Kod: Zaznacz cały
root@nitas-serw:~# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Pentium(R) CPU T4200 @ 2.00GHz
stepping : 10
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dtherm
bogomips : 3989.99
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Pentium(R) CPU T4200 @ 2.00GHz
stepping : 10
cpu MHz : 1200.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dtherm
bogomips : 3989.99
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
Kod: Zaznacz cały
root@nitas-serw:~# uname -a
Linux nitas-serw 3.6.0-rc4-simonell #1 SMP Sun Sep 9 00:09:02 CEST 2012 x86_64 GNU/Linux
Kod: Zaznacz cały
root@nitas-serw:~# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.0-rc4-simonell (root@nitas-serw) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Sun Sep 9 00:09:02 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc4-simonell root=UUID=68bfa227-3224-4d4b-9d1a-aea02a28326c ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffc53ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bffc5400-0x00000000bffe7fb7] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe7fb8-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed99fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq 6820s/30D7, BIOS 68MDD Ver. F.09 01/11/2008
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbffaffff]
[ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbffaffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbffaffff @ [mem 0x1f9fc000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x37d3f000-0x37feffff]
[ 0.000000] ACPI: RSDP 00000000000fc600 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bffc81c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP 00000000bffc8084 000F4 (v04 HP 30D7 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 00000000bffc84cc 127A3 (v01 HP nc6xxxs 00010000 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bffe7d80 00040
[ 0.000000] ACPI: SLIC 00000000bffc8244 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 00000000bffc83bc 00038 (v01 HP 30D7 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 00000000bffc83f4 00068 (v01 HP 30D7 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000bffc845c 0003C (v01 HP 30D7 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 00000000bffc8498 00032 (v02 HP 30D7 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000bffdac6f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 00000000bffdaf97 0014E (v01 HP HPQPRN 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 00000000bffdba27 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 00000000bffdbc86 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 00000000bffdbd2c 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbffaffff]
[ 0.000000] NODE_DATA [mem 0xbffac000-0xbffaffff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc600000-ffff8800bf5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbffaffff]
[ 0.000000] On node 0 totalpages: 786239
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 7 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12223 pages used for memmap
[ 0.000000] DMA32 zone: 770033 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78336 r8192 d24064 u1048576
[ 0.000000] pcpu-alloc: s78336 r8192 d24064 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773945
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc4-simonell root=UUID=68bfa227-3224-4d4b-9d1a-aea02a28326c ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3082424k/3145408k available (4493k kernel code, 452k absent, 62532k reserved, 4216k data, 520k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1994.995 MHz processor
[ 0.010003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.99 BogoMIPS (lpj=19949950)
[ 0.010007] pid_max: default: 32768 minimum: 301
[ 0.010032] Security Framework initialized
[ 0.010037] SELinux: Disabled at boot.
[ 0.010380] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012732] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013850] Mount-cache hash table entries: 256
[ 0.014122] Initializing cgroup subsys cpuacct
[ 0.014127] Initializing cgroup subsys devices
[ 0.014129] Initializing cgroup subsys freezer
[ 0.014131] Initializing cgroup subsys net_cls
[ 0.014159] CPU: Physical Processor ID: 0
[ 0.014160] CPU: Processor Core ID: 0
[ 0.014162] mce: CPU supports 6 MCE banks
[ 0.014171] CPU0: Thermal monitoring enabled (TM2)
[ 0.014175] process: using mwait in idle threads
[ 0.014181] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.014181] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.014181] tlb_flushall_shift is 0xffffffff
[ 0.014231] ACPI: Core revision 20120711
[ 0.020487] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.124173] smpboot: CPU0: Intel(R) Pentium(R) CPU T4200 @ 2.00GHz stepping 0a
