Netbook z Ubuntu nie widzi wewn

Problemy dotyczące innych systemów operacyjnych
ODPOWIEDZ
virnik
Posty: 37
Rejestracja: 17 marca 2009, 19:23
Lokalizacja: Bytom

Netbook z Ubuntu nie widzi wewnętrznego czytnika kart pamięci

Post autor: virnik »

Cześć.
Posiadam netbooka Acer Aspire One D255-2CKK a na nim Ubuntu Netbook remix. W sumie to zastanawiam się nad wgraniem Debiana, czegoś innego.
Na forum Ubuntu nikt nawet nie raczył spróbować mi pomóc więc szukam pomocy tutaj, w końcu Ubuntu tworzone jest na Debianie itd.

Naszła mnie ochota zamontowania karty pamięci przez czytnik. Niestety:

Kod: Zaznacz cały

fdisk -l
nie znajduje żadnego dodatkowego dysku, partycji. Czytnik jest wbudowany w netbook. Polecenie:

Kod: Zaznacz cały

lspci
wyświetla:

Kod: Zaznacz cały

 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) virnik@AmaNetbook:~$ lspci 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Domyślam się, że system wgl go nie wykrywa. Nie jest zainstalowany.
Słyszałem ,że z czytnikami są problemy. Dałoby się go jakoś zainstalować? Doprowadzić do stanu używalności?
Pozdrawiam i liczę na waszą pomoc.


Edycja:
Tak przy okazji, żeby nie zakładać nowego tematu mam jeszcze jeden problem.
Tzn. nie montuje mi automatycznie pendrive. Muszę montować ręcznie w konsoli.
Jak to zrobić żeby po włożeniu do portu USB pojawiał się z automatu na pulpicie.
Na górę
fnmirk
Senior Member
Posty: 8295
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

Przedstaw cały wynik polecenia:

Kod: Zaznacz cały

lspci -k
Oraz dodatkowo:

Kod: Zaznacz cały

uname -r
lspci -n
dmesg
Na górę
virnik
Posty: 37
Rejestracja: 17 marca 2009, 19:23
Lokalizacja: Bytom

Post autor: virnik »

Kod: Zaznacz cały

lspci -k

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: i915
	Kernel modules: i915
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
	Subsystem: Acer Incorporated [ALI] Device 0349
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel modules: i2c-i801
01:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
	Subsystem: Acer Incorporated [ALI] Device 0349
	Kernel driver in use: atl1c
	Kernel modules: atl1c
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
	Subsystem: Foxconn International, Inc. Device e016
	Kernel driver in use: ath9k
	Kernel modules: ath9k

Kod: Zaznacz cały

uname -r

Kod: Zaznacz cały

2.6.35-24-generic

Kod: Zaznacz cały

lspci -n

Kod: Zaznacz cały

00:00.0 0600: 8086:a010
00:02.0 0300: 8086:a011
00:02.1 0380: 8086:a012
00:1b.0 0403: 8086:27d8 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.1 0604: 8086:27d2 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27bc (rev 02)
00:1f.2 0106: 8086:27c1 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
01:00.0 0200: 1969:2060 (rev c1)
02:00.0 0280: 168c:002b (rev 01)
dmesg - przy tym poleceniu w terminalu nie mieści się wszystko

