Laptop Asus nagrzewa się podczas pracy z Linuksem
: 19 grudnia 2011, 10:32
Witam.
Mam laptopa asus x53sv, który strasznie grzeje na Debianie. Na Windowsie przy normalnej pracy laptop nie oddaje praktycznie ciepła na radiatorze. Na Linuksie robi się ciepły, zużywa więcej baterii, oraz głośniej szumi.
Dane techniczne laptopa: Intel Core i5-2410M 4 GB ddr3 hdd 750 GB karta graficzna Intel HD oraz Nvidia Gt540m (technologia optimus) nie wspierana na Linuksie. Co mogę zrobić oraz co podać jakie logi itd. żeby rozpoznać problem? Podejrzewam, że to karta graficzna.
Xorg.0.log
Dodane:
Czy ktoś jest w stanie udzielić pomocy? Dodam jeszcze Temperatury z xsesnors są takie zakładki
acpitz temperatura okpło 70 stopni.
Asus to chyba to samo co acpitz ponieważ są te same temperatury.
Nouveau 58 stopni
Coretemp: physical id 0 73 stopni C | core 0 74 stopni C | core 1 64 stopni C.
Sprawdzane przy włączonych programach: amarok, kadu, google chrome.
Mam laptopa asus x53sv, który strasznie grzeje na Debianie. Na Windowsie przy normalnej pracy laptop nie oddaje praktycznie ciepła na radiatorze. Na Linuksie robi się ciepły, zużywa więcej baterii, oraz głośniej szumi.
Dane techniczne laptopa: Intel Core i5-2410M 4 GB ddr3 hdd 750 GB karta graficzna Intel HD oraz Nvidia Gt540m (technologia optimus) nie wspierana na Linuksie. Co mogę zrobić oraz co podać jakie logi itd. żeby rozpoznać problem? Podejrzewam, że to karta graficzna.
Kod: Zaznacz cały
root@debian:/home/istrd# uname -a
Linux debian 3.1.0-1-amd64 #1 SMP Mon Nov 14 09:06:12 UTC 2011 x86_64 GNU/Linux
Kod: Zaznacz cały
root@debian:/home/istrd# lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. Device 15f2
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 1277
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1ac3
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller: nVidia Corporation GF108 [GeForce GT 540M] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 15f2
Kernel driver in use: nouveau
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: AzureWave AW-NB037H 802.11bgn Wireless Half-size Mini PCIe Card [AR9002WB-1NGCD]
Kernel driver in use: ath9k
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: r8169
Kod: Zaznacz cały
root@debian:/home/istrd# lspci -n
00:00.0 0600: 8086:0104 (rev 09)
00:01.0 0604: 8086:0101 (rev 09)
00:02.0 0300: 8086:0116 (rev 09)
00:16.0 0780: 8086:1c3a (rev 04)
00:1a.0 0c03: 8086:1c2d (rev 05)
00:1b.0 0403: 8086:1c20 (rev 05)
00:1c.0 0604: 8086:1c10 (rev b5)
00:1c.1 0604: 8086:1c12 (rev b5)
00:1c.5 0604: 8086:1c1a (rev b5)
00:1d.0 0c03: 8086:1c26 (rev 05)
00:1f.0 0601: 8086:1c49 (rev 05)
00:1f.2 0101: 8086:1c01 (rev 05)
00:1f.3 0c05: 8086:1c22 (rev 05)
00:1f.5 0101: 8086:1c09 (rev 05)
01:00.0 0300: 10de:0df4 (rev a1)
03:00.0 0280: 168c:002b (rev 01)
04:00.0 0200: 10ec:8168 (rev 06)
Kod: Zaznacz cały
[ 25.074] X.Org X Server 1.11.2.901 (1.11.3 RC 1)
Release Date: 2011-11-28
[ 25.074] X Protocol Version 11, Revision 0
[ 25.074] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 25.074] Current Operating System: Linux debian 3.1.0-1-amd64 #1 SMP Mon Nov 14 09:06:12 UTC 2011 x86_64
[ 25.074] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=b5a5dc72-457e-49de-9a44-669530b0eb92 ro quiet
[ 25.074] Build Date: 29 November 2011 05:01:50PM
[ 25.074] xorg-server 2:1.11.2.901-1 (Cyril Brulebois <[email protected]>)
[ 25.074] Current version of pixman: 0.24.0
[ 25.074] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.074] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.074] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 19 08:33:24 2011
[ 25.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.321] (==) No Layout section. Using the first Screen section.