[ 0.130000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.130000] ... version: 2
[ 0.130000] ... bit width: 40
[ 0.130000] ... generic registers: 2
[ 0.130000] ... value mask: 000000ffffffffff
[ 0.130000] ... max period: 000000007fffffff
[ 0.130000] ... fixed-purpose events: 3
[ 0.130000] ... event mask: 0000000700000003
[ 0.130000] smpboot: Booting Node 0, Processors #1 OK
[ 0.133412] Brought up 2 CPUs
[ 0.133417] smpboot: Total of 2 processors activated (7979.98 BogoMIPS)
[ 0.134301] devtmpfs: initialized
[ 0.134301] PM: Registering ACPI NVS region [mem 0xbffc5400-0xbffe7fb7] (142264 bytes)
[ 0.134301] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
[ 0.134301] dummy:
[ 0.134301] NET: Registered protocol family 16
[ 0.134301] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.134301] ACPI: bus type pci registered
[ 0.134301] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.134301] PCI: not using MMCONFIG
[ 0.134301] PCI: Using configuration type 1 for base access
[ 0.134301] bio: create slab <bio-0> at 0
[ 0.134301] ACPI: Added _OSI(Module Device)
[ 0.134301] ACPI: Added _OSI(Processor Device)
[ 0.134301] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.134301] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.140104] ACPI: EC: Look up EC in DSDT
[ 0.181301] ACPI: SSDT 00000000bffdb1ad 001FB (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.181666] ACPI: Dynamic OEM Table Load:
[ 0.181669] ACPI: SSDT (null) 001FB (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 0.181774] ACPI: SSDT 00000000bffdb42d 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.182117] ACPI: Dynamic OEM Table Load:
[ 0.182119] ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 0.182292] ACPI: SSDT 00000000bffdb0e5 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.182641] ACPI: Dynamic OEM Table Load:
[ 0.182644] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 0.182713] ACPI: SSDT 00000000bffdb3a8 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.183056] ACPI: Dynamic OEM Table Load:
[ 0.183059] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 0.210064] ACPI: Interpreter enabled
[ 0.210069] ACPI: (supports S0 S3 S4 S5)
[ 0.210084] ACPI: Using IOAPIC for interrupt routing
[ 0.210109] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.210547] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.216164] ACPI: Power Resource [C24A] (on)
[ 0.218226] ACPI: Power Resource [C174] (off)
[ 0.220474] ACPI: Power Resource [C363] (off)
[ 0.220524] ACPI: Power Resource [C364] (off)
[ 0.220576] ACPI: Power Resource [C365] (off)
[ 0.220628] ACPI: Power Resource [C366] (off)
[ 0.220680] ACPI: Power Resource [C367] (off)
[ 0.220728] ACPI: Power Resource [C368] (off)
[ 0.220777] ACPI: Power Resource [C369] (off)
[ 0.220812] ACPI: Power Resource [C36A] (off)
[ 0.221500] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.221706] ACPI: No dock devices found.
[ 0.221710] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.223944] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
[ 0.228372] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.228403] PCI host bridge to bus 0000:00
[ 0.228407] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.228410] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.228412] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.228415] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.228417] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.228420] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff]
[ 0.228422] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[ 0.228425] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.228437] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.228488] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[ 0.228532] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.228593] pci 0000:00:19.0: [8086:10c4] type 00 class 0x020000
[ 0.228616] pci 0000:00:19.0: reg 10: [mem 0xdc500000-0xdc51ffff]
[ 0.228629] pci 0000:00:19.0: reg 14: [mem 0xdc520000-0xdc520fff]
[ 0.228642] pci 0000:00:19.0: reg 18: [io 0x5000-0x501f]
[ 0.228730] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.228753] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.228808] pci 0000:00:1a.0: reg 20: [io 0x5020-0x503f]
[ 0.228854] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.228909] pci 0000:00:1a.1: reg 20: [io 0x5040-0x505f]
[ 0.228969] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.228992] pci 0000:00:1a.7: reg 10: [mem 0xdc521000-0xdc5213ff]
[ 0.229101] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.229138] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.229159] pci 0000:00:1b.0: reg 10: [mem 0xdc524000-0xdc527fff 64bit]
