Polskie Forum Użytkowników Debiana

Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://593930.wb34atkl.asia/

£adowanie modu

https://593930.wb34atkl.asia/viewtopic.php?t=16354

Strona 1 z 2

£adowanie modułów Xorga

: 21 listopada 2009, 16:24
autor: Quirel
Witam!
Wszystko zaczęło się od wkurzającego migania Conky po jakieś z aktualizacji (wersja testowa), gdzie wcześniej wszystko było ok.
Dziś mając chwilę wolnego czasu, zacząłem szukać powodu takiego zachowania conky i doszedłem do wniosku, iż nie działa "podwójne buforowanie" (double buffering). Po nitce do kłębka doszedłem do wniosku, iż problem leży w konfiguracji Xorga. Zacząłem więc przeglądać logi i zawartość tegoż (dotyczącego xorga) mnie zdziwiła:

Kod: Zaznacz cały

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-2-amd64 x86_64 Debian
Current Operating System: Linux Laptop 2.6.30-2-amd64 #1 SMP Fri Sep 25 22:16:56 UTC 2009 x86_64
Build Date: 13 October 2009  09:39:10AM
xorg-server 2:1.6.5-1 ([email protected]) 
	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 21 15:21:30 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(**) Extension "RENDER" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x3b40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0425:1043:826c nVidia Corporation G86 [GeForce 8600M GS] rev 161, Mem @ 0xf7000000/16777216, 0xc0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
[b](II) "dbe" will be loaded. This was enabled by default and also specified in the config file.[/b]
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
[b](II) LoadModule: "dbe"
(WW) Warning, couldn't open module dbe
(II) UnloadModule: "dbe"
(EE) Failed to load module "dbe" (module does not exist, 0)[/b]
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.42  Tue Oct 20 21:19:30 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
[b](WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "extmod"
(WW) Warning, couldn't open module extmod
(II) UnloadModule: "extmod"
(EE) Failed to load module "extmod" (module does not exist, 0)
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)[/b]
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  190.42  Tue Oct 20 20:42:04 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "TV: nvidia-auto-select +1280+0, DFP: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "TV-0"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "true"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) Nov 21 15:21:32 NVIDIA(0): Enabling RENDER acceleration
(II) Nov 21 15:21:34 NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:1:0:0 (GPU-0)
(--) Nov 21 15:21:34 NVIDIA(0): Memory: 524288 kBytes
(--) Nov 21 15:21:34 NVIDIA(0): VideoBIOS: 60.86.45.00.31
(II) Nov 21 15:21:34 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Nov 21 15:21:34 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Nov 21 15:21:34 NVIDIA(0): Connected display device(s) on GeForce 8600M GS at PCI:1:0:0:
(--) Nov 21 15:21:34 NVIDIA(0):     CMO (DFP-0)
(--) Nov 21 15:21:34 NVIDIA(0): CMO (DFP-0): 330.0 MHz maximum pixel clock
(--) Nov 21 15:21:34 NVIDIA(0): CMO (DFP-0): Internal Dual Link LVDS
(**) Nov 21 15:21:34 NVIDIA(0): TwinView enabled
(II) Nov 21 15:21:34 NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
(WW) Nov 21 15:21:34 NVIDIA(0): TwinView requested, but only 1 display devices found.
(II) Nov 21 15:21:34 NVIDIA(0): Assigned Display Device: DFP-0
(WW) Nov 21 15:21:34 NVIDIA(0): Invalid display device in Mode Description
(WW) Nov 21 15:21:34 NVIDIA(0):     "TV:nvidia-auto-select+1280+0"
(WW) Nov 21 15:21:34 NVIDIA(0): Not using mode description "TV:nvidia-auto-select+1280+0";
(WW) Nov 21 15:21:34 NVIDIA(0):     unable to map to display device
(II) Nov 21 15:21:34 NVIDIA(0): Validated modes:
(II) Nov 21 15:21:34 NVIDIA(0):     "TV:nvidia-auto-select+1280+0,DFP:nvidia-auto-select+0+0"
(II) Nov 21 15:21:34 NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) Nov 21 15:21:35 NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) Nov 21 15:21:35 NVIDIA(0):     option
(WW) Nov 21 15:21:35 NVIDIA(0): 32-bit ARGB GLX visuals require the Composite extension.
(WW) Nov 21 15:21:35 NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) Nov 21 15:21:35 NVIDIA(0): Initialized GPU GART.
(II) Nov 21 15:21:35 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Nov 21 15:21:35 NVIDIA(0):     enough to receive ACPI display change hotkey events.
(II) Nov 21 15:21:35 NVIDIA(0): Setting mode
(II) Nov 21 15:21:35 NVIDIA(0):     "TV:nvidia-auto-select+1280+0,DFP:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) Nov 21 15:21:36 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Nov 21 15:21:36 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Asus Laptop extra buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event8"
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event6"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event2"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event7"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Nov 21 15:28:06 NVIDIA(0): Setting mode
(II) Nov 21 15:28:06 NVIDIA(0):     "TV:nvidia-auto-select+1280+0,DFP:nvidia-auto-select+0+0"
(II) Nov 21 15:28:08 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Nov 21 15:28:08 NVIDIA(0):     enough to receive ACPI display change hotkey events.
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Asus Laptop extra buttons: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Nov 21 15:45:28 NVIDIA(0): Setting mode
(II) Nov 21 15:45:28 NVIDIA(0):     "TV:nvidia-auto-select+1280+0,DFP:nvidia-auto-select+0+0"
(II) Nov 21 15:45:29 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Nov 21 15:45:29 NVIDIA(0):     enough to receive ACPI display change hotkey events.
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Asus Laptop extra buttons: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
Jak widać problem polega na tym, że xorg nie może odnaleźć modułów, w tym choćby tak przydatnego jak dbe!

