[+] Urz

[recian]

Od kilku dni nie działa mi myszka ani tez żadne urządzenie (pendrive) podłączone do portu usb w laptopie.

Poniżej wyniki poleceń:

Kod: Zaznacz cały

xmen:/home/recian# lsusb
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1a.7/usb1'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1d.7/usb2'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1a.0/usb3'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1a.1/usb4'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1d.0/usb5'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1d.1/usb6'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1d.2/usb7'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8154940 has devpath '/devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1a.0/usb3'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1a.1/usb4'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1a.7/usb1'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1d.0/usb5'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1d.1/usb6'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1d.2/usb7'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1d.7/usb2'
libudev: udev_device_new_from_syspath: device 0x8157068 has devpath '/devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0'
libudev: udev_monitor_receive_device: unable to receive message
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Kod: Zaznacz cały

xmen:/home/recian# lspci 
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
08:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)

Program Hal usunąłem, jednak nic to nie dało. Czy miał ktoś taki przypadek?

[mati75]

Wersja Debiana?

[mtp]

Co wyświetla polecenie:

Kod: Zaznacz cały

dmesg

po podłączeniu dysku pendrive?

[pone13]

I wynik polecenia (jako root):

Kod: Zaznacz cały

tail -n 50 /var/log/syslog

[recian]

Kod: Zaznacz cały

xmen:/home/recian# cat /etc/debian_version jessie/sid

Kod: Zaznacz cały

tail -n 50 /var/log/syslog

Pusty.