Kod: Zaznacz cały

    0.371008] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
[    0.371019] pci 0000:00:02.0: reg 1c: [mem 0x98000000-0x980fffff]
[    0.371081] pci 0000:00:02.1: reg 10: [mem 0x98100000-0x9817ffff]
[    0.371233] pci 0000:00:1b.0: reg 10: [mem 0x98200000-0x98203fff 64bit]
[    0.371321] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.371332] pci 0000:00:1b.0: PME# disabled
[    0.371473] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.371483] pci 0000:00:1c.0: PME# disabled
[    0.371628] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.371641] pci 0000:00:1c.1: PME# disabled
[    0.371747] pci 0000:00:1d.0: reg 20: [io  0x6080-0x609f]
[    0.371847] pci 0000:00:1d.1: reg 20: [io  0x6060-0x607f]
[    0.371945] pci 0000:00:1d.2: reg 20: [io  0x6040-0x605f]
[    0.372074] pci 0000:00:1d.3: reg 20: [io  0x6020-0x603f]
[    0.372176] pci 0000:00:1d.7: reg 10: [mem 0x98204400-0x982047ff]
[    0.372266] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.372277] pci 0000:00:1d.7: PME# disabled
[    0.372581] pci 0000:00:1f.2: reg 10: [io  0x60b8-0x60bf]
[    0.372597] pci 0000:00:1f.2: reg 14: [io  0x60cc-0x60cf]
[    0.372612] pci 0000:00:1f.2: reg 18: [io  0x60b0-0x60b7]
[    0.372627] pci 0000:00:1f.2: reg 1c: [io  0x60c8-0x60cb]
[    0.372642] pci 0000:00:1f.2: reg 20: [io  0x60a0-0x60af]
[    0.372657] pci 0000:00:1f.2: reg 24: [mem 0x98204000-0x982043ff]
[    0.372712] pci 0000:00:1f.2: PME# supported from D3hot
[    0.372723] pci 0000:00:1f.2: PME# disabled
[    0.372801] pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
[    0.372988] pci 0000:01:00.0: reg 10: [mem 0x97000000-0x9703ffff 64bit]
[    0.373006] pci 0000:01:00.0: reg 18: [io  0x5000-0x507f]
[    0.373110] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.373122] pci 0000:01:00.0: PME# disabled
[    0.380068] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.380085] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.380098] pci 0000:00:1c.0:   bridge window [mem 0x97000000-0x97ffffff]
[    0.380115] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.380283] pci 0000:02:00.0: reg 10: [mem 0x96000000-0x9600ffff 64bit]
[    0.380402] pci 0000:02:00.0: supports D1
[    0.380411] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.380425] pci 0000:02:00.0: PME# disabled
[    0.388067] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.388084] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.388097] pci 0000:00:1c.1:   bridge window [mem 0x96000000-0x96ffffff]
[    0.388114] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.388243] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.388258] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.388271] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.388289] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.388299] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.388309] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.388319] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.388329] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.388367] pci_bus 0000:00: on NUMA node 0
[    0.388393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.389044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.389350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.402156] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.402518] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.402893] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.403250] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.403624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.404017] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.404403] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.404762] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.404951] HEST: Table is not found!
[    0.405206] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.405236] vgaarb: loaded
[    0.405773] SCSI subsystem initialized
[    0.406018] libata version 3.00 loaded.
[    0.406220] usbcore: registered new interface driver usbfs
[    0.406274] usbcore: registered new interface driver hub
[    0.406365] usbcore: registered new device driver usb
[    0.408318] ACPI: WMI: Mapper loaded
[    0.408327] PCI: Using ACPI for IRQ routing
[    0.408335] PCI: pci_cache_line_size set to 64 bytes
[    0.408476] reserve RAM buffer: 0000000000002000 - 000000000000ffff 
[    0.408485] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.408493] reserve RAM buffer: 000000007f494000 - 000000007fffffff 
[    0.408503] reserve RAM buffer: 000000007f577000 - 000000007fffffff 
[    0.408512] reserve RAM buffer: 000000007f5ec000 - 000000007fffffff 
[    0.408521] reserve RAM buffer: 000000007f600000 - 000000007fffffff 
[    0.408830] NetLabel: Initializing
[    0.408838] NetLabel:  domain hash size = 128
[    0.408843] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.408881] NetLabel:  unlabeled traffic allowed by default
[    0.408996] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.409010] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.409024] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.412044] Switching to clocksource tsc
[    0.440205] AppArmor: AppArmor Filesystem Enabled
[    0.440241] pnp: PnP ACPI init
[    0.440292] ACPI: bus type pnp registered
[    0.507709] pnp: PnP ACPI: found 9 devices
[    0.507717] ACPI: ACPI bus type pnp unregistered
[    0.507726] PnPBIOS: Disabled by ACPI PNP
[    0.507762] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.507773] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.507782] system 00:01: [io  0x0610] has been reserved
[    0.507791] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.507800] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.507809] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.507849] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.507860] system 00:01: [io  0xff2c-0xff2f] has been reserved
[    0.507872] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.507882] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.507892] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.507902] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.507912] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.507923] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.507933] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.548195] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.548210] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.548226] pci 0000:00:1c.0:   bridge window [mem 0x97000000-0x97ffffff]
[    0.548240] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.548258] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.548268] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.548282] pci 0000:00:1c.1:   bridge window [mem 0x96000000-0x96ffffff]
[    0.548294] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.548310] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.548316] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.548328] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.548338] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.548375]   alloc irq_desc for 16 on node -1
[    0.548382]   alloc kstat_irqs on node -1
[    0.548399] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.548412] pci 0000:00:1c.0: setting latency timer to 64
[    0.548439]   alloc irq_desc for 17 on node -1
[    0.548445]   alloc kstat_irqs on node -1
[    0.548458] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.548469] pci 0000:00:1c.1: setting latency timer to 64
[    0.548487] pci 0000:00:1e.0: setting latency timer to 64
[    0.548499] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.548507] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.548515] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.548524] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.548532] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.548540] pci_bus 0000:01: resource 1 [mem 0x97000000-0x97ffffff]
[    0.548549] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.548558] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.548566] pci_bus 0000:02: resource 1 [mem 0x96000000-0x96ffffff]
[    0.548574] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[    0.548584] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.548591] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.548600] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.548608] pci_bus 0000:05: resource 7 [mem 0x80000000-0xfebfffff]
[    0.548706] NET: Registered protocol family 2
[    0.548897] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.549722] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.550885] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.551453] TCP: Hash tables configured (established 131072 bind 65536)
