.345] Initializing built-in extension XVideo
[ 29.345] Initializing built-in extension XVideo-MotionCompensation
[ 29.345] Initializing built-in extension SELinux
[ 29.345] Initializing built-in extension XFree86-VidModeExtension
[ 29.345] Initializing built-in extension XFree86-DGA
[ 29.345] Initializing built-in extension XFree86-DRI
[ 29.345] Initializing built-in extension DRI2
[ 29.345] (II) LoadModule: "glx"
[ 29.372] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.434] (II) Module glx: vendor="X.Org Foundation"
[ 29.434] compiled for 1.15.1, module version = 1.0.0
[ 29.434] ABI class: X.Org Server Extension, version 8.0
[ 29.434] (==) AIGLX enabled
[ 29.434] Loading extension GLX
[ 29.434] (==) Matched intel as autoconfigured driver 0
[ 29.434] (==) Matched intel as autoconfigured driver 1
[ 29.434] (==) Matched modesetting as autoconfigured driver 2
[ 29.434] (==) Matched fbdev as autoconfigured driver 3
[ 29.434] (==) Matched vesa as autoconfigured driver 4
[ 29.434] (==) Assigned the driver to the xf86ConfigLayout
[ 29.434] (II) LoadModule: "intel"
[ 29.448] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.509] (II) Module intel: vendor="X.Org Foundation"
[ 29.509] compiled for 1.15.0, module version = 2.21.15
[ 29.509] Module class: X.Org Video Driver
[ 29.509] ABI class: X.Org Video Driver, version 15.0
[ 29.509] (II) LoadModule: "modesetting"
[ 29.509] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 29.514] (II) Module modesetting: vendor="X.Org Foundation"
[ 29.514] compiled for 1.15.0, module version = 0.8.1
[ 29.514] Module class: X.Org Video Driver
[ 29.514] ABI class: X.Org Video Driver, version 15.0
[ 29.514] (II) LoadModule: "fbdev"
[ 29.514] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 29.525] (II) Module fbdev: vendor="X.Org Foundation"
[ 29.526] compiled for 1.15.0, module version = 0.4.4
[ 29.526] Module class: X.Org Video Driver
[ 29.526] ABI class: X.Org Video Driver, version 15.0
[ 29.526] (II) LoadModule: "vesa"
[ 29.526] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 29.562] (II) Module vesa: vendor="X.Org Foundation"
[ 29.562] compiled for 1.15.0, module version = 2.3.3
[ 29.562] Module class: X.Org Video Driver
[ 29.562] ABI class: X.Org Video Driver, version 15.0
[ 29.562] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 29.563] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 29.563] (II) FBDEV: driver for framebuffer: fbdev
[ 29.563] (II) VESA: driver for VESA chipsets: vesa
[ 29.563] (++) using VT number 7
[ 29.583] (WW) Falling back to old probe method for modesetting
[ 29.584] (WW) Falling back to old probe method for fbdev
[ 29.584] (II) Loading sub module "fbdevhw"
[ 29.584] (II) LoadModule: "fbdevhw"
[ 29.584] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 29.608] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 29.608] compiled for 1.15.1, module version = 0.0.2
[ 29.608] ABI class: X.Org Video Driver, version 15.0
[ 29.608] (WW) Falling back to old probe method for vesa
[ 29.608] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.608] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 29.608] (==) intel(0): RGB weight 888
[ 29.608] (==) intel(0): Default visual is TrueColor
[ 29.608] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 29.608] (**) intel(0): Relaxed fencing enabled
[ 29.608] (**) intel(0): Wait on SwapBuffers? enabled
[ 29.608] (**) intel(0): Triple buffering? enabled
[ 29.608] (**) intel(0): Framebuffer tiled
[ 29.608] (**) intel(0): Pixmaps tiled
[ 29.608] (**) intel(0): 3D buffers tiled
[ 29.608] (**) intel(0): SwapBuffers wait enabled
[ 29.608] (==) intel(0): video overlay key set to 0x101fe
[ 29.608] (II) intel(0): Output LVDS1 has no monitor section
[ 29.609] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 29.610] (II) intel(0): Output VGA1 has no monitor section
[ 29.610] (II) intel(0): Output HDMI1 has no monitor section
[ 29.610] (II) intel(0): Output DP1 has no monitor section
[ 29.610] (II) intel(0): EDID for output LVDS1
[ 29.610] (II) intel(0): Manufacturer: SEC Model: 4252 Serial#: 0
[ 29.610] (II) intel(0): Year: 2010 Week: 0
[ 29.610] (II) intel(0): EDID Version: 1.3
[ 29.610] (II) intel(0): Digital Display Input
[ 29.610] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 29.610] (II) intel(0): Gamma: 2.20
[ 29.610] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 29.610] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 29.610] (II) intel(0): First detailed timing is preferred mode
[ 29.610] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 29.610] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 29.610] (II) intel(0): Manufacturer's mask: 0