Kod: Zaznacz cały

recian@xmen:~$ dmesg 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10-3-686-pae ([email protected]) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf6cffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf6d0000-0x00000000bf6defff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf6df000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: FUJITSU SIEMENS ESPRIMO Mobile V5505           /ESPRIMO Mobile V5505           , BIOS R01-A0Y    12/06/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbf6d0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BF700000 mask FFFF00000 uncachable
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f7a80-0x000f7a8f] mapped at [c00f7a80]
[    0.000000] initial memory mapped: [mem 0x00000000-0x019fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000]  [mem 0x37600000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
[    0.000000]  [mem 0x34000000-0x375fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000]  [mem 0x37800000-0x379fdfff] page 4k
[    0.000000] BRK [0x01597000, 0x01597fff] PGTABLE
[    0.000000] BRK [0x01598000, 0x01599fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3698a000-0x374bcfff]
[    0.000000] ACPI: RSDP 000f7880 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT bf6d28fe 0008C (v01 FSC    PC       06040000  LTP 00000000)
[    0.000000] ACPI: FACP bf6dbc3a 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT bf6d3f1c 07CAA (v02 WS     C46_____ 06040000 MSFT 03000000)
[    0.000000] ACPI: FACS bf6defc0 00040
[    0.000000] ACPI: HPET bf6dbd2e 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG bf6dbd66 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: TCPA bf6dbda2 00032 (v01 Intel   CRESTLN 06040000      00005A52)
[    0.000000] ACPI: TMOR bf6dbdd4 00026 (v01 PTLTD           06040000 PTL  00000003)
[    0.000000] ACPI: SLIC bf6dbdfa 00176 (v01 FSC    PC       06040000 PTL  00000001)
[    0.000000] ACPI: APIC bf6dbf70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT bf6dbfd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT bf6d3c3f 002DD (v01 SataRe SataAhci 00001000 INTL 20060912)
[    0.000000] ACPI: SSDT bf6d3aa2 0019D (v01 BrtRef  DD01BRT 00001000 INTL 20060912)
[    0.000000] ACPI: SSDT bf6d2f16 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT bf6d2e70 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT bf6d298a 004E6 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: DMI detected: Fujitsu Siemens
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2172MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] BRK [0x0159a000, 0x0159afff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x379fdfff]
[    0.000000]   HighMem  [mem 0x379fe000-0xbf6cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbf6cffff]
[    0.000000] On node 0 totalpages: 783982
[    0.000000] free_area_init_node: node 0, pgdat c147f040, node_mem_map f519a020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4346 pages used for memmap
[    0.000000]   HighMem zone: 556242 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79d0000 s34432 r0 d22912 u57344
[    0.000000] pcpu-alloc: s34432 r0 d22912 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 782202
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-3-686-pae root=UUID=6fb26872-6ce4-4179-8c88-fe4a8ba1a60f ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:000bf6d0)
[    0.000000] Memory: 3093160k/3136320k available (3075k kernel code, 42768k reserved, 1566k data, 460k init, 2224968k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd34000 - 0xfffff000   (2860 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc1489000 - 0xc14fc000   ( 460 kB)
[    0.000000]       .data : 0xc1300dbc - 0xc14886c0   (1566 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1300dbc   (3075 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f4c06000 soft=f4c08000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.393 MHz processor
[    0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.78 BogoMIPS (lpj=6649572)
[    0.004006] pid_max: default: 32768 minimum: 301
[    0.004049] Security Framework initialized
[    0.004054] AppArmor: AppArmor disabled by boot time parameter
[    0.004056] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004077] Mount-cache hash table entries: 512
[    0.008068] Initializing cgroup subsys memory
[    0.008081] Initializing cgroup subsys devices
[    0.008084] Initializing cgroup subsys freezer
[    0.008087] Initializing cgroup subsys net_cls
[    0.008090] Initializing cgroup subsys blkio
[    0.008092] Initializing cgroup subsys perf_event
[    0.008128] CPU: Physical Processor ID: 0
[    0.008130] CPU: Processor Core ID: 0
[    0.008134] mce: CPU supports 6 MCE banks
[    0.008141] CPU0: Thermal monitoring handled by SMI
[    0.008152] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.008152] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.008152] tlb_flushall_shift: -1
[    0.008237] Freeing SMP alternatives: 8k freed
[    0.008714] ACPI: Core revision 20130328
[    0.014125] ACPI: All ACPI Tables successfully acquired
[    0.016075] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.016531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057955] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T5450  @ 1.66GHz (fam: 06, model: 0f, stepping: 0d)
[    0.060000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.060000] perf_event_intel: PEBS disabled due to CPU errata
[    0.060000] ... version:                2
[    0.060000] ... bit width:              40
[    0.060000] ... generic registers:      2
[    0.060000] ... value mask:             000000ffffffffff
[    0.060000] ... max period:             000000007fffffff
[    0.060000] ... fixed-purpose events:   3
[    0.060000] ... event mask:             0000000700000003
[    0.060000] CPU 1 irqstacks, hard=f4cae000 soft=f4cb0000
[    0.060000] smpboot: Booting Node   0, Processors  #1 OK
[    0.008000] Initializing CPU#1
[    0.008000] CPU1: Thermal monitoring handled by SMI
[    0.068047] Brought up 2 CPUs
[    0.068054] smpboot: Total of 2 processors activated (6649.57 BogoMIPS)
[    0.068149] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072069] devtmpfs: initialized
[    0.072255] PM: Registering ACPI NVS region [mem 0xbf6d0000-0xbf6defff] (61440 bytes)
[    0.072298] regulator-dummy: no parameters
[    0.072380] NET: Registered protocol family 16
[    0.072541] ACPI: bus type PCI registered
[    0.072546] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.072628] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.072632] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.072634] PCI: Using MMCONFIG for extended config space
[    0.072637] PCI: Using configuration type 1 for base access
[    0.072753] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.072755] mtrr: probably your BIOS does not setup all CPUs.
[    0.072757] mtrr: corrected configuration.
[    0.072757] bio: create slab <bio-0> at 0
[    0.072757] ACPI: Added _OSI(Module Device)
[    0.072757] ACPI: Added _OSI(Processor Device)
[    0.072757] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.072757] ACPI: Added _OSI(Processor Aggregator Device)
[    0.072757] ACPI: Deleted _OSI(Windows 2006)
[    0.072757] ACPI: Deleted _OSI(Windows 2006 SP1)
[    0.072757] ACPI: Deleted _OSI(Windows 2006 SP2)
[    0.073638] ACPI: EC: Look up EC in DSDT
[    0.079007] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.079913] ACPI: SSDT bf6d37e4 001F6 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.080306] ACPI: Dynamic OEM Table Load:
