Polskie Forum Użytkowników Debiana

Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://593930.wb34atkl.asia/

KDE4 - przeźroczysto

https://593930.wb34atkl.asia/viewtopic.php?t=11763

Strona 1 z 1

KDE4 - przeźroczystość i efekty - Debian Sid i ATI X1300

: 03 lutego 2009, 13:13
autor: petrol
Witam.
Mam pewien problem z konfiguracja efektów na KDE4 (z experimantal).
Mianowicie wyrzuca mi takie coś:
System Settings pisze:Failed to activate desktop effects using the given configuration options. Settings will be reverted to their previous values.

Check your X configuration. You may also consider changing advanced options, especially changing the compositing type.
Skonfigurowałem xy komendą

Kod: Zaznacz cały

X -configure
jak to było napisane w jednym temacie http://debian.linux.pl/viewtopic.php?t=8847
Oto efekt:

Kod: Zaznacz cały

root@PETROL-PC:~# cat /etc/X11/xorg.conf
Section "ServerLayout"                             
        Identifier     "X.org Configured"          
        Screen      0  "Screen0" 0 0               
        InputDevice    "Mouse0" "CorePointer"      
        InputDevice    "Keyboard0" "CoreKeyboard"  
EndSection                                         

Section "Files"
        RgbPath      "/etc/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled" 
        FontPath     "/usr/share/fonts/X11/Type1"           
        FontPath     "/usr/share/fonts/X11/100dpi"          
        FontPath     "/usr/share/fonts/X11/75dpi"           
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection                                                             

Section "Module"
        Load  "GLcore"
        Load  "dbe"   
        Load  "dri"   
        Load  "extmod"
        Load  "glx"   
        Load  "record"
        Load  "xtrap" 
EndSection            

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"      
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "pl"  
EndSection                            

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse" 
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"  
EndSection                                    

Section "Monitor"
        #DisplaySize      380   300     # mm
        Identifier   "Monitor0"             
        VendorName   "SAM"                  
        ModelName    "SyncMaster"           
 ### Comment all HorizSync and VertRefresh values to use DDC:
        HorizSync    30.0 - 81.0                             
        VertRefresh  56.0 - 75.0                             
        Option      "DPMS"                                   
EndSection                                                   

Section "Device"
        ### Available Driver options are:-
        ### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"             
        ### [arg]: arg optional                                      
        #Option     "NoAccel"                   # [<bool>]           
        #Option     "SWcursor"                  # [<bool>]           
        #Option     "Dac6Bit"                   # [<bool>]           
        #Option     "Dac8Bit"                   # [<bool>]           
        #Option     "BusType"                   # [<str>]            
        #Option     "CPPIOMode"                 # [<bool>]           
        #Option     "CPusecTimeout"             # [i]                
        #Option     "AGPMode"                   # [i]                
        #Option     "AGPFastWrite"              # [<bool>]           
        #Option     "AGPSize"                   # [i]                
        #Option     "GARTSize"                  # [i]                
        #Option     "RingSize"                  # [i]                
        #Option     "BufferSize"                # [i]                
        #Option     "EnableDepthMoves"          # [<bool>]           
        #Option     "EnablePageFlip"            # [<bool>]           
        #Option     "NoBackBuffer"              # [<bool>]           
        #Option     "DMAForXv"                  # [<bool>]           
        #Option     "FBTexPercent"              # [i]                
        #Option     "DepthBits"                 # [i]                
        #Option     "PCIAPERSize"               # [i]                
        #Option     "AccelDFS"                  # [<bool>]           
        #Option     "DDCMode"                   # [<bool>]           
        #Option     "IgnoreEDID"                # [<bool>]           
        #Option     "DisplayPriority"           # [<str>]            
        #Option     "PanelSize"                 # [<str>]            
        #Option     "ForceMinDotClock"          # <freq>             
        #Option     "ColorTiling"               # [<bool>]           
        #Option     "VideoKey"                  # [i]                
        #Option     "RageTheatreCrystal"        # [i]                
        #Option     "RageTheatreTunerPort"      # [i]                
        #Option     "RageTheatreCompositePort"  # [i]                
        #Option     "RageTheatreSVideoPort"     # [i]                
        #Option     "TunerType"                 # [i]                
        #Option     "RageTheatreMicrocPath"     # <str>              
        #Option     "RageTheatreMicrocType"     # <str>              
        #Option     "ScalerWidth"               # [i]                
        #Option     "RenderAccel"               # [<bool>]           
        #Option     "SubPixelOrder"             # [<str>]            
        #Option     "ShowCache"                 # [<bool>]           
        #Option     "DynamicClocks"             # [<bool>]           
        #Option     "VGAAccess"                 # [<bool>]           
        #Option     "ReverseDDC"                # [<bool>]           
        #Option     "LVDSProbePLL"              # [<bool>]           
        #Option     "AccelMethod"               # <str>              
        #Option     "DRI"                       # [<bool>]           
        #Option     "ConnectorTable"            # <str>              
        #Option     "DefaultConnectorTable"     # [<bool>]           
        #Option     "DefaultTMDSPLL"            # [<bool>]           
        #Option     "TVDACLoadDetect"           # [<bool>]           
        #Option     "ForceTVOut"                # [<bool>]           
        #Option     "TVStandard"                # <str>              
        #Option     "IgnoreLidStatus"           # [<bool>]           
        #Option     "DefaultTVDACAdj"           # [<bool>]           
        #Option     "Int10"                     # [<bool>]           
        Identifier  "Card0"                                          
        Driver      "radeon"                                         
        VendorName  "ATI Technologies Inc"                           
        BoardName   "RV515 [Radeon X1300]"                           
        BusID       "PCI:1:0:0"                                      
EndSection                                                           