[ 29.610] (II) intel(0): Supported detailed timing:
[ 29.610] (II) intel(0): clock: 74.8 MHz Image Size: 344 x 194 mm
[ 29.610] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1578 h_border: 0
[ 29.611] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 29.611] (II) intel(0): Unknown vendor-specific block f
[ 29.611] (II) intel(0): SAMSUNG
[ 29.611] (II) intel(0): LTN156AT24L01
[ 29.611] (II) intel(0): EDID (in hex):
[ 29.611] (II) intel(0): 00ffffffffffff004ca3524200000000
[ 29.611] (II) intel(0): 0014010380221378eac8959e57549226
[ 29.611] (II) intel(0): 0f505400000001010101010101010101
[ 29.611] (II) intel(0): 010101010101381d56d4500016303020
[ 29.611] (II) intel(0): 250058c2100000190000000f00000000
[ 29.611] (II) intel(0): 000000000025d9066a00000000fe0053
[ 29.611] (II) intel(0): 414d53554e470a204ca34154000000fe
[ 29.611] (II) intel(0): 004c544e313536415432344c303100ef
[ 29.611] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 29.611] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 29.611] (II) intel(0): Printing probed modes for output LVDS1
[ 29.611] (II) intel(0): Modeline "1366x768"x60.0 74.80 1366 1414 1446 1578 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 29.611] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 29.611] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 29.611] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 29.611] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 29.611] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 29.611] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 29.612] (II) intel(0): EDID for output VGA1
[ 29.613] (II) intel(0): EDID for output HDMI1
[ 29.613] (II) intel(0): EDID for output DP1
[ 29.613] (II) intel(0): Output LVDS1 connected
[ 29.613] (II) intel(0): Output VGA1 disconnected
[ 29.613] (II) intel(0): Output HDMI1 disconnected
[ 29.613] (II) intel(0): Output DP1 disconnected
[ 29.613] (II) intel(0): Using exact sizes for initial modes
[ 29.613] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 29.613] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.613] (II) intel(0): Kernel page flipping support detected, enabling
[ 29.613] (==) intel(0): DPI set to (96, 96)
[ 29.613] (II) Loading sub module "fb"
[ 29.613] (II) LoadModule: "fb"
[ 29.613] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.653] (II) Module fb: vendor="X.Org Foundation"
[ 29.653] compiled for 1.15.1, module version = 1.0.0
[ 29.653] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.653] (II) Loading sub module "dri2"
[ 29.653] (II) LoadModule: "dri2"
[ 29.653] (II) Module "dri2" already built-in
[ 29.653] (II) UnloadModule: "modesetting"
[ 29.653] (II) Unloading modesetting
[ 29.653] (II) UnloadModule: "fbdev"
[ 29.653] (II) Unloading fbdev
[ 29.653] (II) UnloadSubModule: "fbdevhw"
[ 29.653] (II) Unloading fbdevhw
[ 29.654] (II) UnloadModule: "vesa"
[ 29.654] (II) Unloading vesa
[ 29.654] (==) Depth 24 pixmap format is 32 bpp
[ 29.677] (II) intel(0): [DRI2] Setup complete
[ 29.678] (II) intel(0): [DRI2] DRI driver: i965
[ 29.678] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 29.696] (II) UXA(0): Driver registered support for the following operations:
[ 29.696] (II) solid
[ 29.696] (II) copy
[ 29.696] (II) composite (RENDER acceleration)
[ 29.696] (II) put_image
[ 29.696] (II) get_image
[ 29.696] (==) intel(0): Backing store enabled
[ 29.696] (==) intel(0): Silken mouse enabled
[ 29.700] (II) intel(0): Initializing HW Cursor
[ 29.700] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.707] (==) intel(0): DPMS enabled
[ 29.707] (==) intel(0): Intel XvMC decoder enabled
[ 29.707] (II) intel(0): Set up textured video
[ 29.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 29.707] (II) intel(0): direct rendering: DRI2 Enabled
[ 29.708] (==) intel(0): hotplug detection: "enabled"
[ 29.728] (--) RandR disabled
[ 29.762] (II) SELinux: Disabled on system
[ 30.126] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.126] (II) AIGLX: enabled GLX_ARB_create_context
[ 30.126] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 30.126] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 30.126] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.126] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.126] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 30.126] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 30.126] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.126] (II) AIGLX: Loaded and initialized i965