[    0.080310] ACPI: SSDT   (null) 001F6 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.080459] ACPI: SSDT bf6d3175 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.080820] ACPI: Dynamic OEM Table Load:
[    0.080824] ACPI: SSDT   (null) 005EA (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.081125] ACPI: SSDT bf6d39da 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20060912)
[    0.081499] ACPI: Dynamic OEM Table Load:
[    0.081502] ACPI: SSDT   (null) 000C8 (v01  PmRef  Cpu1Ist 00003000 INTL 20060912)
[    0.081598] ACPI: SSDT bf6d375f 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060912)
[    0.081960] ACPI: Dynamic OEM Table Load:
[    0.081964] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060912)
[    1.080105] ACPI: Interpreter enabled
[    1.080125] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    1.080132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    1.080153] ACPI: (supports S0 S3 S4 S5)
[    1.080156] ACPI: Using IOAPIC for interrupt routing
[    1.080196] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    1.080332] ACPI: No dock devices found.
[    1.596853] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.597697] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    1.597702] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    1.597707] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    1.597712] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    1.597716] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    1.597720] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    1.597724] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    1.597729] acpi PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
[    1.597733] acpi PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
[    1.597736] PCI: root bus 00: using default resources
[    1.597929] PCI host bridge to bus 0000:00
[    1.597934] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.597938] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    1.597942] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    1.597956] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    1.598114] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[    1.598134] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc0fffff 64bit]
[    1.598146] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.598155] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
[    1.598296] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[    1.598313] pci 0000:00:02.1: reg 10: [mem 0xfc100000-0xfc1fffff 64bit]
[    1.598511] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    1.598578] pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
[    1.598703] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.598755] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    1.598821] pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
[    1.598948] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    1.599018] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    1.599047] pci 0000:00:1a.7: reg 10: [mem 0xfc404800-0xfc404bff]
[    1.599170] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    1.599251] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    1.599319] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    1.599347] pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit]
[    1.599468] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.599554] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.599614] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    1.599742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.599880] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    1.600010] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.600151] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[    1.600277] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.600417] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[    1.600545] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.600685] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    1.600751] pci 0000:00:1d.0: reg 20: [io  0x1860-0x187f]
[    1.600874] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.600927] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    1.600992] pci 0000:00:1d.1: reg 20: [io  0x1880-0x189f]
[    1.601116] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    1.601171] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    1.601237] pci 0000:00:1d.2: reg 20: [io  0x18a0-0x18bf]
[    1.601361] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    1.601431] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    1.601460] pci 0000:00:1d.7: reg 10: [mem 0xfc404c00-0xfc404fff]
[    1.601583] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.601665] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    1.601723] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    1.601925] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    1.602052] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    1.602061] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    1.602069] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0068 (mask 0007)
[    1.602229] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    1.602250] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    1.602265] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    1.602280] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    1.602294] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    1.602309] pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
[    1.602462] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    1.602494] pci 0000:00:1f.2: reg 10: [io  0x1c00-0x1c07]
[    1.602509] pci 0000:00:1f.2: reg 14: [io  0x18d4-0x18d7]
[    1.602524] pci 0000:00:1f.2: reg 18: [io  0x18d8-0x18df]
[    1.602539] pci 0000:00:1f.2: reg 1c: [io  0x18d0-0x18d3]
[    1.602554] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
[    1.602569] pci 0000:00:1f.2: reg 24: [mem 0xfc404000-0xfc4047ff]
[    1.602646] pci 0000:00:1f.2: PME# supported from D3hot
[    1.602775] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    1.602795] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[    1.602844] pci 0000:00:1f.3: reg 20: [io  0x1c20-0x1c3f]
[    1.603117] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    1.603147] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    1.603196] pci 0000:02:00.0: reg 18: [mem 0xf6000000-0xf6000fff 64bit]
[    1.603251] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    1.603374] pci 0000:02:00.0: supports D1 D2
[    1.603378] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    1.603420] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.603469] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.603486] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    1.603493] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.603500] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    1.603511] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.603615] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    1.603622] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    1.603629] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    1.603640] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    1.603810] pci 0000:08:00.0: [8086:4222] type 00 class 0x028000
[    1.603870] pci 0000:08:00.0: reg 10: [mem 0xfa000000-0xfa000fff]