[    0.551464] TCP reno registered
[    0.551480] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.551503] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.551783] NET: Registered protocol family 1
[    0.551859] pci 0000:00:02.0: Boot video device
[    0.552168] PCI: CLS 64 bytes, default 64
[    0.552251] Simple Boot Flag at 0x44 set to 0x1
[    0.552798] cpufreq-nforce2: No nForce2 chipset.
[    0.552899] Scanning for low memory corruption every 60 seconds
[    0.553353] audit: initializing netlink socket (disabled)
[    0.553382] type=2000 audit(1293523187.548:1): initialized
[    0.576546] highmem bounce pool size: 64 pages
[    0.576565] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.581761] VFS: Disk quotas dquot_6.5.2
[    0.581967] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.584098] fuse init (API version 7.14)
[    0.584417] msgmni has been set to 1683
[    0.585547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.585558] io scheduler noop registered
[    0.585564] io scheduler deadline registered
[    0.585617] io scheduler cfq registered (default)
[    0.585937] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.586008]   alloc irq_desc for 40 on node -1
[    0.586015]   alloc kstat_irqs on node -1
[    0.586038] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.586302] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.586367]   alloc irq_desc for 41 on node -1
[    0.586373]   alloc kstat_irqs on node -1
[    0.586392] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.586708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.586748] Firmware did not grant requested _OSC control
[    0.586778] Firmware did not grant requested _OSC control
[    0.586865] Firmware did not grant requested _OSC control
[    0.586889] Firmware did not grant requested _OSC control
[    0.586922] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.587214] intel_idle: MWAIT substates: 0x20220
[    0.587221] intel_idle: v0.4 model 0x1C
[    0.587226] intel_idle: lapic_timer_reliable_states 0x6
[    0.587247] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.587570] Switching to clocksource hpet
[    0.648455] ACPI: AC Adapter [AC] (off-line)
[    0.648682] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.648697] ACPI: Power Button [PWRB]
[    0.648847] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.648860] ACPI: Sleep Button [SLPB]
[    0.649005] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.649154] ACPI: Lid Switch [LID0]
[    0.649356] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.649369] ACPI: Power Button [PWRF]
[    0.649797] ACPI: Fan [FAN] (on)
[    0.650489] ACPI: acpi_idle yielding to intel_idle
[    0.724262] thermal LNXTHERM:01: registered as thermal_zone0
[    0.724289] ACPI: Thermal Zone [THRM] (17 C)
[    0.724547] ERST: Table is not found!
[    0.725355] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.730071] brd: module loaded
[    0.732050] loop: module loaded
[    0.734013] Fixed MDIO Bus: probed
[    0.734146] PPP generic driver version 2.4.2
[    0.734312] tun: Universal TUN/TAP device driver, 1.6
[    0.734320] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    0.734594] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.734653]   alloc irq_desc for 22 on node -1
[    0.734660]   alloc kstat_irqs on node -1
[    0.734678] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[    0.734717] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.734727] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.734837] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.734890] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.734911] ehci_hcd 0000:00:1d.7: debug port 1
[    0.738808] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.738857] ehci_hcd 0000:00:1d.7: irq 22, io mem 0x98204400
[    0.742826] isapnp: Scanning for PnP cards...
[    0.743491] Freeing initrd memory: 10500k freed
[    0.756042] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.756459] hub 1-0:1.0: USB hub found
[    0.756475] hub 1-0:1.0: 8 ports detected
[    0.756714] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.756762] uhci_hcd: USB Universal Host Controller Interface driver
[    0.756841]   alloc irq_desc for 18 on node -1
[    0.756847]   alloc kstat_irqs on node -1
[    0.756864] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.756881] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.756891] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.757025] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.757098] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
[    0.757454] hub 2-0:1.0: USB hub found
[    0.757469] hub 2-0:1.0: 2 ports detected
[    0.757612]   alloc irq_desc for 20 on node -1
[    0.757619]   alloc kstat_irqs on node -1
[    0.757631] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.757647] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.757656] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.757761] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.757822] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
[    0.758166] hub 3-0:1.0: USB hub found
[    0.758179] hub 3-0:1.0: 2 ports detected
[    0.758323]   alloc irq_desc for 21 on node -1
[    0.758330]   alloc kstat_irqs on node -1
[    0.758342] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.758358] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.758366] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.758466] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.758526] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[    0.758878] hub 4-0:1.0: USB hub found
[    0.758891] hub 4-0:1.0: 2 ports detected
[    0.759034] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[    0.759050] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.759059] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.759161] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.759204] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00006020
[    0.759560] hub 5-0:1.0: USB hub found
[    0.759574] hub 5-0:1.0: 2 ports detected
[    0.759888] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.773258] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.773304] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.773521] mice: PS/2 mouse device common for all mice
[    0.773953] rtc_cmos 00:03: RTC can wake from S4
[    0.774062] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.774106] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.774443] device-mapper: uevent: version 1.0.3
[    0.774762] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[    0.774962] device-mapper: multipath: version 1.1.1 loaded
[    0.774969] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.775329] EISA: Probing bus 0 at eisa.0
[    0.775338] EISA: Cannot allocate resource for mainboard
[    0.775347] Cannot allocate resource for EISA slot 1
[    0.775354] Cannot allocate resource for EISA slot 2
[    0.775362] Cannot allocate resource for EISA slot 3
[    0.775369] Cannot allocate resource for EISA slot 4
[    0.775377] Cannot allocate resource for EISA slot 5
[    0.775384] Cannot allocate resource for EISA slot 6
[    0.775392] Cannot allocate resource for EISA slot 7
[    0.775399] Cannot allocate resource for EISA slot 8
[    0.775405] EISA: Detected 0 cards.
[    0.775839] cpuidle: using governor ladder
[    0.776227] cpuidle: using governor menu
[    0.777084] TCP cubic registered
[    0.777504] NET: Registered protocol family 10
[    0.778516] lo: Disabled Privacy Extensions
[    0.779126] NET: Registered protocol family 17
[    0.780810] Using IPI No-Shortcut mode
[    0.781087] PM: Resume from disk failed.
[    0.781115] registered taskstats version 1
[    0.781604]   Magic number: 6:325:977
[    0.781741] rtc_cmos 00:03: setting system clock to 2010-12-28 07:59:48 UTC (1293523188)
[    0.781749] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.781755] EDD information not available.
[    0.794446] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.088548] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    1.097031] isapnp: No Plug & Play device found
[    1.097069] Freeing unused kernel memory: 688k freed
[    1.097630] Write protecting the kernel text: 4932k
[    1.097704] Write protecting the kernel read-only data: 1980k
[    1.135811] udev[77]: starting version 163
[    1.408414] ACPI: Battery Slot [BAT0] (battery present)
[    1.947499] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.947525] atl1c 0000:01:00.0: setting latency timer to 64
