Polskie Forum Użytkowników Debiana

Kod: Zaznacz cały

uname - r

Kod: Zaznacz cały

lsusb

Kod: Zaznacz cały

dmesg | tail -n100

Kod: Zaznacz cały

uname -r
2.6.32-5-686

Kod: Zaznacz cały

lsusb
Bus 005 Device 002: ID 1241:1603 Belkin Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / Trust 450L Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 4102:2102 iRiver, Ltd. H10 5GB (mtp)
Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Kod: Zaznacz cały

dmesg | tail -n100
[    6.658508]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.658512]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    6.658515]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    6.658803] cfg80211: Calling CRDA for country: US
[    6.697495] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.697502] ACPI: I/O resource 0000:00:1f.3 [0x5420-0x543f] conflicts with ACPI region SMBI [0x5420-0x542f]
[    6.697561] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.180567] usbcore: registered new interface driver hiddev
[    7.225063] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
[    7.225176] generic-usb 0003:1241:1603.0002: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.3-1/input0
[    7.249570] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0
[    7.278771] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    7.314829] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input9
[    7.314936] generic-usb 0003:1241:1603.0003: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.3-1/input1
[    7.314969] usbcore: registered new interface driver usbhid
[    7.314973] usbhid: v2.6:USB HID core driver
[    7.406783] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input10
[    7.406915] a4tech 0003:09DA:0006.0001: input,hidraw2: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.2-1/input0
[    7.498841] [drm] Initialized drm 1.1.0 20060810
[    7.544730] Linux video capture interface: v2.00
[    7.792700] ath5k 0000:06:02.0: enabling device (0000 -> 0002)
[    7.792717] ath5k 0000:06:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.792778] ath5k 0000:06:02.0: registered as 'phy0'
[    8.511905] ath: EEPROM regdomain: 0x63
[    8.511909] ath: EEPROM indicates we should expect a direct regpair map
[    8.511913] ath: Country alpha2 being used: 00
[    8.511915] ath: Regpair used: 0x63
[    8.674219] intel_rng: FWH not detected
[    8.842725] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100)
[    8.911874] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input11
[    8.912294] usbcore: registered new interface driver uvcvideo
[    8.912548] USB Video Class driver (v0.1.0)
[    9.052223] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.052229] i915 0000:00:02.0: setting latency timer to 64
[    9.061463] [drm] set up 7M of stolen space
[    9.165481] phy0: Selected rate control algorithm 'minstrel'
[    9.166212] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[    9.166559] yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090]
[    9.166586] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[    9.166589] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[    9.166596] yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44
[    9.199280] [drm] initialized overlay support
[    9.615232] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[    9.615238] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[    9.615243] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[    9.615255] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
[    9.615260] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: clean.
[    9.615511] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
[    9.615515] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[    9.922964] Console: switching to colour frame buffer device 160x50
[    9.930769] fb0: inteldrmfb frame buffer device
[    9.930771] registered panic notifier
[    9.930929] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.088219] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   10.090286] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   10.091149] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   10.091851] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   10.092837] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   10.229526] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.229561] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.583356] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[   11.930163] Adding 1477940k swap on /dev/sda5.  Priority:-1 extents:1 across:1477940k 
[   12.142228] EXT3 FS on sda1, internal journal
[   12.368673] loop: module loaded
[   14.435299] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.640474] fuse init (API version 7.13)
[   15.992280] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[   17.090579] apm: BIOS not found.
[   17.816207] b44: eth0: Link is up at 100 Mbps, full duplex.
[   17.816211] b44: eth0: Flow control is off for TX and off for RX.
[   17.816360] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.451239] vboxdrv: Found 1 processor cores.
[   20.452355] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   20.452359] vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
[   20.822239] ACPI: EC: GPE storm detected, transactions will use polling mode
[   21.076291] Bluetooth: Core ver 2.15
[   21.076362] NET: Registered protocol family 31
[   21.076364] Bluetooth: HCI device and connection manager initialized
[   21.076367] Bluetooth: HCI socket layer initialized
[   21.171918] Bluetooth: L2CAP ver 2.14
[   21.171921] Bluetooth: L2CAP socket layer initialized
[   21.263737] Bluetooth: RFCOMM TTY layer initialized
[   21.263742] Bluetooth: RFCOMM socket layer initialized
[   21.263744] Bluetooth: RFCOMM ver 1.11
[   21.410637] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.410641] Bluetooth: BNEP filters: protocol multicast
[   21.635924] Bluetooth: SCO (Voice Link) ver 0.6
[   21.635927] Bluetooth: SCO socket layer initialized
[   24.098642] lp: driver loaded but no devices found
[   24.423965] ppdev: user-space parallel port driver
[   25.244930] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.152027] eth0: no IPv6 routers present
[ 7511.808055] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 7511.941541] usb 1-1: config 128 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 100, changing to 10
[ 7511.943900] usb 1-1: New USB device found, idVendor=4102, idProduct=2102
[ 7511.943903] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7511.943906] usb 1-1: Product: IRIVER H10
[ 7511.943909] usb 1-1: Manufacturer: IRIVER
[ 7511.943911] usb 1-1: SerialNumber:           3ME3MA8P  
[ 7511.944107] usb 1-1: configuration #128 chosen from 1 choice