Ostrzeżenia te znajdują się w tym fragmencie logu:

Kod: Zaznacz cały

(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(WW) Warning, couldn't open module dbe
(II) UnloadModule: "dbe"
(EE) Failed to load module "dbe" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.42  Tue Oct 20 21:19:30 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "extmod"
(WW) Warning, couldn't open module extmod
(II) UnloadModule: "extmod"
(EE) Failed to load module "extmod" (module does not exist, 0)
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
Mój Xorg wygląda następująco:

Kod: Zaznacz cały

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder58)  Fri Aug 14 18:34:43 PDT 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder58)  Fri Aug 14 18:33:37 PDT 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
	Load	"dbe"
	Load	"glx"
	Load	"dri"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "TV-0"
    HorizSync       28.0 - 55.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600M GS"
    Option "AllowGLXWithComposite" "true" 
EndSection

Section "Screen"

# Removed Option "metamodes" "TV: nvidia-auto-select +1280+0, DFP: nvidia-auto-select +0+0"
# Removed Option "metamodes" "TV: 800x600 +1280+0, DFP: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "TV-0"
    Option         "metamodes" "TV: nvidia-auto-select +1280+0, DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
    Option "AddARGBGLXVisuals" "True" 
EndSection

Section "Extensions"
    Option	"Composite" "Disable"
    Option	"RENDER" "Enable"
EndSection

Section "DRI"
	Mode	0666
EndSection
Co może być powodem takiego zachowania xorga i jak ten błąd naprawić? Szczerze przyznaję, iż nie mam pojęcia co się dzieje.

: 25 listopada 2009, 08:27
autor: fnmirk
Quirel pisze:Jak widać problem polega na tym, że xorg nie może odnaleźć modułów, w tym choćby tak przydatnego jak dbe!
Błędy odnośnie tych modułów są ignorowane przez system, który korzysta z domyślnych ustawień. Sekcji dotyczącej ładowania modułów możesz już nie używać. Możesz ją spokojnie usunąć z pliku xorg.conf i sprawdzić zachowanie systemu. Właściwie to możesz zrezygnować z pliku xorg.conf całkowicie.

: 27 listopada 2009, 18:04
autor: Quirel
Dziękuję za informację.
Ostatnio nie mam czasu na przeglądanie zmian i nowinek (studia), system zainstalowany był jakieś 1,5 roku temu i od tego czasu jedyne polecenia to były:

Kod: Zaznacz cały

aptitude update
aptitude upgrade
i czasem jakaś instalacja.

Co do działania systemu po korekcji w xorg.conf - chodzi jak wcześniej, jednak wkurza mnie dalej miganie conky'ego. Biorę się więc za szukanie rozwiązania i dziękuję za jedyną odpowiedź po dłuższym czasie.

: 27 listopada 2009, 18:49
autor: fnmirk
Przedstaw plik:

Kod: Zaznacz cały

 ~/.conkyrc
i napisz jakiego środowiska graficznego używasz?