[    1.981758] ahci 0000:00:1f.2: version 3.0
[    1.981798] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.981878]   alloc irq_desc for 42 on node -1
[    1.981886]   alloc kstat_irqs on node -1
[    1.981911] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.981994] ahci: SSS flag set, parallel bus scan disabled
[    1.982054] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.982067] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.982080] ahci 0000:00:1f.2: setting latency timer to 64
[    1.982772] scsi0 : ahci
[    1.983136] scsi1 : ahci
[    1.983399] scsi2 : ahci
[    1.983641] scsi3 : ahci
[    1.984431] ata1: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204100 irq 42
[    1.984444] ata2: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204180 irq 42
[    1.984451] ata3: DUMMY
[    1.984456] ata4: DUMMY
[    2.085943] atl1c 0000:01:00.0: version 1.0.0.2-NAPI
[    2.476134] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.477323] ata1.00: unexpected _GTF length (4)
[    2.477619] ata1.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
[    2.477635] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.478844] ata1.00: unexpected _GTF length (4)
[    2.479179] ata1.00: configured for UDMA/133
[    2.492401] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-2 01.0 PQ: 0 ANSI: 5
[    2.492938] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.493056] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.493292] sd 0:0:0:0: [sda] Write Protect is off
[    2.493304] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.493393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.493795]  sda: sda1 sda2 < sda5 >
[    2.558091] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.812154] ata2: SATA link down (SStatus 0 SControl 300)
[    3.223098] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   17.254818] Adding 6142972k swap on /dev/sda5.  Priority:-1 extents:1 across:6142972k 
[   17.278495] udev[348]: starting version 163
[   17.383515] lp: driver loaded but no devices found
[   17.554814] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   18.348868] Linux agpgart interface v0.103
[   18.391289] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[   18.392492] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[   18.556766] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[   18.580623] psmouse serio1: ID: 10 00 64
[   18.624667] cfg80211: Calling CRDA to update world regulatory domain
[   18.726323] cfg80211: World regulatory domain updated:
[   18.726333]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.726344]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.726353]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.726362]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.726371]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.726380]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.788480] elantech: assuming hardware version 2, firmware version 20.2.0
[   18.817855] Linux video capture interface: v2.00
[   18.847830] elantech: Synaptics capabilities query result 0x68, 0x18, 0x0b.
[   18.906145] uvcvideo: Found UVC 1.00 device 1.3M WebCam (0402:9665)
[   18.913019] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
[   18.913484] usbcore: registered new interface driver uvcvideo
[   18.913493] USB Video Class driver (v0.1.0)
[   18.923160] type=1400 audit(1293523206.637:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=754 comm="apparmor_parser"
[   18.923981] type=1400 audit(1293523206.637:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=754 comm="apparmor_parser"
[   18.924531] type=1400 audit(1293523206.641:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=754 comm="apparmor_parser"
[   19.045111] [drm] Initialized drm 1.1.0 20060810
[   19.168067] elantech: retrying ps2 command 0xe6 (2).
[   19.335930]   alloc irq_desc for 43 on node -1
[   19.335940]   alloc kstat_irqs on node -1
[   19.335970] atl1c 0000:01:00.0: irq 43 for MSI/MSI-X
[   19.337011] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.448010] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   19.448034] ath9k 0000:02:00.0: setting latency timer to 64
[   19.504494] ath: EEPROM regdomain: 0x65
[   19.504537] ath: EEPROM indicates we should expect a direct regpair map
[   19.504548] ath: Country alpha2 being used: 00
[   19.504554] ath: Regpair used: 0x65
[   19.509964] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.509978] i915 0000:00:02.0: setting latency timer to 64
[   19.604254]   alloc irq_desc for 44 on node -1
[   19.604265]   alloc kstat_irqs on node -1
[   19.604285] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[   19.604309] [drm] set up 7M of stolen space
[   19.639396] type=1400 audit(1293523207.353:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=854 comm="apparmor_parser"
[   19.663255] type=1400 audit(1293523207.377:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=856 comm="apparmor_parser"
[   19.675681] type=1400 audit(1293523207.389:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=856 comm="apparmor_parser"
[   19.681681] elantech: retrying ps2 command 0xf8 (2).
[   19.683357] type=1400 audit(1293523207.397:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=856 comm="apparmor_parser"
[   19.700581] type=1400 audit(1293523207.417:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=858 comm="apparmor_parser"
[   19.701675] type=1400 audit(1293523207.417:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=858 comm="apparmor_parser"
[   19.708827] type=1400 audit(1293523207.425:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=859 comm="apparmor_parser"
[   19.713359] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem :o wns=io+mem
[   19.713838] [drm] initialized overlay support
[   19.762810] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   19.764453] Registered led device: ath9k-phy0::radio
[   19.764509] Registered led device: ath9k-phy0::assoc
[   19.764567] Registered led device: ath9k-phy0::tx
[   19.764619] Registered led device: ath9k-phy0::rx
[   19.764635] phy0: Atheros AR9285 Rev:2 mem=0xf87a0000, irq=17
[   20.039723] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.056591] Skipping EDID probe due to cached edid
[   20.387045] Console: switching to colour frame buffer device 128x37
[   20.396624] fb0: inteldrmfb frame buffer device
[   20.396630] drm: registered panic notifier
[   20.396657] Slow work thread pool: Starting up
[   20.396801] Slow work thread pool: Ready
[   20.402311] elantech: retrying ps2 command 0xf8 (1).
[   20.436139] vboxdrv: Found 2 processor cores.
[   20.437715] vboxdrv: fAsync=0 offMin=0x276 offMax=0x2f94
[   20.439186] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   20.439196] vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000).
[   20.700778] acpi device:27: registered as cooling_device3
[   20.701865] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   20.702036] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   20.702105] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   20.704115]   alloc irq_desc for 19 on node -1
[   20.704124]   alloc kstat_irqs on node -1
[   20.704144] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   20.704250]   alloc irq_desc for 45 on node -1
[   20.704257]   alloc kstat_irqs on node -1
[   20.704281] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   20.704345] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   20.776284] Skipping EDID probe due to cached edid
[   20.866204] hda_codec: ALC272X: BIOS auto-probing.
[   20.959804] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[   21.198854] ppdev: user-space parallel port driver
[   21.476771] Skipping EDID probe due to cached edid
[   21.608233] Skipping EDID probe due to cached edid
[   22.219642] wlan0: authenticate with 00:06:25:d7:2b:9d (try 1)
[   22.221711] wlan0: authenticated
[   22.221764] wlan0: associate with 00:06:25:d7:2b:9d (try 1)
[   22.223905] wlan0: RX AssocResp from 00:06:25:d7:2b:9d (capab=0x1 status=0 aid=2)
[   22.223914] wlan0: associated
[   22.224720] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   23.194644] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[   24.192156] Skipping EDID probe due to cached edid
[   24.228114] Skipping EDID probe due to cached edid
[   24.268620] Skipping EDID probe due to cached edid
[   30.008141] Skipping EDID probe due to cached edid
[   30.107362] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[   30.888628] Skipping EDID probe due to cached edid
[   32.352813] wlan0: no IPv6 routers present
[   36.896109] Skipping EDID probe due to cached edid
[   76.544000] lo: Disabled Privacy Extensions