[ 25.321] (==) No screen section available. Using defaults.
[ 25.321] (**) |-->Screen "Default Screen Section" (0)
[ 25.321] (**) | |-->Monitor "<default monitor>"
[ 25.336] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.337] (==) Automatically adding devices
[ 25.337] (==) Automatically enabling devices
[ 25.386] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 25.386] Entry deleted from font path.
[ 25.466] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 25.466] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 25.466] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.484] (II) Loader magic: 0xf772a580
[ 25.485] (II) Module ABI versions:
[ 25.485] X.Org ANSI C Emulation: 0.4
[ 25.485] X.Org Video Driver: 11.0
[ 25.485] X.Org XInput driver : 13.0
[ 25.485] X.Org Server Extension : 6.0
[ 25.485] (--) PCI:*(0:0:2:0) 8086:0116:1043:15f2 rev 9, Mem @ 0xdd400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[ 25.485] (--) PCI: (0:1:0:0) 10de:0df4:1043:15f2 rev 161, Mem @ 0xdc000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 25.485] (II) Open ACPI successful (/var/run/acpid.socket)
[ 25.485] (II) LoadModule: "extmod"
[ 25.520] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 25.537] (II) Module extmod: vendor="X.Org Foundation"
[ 25.537] compiled for 1.11.2.901, module version = 1.0.0
[ 25.537] Module class: X.Org Server Extension
[ 25.537] ABI class: X.Org Server Extension, version 6.0
[ 25.537] (II) Loading extension SELinux
[ 25.537] (II) Loading extension MIT-SCREEN-SAVER
[ 25.537] (II) Loading extension XFree86-VidModeExtension
[ 25.537] (II) Loading extension XFree86-DGA
[ 25.537] (II) Loading extension DPMS
[ 25.537] (II) Loading extension XVideo
[ 25.537] (II) Loading extension XVideo-MotionCompensation
[ 25.537] (II) Loading extension X-Resource
[ 25.537] (II) LoadModule: "dbe"
[ 25.538] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 25.554] (II) Module dbe: vendor="X.Org Foundation"
[ 25.554] compiled for 1.11.2.901, module version = 1.0.0
[ 25.554] Module class: X.Org Server Extension
[ 25.554] ABI class: X.Org Server Extension, version 6.0
[ 25.554] (II) Loading extension DOUBLE-BUFFER
[ 25.554] (II) LoadModule: "glx"
[ 25.554] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.577] (II) Module glx: vendor="X.Org Foundation"
[ 25.577] compiled for 1.11.2.901, module version = 1.0.0
[ 25.577] ABI class: X.Org Server Extension, version 6.0
[ 25.577] (==) AIGLX enabled
[ 25.577] (II) Loading extension GLX
[ 25.577] (II) LoadModule: "record"
[ 25.577] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 25.587] (II) Module record: vendor="X.Org Foundation"
[ 25.587] compiled for 1.11.2.901, module version = 1.13.0
[ 25.587] Module class: X.Org Server Extension
[ 25.587] ABI class: X.Org Server Extension, version 6.0
[ 25.587] (II) Loading extension RECORD
[ 25.587] (II) LoadModule: "dri"
[ 25.587] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 25.600] (II) Module dri: vendor="X.Org Foundation"
[ 25.600] compiled for 1.11.2.901, module version = 1.0.0
[ 25.600] ABI class: X.Org Server Extension, version 6.0
[ 25.600] (II) Loading extension XFree86-DRI
[ 25.600] (II) LoadModule: "dri2"
[ 25.600] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.600] (II) Module dri2: vendor="X.Org Foundation"
[ 25.600] compiled for 1.11.2.901, module version = 1.2.0
[ 25.600] ABI class: X.Org Server Extension, version 6.0
[ 25.600] (II) Loading extension DRI2
[ 25.601] (==) Matched intel as autoconfigured driver 0
[ 25.601] (==) Matched vesa as autoconfigured driver 1
[ 25.601] (==) Matched fbdev as autoconfigured driver 2
[ 25.601] (==) Assigned the driver to the xf86ConfigLayout
[ 25.601] (II) LoadModule: "intel"
[ 25.601] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.795] (II) Module intel: vendor="X.Org Foundation"
[ 25.795] compiled for 1.11.1.902, module version = 2.17.0
[ 25.795] Module class: X.Org Video Driver
[ 25.796] ABI class: X.Org Video Driver, version 11.0
[ 25.796] (II) LoadModule: "vesa"
[ 25.796] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.833] (II) Module vesa: vendor="X.Org Foundation"
[ 25.833] compiled for 1.11.0, module version = 2.3.0
[ 25.833] Module class: X.Org Video Driver
[ 25.833] ABI class: X.Org Video Driver, version 11.0
[ 25.833] (II) LoadModule: "fbdev"