: 27 listopada 2009, 23:44
autor: Quirel

Kod: Zaznacz cały

# Opcje wymagane przez nautilusa
own_window true
own_window_type override
own_window_transparent true 
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Podwójne buforowanie - czyli od migania :)
double_buffer yes

background yes
#współrzędne położenia
gap_x 1050
gap_y 0

maximum_width 200

# X font when Xft is disabled, you can pick one with program xfontsel
# font -*-*-*-r-normal--14-*-*-*-c-*-utf8
font -xos4-terminus-*-r-normal-*-12-100-*-*-c-*-iso10646-1

# Use Xft?
use_xft yes

#xftfont Bitstream Vera Sans Mono:size=8
xftfont Terminus:encoding=utf-8:size=9
xftalpha 0.9

update_interval 1.0

total_run_times 0


# If own_window_transparent is set to no, you can set the background colour here
own_window_colour #00ff00

draw_shades yes
draw_outline no
draw_borders no
stippled_borders 8
border_margin 4
border_width 1

default_color white
default_shade_color black
default_outline_color white

alignment top_left
no_buffers yes
uppercase no

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

use_spacer true

TEXT
${color #ddaa00}${font Terminus:encoding=utf8:size=15}${time %A}${color}
${font :encoding=utf8:size=9}$alignc${color #ddaa00}${time %e %B %G}
${color slate grey}Kernel:
$alignc${color }$kernel
${color slate grey}UpTime:
$alignc${color }$uptime
${color slate grey}Load:
$alignc${color }$loadavg
${color }${color slate grey}CPU: ${color #ddaa00}$cpu% @ ${exec cpufreq-info | grep 'current CPU' | cut --bytes 28-35} $alignr$color$running_processes/ $processes
${color slate grey}${cpugraph 25,200 000000 ffffff}
${color} Core 1 $alignr Core 2 
${color #42AE4A}${cpugraph cpu1 25,100 42AE4A eeeeee} ${color #42AE4A}${cpugraph cpu2 25,95 42AE4A eeeeee}
${font :size=8}${color #ddaa00}${top name 1}$alignr${top cpu 1}
${color lightgrey}${top name 2}$alignr${top cpu 2}
${color lightgrey}${top name 3}$alignr${top cpu 3}
${color lightgrey}${top name 4}$alignr${top cpu 4}
${font :size=9}${color slate grey}RAM:   $color%$memperc ${alignr}$mem
${membar 5,200}
${color slate grey}SWAP: $color%$swapperc ${alignr}$swap
${swapbar 5,200}
${font :size=8}${color #ddaa00}${top_mem name 1}$alignr${top_mem mem 1}
${color lightgrey}${top_mem name 2}$alignr${top_mem mem 2}
${color lightgrey}${top_mem name 3}$alignr${top_mem mem 3}
${color lightgrey}${top_mem name 4}$alignr${top_mem mem 4}${font :size=9}
${color slate grey}TWARDZIEL: ${execi 60 ~/conky/hddmod} $color$alignr$diskio
${color slate grey}${diskiograph 25,200 000000 ff0000}
${color slate grey} /:${alignr}${color }${fs_free /}/${fs_size /}
${fs_bar 5,200 /}
${color slate grey} /home:${alignr}${color }${fs_free /home}/${fs_size /home}
${fs_bar 5,200 /home}
${color slate grey} /Dokumenty:${alignr}${color }${fs_free /media/Dokumenty}/${fs_size /media/Dokumenty}
${fs_bar 5,200 /media/Dokumenty}
${color slate grey} /Multimedia:${alignr}${color }${fs_free /media/Multimedia}/${fs_size /media/Multimedia}
${fs_bar 5,200 /media/Multimedia}
Temperatury:
${color slate grey} 8600M GS: ${color white}+${exec nvidia-settings -q GPUCoreTemp | grep Attribute | cut --bytes=41-42}.0°C
${color slate grey} CPU: ${color white}
${color slate grey} |-- Core 1: ${color white}${exec sensors coretemp-isa-0000 | grep C | cut --bytes=13-17,18-22}
${color slate grey} |-- Core 2: ${color white}${exec sensors coretemp-isa-0001 | grep C | cut --bytes=13-17,18-22}
${color slate grey} HDD: ${color white}+${execi 60 ~/conky/hddtemp} ${color lightgrey}.0°C
$color${color #0077ff}Połącznia
$color Wychodzące: ${tcp_portmon 32768 61000 count}
$color Przychodzące: ${tcp_portmon 1 32767 count} 
${color #0077ff}Połączenia wychpdzące ${alignr} Port$color
 ${tcp_portmon 32768 61000 rip 0} ${alignr} ${tcp_portmon 32768 61000 rservice 0}
 ${tcp_portmon 32768 61000 rip 1} ${alignr} ${tcp_portmon 32768 61000 rservice 1}
 ${tcp_portmon 32768 61000 rip 2} ${alignr} ${tcp_portmon 32768 61000 rservice 2}
 ${tcp_portmon 32768 61000 rip 3} ${alignr} ${tcp_portmon 32768 61000 rservice 3}
 ${tcp_portmon 32768 61000 rip 4} ${alignr} ${tcp_portmon 32768 61000 rservice 4}
 ${tcp_portmon 32768 61000 rip 4} ${alignr} ${tcp_portmon 32768 61000 rservice 5}
 ${tcp_portmon 32768 61000 rip 4} ${alignr} ${tcp_portmon 32768 61000 rservice 6}
 ${tcp_portmon 32768 61000 rip 4} ${alignr} ${tcp_portmon 32768 61000 rservice 7}
 ${tcp_portmon 32768 61000 rip 4} ${alignr} ${tcp_portmon 32768 61000 rservice 8}
 ${tcp_portmon 32768 61000 rip 4} ${alignr} ${tcp_portmon 32768 61000 rservice 9}
 ${tcp_portmon 32768 61000 rip 4} ${alignr} ${tcp_portmon 32768 61000 rservice 10}
¦rodowisko to gnome :)
Chwilowo bez compiza. Gwarantuję, że sterowniki poprawnie zainstalowane, gdyż glxgears daje jakieś 5900 ramek na sekundę, jest też direct :)