Dodane:
Co, nikt nie wie?
Na górę
Awatar użytkownika
xmaster
Junior Member
Posty: 558
Rejestracja: 13 stycznia 2009, 08:19
Lokalizacja: /dev/piotrków tryb.

Post autor: xmaster »

Jeśli coś Ci się nie mieści w terminalu to zrób zrzut wyniku do pliku

Kod: Zaznacz cały

[I]nazwa polecenia [/I]> [I]nazwa_pliku[/I]
Na górę
virnik
Posty: 37
Rejestracja: 17 marca 2009, 19:23
Lokalizacja: Bytom

Post autor: virnik »

Dziękuję za informację.
Tutaj cały wynik dmesg:

Kod: Zaznacz cały

 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-23-generic (buildd@roseapple) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #41-Ubuntu SMP Wed Nov 24 10:18:49 UTC 2010 (Ubuntu 2.6.35-23.41-generic 2.6.35.7)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f494000 (usable)
[    0.000000]  BIOS-e820: 000000007f494000 - 000000007f4bf000 (reserved)
[    0.000000]  BIOS-e820: 000000007f4bf000 - 000000007f577000 (usable)
[    0.000000]  BIOS-e820: 000000007f577000 - 000000007f5bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f5bf000 - 000000007f5ec000 (usable)
[    0.000000]  BIOS-e820: 000000007f5ec000 - 000000007f5ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f5ff000 - 000000007f600000 (usable)
[    0.000000]  BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.6 present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-through
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask 0FFE00000 write-protect
[    0.000000]   1 base 000000000 mask 0C0000000 write-back
[    0.000000]   2 base 040000000 mask 0C0000000 write-back
[    0.000000]   3 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
[    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f494000 (usable)
[    0.000000]  modified: 000000007f494000 - 000000007f4bf000 (reserved)
[    0.000000]  modified: 000000007f4bf000 - 000000007f577000 (usable)
[    0.000000]  modified: 000000007f577000 - 000000007f5bf000 (ACPI NVS)
[    0.000000]  modified: 000000007f5bf000 - 000000007f5ec000 (usable)
[    0.000000]  modified: 000000007f5ec000 - 000000007f5ff000 (ACPI data)
[    0.000000]  modified: 000000007f5ff000 - 000000007f600000 (usable)
[    0.000000]  modified: 000000007f600000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 375aa000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 009a5000 - 013ea1c6
[    0.000000] Move RAMDISK from 00000000375aa000 - 0000000037fef1c5 to 009a5000 - 013ea1c5
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 7f5fe120 00064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 7f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 7f5f1000 08CBC (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 7f584000 00040
[    0.000000] ACPI: HPET 7f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 7f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 7f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: NSLI 7f5f0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 7f5ef000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 7f5ed000 00655 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: WDAT 7f5ec000 00194 (v01 INSYDE INSYDE   00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x00000002
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f494
[    0.000000]     0: 0x0007f4bf -> 0x0007f577
[    0.000000]     0: 0x0007f5bf -> 0x0007f5ec
[    0.000000]     0: 0x0007f5ff -> 0x0007f600
[    0.000000] On node 0 totalpages: 521482
[    0.000000] free_area_init_node: node 0, pgdat c07ffd00, node_mem_map c13ec020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2301 pages used for memmap
[    0.000000]   HighMem zone: 291967 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928 u1048576
[    0.000000] pcpu-alloc: s36416 r0 d20928 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517405
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35-23-generic root=UUID=39005466-df3d-4a9d-aacb-d70a40c10825 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10434540 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Subtract (55 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000100000 - 00009a0adc]   TEXT DATA BSS
[    0.000000]   #3 [000009fc00 - 0000100000]   BIOS reserved
[    0.000000]   #4 [00009a1000 - 00009a4273]             BRK
[    0.000000]   #5 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #6 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #7 [0000015000 - 0000016000]         PGTABLE
[    0.000000]   #8 [00009a5000 - 00013eb000]     NEW RAMDISK
[    0.000000]   #9 [00013eb000 - 00013ec000]         BOOTMEM
[    0.000000]   #10 [00013ec000 - 00023dc000]         BOOTMEM
[    0.000000]   #11 [00023dc000 - 00023dc004]         BOOTMEM
[    0.000000]   #12 [00023dc040 - 00023dc100]         BOOTMEM
[    0.000000]   #13 [00023dc100 - 00023dc154]         BOOTMEM
[    0.000000]   #14 [00023dc180 - 00023df180]         BOOTMEM
[    0.000000]   #15 [00023df180 - 00023df1ec]         BOOTMEM
[    0.000000]   #16 [00023df200 - 00023e5200]         BOOTMEM
[    0.000000]   #17 [00023e5200 - 00023e5225]         BOOTMEM
[    0.000000]   #18 [00023e5240 - 00023e5267]         BOOTMEM
[    0.000000]   #19 [00023e5280 - 00023e54b0]         BOOTMEM
[    0.000000]   #20 [00023e54c0 - 00023e5500]         BOOTMEM
[    0.000000]   #21 [00023e5500 - 00023e5540]         BOOTMEM
[    0.000000]   #22 [00023e5540 - 00023e5580]         BOOTMEM
[    0.000000]   #23 [00023e5580 - 00023e55c0]         BOOTMEM
[    0.000000]   #24 [00023e55c0 - 00023e5600]         BOOTMEM
[    0.000000]   #25 [00023e5600 - 00023e5640]         BOOTMEM
[    0.000000]   #26 [00023e5640 - 00023e5680]         BOOTMEM
[    0.000000]   #27 [00023e5680 - 00023e56c0]         BOOTMEM
[    0.000000]   #28 [00023e56c0 - 00023e5700]         BOOTMEM
[    0.000000]   #29 [00023e5700 - 00023e5740]         BOOTMEM
[    0.000000]   #30 [00023e5740 - 00023e5780]         BOOTMEM
[    0.000000]   #31 [00023e5780 - 00023e57c0]         BOOTMEM
[    0.000000]   #32 [00023e57c0 - 00023e5800]         BOOTMEM
[    0.000000]   #33 [00023e5800 - 00023e5840]         BOOTMEM
[    0.000000]   #34 [00023e5840 - 00023e5880]         BOOTMEM
[    0.000000]   #35 [00023e5880 - 00023e58c0]         BOOTMEM
[    0.000000]   #36 [00023e58c0 - 00023e5900]         BOOTMEM
[    0.000000]   #37 [00023e5900 - 00023e5910]         BOOTMEM
[    0.000000]   #38 [00023e5940 - 00023e5950]         BOOTMEM
[    0.000000]   #39 [00023e5980 - 00023e59e5]         BOOTMEM
[    0.000000]   #40 [00023e5a00 - 00023e5a65]         BOOTMEM
[    0.000000]   #41 [0002400000 - 000240e000]         BOOTMEM
[    0.000000]   #42 [0002500000 - 000250e000]         BOOTMEM
[    0.000000]   #43 [0002600000 - 000260e000]         BOOTMEM
[    0.000000]   #44 [0002700000 - 000270e000]         BOOTMEM
[    0.000000]   #45 [00023e7a80 - 00023e7a84]         BOOTMEM
[    0.000000]   #46 [00023e7ac0 - 00023e7ac4]         BOOTMEM
[    0.000000]   #47 [00023e7b00 - 00023e7b10]         BOOTMEM
[    0.000000]   #48 [00023e7b40 - 00023e7b50]         BOOTMEM
[    0.000000]   #49 [00023e7b80 - 00023e7c20]         BOOTMEM
[    0.000000]   #50 [00023e7c40 - 00023e7c88]         BOOTMEM
[    0.000000]   #51 [00023e7cc0 - 00023ebcc0]         BOOTMEM
[    0.000000]   #52 [000240e000 - 000248e000]         BOOTMEM
[    0.000000]   #53 [000248e000 - 00024ce000]         BOOTMEM
[    0.000000]   #54 [000270e000 - 00031017ec]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f600)
[    0.000000] Memory: 2038960k/2086912k available (4930k kernel code, 46968k reserved, 2334k data, 684k init, 1177072k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0819000 - 0xc08c4000   ( 684 kB)
[    0.000000]       .data : 0xc05d0bee - 0xc0818628   (2334 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05d0bee   (4930 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1662.620 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.24 BogoMIPS (lpj=6650480)
[    0.004021] pid_max: default: 32768 minimum: 301
[    0.004067] Security Framework initialized
[    0.004102] AppArmor: AppArmor initialized
[    0.004107] Yama: becoming mindful.
[    0.004222] Mount-cache hash table entries: 512
[    0.008197] Initializing cgroup subsys ns
[    0.008206] Initializing cgroup subsys cpuacct
[    0.008217] Initializing cgroup subsys memory
[    0.008235] Initializing cgroup subsys devices
[    0.008241] Initializing cgroup subsys freezer
[    0.008247] Initializing cgroup subsys net_cls
[    0.008295] CPU: Physical Processor ID: 0
[    0.008299] CPU: Processor Core ID: 0
[    0.008305] mce: CPU supports 5 MCE banks
[    0.008318] CPU0: Thermal monitoring enabled (TM2)
[    0.008326] using mwait in idle threads.
[    0.008338] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[    0.008356] ... version:                3
[    0.008361] ... bit width:              40
[    0.008365] ... generic registers:      2
[    0.008370] ... value mask:             000000ffffffffff
[    0.008375] ... max period:             000000007fffffff
[    0.008380] ... fixed-purpose events:   3
[    0.008385] ... event mask:             0000000700000003
[    0.013028] ACPI: Core revision 20100428
[    0.036018] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.036029] ftrace: allocating 21766 entries in 43 pages
[    0.048063] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048466] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088163] CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz stepping 0a
[    0.092000] Booting Node   0, Processors  #1
[    0.008000] Initializing CPU#1
[    0.180029] Brought up 2 CPUs
[    0.180038] Total of 2 processors activated (6650.40 BogoMIPS).
[    0.180394] devtmpfs: initialized
[    0.182387] regulator: core version 0.5