[ 25.834] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.849] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.849] compiled for 1.11.0, module version = 0.4.2
[ 25.849] ABI class: X.Org Video Driver, version 11.0
[ 25.849] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 25.849] (II) VESA: driver for VESA chipsets: vesa
[ 25.849] (II) FBDEV: driver for framebuffer: fbdev
[ 25.849] (++) using VT number 7
[ 25.868] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 25.868] (WW) Falling back to old probe method for vesa
[ 25.868] (WW) Falling back to old probe method for fbdev
[ 25.868] (II) Loading sub module "fbdevhw"
[ 25.868] (II) LoadModule: "fbdevhw"
[ 25.868] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.893] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.893] compiled for 1.11.2.901, module version = 0.0.2
[ 25.893] ABI class: X.Org Video Driver, version 11.0
[ 25.893] drmOpenDevice: node name is /dev/dri/card0
[ 25.893] drmOpenDevice: open result is 9, (OK)
[ 25.893] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 25.893] drmOpenDevice: node name is /dev/dri/card0
[ 25.893] drmOpenDevice: open result is 9, (OK)
[ 25.893] drmOpenByBusid: drmOpenMinor returns 9
[ 25.893] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 25.893] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 25.893] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 25.893] (==) intel(0): RGB weight 888
[ 25.893] (==) intel(0): Default visual is TrueColor
[ 25.893] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 25.893] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 25.893] (**) intel(0): Relaxed fencing enabled
[ 25.893] (**) intel(0): Wait on SwapBuffers? enabled
[ 25.893] (**) intel(0): Triple buffering? enabled
[ 25.893] (**) intel(0): Framebuffer tiled
[ 25.893] (**) intel(0): Pixmaps tiled
[ 25.893] (**) intel(0): 3D buffers tiled
[ 25.893] (**) intel(0): SwapBuffers wait enabled
[ 25.893] (==) intel(0): video overlay key set to 0x101fe
[ 25.893] (II) intel(0): Output LVDS1 has no monitor section
[ 25.893] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 25.893] (II) intel(0): Output VGA1 has no monitor section
[ 25.917] (II) intel(0): Output HDMI1 has no monitor section
[ 25.964] (II) intel(0): Output DP1 has no monitor section
[ 25.964] (II) intel(0): EDID for output LVDS1
[ 25.964] (II) intel(0): Manufacturer: AUO Model: 26ec Serial#: 0
[ 25.964] (II) intel(0): Year: 2009 Week: 1
[ 25.964] (II) intel(0): EDID Version: 1.3
[ 25.964] (II) intel(0): Digital Display Input
[ 25.964] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 25.964] (II) intel(0): Gamma: 2.20
[ 25.964] (II) intel(0): No DPMS capabilities specified
[ 25.964] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.964] (II) intel(0): First detailed timing is preferred mode
[ 25.964] (II) intel(0): redX: 0.577 redY: 0.333 greenX: 0.333 greenY: 0.554
[ 25.964] (II) intel(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
[ 25.964] (II) intel(0): Manufacturer's mask: 0
[ 25.964] (II) intel(0): Supported detailed timing:
[ 25.964] (II) intel(0): clock: 71.8 MHz Image Size: 344 x 193 mm
[ 25.964] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 25.964] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 784 v_border: 0
[ 25.964] (II) intel(0): Unknown vendor-specific block f
[ 25.964] (II) intel(0): AUO
[ 25.964] (II) intel(0): B156XW02 V6
[ 25.964] (II) intel(0): EDID (in hex):
[ 25.964] (II) intel(0): 00ffffffffffff0006afec2600000000
[ 25.964] (II) intel(0): 01130103802213780ad7759355558d29
[ 25.964] (II) intel(0): 24505400000001010101010101010101
[ 25.964] (II) intel(0): 0101010101010c1c56a0500010303020
[ 25.964] (II) intel(0): 360058c1100000180000000f00000000
[ 25.964] (II) intel(0): 00000000000000000020000000fe0041
[ 25.964] (II) intel(0): 554f0a202020202020202020000000fe
[ 25.964] (II) intel(0): 004231353658573032205636200a0065
[ 25.964] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 25.964] (II) intel(0): Printing DDC gathered Modelines:
[ 25.964] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 25.964] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 25.964] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 25.964] (II) intel(0): Printing probed modes for output LVDS1