[    1.604311] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    1.604394] pci 0000:08:00.0: System wakeup disabled by ACPI
[    1.604446] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.604488] pci 0000:00:1c.2: PCI bridge to [bus 08-09]
[    1.604495] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    1.604502] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    1.604513] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    1.604617] pci 0000:00:1c.3: PCI bridge to [bus 0a-0b]
[    1.604624] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    1.604632] pci 0000:00:1c.3:   bridge window [mem 0xc8000000-0xc9ffffff]
[    1.604642] pci 0000:00:1c.3:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[    1.604781] pci 0000:00:1e.0: PCI bridge to [bus 10] (subtractive decode)
[    1.604798] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    1.604803] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    1.604841] pci_bus 0000:00: on NUMA node 0
[    1.604846] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    1.604850] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    1.605473] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.605564] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.605652] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.605739] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.605826] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.605913] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.606000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.606087] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    2.108285] ACPI: Enabled 4 GPEs in block 00 to 1F
[    2.108296] acpi root: \_SB_.PCI0 notify handler is installed
[    2.108355] Found 1 acpi root devices
[    2.108436] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    2.108508] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    2.108508] vgaarb: loaded
[    2.108508] vgaarb: bridge control possible 0000:00:02.0
[    2.108508] PCI: Using ACPI for IRQ routing
[    2.121843] PCI: pci_cache_line_size set to 64 bytes
[    2.121942] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    2.121947] e820: reserve RAM buffer [mem 0xbf6d0000-0xbfffffff]
[    2.122117] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    2.122126] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    2.122132] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    2.124017] Switching to clocksource hpet
[    2.126396] pnp: PnP ACPI init
[    2.126416] ACPI: bus type PNP registered
[    2.126612] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.126618] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    2.126623] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.126628] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.126632] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    2.126637] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.126642] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    2.126647] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.127199] pnp 00:01: [dma 4]
[    2.127241] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    2.127291] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    2.127436] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    2.127441] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    2.127504] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    2.127597] system 00:05: [io  0x0800-0x080f] has been reserved
[    2.127602] system 00:05: [io  0x1000-0x107f] has been reserved
[    2.127607] system 00:05: [io  0x1180-0x11bf] has been reserved
[    2.127611] system 00:05: [io  0xfe00] has been reserved
[    2.127616] system 00:05: [mem 0xff800000-0xff800fff] has been reserved
[    2.127621] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.127676] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.129368] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    2.129428] pnp 00:08: Plug and Play ACPI device, IDs SYN0301 SYN0300 SYN0002 PNP0f13 (active)
[    2.129454] pnp: PnP ACPI: found 9 devices
[    2.129456] ACPI: bus type PNP unregistered
[    2.129461] PnPBIOS: Disabled by ACPI PNP
[    2.167243] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff]
[    2.167255] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
[    2.167259] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    2.167265] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    2.167273] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    2.167281] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    2.167291] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    2.167297] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    2.167305] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    2.167312] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    2.167323] pci 0000:00:1c.2: PCI bridge to [bus 08-09]
[    2.167328] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    2.167337] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    2.167344] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    2.167354] pci 0000:00:1c.3: PCI bridge to [bus 0a-0b]
[    2.167360] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    2.167368] pci 0000:00:1c.3:   bridge window [mem 0xc8000000-0xc9ffffff]
[    2.167375] pci 0000:00:1c.3:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[    2.167386] pci 0000:00:1e.0: PCI bridge to [bus 10]
[    2.168167] pci 0000:00:1e.0: setting latency timer to 64
[    2.168174] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    2.168178] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    2.168182] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    2.168186] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[    2.168190] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    2.168194] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    2.168198] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[    2.168202] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    2.168206] pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
[    2.168210] pci_bus 0000:08: resource 1 [mem 0xfa000000-0xfbffffff]
[    2.168214] pci_bus 0000:08: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[    2.168218] pci_bus 0000:0a: resource 0 [io  0x5000-0x5fff]
[    2.168221] pci_bus 0000:0a: resource 1 [mem 0xc8000000-0xc9ffffff]
[    2.168225] pci_bus 0000:0a: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[    2.168229] pci_bus 0000:10: resource 4 [io  0x0000-0xffff]
[    2.168233] pci_bus 0000:10: resource 5 [mem 0x00000000-0xfffffffff]
[    2.168300] NET: Registered protocol family 2
[    2.168538] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    2.168571] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    2.168604] TCP: Hash tables configured (established 8192 bind 8192)
[    2.168639] TCP: reno registered
[    2.168643] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    2.168654] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    2.168738] NET: Registered protocol family 1
[    2.168754] pci 0000:00:02.0: Boot video device
[    2.171362] PCI: CLS 64 bytes, default 64
[    2.171409] Unpacking initramfs...
[    2.563018] Freeing initrd memory: 11468k freed
[    2.569960] Simple Boot Flag at 0x36 set to 0x1
[    2.570395] audit: initializing netlink socket (disabled)
[    2.570415] type=2000 audit(1382078527.568:1): initialized
[    2.596604] bounce pool size: 64 pages
[    2.596610] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.597080] VFS: Disk quotas dquot_6.5.2