[    0.182429] Time: 14:28:46  Date: 01/02/11
[    0.182509] NET: Registered protocol family 16
[    0.182584] Trying to unpack rootfs image as initramfs...
[    0.184305] EISA bus registered
[    0.184331] ACPI: bus type pci registered
[    0.184523] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.184535] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.184541] PCI: Using MMCONFIG for extended config space
[    0.184547] PCI: Using configuration type 1 for base access
[    0.188547] bio: create slab <bio-0> at 0
[    0.194857] ACPI: EC: Look up EC in DSDT
[    0.201645] ACPI: Executed 1 blocks of module-level executable AML code
[    0.209085] ACPI: BIOS _OSI(Linux) query ignored
[    0.212507] ACPI: SSDT 7f4b7790 00708 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.214879] ACPI: Dynamic OEM Table Load:
[    0.214891] ACPI: SSDT (null) 00708 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.215694] ACPI: SSDT 7f4b5690 00646 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.217351] ACPI: Dynamic OEM Table Load:
[    0.217363] ACPI: SSDT (null) 00646 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.218868] ACPI: SSDT 7f4b6d90 0015F (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.220660] ACPI: Dynamic OEM Table Load:
[    0.220673] ACPI: SSDT (null) 0015F (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.221186] ACPI: SSDT 7f4b6f10 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.222864] ACPI: Dynamic OEM Table Load:
[    0.222877] ACPI: SSDT (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.224316] ACPI: Interpreter enabled
[    0.224327] ACPI: (supports S0 S3 S4 S5)
[    0.224415] ACPI: Using IOAPIC for interrupt routing
[    0.373352] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.373554] ACPI: Power Resource [FN00] (on)
[    0.374199] ACPI: No dock devices found.
[    0.374211] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.376122] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.379071] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.379083] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.379094] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.379108] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[    0.379224] pci 0000:00:02.0: reg 10: [mem 0x98180000-0x981fffff]
[    0.379238] pci 0000:00:02.0: reg 14: [io  0x60c0-0x60c7]
[    0.379250] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
[    0.379261] pci 0000:00:02.0: reg 1c: [mem 0x98000000-0x980fffff]
[    0.379325] pci 0000:00:02.1: reg 10: [mem 0x98100000-0x9817ffff]
[    0.379479] pci 0000:00:1b.0: reg 10: [mem 0x98200000-0x98203fff 64bit]
[    0.379567] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.379579] pci 0000:00:1b.0: PME# disabled
[    0.379720] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.379731] pci 0000:00:1c.0: PME# disabled
[    0.379876] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.379886] pci 0000:00:1c.1: PME# disabled
[    0.380021] pci 0000:00:1d.0: reg 20: [io  0x6080-0x609f]
[    0.380129] pci 0000:00:1d.1: reg 20: [io  0x6060-0x607f]
[    0.380236] pci 0000:00:1d.2: reg 20: [io  0x6040-0x605f]
[    0.380337] pci 0000:00:1d.3: reg 20: [io  0x6020-0x603f]
[    0.380437] pci 0000:00:1d.7: reg 10: [mem 0x98204400-0x982047ff]
[    0.380527] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.380538] pci 0000:00:1d.7: PME# disabled
[    0.380829] pci 0000:00:1f.2: reg 10: [io  0x60b8-0x60bf]
[    0.380846] pci 0000:00:1f.2: reg 14: [io  0x60cc-0x60cf]
[    0.380863] pci 0000:00:1f.2: reg 18: [io  0x60b0-0x60b7]
[    0.380879] pci 0000:00:1f.2: reg 1c: [io  0x60c8-0x60cb]
[    0.380896] pci 0000:00:1f.2: reg 20: [io  0x60a0-0x60af]
[    0.380913] pci 0000:00:1f.2: reg 24: [mem 0x98204000-0x982043ff]
[    0.380972] pci 0000:00:1f.2: PME# supported from D3hot
[    0.380984] pci 0000:00:1f.2: PME# disabled
[    0.381068] pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
[    0.381258] pci 0000:01:00.0: reg 10: [mem 0x97000000-0x9703ffff 64bit]
[    0.381276] pci 0000:01:00.0: reg 18: [io  0x5000-0x507f]
[    0.381382] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.381394] pci 0000:01:00.0: PME# disabled
[    0.388074] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.388090] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.388104] pci 0000:00:1c.0:   bridge window [mem 0x97000000-0x97ffffff]
[    0.388122] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.388286] pci 0000:02:00.0: reg 10: [mem 0x96000000-0x9600ffff 64bit]
[    0.388400] pci 0000:02:00.0: supports D1
[    0.388407] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.388419] pci 0000:02:00.0: PME# disabled
[    0.396062] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.396079] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.396092] pci 0000:00:1c.1:   bridge window [mem 0x96000000-0x96ffffff]
[    0.396109] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.396235] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.396247] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.396259] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.396276] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.396286] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.396295] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.396304] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.396313] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.396349] pci_bus 0000:00: on NUMA node 0
[    0.396374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.397046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.397348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.410253] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.410643] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.411008] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.411380] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.411738] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.412142] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.412519] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.412878] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.413076] HEST: Table is not found!
[    0.413326] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.413355] vgaarb: loaded
[    0.413894] SCSI subsystem initialized
[    0.414139] libata version 3.00 loaded.
[    0.414333] usbcore: registered new interface driver usbfs
[    0.414386] usbcore: registered new interface driver hub
[    0.414470] usbcore: registered new device driver usb
[    0.416451] ACPI: WMI: Mapper loaded
[    0.416459] PCI: Using ACPI for IRQ routing
[    0.416468] PCI: pci_cache_line_size set to 64 bytes
[    0.416610] reserve RAM buffer: 0000000000002000 - 000000000000ffff 
[    0.416619] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.416627] reserve RAM buffer: 000000007f494000 - 000000007fffffff 
[    0.416637] reserve RAM buffer: 000000007f577000 - 000000007fffffff 
[    0.416646] reserve RAM buffer: 000000007f5ec000 - 000000007fffffff 
[    0.416655] reserve RAM buffer: 000000007f600000 - 000000007fffffff 
[    0.416959] NetLabel: Initializing
[    0.416966] NetLabel:  domain hash size = 128
[    0.416971] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.417006] NetLabel:  unlabeled traffic allowed by default
[    0.417121] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.417136] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.417150] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.420178] Switching to clocksource tsc
[    0.447200] AppArmor: AppArmor Filesystem Enabled
[    0.447235] pnp: PnP ACPI init
[    0.447278] ACPI: bus type pnp registered
[    0.515552] pnp: PnP ACPI: found 9 devices
[    0.515561] ACPI: ACPI bus type pnp unregistered
[    0.515570] PnPBIOS: Disabled by ACPI PNP
[    0.515603] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.515615] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.515624] system 00:01: [io  0x0610] has been reserved
[    0.515632] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.515642] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.515681] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.515691] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.515702] system 00:01: [io  0xff2c-0xff2f] has been reserved
[    0.515714] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.515725] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.515734] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.515744] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.515754] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.515765] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.515775] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.556052] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.556066] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.556081] pci 0000:00:1c.0:   bridge window [mem 0x97000000-0x97ffffff]
[    0.556094] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.556110] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.556119] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.556132] pci 0000:00:1c.1:   bridge window [mem 0x96000000-0x96ffffff]
[    0.556144] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.556160] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.556166] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.556178] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.556188] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.556225]   alloc irq_desc for 16 on node -1
[    0.556232]   alloc kstat_irqs on node -1
[    0.556250] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.556263] pci 0000:00:1c.0: setting latency timer to 64