[ 0.229265] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.229299] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.229407] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.229444] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.229554] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.229594] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.229704] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.229739] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.229794] pci 0000:00:1d.0: reg 20: [io 0x5060-0x507f]
[ 0.229839] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.229894] pci 0000:00:1d.1: reg 20: [io 0x5080-0x509f]
[ 0.229939] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.230006] pci 0000:00:1d.2: reg 20: [io 0x50a0-0x50bf]
[ 0.230065] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.230088] pci 0000:00:1d.7: reg 10: [mem 0xdc528000-0xdc5283ff]
[ 0.230196] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.230226] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.230325] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.230439] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.230446] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
[ 0.230451] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.230459] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.230516] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.230532] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.230543] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.230556] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.230568] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.230580] pci 0000:00:1f.1: reg 20: [io 0x50c0-0x50cf]
[ 0.230638] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.230663] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
[ 0.230676] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
[ 0.230688] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
[ 0.230701] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
[ 0.230713] pci 0000:00:1f.2: reg 20: [io 0x5100-0x511f]
[ 0.230725] pci 0000:00:1f.2: reg 24: [mem 0xdc529000-0xdc5297ff]
[ 0.230792] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.230844] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.230873] pci 0000:01:00.0: [1002:7196] type 00 class 0x030000
[ 0.230895] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.230911] pci 0000:01:00.0: reg 14: [io 0x4000-0x40ff]
[ 0.230926] pci 0000:01:00.0: reg 18: [mem 0xdc400000-0xdc40ffff]
[ 0.230974] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.231039] pci 0000:01:00.0: supports D1 D2
[ 0.231086] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.231090] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.231093] pci 0000:00:01.0: bridge window [mem 0xdc400000-0xdc4fffff]
[ 0.231098] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.231157] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
[ 0.231161] pci 0000:00:1c.0: PCI bridge to [bus 08]
[ 0.231232] pci_bus 0000:10: busn_res: [bus 10] is inserted under [bus 00-ff]
[ 0.231267] pci 0000:10:00.0: [14e4:4311] type 00 class 0x028000
[ 0.231297] pci 0000:10:00.0: reg 10: [mem 0xdc000000-0xdc003fff 64bit]
[ 0.231469] pci 0000:10:00.0: supports D1 D2
[ 0.250020] pci 0000:00:1c.1: PCI bridge to [bus 10]
[ 0.250029] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.250094] pci_bus 0000:28: busn_res: [bus 28] is inserted under [bus 00-ff]
[ 0.250098] pci 0000:00:1c.4: PCI bridge to [bus 28]
[ 0.250104] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
[ 0.250109] pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.250150] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.250217] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.250231] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.250234] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.250236] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.250239] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode)
[ 0.250241] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[ 0.250244] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.250276] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.250436] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C097._PRT]
[ 0.250464] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B1._PRT]
[ 0.250523] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11E._PRT]
[ 0.250556] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
[ 0.250593] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C135._PRT]
[ 0.250658] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.250660] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.263098] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[ 0.263172] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
[ 0.263242] ACPI: PCI Interrupt Link [C130] (IRQs 10 *11)
[ 0.263305] ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled.