[    2.597120] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.597244] msgmni has been set to 1718
[    2.597567] alg: No test for stdrng (krng)
[    2.597600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.597644] io scheduler noop registered
[    2.597647] io scheduler deadline registered
[    2.597665] io scheduler cfq registered (default)
[    2.597802] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    2.597919] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    2.598034] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    2.598148] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    2.598274] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.598307] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.598430] intel_idle: does not run on family 6 model 15
[    2.598481] GHES: HEST is not enabled!
[    2.598496] isapnp: Scanning for PnP cards...
[    2.952652] isapnp: No Plug & Play device found
[    2.952736] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.953495] Linux agpgart interface v0.103
[    2.953640] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    2.953705] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    2.954313] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    2.954470] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    2.954665] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.965879] i8042: Detected active multiplexing controller, rev 1.1
[    2.972113] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.972122] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.972161] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.972200] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.972232] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.972406] mousedev: PS/2 mouse device common for all mice
[    2.972584] rtc_cmos 00:06: RTC can wake from S4
[    2.972766] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.972804] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.972815] cpuidle: using governor ladder
[    2.972817] cpuidle: using governor menu
[    2.972941] TCP: cubic registered
[    2.972984] NET: Registered protocol family 10
[    2.973247] mip6: Mobile IPv6
[    2.973250] NET: Registered protocol family 17
[    2.973434] Using IPI No-Shortcut mode
[    2.973581] PM: Hibernation image not present or could not be loaded.
[    2.973596] registered taskstats version 1
[    2.974421] rtc_cmos 00:06: setting system clock to 2013-10-18 06:42:09 UTC (1382078529)
[    2.974566] Freeing unused kernel memory: 460k freed
[    2.974784] Write protecting the kernel text: 3076k
[    2.974837] Write protecting the kernel read-only data: 1236k
[    2.974839] NX-protecting the kernel data: 3068k
[    2.990126] systemd-udevd[57]: starting version 204
[    2.995880] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.015618] ACPI: bus type USB registered
[    3.015662] usbcore: registered new interface driver usbfs
[    3.015682] usbcore: registered new interface driver hub
[    3.022864] usbcore: registered new device driver usb
[    3.023375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.023585] ehci-pci: EHCI PCI platform driver
[    3.023846] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    3.023867] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    3.023878] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.023901] ehci-pci 0000:00:1a.7: debug port 1
[    3.027816] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    3.028348] uhci_hcd: USB Universal Host Controller Interface driver
[    3.028590] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc404800
[    3.037521] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.039161] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[    3.039418] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xf8248000, 00:16:d3:85:ef:d1, XID 18000000 IRQ 44
[    3.039423] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    3.040122] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.040157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.040161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.040165] usb usb1: Product: EHCI Host Controller
[    3.040169] usb usb1: Manufacturer: Linux 3.10-3-686-pae ehci_hcd
[    3.040172] usb usb1: SerialNumber: 0000:00:1a.7
[    3.040347] hub 1-0:1.0: USB hub found
[    3.040354] hub 1-0:1.0: 4 ports detected
[    3.040806] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    3.040820] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    3.040832] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.040851] ehci-pci 0000:00:1d.7: debug port 1
[    3.044754] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    3.044824] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc404c00
[    3.056034] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.056099] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.056103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.056107] usb usb2: Product: EHCI Host Controller
[    3.056111] usb usb2: Manufacturer: Linux 3.10-3-686-pae ehci_hcd
[    3.056115] usb usb2: SerialNumber: 0000:00:1d.7
[    3.056293] hub 2-0:1.0: USB hub found
[    3.056300] hub 2-0:1.0: 6 ports detected
[    3.057055] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.057061] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.057071] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    3.057126] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    3.057174] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.057179] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.057182] usb usb3: Product: UHCI Host Controller
[    3.057186] usb usb3: Manufacturer: Linux 3.10-3-686-pae uhci_hcd
[    3.057190] usb usb3: SerialNumber: 0000:00:1a.0
[    3.057471] hub 3-0:1.0: USB hub found
[    3.057479] hub 3-0:1.0: 2 ports detected
[    3.057800] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.057806] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.057853] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    3.057899] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    3.057949] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.057953] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.057957] usb usb4: Product: UHCI Host Controller
[    3.057960] usb usb4: Manufacturer: Linux 3.10-3-686-pae uhci_hcd
[    3.057964] usb usb4: SerialNumber: 0000:00:1a.1
[    3.058106] hub 4-0:1.0: USB hub found
[    3.058114] hub 4-0:1.0: 2 ports detected
[    3.058445] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.058451] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.058459] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    3.058492] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    3.058538] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.058542] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.058546] usb usb5: Product: UHCI Host Controller
[    3.058549] usb usb5: Manufacturer: Linux 3.10-3-686-pae uhci_hcd
[    3.058553] usb usb5: SerialNumber: 0000:00:1d.0
[    3.058716] hub 5-0:1.0: USB hub found
[    3.058723] hub 5-0:1.0: 2 ports detected
[    3.059032] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.059038] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.059046] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    3.059092] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    3.059137] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.059141] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.059145] usb usb6: Product: UHCI Host Controller