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"  
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection
To działała jednak przy próbie włączenia efektów efekt jest ten sam.

Użyłem metody Kaki http://debian.linux.pl/viewtopic.php?t=665 na włączanie przeźroczystości.
Oto plik:

Kod: Zaznacz cały

petrol@PETROL-PC:~$ cat /etc/X11/xorg.conf.error
Section "ServerLayout"                          
        Identifier     "X.org Configured"       
        Screen      0  "Screen0" 0 0            
        InputDevice    "Mouse0" "CorePointer"   
        InputDevice    "Keyboard0" "CoreKeyboard"
        Option          "AIGLX" "true"           
EndSection                                       

Section "Files"
        RgbPath      "/etc/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled" 
        FontPath     "/usr/share/fonts/X11/Type1"           
        FontPath     "/usr/share/fonts/X11/100dpi"          
        FontPath     "/usr/share/fonts/X11/75dpi"           
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection                                                             

Section "Module"
        Load  "GLcore"
        Load  "dbe"   
        Load  "dri"   
        Load  "extmod"
        Load  "glx"   
        Load  "record"
        Load  "xtrap" 
EndSection            

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"      
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "pl"  
EndSection                            

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse" 
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"  
EndSection                                    

Section "Monitor"
        #DisplaySize      380   300     # mm
        Identifier   "Monitor0"             
        VendorName   "SAM"                  
        ModelName    "SyncMaster"           
 ### Comment all HorizSync and VertRefresh values to use DDC:
        HorizSync    30.0 - 81.0                             
        VertRefresh  56.0 - 75.0                             
        Option      "DPMS"                                   
EndSection                                                   