[    0.556292]   alloc irq_desc for 17 on node -1
[    0.556299]   alloc kstat_irqs on node -1
[    0.556312] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.556324] pci 0000:00:1c.1: setting latency timer to 64
[    0.556342] pci 0000:00:1e.0: setting latency timer to 64
[    0.556354] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.556363] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.556373] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.556382] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.556391] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.556400] pci_bus 0000:01: resource 1 [mem 0x97000000-0x97ffffff]
[    0.556410] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.556418] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.556426] pci_bus 0000:02: resource 1 [mem 0x96000000-0x96ffffff]
[    0.556435] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[    0.556444] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.556452] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.556460] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.556468] pci_bus 0000:05: resource 7 [mem 0x80000000-0xfebfffff]
[    0.556568] NET: Registered protocol family 2
[    0.556763] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.557576] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.558649] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.559228] TCP: Hash tables configured (established 131072 bind 65536)
[    0.559237] TCP reno registered
[    0.559249] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.559280] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.559601] NET: Registered protocol family 1
[    0.559679] pci 0000:00:02.0: Boot video device
[    0.559975] PCI: CLS 64 bytes, default 64
[    0.560044] Simple Boot Flag at 0x44 set to 0x1
[    0.560617] cpufreq-nforce2: No nForce2 chipset.
[    0.560719] Scanning for low memory corruption every 60 seconds
[    0.561163] audit: initializing netlink socket (disabled)
[    0.561190] type=2000 audit(1293978526.556:1): initialized
[    0.584561] highmem bounce pool size: 64 pages
[    0.584577] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.589735] VFS: Disk quotas dquot_6.5.2
[    0.589939] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.592025] fuse init (API version 7.14)
[    0.592355] msgmni has been set to 1683
[    0.593253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.593263] io scheduler noop registered
[    0.593269] io scheduler deadline registered
[    0.593321] io scheduler cfq registered (default)
[    0.593620] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.593696]   alloc irq_desc for 40 on node -1
[    0.593703]   alloc kstat_irqs on node -1
[    0.593725] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.594005] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.594071]   alloc irq_desc for 41 on node -1
[    0.594077]   alloc kstat_irqs on node -1
[    0.594097] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.594420] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.594461] Firmware did not grant requested _OSC control
[    0.594491] Firmware did not grant requested _OSC control
[    0.594570] Firmware did not grant requested _OSC control
[    0.594594] Firmware did not grant requested _OSC control
[    0.594626] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.594917] intel_idle: MWAIT substates: 0x20220
[    0.594923] intel_idle: v0.4 model 0x1C
[    0.594929] intel_idle: lapic_timer_reliable_states 0x6
[    0.594948] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.595286] Switching to clocksource hpet
[    0.656441] ACPI: AC Adapter [AC] (off-line)
[    0.656677] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.656693] ACPI: Power Button [PWRB]
[    0.656848] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.656861] ACPI: Sleep Button [SLPB]
[    0.657007] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.657146] ACPI: Lid Switch [LID0]
[    0.657339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.657350] ACPI: Power Button [PWRF]
[    0.657792] ACPI: Fan [FAN] (on)
[    0.658472] ACPI: acpi_idle yielding to intel_idle
[    0.732206] thermal LNXTHERM:01: registered as thermal_zone0
[    0.732234] ACPI: Thermal Zone [THRM] (16 C)
[    0.732493] ERST: Table is not found!
[    0.733311] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.737988] brd: module loaded
[    0.739915] loop: module loaded
[    0.741871] Fixed MDIO Bus: probed
[    0.742004] PPP generic driver version 2.4.2
[    0.742154] tun: Universal TUN/TAP device driver, 1.6
[    0.742160] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    0.742426] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.742488]   alloc irq_desc for 22 on node -1
[    0.742496]   alloc kstat_irqs on node -1
[    0.742516] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[    0.742561] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.742571] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.742692] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.742742] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.742764] ehci_hcd 0000:00:1d.7: debug port 1
[    0.746659] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.746768] ehci_hcd 0000:00:1d.7: irq 22, io mem 0x98204400
[    0.747109] isapnp: Scanning for PnP cards...
[    0.755985] Freeing initrd memory: 10520k freed
[    0.764294] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.764712] hub 1-0:1.0: USB hub found
[    0.764732] hub 1-0:1.0: 8 ports detected
[    0.764934] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.764983] uhci_hcd: USB Universal Host Controller Interface driver
[    0.765064]   alloc irq_desc for 18 on node -1
[    0.765070]   alloc kstat_irqs on node -1
[    0.765087] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.765104] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.765114] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.765243] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.765314] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
[    0.765672] hub 2-0:1.0: USB hub found
[    0.765686] hub 2-0:1.0: 2 ports detected
[    0.765829]   alloc irq_desc for 20 on node -1
[    0.765836]   alloc kstat_irqs on node -1
[    0.765848] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.765864] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.765873] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.765996] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.766057] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
[    0.766398] hub 3-0:1.0: USB hub found
[    0.766411] hub 3-0:1.0: 2 ports detected
[    0.766557]   alloc irq_desc for 21 on node -1
[    0.766563]   alloc kstat_irqs on node -1
[    0.766575] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.766591] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.766600] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.766705] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.766769] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[    0.767134] hub 4-0:1.0: USB hub found
[    0.767147] hub 4-0:1.0: 2 ports detected
[    0.767290] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[    0.767307] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.767316] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.767422] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.767465] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00006020
[    0.767809] hub 5-0:1.0: USB hub found
[    0.767823] hub 5-0:1.0: 2 ports detected
[    0.768168] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.782779] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.782797] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.783143] mice: PS/2 mouse device common for all mice
[    0.783621] rtc_cmos 00:03: RTC can wake from S4
[    0.783730] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.783774] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.784140] device-mapper: uevent: version 1.0.3
[    0.784459] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[    0.784661] device-mapper: multipath: version 1.1.1 loaded
[    0.784669] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.785027] EISA: Probing bus 0 at eisa.0
[    0.785036] EISA: Cannot allocate resource for mainboard
[    0.785044] Cannot allocate resource for EISA slot 1
[    0.785051] Cannot allocate resource for EISA slot 2
[    0.785059] Cannot allocate resource for EISA slot 3
[    0.785066] Cannot allocate resource for EISA slot 4
[    0.785074] Cannot allocate resource for EISA slot 5
[    0.785081] Cannot allocate resource for EISA slot 6
[    0.785088] Cannot allocate resource for EISA slot 7
[    0.785096] Cannot allocate resource for EISA slot 8
[    0.785102] EISA: Detected 0 cards.
[    0.785538] cpuidle: using governor ladder
[    0.785943] cpuidle: using governor menu
[    0.786736] TCP cubic registered
[    0.787177] NET: Registered protocol family 10
[    0.788202] lo: Disabled Privacy Extensions
[    0.788812] NET: Registered protocol family 17
[    0.790466] Using IPI No-Shortcut mode
[    0.790754] PM: Resume from disk failed.
[    0.790782] registered taskstats version 1
[    0.791272]   Magic number: 11:527:484
[    0.791411] rtc_cmos 00:03: setting system clock to 2011-01-02 14:28:47 UTC (1293978527)
[    0.791419] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.791425] EDD information not available.
[    0.800262] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.096047] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    1.101317] isapnp: No Plug & Play device found