[    3.059148] usb usb6: Manufacturer: Linux 3.10-3-686-pae uhci_hcd
[    3.059152] usb usb6: SerialNumber: 0000:00:1d.1
[    3.059289] hub 6-0:1.0: USB hub found
[    3.059295] hub 6-0:1.0: 2 ports detected
[    3.059646] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.059655] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.059663] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    3.059697] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    3.059743] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.059747] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.059751] usb usb7: Product: UHCI Host Controller
[    3.059755] usb usb7: Manufacturer: Linux 3.10-3-686-pae uhci_hcd
[    3.059758] usb usb7: SerialNumber: 0000:00:1d.2
[    3.059894] hub 7-0:1.0: USB hub found
[    3.059901] hub 7-0:1.0: 2 ports detected
[    3.085653] SCSI subsystem initialized
[    3.093142] ACPI: bus type ATA registered
[    3.098653] libata version 3.00 loaded.
[    3.099172] ata_piix 0000:00:1f.1: version 2.13
[    3.099460] ata_piix 0000:00:1f.1: setting latency timer to 64
[    3.099916] scsi0 : ata_piix
[    3.100479] scsi1 : ata_piix
[    3.100561] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    3.100565] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    3.101171] ahci 0000:00:1f.2: version 3.0
[    3.101428] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    3.101517] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    3.101523] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
[    3.101530] ahci 0000:00:1f.2: setting latency timer to 64
[    3.102514] scsi2 : ahci
[    3.104368] scsi3 : ahci
[    3.104479] scsi4 : ahci
[    3.104587] ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 45
[    3.104593] ata4: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 45
[    3.104597] ata5: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 45
[    3.272405] ata1.00: ATAPI: Optiarc DVD RW AD-7590A, 1.41, max UDMA/33
[    3.288274] ata1.00: configured for UDMA/33
[    3.290452] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590A  1.41 PQ: 0 ANSI: 5
[    3.424038] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.424062] ata5: SATA link down (SStatus 0 SControl 300)
[    3.424090] ata4: SATA link down (SStatus 0 SControl 300)
[    3.568028] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[    3.568033] Switching to clocksource tsc
[    3.588431] ata3.00: unexpected _GTF length (8)
[    3.588737] ata3.00: ATA-8: Hitachi HTS545016B9A300, PBBOC64G, max UDMA/133
[    3.588741] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.591487] ata3.00: unexpected _GTF length (8)
[    3.591793] ata3.00: configured for UDMA/133
[    3.591923] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54501 PBBO PQ: 0 ANSI: 5
[    3.595762] thermal LNXTHERM:00: registered as thermal_zone0
[    3.595767] ACPI: Thermal Zone [TZS0] (53 C)
[    3.601774] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.601779] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.602063] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    3.602266] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    3.602493] sd 2:0:0:0: [sda] Write Protect is off
[    3.602498] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.602538] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.604469] thermal LNXTHERM:01: registered as thermal_zone1
[    3.604474] ACPI: Thermal Zone [TZS1] (57 C)
[    3.605498] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    3.605598] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.965419]  sda: sda1 sda2 sda3
[    3.965924] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.296126] PM: Starting manual resume from disk
[    4.296131] PM: Hibernation image partition 8:3 present
[    4.296133] PM: Looking for hibernation image.
[    4.296281] PM: Image not found (code -22)
[    4.296284] PM: Hibernation image not present or could not be loaded.
[    4.327457] kjournald starting.  Commit interval 5 seconds
[    4.327485] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    4.648257] hub 1-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[    5.520256] hub 1-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[    6.392257] hub 1-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[    6.748059] systemd-udevd[312]: starting version 204
[    7.264257] hub 1-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[    7.264331] hub 1-0:1.0: unable to enumerate USB device on port 3
[    8.652383] [drm] Initialized drm 1.1.0 20060810
[    8.661729] cfg80211: Calling CRDA to update world regulatory domain
[    8.689429] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    8.690339] ACPI: Lid Switch [LID0]
[    8.690423] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    8.690429] ACPI: Sleep Button [SLPB]
[    8.690539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.690543] ACPI: Power Button [PWRF]
[    8.722765] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[    8.722770] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[    8.756023] usb 2-6: new high-speed USB device number 7 using ehci-pci
[    8.777858] iwl3945 0000:08:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[    8.777862] iwl3945 0000:08:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    8.777935] iwl3945 0000:08:00.0: irq 46 for MSI/MSI-X
[    8.848473] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[    8.864492] ACPI: Requesting acpi_cpufreq
[    8.866787] Monitor-Mwait will be used to enter C-1 state
[    8.866798] Monitor-Mwait will be used to enter C-2 state
[    8.866806] Monitor-Mwait will be used to enter C-3 state
[    8.866811] tsc: Marking TSC unstable due to TSC halts in idle
[    8.866826] ACPI: acpi_idle registered with cpuidle
[    8.870833] Switching to clocksource hpet
[    8.950176] ACPI: AC Adapter [ADP1] (on-line)
[    8.996833] wmi: Mapper loaded
[    9.061275] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[    9.061285] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.061291] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    9.061297] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.061299] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    9.061305] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.061308] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.074804] ACPI: Battery Slot [BAT0] (battery present)
[    9.321839] [drm] Memory usable by graphics device = 512M
[    9.321849] i915 0000:00:02.0: setting latency timer to 64
[    9.322092] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    9.322105] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.322107] [drm] Driver supports precise vblank timestamp query.
[    9.322169] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem :o wns=io+mem
[    9.409761] [drm] initialized overlay support
[    9.573982] fbcon: inteldrmfb (fb0) is primary device
[   10.381463] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[   10.389314] i915: fixme: max PWM is zero
[   10.396936] Console: switching to colour frame buffer device 160x50
[   10.404526] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.404530] i915 0000:00:02.0: registered panic notifier
[   10.437620] acpi device:04: registered as cooling_device2
[   10.437721] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.437796] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[   10.439681] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.439909] ACPI Warning: 0x00001c20-0x00001c3f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[   10.439918] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.440430] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   10.586414] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   10.596043] acer_wmi: Acer Laptop ACPI-WMI Extras