Section "Device"
        ### Available Driver options are:-
        ### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"             
        ### [arg]: arg optional                                      
        #Option     "NoAccel"                   # [<bool>]           
        #Option     "SWcursor"                  # [<bool>]           
        #Option     "Dac6Bit"                   # [<bool>]           
        #Option     "Dac8Bit"                   # [<bool>]           
        #Option     "BusType"                   # [<str>]            
        #Option     "CPPIOMode"                 # [<bool>]           
        #Option     "CPusecTimeout"             # [i]                
        #Option     "AGPMode"                   # [i]                
        #Option     "AGPFastWrite"              # [<bool>]           
        #Option     "AGPSize"                   # [i]                
        #Option     "GARTSize"                  # [i]                
        #Option     "RingSize"                  # [i]                
        #Option     "BufferSize"                # [i]                
        #Option     "EnableDepthMoves"          # [<bool>]           
        #Option     "EnablePageFlip"            # [<bool>]           
        #Option     "NoBackBuffer"              # [<bool>]           
        #Option     "DMAForXv"                  # [<bool>]           
        #Option     "FBTexPercent"              # [i]                
        #Option     "DepthBits"                 # [i]                
        #Option     "PCIAPERSize"               # [i]                
        #Option     "AccelDFS"                  # [<bool>]           
        #Option     "DDCMode"                   # [<bool>]           
        #Option     "IgnoreEDID"                # [<bool>]           
        #Option     "DisplayPriority"           # [<str>]            
        #Option     "PanelSize"                 # [<str>]            
        #Option     "ForceMinDotClock"          # <freq>             
        #Option     "ColorTiling"               # [<bool>]           
        #Option     "VideoKey"                  # [i]                
        #Option     "RageTheatreCrystal"        # [i]                
        #Option     "RageTheatreTunerPort"      # [i]                
        #Option     "RageTheatreCompositePort"  # [i]                
        #Option     "RageTheatreSVideoPort"     # [i]                
        #Option     "TunerType"                 # [i]                
        #Option     "RageTheatreMicrocPath"     # <str>              
        #Option     "RageTheatreMicrocType"     # <str>              
        #Option     "ScalerWidth"               # [i]                
        #Option     "RenderAccel"               # [<bool>]           
        #Option     "SubPixelOrder"             # [<str>]            
        #Option     "ShowCache"                 # [<bool>]           
        #Option     "DynamicClocks"             # [<bool>]           
        #Option     "VGAAccess"                 # [<bool>]           
        #Option     "ReverseDDC"                # [<bool>]           
        #Option     "LVDSProbePLL"              # [<bool>]           
        #Option     "AccelMethod"               # <str>              
        #Option     "DRI"                       # [<bool>]           
        #Option     "ConnectorTable"            # <str>              
        #Option     "DefaultConnectorTable"     # [<bool>]           
        #Option     "DefaultTMDSPLL"            # [<bool>]           
        #Option     "TVDACLoadDetect"           # [<bool>]           
        #Option     "ForceTVOut"                # [<bool>]           
        #Option     "TVStandard"                # <str>              
        #Option     "IgnoreLidStatus"           # [<bool>]           
        #Option     "DefaultTVDACAdj"           # [<bool>]           
        #Option     "Int10"                     # [<bool>]           
        Identifier  "Card0"                                          
        #####Driver      "fglrx"
        Driver         "ati"                                       
        VendorName  "ATI Technologies Inc"                           
        BoardName   "RV515 [Radeon X1300]"                           
        BusID       "PCI:1:0:0"                                      
        Option      "AddARGBGLXVisuals" "On"                         
        Option      "XAANoOffscreenPixmaps" "true"                   
        Option      "RenderAccel" "true"                             
EndSection                                                           

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"  
        Monitor    "Monitor0"
        SubSection "Display" 
                Viewport   0 0
                Depth     1   
        EndSubSection         
        SubSection "Display"  
                Viewport   0 0
                Depth     4   
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "Extensions"
        Option "Composite" "Enable"
        Option "RENDER" "Enable"
EndSection

Section "DRI"
        Mode 0666
EndSection
Jednak to spowodowało wywalenie się xów (gdzie sie patrzyło na logi).

Chcę włączyć przeźroczystość i mam z tym problem. Proszę o pomoc i wskazanie błędu jaki popełniam oraz nakierowanie mnie na właściwy tor konfiguracji.

MAM!
sterowniki wolne to "ati" a ja myślałem inaczej... jak sprawdzę to podam wam informacje

: 03 lutego 2009, 16:02
autor: wieszti
Witam wszystkich, jako że to mój pierwszy post

Mnie udało się odpalić efekty aby za zamkniętych sterownikach tzn fglrx, jak będę miał czas to pobawię się z tym na otwartych.