[ 0.263376] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
[ 0.263445] ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
[ 0.263513] ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *5
[ 0.263544] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20120711/pci_link-184)
[ 0.263623] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.263623] vgaarb: loaded
[ 0.263623] vgaarb: bridge control possible 0000:01:00.0
[ 0.263623] PCI: Using ACPI for IRQ routing
[ 0.263623] PCI: pci_cache_line_size set to 64 bytes
[ 0.263623] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.263623] e820: reserve RAM buffer [mem 0xbffb0000-0xbfffffff]
[ 0.263623] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.263623] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.263623] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.280026] Switching to clocksource hpet
[ 0.282764] pnp: PnP ACPI init
[ 0.282789] ACPI: bus type pnp registered
[ 0.282897] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.282900] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.282903] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.282965] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.282968] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.282971] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.282976] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.285179] pnp 00:01: [bus 00-ff]
[ 0.285182] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.285184] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.285187] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.285189] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.285192] pnp 00:01: [mem 0xc0000000-0xfedfffff window]
[ 0.285194] pnp 00:01: [mem 0xfee01000-0xffffffff window]
[ 0.285197] pnp 00:01: [mem 0x000d0000-0x000dffff window]
[ 0.285278] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.285422] pnp 00:02: [io 0x00f0-0x00ff]
[ 0.285438] pnp 00:02: [irq 13]
[ 0.285467] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.285479] pnp 00:03: [io 0x0000-0x000f]
[ 0.285481] pnp 00:03: [io 0x0080-0x008f]
[ 0.285483] pnp 00:03: [io 0x00c0-0x00df]
[ 0.285486] pnp 00:03: [dma 4]
[ 0.285509] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.285518] pnp 00:04: [io 0x0061]
[ 0.285544] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.285553] pnp 00:05: [io 0x0070-0x0071]
[ 0.285555] pnp 00:05: [io 0x0072-0x0073]
[ 0.285561] pnp 00:05: [irq 8]
[ 0.285585] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.285640] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.285666] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.285675] pnp 00:07: [io 0x0060]
[ 0.285677] pnp 00:07: [io 0x0064]
[ 0.285684] pnp 00:07: [irq 1]
[ 0.285712] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.285725] pnp 00:08: [irq 12]
[ 0.285754] pnp 00:08: Plug and Play ACPI device, IDs SYN013e SYN0100 SYN0002 PNP0f13 (active)
[ 0.285821] pnp 00:09: [io 0x0010-0x001f]
[ 0.285824] pnp 00:09: [io 0x0024-0x003f]
[ 0.285826] pnp 00:09: [io 0x004e-0x004f]
[ 0.285828] pnp 00:09: [io 0x0050-0x0053]
[ 0.285831] pnp 00:09: [io 0x0063]
[ 0.285833] pnp 00:09: [io 0x0065]
[ 0.285835] pnp 00:09: [io 0x0067]
[ 0.285837] pnp 00:09: [io 0x0074-0x0077]
[ 0.285839] pnp 00:09: [io 0x0090-0x009f]
[ 0.285842] pnp 00:09: [io 0x00a4-0x00bd]
[ 0.285844] pnp 00:09: [io 0x0500-0x057f]
[ 0.285846] pnp 00:09: [io 0x0800-0x080f]
[ 0.285849] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.285853] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.285912] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.285915] system 00:09: [io 0x0800-0x080f] has been reserved
[ 0.285918] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.285921] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.285925] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.286424] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.286427] pnp 00:0a: [io 0x1000-0x107f]
[ 0.286429] pnp 00:0a: [io 0x1100-0x113f]
[ 0.286432] pnp 00:0a: [io 0x1200-0x121f]
[ 0.286434] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 0.286436] pnp 00:0a: [mem 0xfec00000-0xfec000ff]
[ 0.286438] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.286441] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.286443] pnp 00:0a: [mem 0xfed90000-0xfed99fff]
[ 0.286511] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.286514] system 00:0a: [io 0x1000-0x107f] has been reserved
[ 0.286517] system 00:0a: [io 0x1100-0x113f] has been reserved
[ 0.286520] system 00:0a: [io 0x1200-0x121f] has been reserved
[ 0.286523] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.286526] system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.286529] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.286532] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.286534] system 00:0a: [mem 0xfed90000-0xfed99fff] has been reserved
[ 0.286538] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287112] pnp 00:0b: [mem 0x000cf800-0x000cffff]
[ 0.287115] pnp 00:0b: [mem 0xfeda0000-0xfedbffff]
[ 0.287117] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.287188] system 00:0b: [mem 0x000cf800-0x000cffff] has been reserved
[ 0.287191] system 00:0b: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.287194] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.287198] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287215] pnp: PnP ACPI: found 12 devices
[ 0.287216] ACPI: ACPI bus type pnp unregistered
[ 0.293756] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 10] add_size 1000
[ 0.293761] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000
[ 0.293773] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000
[ 0.293791] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.293794] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.293797] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.293803] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.293806] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.293810] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.293814] pci 0000:01:00.0: BAR 6: assigned [mem 0xdc420000-0xdc43ffff pref]