: 29 listopada 2009, 18:57
autor: fnmirk
Mój plik wygląda tak:

Kod: Zaznacz cały

background yes
use_xft yes
# default font
xftfont Terminus:size=11

# Text alpha when using Xft
xftalpha 0.8

update_interval 1
#own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

maximum_width 250
minimum_size 250
draw_shades no
draw_outline no
draw_borders no
#stippled_borders 8
#border_margin 4
#border_width 1
default_color green
default_shade_color black
default_outline_color green
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
gap_x 10
gap_y 10
#no_buffers yes
uppercase no
double_buffer yes
override_utf8_locale yes

TEXT
Przedstawiam tylko część główną, bez tekstu. Działa z twoimi danymi tekstowymi to je wklej na samym końcu. Zainstaluj czcionkę terminus, jak nie masz w systemie lub zmień.

: 29 listopada 2009, 19:05
autor: Quirel
Niestety dalej to samo.
Dodatkowo po odpaleniu conky'ego w konsoli zarówno na Twoim jak i moim kodzie widzę błąd:

Kod: Zaznacz cały

Xlib:  extension "XVideo" missing on display ":0.0".
wyskakującym po każdym odświeżeniu okna conky'ego.
Zapomniałem wcześniej o tym napisać.....

: 29 listopada 2009, 19:13
autor: fnmirk
Quirel, uruchamiasz to jako root? Masz to zrobić jako zwykły użytkownik.

: 29 listopada 2009, 20:39
autor: Quirel
Oczywiście, że conky'ego odpalam jako zwykły użytkownik. Mimo wszystko posiadam jakąś wiedzę i wiem, ze konto roota to konto "do zadań specjalnych" :)

W sumie kod z konsoli, na Twoich ustawieniach:

Kod: Zaznacz cały

quirel@Laptop:~$ conky
Conky: forked to background, pid is 2231
Conky: desktop window (180001e) is subwindow of root window (11c)
Conky: drawing to desktop window
Conky: failed to set up double buffer
Conky: drawing to single buffer
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Xlib:  extension "XVideo" missing on display ":0.0".
Conky: received SIGINT or SIGTERM to terminate. bye!
to zabicie programu to moja robota :)

: 29 listopada 2009, 21:06
autor: fnmirk
A zabijasz poprzednie sesje programu?

Kod: Zaznacz cały

killall -9 conky
Strefa czasowa UTC+01:00
Strona 1 z 2

Technologię dostarcza phpBB® Forum Software © phpBB Limited

Polski pakiet językowy dostarcza phpBB.pl