Musisz ściągnąć sterowniki ze strony ati (http://ati.amd.com/support/driver.HTML), nadać im prawo wykonywalności przez ,,chmod +x'' i odpalić. Potem wystarczy wygenerować config Xorg:

Kod: Zaznacz cały

aticonfig --initial

: 03 lutego 2009, 16:09
autor: petrol
Po wygenerowaniu sam zmieniłem na niewolne.

[Dodano: 2009-02-03, 16:44
Niestety to poprawienie tego nic nie dało tylko tyle że wstaje.

[Dodano: 2009-02-03, 16:49]
Spróbuję Twojej metody.

[Dodano: 2009-02-03, 17:31]
Niestety nie działa. Teraz jak to usunąć?

[Dodano: 2009-02-03, 17:33]
Samo się usunęło.

: 03 lutego 2009, 18:09
autor: wieszti
Musi działać bo mam identyczną kartę i wszystkie efekty z Kwin śmigają elegancko :-)

Zainstalowałeś sterowniki? Napisz co zrobiłeś, podaj co wypisuje

Kod: Zaznacz cały

glxinfo

: 03 lutego 2009, 20:41
autor: petrol
Powaliłem Xy :)
Po tym jak usunąłem te niewolne sterowniki to mi w ogóle się nie uruchamia na żadnych configach, leży jak zabity. Znaczy się wstaje mryga i pada, a w konsoli wypisuje, że to nie ,,fatall error''.

: 03 lutego 2009, 20:49
autor: wieszti
To nie dobrze jak nie staje...
Zainstaluj sterowniki z repozytorium, tylko musisz mieć wpisy w /etc/apt/sources.lst odnośnie non-free

Kod: Zaznacz cały

aptitude install fglrx-driver
potem:

Kod: Zaznacz cały

aticonfig --initial -f

: 05 lutego 2009, 18:20
autor: petrol
Po kilku rozmowach i lekkiej lekturze doszedłem do wniosku że lepiej nie instalować niewolnych sterowników. Argumentowano mi tym że te wolne rozwijają się lepiej i łatwiej dostać pomoc w ich sprawie. Dlatego proszę jak w temacie równoległym http://forum.kde.org.pl/viewtopic.php?pid=7471 o pomoc.

[ Dodano: 2009-02-07, 14:57 ]
Kolejna próba na non-free tym razem z repów

[ Dodano: 2009-02-07, 15:19 ]
Wyszło tak:

przy takich ustawieniach:

Kod: Zaznacz cały

$cat /etc/X11/xorg.conf
Section "ServerLayout" 
        Identifier     "X.org Configured"
        Screen      0  "aticonfig-Screen[0]-0" 0 0
        InputDevice    "Mouse0" "CorePointer"     
        InputDevice    "Keyboard0" "CoreKeyboard" 
EndSection                                        

Section "Files"
        RgbPath      "/etc/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled" 
        FontPath     "/usr/share/fonts/X11/Type1"           
        FontPath     "/usr/share/fonts/X11/100dpi"          
        FontPath     "/usr/share/fonts/X11/75dpi"           
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection                                                             

Section "Module"
        Load  "GLcore"
        Load  "dbe"   
        Load  "dri"   
        Load  "extmod"
        Load  "glx"   
        Load  "record"
        Load  "xtrap" 
EndSection            

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"      
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "pl"  
EndSection                            

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse" 
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"  
EndSection                                    

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]-0"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]-0"
        Option      "DRI" "True"
        Driver      "fglrx"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]-0"
        Device     "aticonfig-Device[0]-0"
        Monitor    "aticonfig-Monitor[0]-0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection
$glxinfo pisze:
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_create_context, GLX_ARB_get_proc_address, GLX_ARB_multisample,
GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_MESA_allocate_memory, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_NV_swap_group, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_swap_barrier, GLX_SGIX_swap_group,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_swap_barrier, GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: http://www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.4)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_draw_buffers, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square,
GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite,
GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x3d 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon
nie wiem co zrobić z tym fantem (czyli jak włączyć DRI)
Strefa czasowa UTC+01:00
Strona 1 z 1

Technologię dostarcza phpBB® Forum Software © phpBB Limited

Polski pakiet językowy dostarcza phpBB.pl