[    1.101355] Freeing unused kernel memory: 684k freed
[    1.101921] Write protecting the kernel text: 4932k
[    1.101999] Write protecting the kernel read-only data: 1976k
[    1.140065] udev[77]: starting version 163
[    1.428405] ACPI: Battery Slot [BAT0] (battery present)
[    1.955056] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.955080] atl1c 0000:01:00.0: setting latency timer to 64
[    2.009013] ahci 0000:00:1f.2: version 3.0
[    2.009053] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.009132]   alloc irq_desc for 42 on node -1
[    2.009139]   alloc kstat_irqs on node -1
[    2.009163] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    2.009247] ahci: SSS flag set, parallel bus scan disabled
[    2.009306] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    2.009318] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    2.009332] ahci 0000:00:1f.2: setting latency timer to 64
[    2.010019] scsi0 : ahci
[    2.010378] scsi1 : ahci
[    2.010625] scsi2 : ahci
[    2.010872] scsi3 : ahci
[    2.011661] ata1: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204100 irq 42
[    2.011673] ata2: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204180 irq 42
[    2.011682] ata3: DUMMY
[    2.011687] ata4: DUMMY
[    2.089916] atl1c 0000:01:00.0: version 1.0.0.2-NAPI
[    2.500138] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.501312] ata1.00: unexpected _GTF length (4)
[    2.501608] ata1.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
[    2.501625] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.502856] ata1.00: unexpected _GTF length (4)
[    2.503210] ata1.00: configured for UDMA/133
[    2.516396] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-2 01.0 PQ: 0 ANSI: 5
[    2.516934] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.517243] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.517402] sd 0:0:0:0: [sda] Write Protect is off
[    2.517410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.517478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.517865]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    2.605613] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.836142] ata2: SATA link down (SStatus 0 SControl 300)
[    3.696462] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.891058] Adding 2050044k swap on /dev/sda7.  Priority:-1 extents:1 across:2050044k 
[   13.905400] udev[346]: starting version 163
[   14.019935] lp: driver loaded but no devices found
[   14.348942] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.848230] Linux agpgart interface v0.103
[   14.895543] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[   14.944036] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[   15.093917] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[   15.102812] Linux video capture interface: v2.00
[   15.164485] uvcvideo: Found UVC 1.00 device 1.3M WebCam (0402:9665)
[   15.179429] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
[   15.179940] cfg80211: Calling CRDA to update world regulatory domain
[   15.180815] usbcore: registered new interface driver uvcvideo
[   15.180825] USB Video Class driver (v0.1.0)
[   15.251486] psmouse serio1: ID: 10 00 64
[   15.259896] cfg80211: World regulatory domain updated:
[   15.259905]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.259915]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.259923]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.259931]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.259940]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.259948]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.272081] type=1400 audit(1293978541.977:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=665 comm="apparmor_parser"
[   15.289131] type=1400 audit(1293978541.993:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=665 comm="apparmor_parser"
[   15.289669] type=1400 audit(1293978541.993:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=665 comm="apparmor_parser"
[   15.411538] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.417961] elantech: assuming hardware version 2, firmware version 20.2.0
[   15.455472] [drm] Initialized drm 1.1.0 20060810
[   15.475004] elantech: Synaptics capabilities query result 0x68, 0x18, 0x0b.
[   15.696740] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.696754] i915 0000:00:02.0: setting latency timer to 64
[   15.740019] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   15.740041] ath9k 0000:02:00.0: setting latency timer to 64
[   15.793509] ath: EEPROM regdomain: 0x65
[   15.793518] ath: EEPROM indicates we should expect a direct regpair map
[   15.793529] ath: Country alpha2 being used: 00
[   15.793536] ath: Regpair used: 0x65
[   15.795261]   alloc irq_desc for 43 on node -1
[   15.795270]   alloc kstat_irqs on node -1
[   15.795290] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   15.795314] [drm] set up 7M of stolen space
[   15.804632] elantech: retrying ps2 command 0xe6 (2).
[   15.904962] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem :o wns=io+mem
[   15.905416] [drm] initialized overlay support
[   15.929030] phy0: Selected rate control algorithm 'ath9k_rate_control'
[   15.930567] Registered led device: ath9k-phy0::radio
[   15.930621] Registered led device: ath9k-phy0::assoc
[   15.930673] Registered led device: ath9k-phy0::tx
[   15.930725] Registered led device: ath9k-phy0::rx
[   15.930743] phy0: Atheros AR9285 Rev:2 mem=0xf82c0000, irq=17
[   16.220054] Skipping EDID probe due to cached edid
[   16.317853] elantech: retrying ps2 command 0xf8 (2).
[   16.592182] Console: switching to colour frame buffer device 128x37
[   16.599113] fb0: inteldrmfb frame buffer device
[   16.599118] drm: registered panic notifier
[   16.599126] Slow work thread pool: Starting up
[   16.599257] Slow work thread pool: Ready
[   16.876234] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   16.904246] acpi device:27: registered as cooling_device3
[   16.905344] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   16.905513] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   16.905579] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   16.907535]   alloc irq_desc for 19 on node -1
[   16.907544]   alloc kstat_irqs on node -1
[   16.907565] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   16.907671]   alloc irq_desc for 44 on node -1
[   16.907678]   alloc kstat_irqs on node -1
[   16.907702] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   16.907766] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.972602] Skipping EDID probe due to cached edid
[   16.981478] hda_codec: ALC272X: BIOS auto-probing.
[   17.020809] elantech: retrying ps2 command 0xf8 (1).
[   17.581107] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[   17.829170] ppdev: user-space parallel port driver
[   17.830690] type=1400 audit(1293978544.533:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=890 comm="apparmor_parser"
[   17.831532] type=1400 audit(1293978544.533:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=890 comm="apparmor_parser"
[   17.832078] type=1400 audit(1293978544.533:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser"
[   17.899069] type=1400 audit(1293978544.601:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=891 comm="apparmor_parser"
[   17.900986] type=1400 audit(1293978544.605:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=898 comm="apparmor_parser"
[   17.902086] type=1400 audit(1293978544.605:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=898 comm="apparmor_parser"
[   17.942577]   alloc irq_desc for 45 on node -1
[   17.942587]   alloc kstat_irqs on node -1
[   17.942620] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[   17.957370] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.957488] type=1400 audit(1293978544.661:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=968 comm="apparmor_parser"
[   18.054580] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.232319] Skipping EDID probe due to cached edid
[   18.372336] Skipping EDID probe due to cached edid
[   20.242842] wlan0: authenticate with 00:06:25:d7:2b:9d (try 1)
[   20.244764] wlan0: authenticated
[   20.244803] wlan0: associate with 00:06:25:d7:2b:9d (try 1)
[   20.247330] wlan0: RX AssocResp from 00:06:25:d7:2b:9d (capab=0x1 status=0 aid=1)
[   20.247337] wlan0: associated
[   20.247877] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   21.674025] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[   22.278666] EXT4-fs (sda5): re-mounted. Opts: commit=600
[   22.289372] EXT4-fs (sda6): re-mounted. Opts: commit=600
[   22.497254] Skipping EDID probe due to cached edid
[   22.576622] Skipping EDID probe due to cached edid
[   22.613897] Skipping EDID probe due to cached edid
[   22.656639] Skipping EDID probe due to cached edid
[   26.181354] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[   26.376617] Skipping EDID probe due to cached edid
[   26.637085] EXT4-fs (sda5): re-mounted. Opts: commit=600
[   26.689791] EXT4-fs (sda6): re-mounted. Opts: commit=600
[   27.668627] Skipping EDID probe due to cached edid
[   28.752623] Skipping EDID probe due to cached edid
[   30.432546] wlan0: no IPv6 routers present
[   37.724119] Skipping EDID probe due to cached edid
Na górę
fnmirk
Senior Member
Posty: 8295
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

Tu masz nieomal wszystko co dotyczy takiego sprzętu pod Debianem:
http://wiki.debian.org/DebianAcerOne
http://wiki.debian.org/DebianEeePC

Spróbuj coś dopasować. Nie mając takiego urządzenia pod ręką trudno pomagać.
Na górę
ODPOWIEDZ

Wróć do „Inne systemy”