[ 25.964] (II) intel(0): Modeline "1366x768"x60.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 25.964] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 25.964] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 25.964] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 25.964] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 25.964] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 25.964] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 25.964] (II) intel(0): EDID for output VGA1
[ 25.988] (II) intel(0): EDID for output HDMI1
[ 26.036] (II) intel(0): EDID for output DP1
[ 26.036] (II) intel(0): Output LVDS1 connected
[ 26.036] (II) intel(0): Output VGA1 disconnected
[ 26.036] (II) intel(0): Output HDMI1 disconnected
[ 26.036] (II) intel(0): Output DP1 disconnected
[ 26.036] (II) intel(0): Using exact sizes for initial modes
[ 26.036] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 26.036] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.036] (II) intel(0): Kernel page flipping support detected, enabling
[ 26.036] (**) intel(0): Display dimensions: (340, 190) mm
[ 26.036] (**) intel(0): DPI set to (102, 102)
[ 26.036] (II) Loading sub module "fb"
[ 26.036] (II) LoadModule: "fb"
[ 26.036] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.054] (II) Module fb: vendor="X.Org Foundation"
[ 26.054] compiled for 1.11.2.901, module version = 1.0.0
[ 26.054] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.054] (II) Loading sub module "dri2"
[ 26.054] (II) LoadModule: "dri2"
[ 26.054] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.055] (II) Module dri2: vendor="X.Org Foundation"
[ 26.055] compiled for 1.11.2.901, module version = 1.2.0
[ 26.055] ABI class: X.Org Server Extension, version 6.0
[ 26.055] (II) UnloadModule: "vesa"
[ 26.055] (II) Unloading vesa
[ 26.055] (II) UnloadModule: "fbdev"
[ 26.055] (II) Unloading fbdev
[ 26.055] (II) UnloadModule: "fbdevhw"
[ 26.055] (II) Unloading fbdevhw
[ 26.055] (==) Depth 24 pixmap format is 32 bpp
[ 26.055] (II) intel(0): [DRI2] Setup complete
[ 26.055] (II) intel(0): [DRI2] DRI driver: i965
[ 26.055] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 26.108] (II) UXA(0): Driver registered support for the following operations:
[ 26.108] (II) solid
[ 26.108] (II) copy
[ 26.108] (II) composite (RENDER acceleration)
[ 26.108] (II) put_image
[ 26.108] (II) get_image
[ 26.108] (==) intel(0): Backing store disabled
[ 26.108] (==) intel(0): Silken mouse enabled
[ 26.108] (II) intel(0): Initializing HW Cursor
[ 26.168] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.169] (==) intel(0): DPMS enabled
[ 26.169] (==) intel(0): Intel XvMC decoder enabled
[ 26.169] (II) intel(0): Set up textured video
[ 26.169] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 26.169] (II) intel(0): direct rendering: DRI2 Enabled
[ 26.169] (==) intel(0): hotplug detection: "enabled"
[ 26.169] (--) RandR disabled
[ 26.169] (II) Initializing built-in extension Generic Event Extension
[ 26.169] (II) Initializing built-in extension SHAPE
[ 26.169] (II) Initializing built-in extension MIT-SHM
[ 26.169] (II) Initializing built-in extension XInputExtension
[ 26.169] (II) Initializing built-in extension XTEST
[ 26.169] (II) Initializing built-in extension BIG-REQUESTS
[ 26.169] (II) Initializing built-in extension SYNC
[ 26.169] (II) Initializing built-in extension XKEYBOARD
[ 26.169] (II) Initializing built-in extension XC-MISC
[ 26.169] (II) Initializing built-in extension SECURITY
[ 26.169] (II) Initializing built-in extension XINERAMA
[ 26.169] (II) Initializing built-in extension XFIXES
[ 26.169] (II) Initializing built-in extension RENDER
[ 26.169] (II) Initializing built-in extension RANDR
[ 26.169] (II) Initializing built-in extension COMPOSITE
[ 26.169] (II) Initializing built-in extension DAMAGE
[ 26.169] (II) SELinux: Disabled on system
[ 26.633] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 26.633] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 26.633] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 26.633] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 26.633] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 26.633] (II) AIGLX: Loaded and initialized i965
[ 26.633] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 26.634] (II) intel(0): Setting screen physical size to 361 x 203