[ 30.126] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.127] (II) intel(0): Setting screen physical size to 361 x 203
[ 30.390] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 30.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.390] (II) LoadModule: "evdev"
[ 30.391] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.408] (II) Module evdev: vendor="X.Org Foundation"
[ 30.408] compiled for 1.15.0, module version = 2.8.2
[ 30.408] Module class: X.Org XInput Driver
[ 30.408] ABI class: X.Org XInput driver, version 20.0
[ 30.408] (II) Using input driver 'evdev' for 'Power Button'
[ 30.408] (**) Power Button: always reports core events
[ 30.408] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 30.408] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.408] (--) evdev: Power Button: Found keys
[ 30.408] (II) evdev: Power Button: Configuring as keyboard
[ 30.409] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[ 30.409] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.409] (**) Option "xkb_rules" "evdev"
[ 30.409] (**) Option "xkb_model" "pc105"
[ 30.409] (**) Option "xkb_layout" "pl"
[ 30.439] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 30.439] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.439] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.439] (**) Video Bus: always reports core events
[ 30.439] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 30.439] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.439] (--) evdev: Video Bus: Found keys
[ 30.439] (II) evdev: Video Bus: Configuring as keyboard
[ 30.439] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event14"
[ 30.439] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.439] (**) Option "xkb_rules" "evdev"
[ 30.439] (**) Option "xkb_model" "pc105"
[ 30.439] (**) Option "xkb_layout" "pl"
[ 30.439] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 30.439] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.439] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.439] (**) Video Bus: always reports core events
[ 30.439] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 30.439] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.439] (--) evdev: Video Bus: Found keys
[ 30.439] (II) evdev: Video Bus: Configuring as keyboard
[ 30.439] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input14/event13"
[ 30.439] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 30.439] (**) Option "xkb_rules" "evdev"
[ 30.439] (**) Option "xkb_model" "pc105"
[ 30.440] (**) Option "xkb_layout" "pl"
[ 30.440] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 30.440] (II) No input driver specified, ignoring this device.
[ 30.440] (II) This device may have been added with another device file.
[ 30.440] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 30.440] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.440] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.440] (**) Sleep Button: always reports core events
[ 30.440] (**) evdev: Sleep Button: Device: "/dev/input/event6"
[ 30.440] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 30.440] (--) evdev: Sleep Button: Found keys
[ 30.440] (II) evdev: Sleep Button: Configuring as keyboard
[ 30.440] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7/event6"
[ 30.441] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 30.441] (**) Option "xkb_rules" "evdev"
[ 30.441] (**) Option "xkb_model" "pc105"
[ 30.441] (**) Option "xkb_layout" "pl"
[ 30.441] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 30.441] (II) config/udev: Adding input device 2.4GRF Mouse (/dev/input/event1)
[ 30.441] (**) 2.4GRF Mouse: Applying InputClass "evdev pointer catchall"
[ 30.441] (II) Using input driver 'evdev' for '2.4GRF Mouse'
[ 30.441] (**) 2.4GRF Mouse: always reports core events
[ 30.441] (**) evdev: 2.4GRF Mouse: Device: "/dev/input/event1"
[ 30.441] (--) evdev: 2.4GRF Mouse: Vendor 0x4f3 Product 0xa3
[ 30.441] (--) evdev: 2.4GRF Mouse: Found 9 mouse buttons
[ 30.441] (--) evdev: 2.4GRF Mouse: Found scroll wheel(s)
[ 30.441] (--) evdev: 2.4GRF Mouse: Found relative axes
[ 30.442] (--) evdev: 2.4GRF Mouse: Found x and y relative axes
[ 30.442] (II) evdev: 2.4GRF Mouse: Configuring as mouse
[ 30.442] (II) evdev: 2.4GRF Mouse: Adding scrollwheel support
[ 30.442] (**) evdev: 2.4GRF Mouse: YAxisMapping: buttons 4 and 5
[ 30.442] (**) evdev: 2.4GRF Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.442] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2/event1"
[ 30.442] (II) XINPUT: Adding extended input device "2.4GRF Mouse" (type: MOUSE, id 10)
[ 30.442] (II) evdev: 2.4GRF Mouse: initialized for relative axes.