[ 0.293818] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.293821] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.293825] pci 0000:00:01.0: bridge window [mem 0xdc400000-0xdc4fffff]
[ 0.293829] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.293833] pci 0000:00:1c.0: PCI bridge to [bus 08]
[ 0.293849] pci 0000:00:1c.1: PCI bridge to [bus 10]
[ 0.293852] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.293859] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.293864] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.293872] pci 0000:00:1c.4: PCI bridge to [bus 28]
[ 0.293876] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
[ 0.293883] pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.293888] pci 0000:00:1c.4: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.293896] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.293950] pci 0000:00:1e.0: setting latency timer to 64
[ 0.293954] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.293957] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.293960] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.293962] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff]
[ 0.293964] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.293967] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
[ 0.293970] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.293972] pci_bus 0000:01: resource 1 [mem 0xdc400000-0xdc4fffff]
[ 0.293975] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.293977] pci_bus 0000:10: resource 0 [io 0x6000-0x6fff]
[ 0.293980] pci_bus 0000:10: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.293982] pci_bus 0000:10: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.293985] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
[ 0.293987] pci_bus 0000:28: resource 1 [mem 0xd8000000-0xdbffffff]
[ 0.293990] pci_bus 0000:28: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.293993] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.293995] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.293997] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.294000] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff]
[ 0.294002] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.294005] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
[ 0.294042] NET: Registered protocol family 2
[ 0.294860] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.299189] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.299736] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.299816] TCP: reno registered
[ 0.299831] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.299880] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.300053] NET: Registered protocol family 1
[ 0.300320] pci 0000:01:00.0: Boot video device
[ 0.300330] PCI: CLS 64 bytes, default 64
[ 0.300390] Unpacking initramfs...
[ 0.360710] Freeing initrd memory: 2756k freed
[ 0.362353] audit: initializing netlink socket (disabled)
[ 0.362371] type=2000 audit(1347381904.360:1): initialized
[ 0.376531] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.378362] msgmni has been set to 6025
[ 0.378567] io scheduler noop registered
[ 0.378570] io scheduler deadline registered
[ 0.378605] io scheduler cfq registered (default)
[ 0.378708] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.378814] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.378942] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.379070] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.379266] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.379831] Linux agpgart interface v0.103
[ 0.380159] i8042: PNP: PS/2 Controller [PNP0303:C247,PNP0f13:C248] at 0x60,0x64 irq 1,12
[ 0.381733] i8042: Detected active multiplexing controller, rev 1.1
[ 0.382504] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.382511] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.382514] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.382516] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.382519] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.382655] mousedev: PS/2 mouse device common for all mice
[ 0.382693] rtc_cmos 00:05: RTC can wake from S4
[ 0.382847] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.382880] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.382890] cpuidle: using governor ladder
[ 0.382891] cpuidle: using governor menu
[ 0.382943] drop_monitor: Initializing network drop monitor service
[ 0.383038] TCP: cubic registered
[ 0.383132] NET: Registered protocol family 10
[ 0.383307] mip6: Mobile IPv6
[ 0.383310] NET: Registered protocol family 17
[ 0.383509] PM: Hibernation image not present or could not be loaded.
[ 0.383523] registered taskstats version 1
[ 0.383926] rtc_cmos 00:05: setting system clock to 2012-09-11 16:45:05 UTC (1347381905)
[ 0.385007] Freeing unused kernel memory: 520k freed
[ 0.385172] Write protecting the kernel read-only data: 8192k
[ 0.390796] Freeing unused kernel memory: 1640k freed
[ 0.394106] Freeing unused kernel memory: 740k freed
[ 0.404502] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.411593] udev[49]: starting version 164
[ 0.433547] ACPI: bus type usb registered
[ 0.433583] usbcore: registered new interface driver usbfs
[ 0.433595] usbcore: registered new interface driver hub
[ 0.438474] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 0.438480] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 0.438536] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.438623] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.438672] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 0.454350] SCSI subsystem initialized
[ 0.455837] ACPI: bus type scsi registered
[ 0.464754] usbcore: registered new device driver usb
[ 0.465336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.504408] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.504414] ACPI: Thermal Zone [TZ2] (43 C)
[ 0.504555] libata version 3.00 loaded.