[ 27.603] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 27.603] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.603] (II) LoadModule: "evdev"
[ 27.603] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.647] (II) Module evdev: vendor="X.Org Foundation"
[ 27.647] compiled for 1.11.0, module version = 2.6.0
[ 27.647] Module class: X.Org XInput Driver
[ 27.647] ABI class: X.Org XInput driver, version 13.0
[ 27.647] (II) Using input driver 'evdev' for 'Power Button'
[ 27.647] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.647] (**) Power Button: always reports core events
[ 27.647] (**) Power Button: Device: "/dev/input/event3"
[ 27.647] (--) Power Button: Found keys
[ 27.647] (II) Power Button: Configuring as keyboard
[ 27.647] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 27.647] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.647] (**) Option "xkb_rules" "evdev"
[ 27.647] (**) Option "xkb_model" "pc105"
[ 27.647] (**) Option "xkb_layout" "pl"
[ 27.777] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 27.777] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.777] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.777] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.777] (**) Video Bus: always reports core events
[ 27.777] (**) Video Bus: Device: "/dev/input/event8"
[ 27.777] (--) Video Bus: Found keys
[ 27.777] (II) Video Bus: Configuring as keyboard
[ 27.777] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[ 27.778] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.778] (**) Option "xkb_rules" "evdev"
[ 27.778] (**) Option "xkb_model" "pc105"
[ 27.778] (**) Option "xkb_layout" "pl"
[ 27.778] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 27.778] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.778] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.778] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.778] (**) Video Bus: always reports core events
[ 27.778] (**) Video Bus: Device: "/dev/input/event7"
[ 27.778] (--) Video Bus: Found keys
[ 27.778] (II) Video Bus: Configuring as keyboard
[ 27.778] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input7/event7"
[ 27.778] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 27.778] (**) Option "xkb_rules" "evdev"
[ 27.778] (**) Option "xkb_model" "pc105"
[ 27.778] (**) Option "xkb_layout" "pl"
[ 27.779] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 27.779] (II) No input driver/identifier specified (ignoring)
[ 27.779] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 27.779] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 27.779] (II) Using input driver 'evdev' for 'Sleep Button'
[ 27.779] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.779] (**) Sleep Button: always reports core events
[ 27.779] (**) Sleep Button: Device: "/dev/input/event2"
[ 27.779] (--) Sleep Button: Found keys
[ 27.779] (II) Sleep Button: Configuring as keyboard
[ 27.779] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 27.779] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 27.779] (**) Option "xkb_rules" "evdev"
[ 27.779] (**) Option "xkb_model" "pc105"
[ 27.779] (**) Option "xkb_layout" "pl"
[ 27.779] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event9)
[ 27.779] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 27.779] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 27.779] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.779] (**) USB 2.0 Camera: always reports core events
[ 27.779] (**) USB 2.0 Camera: Device: "/dev/input/event9"
[ 27.780] (--) USB 2.0 Camera: Found keys
[ 27.780] (II) USB 2.0 Camera: Configuring as keyboard
[ 27.780] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input9/event9"
[ 27.780] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 10)
[ 27.780] (**) Option "xkb_rules" "evdev"
[ 27.780] (**) Option "xkb_model" "pc105"
[ 27.780] (**) Option "xkb_layout" "pl"
[ 27.780] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event10)
[ 27.780] (II) No input driver/identifier specified (ignoring)
[ 27.780] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 27.780] (II) No input driver/identifier specified (ignoring)
[ 27.780] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 27.780] (II) No input driver/identifier specified (ignoring)