[ 30.442] (**) 2.4GRF Mouse: (accel) keeping acceleration scheme 1
[ 30.442] (**) 2.4GRF Mouse: (accel) acceleration profile 0
[ 30.442] (**) 2.4GRF Mouse: (accel) acceleration factor: 2.000
[ 30.442] (**) 2.4GRF Mouse: (accel) acceleration threshold: 4
[ 30.442] (II) config/udev: Adding input device 2.4GRF Mouse (/dev/input/mouse0)
[ 30.442] (II) No input driver specified, ignoring this device.
[ 30.442] (II) This device may have been added with another device file.
[ 30.443] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event11)
[ 30.443] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 30.443] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 30.443] (**) Lenovo EasyCamera: always reports core events
[ 30.443] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event11"
[ 30.443] (--) evdev: Lenovo EasyCamera: Vendor 0x5986 Product 0x364
[ 30.443] (--) evdev: Lenovo EasyCamera: Found keys
[ 30.443] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 30.443] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input13/event11"
[ 30.443] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[ 30.443] (**) Option "xkb_rules" "evdev"
[ 30.443] (**) Option "xkb_model" "pc105"
[ 30.443] (**) Option "xkb_layout" "pl"
[ 30.443] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event4)
[ 30.443] (II) No input driver specified, ignoring this device.
[ 30.443] (II) This device may have been added with another device file.
[ 30.444] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event3)
[ 30.444] (II) No input driver specified, ignoring this device.
[ 30.444] (II) This device may have been added with another device file.
[ 30.444] (II) config/udev: Adding input device HDA Intel PCH HDMI (/dev/input/event2)
[ 30.444] (II) No input driver specified, ignoring this device.
[ 30.444] (II) This device may have been added with another device file.
[ 30.444] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event9)
[ 30.444] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.444] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 30.444] (**) Ideapad extra buttons: always reports core events
[ 30.444] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event9"
[ 30.444] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 30.444] (--) evdev: Ideapad extra buttons: Found keys
[ 30.444] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 30.444] (**) Option "config_info" "udev:/sys/devices/platform/VPC2004:00/input/input11/event9"
[ 30.444] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[ 30.444] (**) Option "xkb_rules" "evdev"
[ 30.444] (**) Option "xkb_model" "pc105"
[ 30.444] (**) Option "xkb_layout" "pl"
[ 30.445] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.445] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.445] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.445] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.445] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.445] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.445] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.445] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.445] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.445] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 30.445] (**) Option "xkb_rules" "evdev"
[ 30.445] (**) Option "xkb_model" "pc105"
[ 30.445] (**) Option "xkb_layout" "pl"
[ 30.445] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[ 30.445] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 30.445] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 30.445] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 30.446] (II) LoadModule: "synaptics"
[ 30.446] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.459] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.459] compiled for 1.15.0, module version = 1.7.3
[ 30.459] Module class: X.Org XInput Driver
[ 30.459] ABI class: X.Org XInput driver, version 20.0
[ 30.459] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 30.459] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.459] (**) Option "Device" "/dev/input/event12"
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2934 (res 0)
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1304 (res 0)
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 30.620] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 30.620] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 30.676] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event12"
[ 30.676] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 30.676] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.676] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 30.676] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.062
[ 30.677] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 30.677] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 30.677] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 30.677] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 30.677] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 30.677] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 30.677] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 30.678] (II) No input driver specified, ignoring this device.
[ 30.678] (II) This device may have been added with another device file.
[ 30.678] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event10)
[ 30.678] (II) No input driver specified, ignoring this device.
[ 30.678] (II) This device may have been added with another device file.
[ 30.679] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 30.679] (II) No input driver specified, ignoring this device.
[ 30.679] (II) This device may have been added with another device file.
[ 42.279] (II) intel(0): EDID vendor "SEC", prod id 16978
[ 42.279] (II) intel(0): Printing DDC gathered Modelines:
[ 42.279] (II) intel(0): Modeline "1366x768"x0.0 74.80 1366 1414 1446 1578 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 42.281] (II) intel(0): EDID vendor "SEC", prod id 16978
[ 42.281] (II) intel(0): Printing DDC gathered Modelines:
[ 42.281] (II) intel(0): Modeline "1366x768"x0.0 74.80 1366 1414 1446 1578 768 770 775 790 -hsync -vsync (47.4 kHz eP)
A teraz rozumiem. optirun służy do włączania aplikacji przy użyciu nvidii.
No to zadziałało polecenie. Z początku miałem error, ale później mała edycja konfiga zgodnie z instrukcją i zadziałało
Sprawdź jeszcze ten log i fajnie by było, żebyś nakreślił dokładniej czego tam szukasz, a ja wtedy powalczy z zarządzaniem mocą.