[ 0.513994] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.513999] ACPI: Thermal Zone [TZ3] (28 C)
[ 0.517712] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.517715] ACPI: Thermal Zone [TZ4] (75 C)
[ 0.533599] thermal LNXTHERM:03: registered as thermal_zone3
[ 0.533603] ACPI: Thermal Zone [TZ1] (58 C)
[ 0.533711] ACPI: Fan [C36B] (off)
[ 0.533783] ACPI: Fan [C36C] (off)
[ 0.533839] ACPI: Fan [C36D] (off)
[ 0.533899] ACPI: Fan [C36E] (off)
[ 0.533958] ACPI: Fan [C36F] (off)
[ 0.534022] ACPI: Fan [C370] (off)
[ 0.534081] ACPI: Fan [C371] (off)
[ 0.534120] ACPI: Fan [C372] (off)
[ 0.651930] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c4:c9:3c:3b
[ 0.651936] e1000e 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
[ 0.651959] e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 7, PBA No: FFFFFF-0FF
[ 0.652022] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.652027] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.652035] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.655946] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.655956] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.655980] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdc521000
[ 0.670026] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.670056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.670058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.670061] usb usb1: Product: EHCI Host Controller
[ 0.670063] usb usb1: Manufacturer: Linux 3.6.0-rc4-simonell ehci_hcd
[ 0.670065] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.670219] hub 1-0:1.0: USB hub found
[ 0.670225] hub 1-0:1.0: 4 ports detected
[ 0.670334] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.670338] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.670346] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.674255] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.674265] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.674282] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc528000
[ 0.690018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.690059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.690062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.690064] usb usb2: Product: EHCI Host Controller
[ 0.690067] usb usb2: Manufacturer: Linux 3.6.0-rc4-simonell ehci_hcd
[ 0.690069] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.690199] hub 2-0:1.0: USB hub found
[ 0.690205] hub 2-0:1.0: 6 ports detected
[ 0.690290] ahci 0000:00:1f.2: version 3.0
[ 0.690359] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.690407] ahci: SSS flag set, parallel bus scan disabled
[ 0.690435] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 0.690439] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[ 0.690445] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.690811] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.690954] scsi0 : ahci
[ 0.691044] scsi1 : ahci
[ 0.691116] scsi2 : ahci
[ 0.691161] ata1: SATA max UDMA/133 abar m2048@0xdc529000 port 0xdc529100 irq 45
[ 0.691163] ata2: DUMMY
[ 0.691165] ata3: DUMMY
[ 0.691301] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.691306] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.691315] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.691362] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005020
[ 0.691406] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.691409] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.691412] usb usb3: Product: UHCI Host Controller
[ 0.691414] usb usb3: Manufacturer: Linux 3.6.0-rc4-simonell uhci_hcd
[ 0.691416] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.691558] hub 3-0:1.0: USB hub found
[ 0.691564] hub 3-0:1.0: 2 ports detected
[ 0.691646] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.691650] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.691656] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.691696] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005040
[ 0.691731] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.691734] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.691736] usb usb4: Product: UHCI Host Controller
[ 0.691739] usb usb4: Manufacturer: Linux 3.6.0-rc4-simonell uhci_hcd
[ 0.691741] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.691858] hub 4-0:1.0: USB hub found
[ 0.691863] hub 4-0:1.0: 2 ports detected
[ 0.691939] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.691943] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.691949] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.691980] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005060
[ 0.692015] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.692018] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692021] usb usb5: Product: UHCI Host Controller
[ 0.692023] usb usb5: Manufacturer: Linux 3.6.0-rc4-simonell uhci_hcd
[ 0.692025] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.692142] hub 5-0:1.0: USB hub found
[ 0.692147] hub 5-0:1.0: 2 ports detected
[ 0.692217] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.692221] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.692229] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.692270] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00005080
[ 0.692308] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.692311] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692313] usb usb6: Product: UHCI Host Controller