[ 27.781] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event5)
[ 27.781] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 27.781] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 27.781] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.781] (**) Asus WMI hotkeys: always reports core events
[ 27.781] (**) Asus WMI hotkeys: Device: "/dev/input/event5"
[ 27.781] (--) Asus WMI hotkeys: Found keys
[ 27.781] (II) Asus WMI hotkeys: Configuring as keyboard
[ 27.781] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input5/event5"
[ 27.781] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[ 27.781] (**) Option "xkb_rules" "evdev"
[ 27.781] (**) Option "xkb_model" "pc105"
[ 27.781] (**) Option "xkb_layout" "pl"
[ 27.781] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 27.781] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.781] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.781] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.781] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.781] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 27.781] (--) AT Translated Set 2 keyboard: Found keys
[ 27.781] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.781] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 27.781] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 27.781] (**) Option "xkb_rules" "evdev"
[ 27.781] (**) Option "xkb_model" "pc105"
[ 27.781] (**) Option "xkb_layout" "pl"
[ 27.782] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 27.782] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 27.782] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 27.782] (II) LoadModule: "synaptics"
[ 27.782] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.935] (II) Module synaptics: vendor="X.Org Foundation"
[ 27.935] compiled for 1.11.0, module version = 1.4.1
[ 27.935] Module class: X.Org XInput Driver
[ 27.935] ABI class: X.Org XInput driver, version 13.0
[ 27.936] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 27.936] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27.936] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 27.936] (**) Option "Device" "/dev/input/event6"
[ 28.021] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5762
[ 28.021] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902
[ 28.021] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 28.021] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 28.021] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 28.132] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 28.132] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.260] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[ 28.260] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 28.260] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 28.260] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 28.260] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 28.260] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 28.260] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 28.260] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 28.260] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 28.260] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 28.260] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 28.260] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 28.260] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 28.260] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 28.260] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.260] (**) Option "Device" "/dev/input/mouse0"
[ 28.260] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting to 1615 - 5685
[ 28.260] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting to 1729 - 4171
[ 28.260] (--) SynPS/2 Synaptics TouchPad: invalid pressure range. defaulting to 0 - 256
[ 28.260] (--) SynPS/2 Synaptics TouchPad: invalid finger width range. defaulting to 0 - 16
[ 28.281] (EE) Query no Synaptics: 6003C8
[ 28.281] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 28.281] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 28.380] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[ 28.380] (II) UnloadModule: "synaptics"
[ 28.380] (II) Unloading synaptics
[ 28.380] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 28.380] (II) No input driver/identifier specified (ignoring)