[   10.597333] acer_wmi: Brightness must be controlled by acpi video driver
[   10.597606] input: Acer BMA150 accelerometer as /devices/virtual/input/input6
[   10.625920] iTCO_vendor_support: vendor-support=0
[   10.626337] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   10.626373] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   10.626567] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.672960] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   10.679322] platform microcode: firmware: agent aborted loading intel-ucode/06-0f-0d (not found?)
[   10.679564] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[   10.935638] platform microcode: firmware: agent aborted loading intel-ucode/06-0f-0d (not found?)
[   10.935902] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   11.304160] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0, board id: 3655, fw id: 323073
[   11.356762] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[   11.666048] cfg80211: World regulatory domain updated:
[   11.666052] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.666056] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.666059] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.666062] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.666066] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.666069] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.868163] usb 2-6: device descriptor read/64, error -110
[   39.084120] usb 2-6: device descriptor read/64, error -110
[   39.300097] usb 2-6: new high-speed USB device number 8 using ehci-pci
[   41.536574] udevd[361]: timeout 'net.agent'
[   46.097811] Adding 1992056k swap on /dev/sda3.  Priority:-1 extents:1 across:1992056k 
[   46.912632] EXT3-fs (sda1): using internal journal
[   54.412080] usb 2-6: device descriptor read/64, error -110
[   69.628093] usb 2-6: device descriptor read/64, error -110
[   69.844067] usb 2-6: new high-speed USB device number 9 using ehci-pci
[   80.252098] usb 2-6: device not accepting address 9, error -110
[   80.364067] usb 2-6: new high-speed USB device number 10 using ehci-pci
[   90.772158] usb 2-6: device not accepting address 10, error -110
[   90.772319] hub 2-0:1.0: unable to enumerate USB device on port 6
[   91.036188] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[   91.160085] usb 6-2: device descriptor read/64, error -71
[   91.388184] usb 6-2: device descriptor read/64, error -71
[   91.604185] usb 6-2: new low-speed USB device number 3 using uhci_hcd
[   91.728186] usb 6-2: device descriptor read/64, error -71
[   91.956180] usb 6-2: device descriptor read/64, error -71
[   92.172184] usb 6-2: new low-speed USB device number 4 using uhci_hcd
[   92.588066] usb 6-2: device not accepting address 4, error -71
[   92.700054] usb 6-2: new low-speed USB device number 5 using uhci_hcd
[   93.116177] usb 6-2: device not accepting address 5, error -71
[   93.116333] hub 6-0:1.0: unable to enumerate USB device on port 2
[  525.738464] loop: module loaded
[  525.835916] fuse init (API version 7.22)
[  526.245753] kjournald starting.  Commit interval 5 seconds
[  526.246028] EXT3-fs (sda2): using internal journal
[  526.246038] EXT3-fs (sda2): mounted filesystem with ordered data mode
[  528.178731] RPC: Registered named UNIX socket transport module.
[  528.178739] RPC: Registered udp transport module.
[  528.178743] RPC: Registered tcp transport module.
[  528.178747] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  528.246396] FS-Cache: Loaded
[  528.246857] Key type dns_resolver registered
[  528.263685] FS-Cache: Netfs 'nfs' registered for caching
[  528.384356] Installing knfsd (copyright (C) 1996 [EMAIL="[email protected]"][email protected][/EMAIL]).
[  530.479988] apm: BIOS not found.
[  531.812545] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[  534.454946] lp: driver loaded but no devices found
[  534.631903] ppdev: user-space parallel port driver
[  544.021387] r8169 0000:02:00.0 eth0: link down
[  544.021421] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  544.072365] iwl3945 0000:08:00.0: firmware: agent loaded iwlwifi-3945-2.ucode into memory
[  544.072376] iwl3945 0000:08:00.0: loaded firmware version 15.32.2.9
[  544.141158] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  551.944830] wlan0: authenticate with f8:d1:11:89:da:5c
[  551.948150] wlan0: send auth to f8:d1:11:89:da:5c (try 1/3)
[  551.950650] wlan0: authenticated
[  551.950859] iwl3945 0000:08:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[  551.952071] wlan0: associate with f8:d1:11:89:da:5c (try 1/3)
[  551.954945] wlan0: RX AssocResp from f8:d1:11:89:da:5c (capab=0x411 status=0 aid=4)
[  551.956452] wlan0: associated
[  551.956487] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  558.481146] systemd-logind[6498]: New seat seat0.
[  558.527120] systemd-logind[6498]: Watching system buttons on /dev/input/event3 (Power Button)
[  558.527254] systemd-logind[6498]: Watching system buttons on /dev/input/event4 (Video Bus)
[  558.527374] systemd-logind[6498]: Watching system buttons on /dev/input/event1 (Lid Switch)
[  558.527497] systemd-logind[6498]: Watching system buttons on /dev/input/event2 (Sleep Button)
[  558.528303] systemd-logind[6498]: New session 1 of user Debian-gdm.
[  558.528442] systemd-logind[6498]: Linked /tmp/.X11-unix/X0 to /run/user/116/X11-display.
[ 5358.715542] systemd-logind[6498]: New session 2 of user recian.
[ 5358.715711] systemd-logind[6498]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 5389.899620] systemd-logind[6498]: Removed session 1.
[12799.810583] systemd-hostnamed[8301]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[12816.376464] gnome-panel[7576]: segfault at 2 ip b6c6297e sp bff68550 error 4 in libglib-2.0.so.0.3600.4[b6c00000+101000]
[12830.564650] systemd-logind[6498]: New session 3 of user Debian-gdm.
[12830.564818] systemd-logind[6498]: Linked /tmp/.X11-unix/X0 to /run/user/116/X11-display.
[12866.001751] systemd-logind[6498]: New session 4 of user recian.
[15713.777796] gnome-panel[8682]: segfault at b711c9eb ip b6ca1256 sp bf982580 error 7 in libglib-2.0.so.0.3600.4[b6c5f000+101000]
[17801.977965] wlan0: disassociated from f8:d1:11:89:da:5c (Reason: 34)
[17802.020235] wlan0: deauthenticating from f8:d1:11:89:da:5c by local choice (reason=3)
[17802.020290] cfg80211: Calling CRDA to update world regulatory domain
[17802.031032] cfg80211: World regulatory domain updated:
[17802.031039] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[17802.031045] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17802.031051] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17802.031056] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[17802.031061] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17802.031066] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17805.229020] wlan0: authenticate with f8:d1:11:89:da:5c
[17805.231119] wlan0: send auth to f8:d1:11:89:da:5c (try 1/3)
[17805.234980] wlan0: authenticated
[17805.235263] iwl3945 0000:08:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[17805.236139] wlan0: associate with f8:d1:11:89:da:5c (try 1/3)
[17805.239381] wlan0: RX AssocResp from f8:d1:11:89:da:5c (capab=0x411 status=0 aid=4)
[17805.240973] wlan0: associated
[17835.588977] systemd-logind[6498]: Removed session 3.