[ 0.692316] usb usb6: Manufacturer: Linux 3.6.0-rc4-simonell uhci_hcd
[ 0.692318] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.692431] hub 6-0:1.0: USB hub found
[ 0.692436] hub 6-0:1.0: 2 ports detected
[ 0.692509] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.692513] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.692521] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.692552] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050a0
[ 0.692587] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.692590] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.692592] usb usb7: Product: UHCI Host Controller
[ 0.692594] usb usb7: Manufacturer: Linux 3.6.0-rc4-simonell uhci_hcd
[ 0.692597] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.692715] hub 7-0:1.0: USB hub found
[ 0.692720] hub 7-0:1.0: 2 ports detected
[ 1.040082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.043265] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.043269] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.043381] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.043385] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.073927] ata1.00: HPA detected: current 625140335, native 625142448
[ 1.074019] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.074022] ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.077262] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.077266] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.077372] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.077376] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.080208] ata1.00: configured for UDMA/133
[ 1.080334] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 1.083659] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.083803] sd 0:0:0:0: [sda] Write Protect is off
[ 1.083808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.083830] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.127415] sda: sda1 sda2 < sda5 >
[ 1.127782] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.330032] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 1.360030] tsc: Refined TSC clocksource calibration: 1994.999 MHz
[ 1.360034] Switching to clocksource tsc
[ 1.385893] PM: Starting manual resume from disk
[ 1.385899] PM: Hibernation image partition 8:5 present
[ 1.385900] PM: Looking for hibernation image.
[ 1.386111] PM: Image not found (code -22)
[ 1.386113] PM: Hibernation image not present or could not be loaded.
[ 1.391513] EXT3-fs (sda1): recovery required on readonly filesystem
[ 1.391517] EXT3-fs (sda1): write access will be enabled during recovery
[ 1.512413] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
[ 1.512419] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.512421] usb 3-1: Product: HP Integrated Module
[ 1.512424] usb 3-1: Manufacturer: Broadcom Corp
[ 1.790104] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 1.889799] kjournald starting. Commit interval 5 seconds
[ 1.901161] EXT3-fs (sda1): recovery complete
[ 1.901164] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.054033] usb 5-1: New USB device found, idVendor=04d9, idProduct=1603
[ 2.054038] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.054041] usb 5-1: Product: USB Keyboard
[ 2.054044] usb 5-1: Manufacturer:
[ 3.067220] udev[340]: starting version 164
[ 3.284170] ACPI: Requesting acpi_cpufreq
[ 3.292573] ACPI: AC Adapter [C1E8] (on-line)
[ 3.292838] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 3.292845] ACPI: Sleep Button [C263]
[ 3.292904] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 3.292956] ACPI: Lid Switch [C1ED]
[ 3.295897] Monitor-Mwait will be used to enter C-1 state
[ 3.299031] Monitor-Mwait will be used to enter C-2 state
[ 3.299061] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.299072] ACPI: acpi_idle registered with cpuidle
[ 3.314021] Switching to clocksource hpet
[ 3.323482] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.323490] ACPI: Power Button [PWRF]
[ 3.343001] ACPI: Battery Slot [C1E9] (battery present)
[ 3.343328] wmi: Mapper loaded
[ 3.355355] acpi device:02: registered as cooling_device10
[ 3.355529] ACPI: Video Device [C14C] (multi-head: yes rom: no post: no)
[ 3.355585] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 3.402121] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.493231] Adding 4023292k swap on /dev/sda5. Priority:-1 extents:1 across:4023292k
[ 4.655035] EXT3-fs (sda1): using internal journal
[ 5.940313] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.060168] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.060350] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.527854] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
[ 12.438913] sshd (1108): /proc/1108/oom_adj is deprecated, please use /proc/1108/oom_score_adj instead.
[ 12.780818] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 12.780825] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 12.780861] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Kod: Zaznacz cały
root@nitas-serw:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82562GT 10/100 Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Mobility Radeon X1350]
10:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)
. Nie przeszkadza to za bardzo. A zawsze jakaś oszczędność prądu.