[ 28.380] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
[ 28.380] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 28.380] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 28.380] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.380] (**) ACPI Virtual Keyboard Device: always reports core events
[ 28.380] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
[ 28.381] (--) ACPI Virtual Keyboard Device: Found keys
[ 28.381] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 28.381] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[ 28.381] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
[ 28.381] (**) Option "xkb_rules" "evdev"
[ 28.381] (**) Option "xkb_model" "pc105"
[ 28.381] (**) Option "xkb_layout" "pl"
[ 28.427] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 28.427] (II) intel(0): Printing DDC gathered Modelines:
[ 28.427] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 36.308] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 36.308] (II) intel(0): Printing DDC gathered Modelines:
[ 36.308] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 36.384] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 36.384] (II) intel(0): Printing DDC gathered Modelines:
[ 36.384] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 36.517] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 36.517] (II) intel(0): Printing DDC gathered Modelines:
[ 36.518] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 36.591] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 36.591] (II) intel(0): Printing DDC gathered Modelines:
[ 36.591] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 63.173] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 63.173] (II) intel(0): Printing DDC gathered Modelines:
[ 63.173] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 63.253] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 63.253] (II) intel(0): Printing DDC gathered Modelines:
[ 63.253] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 63.327] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 63.327] (II) intel(0): Printing DDC gathered Modelines:
[ 63.327] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 67.047] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 67.047] (II) intel(0): Printing DDC gathered Modelines:
[ 67.047] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz)
[ 72.511] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse1)
[ 72.511] (II) No input driver/identifier specified (ignoring)
[ 72.511] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event14)
[ 72.511] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 72.511] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[ 72.511] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 72.512] (**) PixArt USB Optical Mouse: always reports core events
[ 72.512] (**) PixArt USB Optical Mouse: Device: "/dev/input/event14"
[ 72.512] (--) PixArt USB Optical Mouse: Found 3 mouse buttons
[ 72.512] (--) PixArt USB Optical Mouse: Found scroll wheel(s)
[ 72.512] (--) PixArt USB Optical Mouse: Found relative axes
[ 72.512] (--) PixArt USB Optical Mouse: Found x and y relative axes
[ 72.512] (II) PixArt USB Optical Mouse: Configuring as mouse
[ 72.512] (II) PixArt USB Optical Mouse: Adding scrollwheel support
[ 72.512] (**) PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 72.512] (**) PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 72.512] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input14/event14"
[ 72.512] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 15)
[ 72.512] (II) PixArt USB Optical Mouse: initialized for relative axes.
[ 72.512] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 72.512] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[ 72.512] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 72.512] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
Dodane:
Czy ktoś jest w stanie udzielić pomocy? Dodam jeszcze Temperatury z xsesnors są takie zakładki
acpitz temperatura okpło 70 stopni.
Asus to chyba to samo co acpitz ponieważ są te same temperatury.
Nouveau 58 stopni
Coretemp: physical id 0 73 stopni C | core 0 74 stopni C | core 1 64 stopni C.
Sprawdzane przy włączonych programach: amarok, kadu, google chrome.