Ps. Dysk pendrive to najmniejszy problem. Bardziej boli to, że myszka nie działa.
U narzeczonej podobna sytuacja była na Ubuntu. Nawet jak przeinstalowałem system operacyjny na Windows7 problem występuje.

[pone13]

U narzeczonej podobna sytuacja była na Ubuntu. Nawet jak przeinstalowałem system operacyjny na Windows7 problem występuje.

Jeżeli dotyczy to tego samego komputera to niestety ale podejrzewam uszkodzenie sprzętowe, co oznacza, że płyta główna pewnie nadaje się do wymiany.

[Yampress]

Ja ostatnio migrowałem z wersji testowej do stabilnej, właśnie z takich powodów. Straciłem kupę danych, gdyż robiłem kopię zapasową i skopiowałem, a później nagrałem pliki o wielkości 0kb, bo system źle działał z montowaniem cd/pendrive i źle skopiował pliki.

[recian]

Jeżeli dotyczy to tego samego komputera to niestety ale podejrzewam uszkodzenie sprzętowe co oznacza że płyta główna pewnie nadaje się do wymiany.

Na szczęście/nieszczęście jest to inny laptop.

[pone13]

A spróbuj testowo zrobić coś takiego, podłącz pendrive i zrestartuj komputer, a następnie wejdź do 'boot menu' BIOS prawdopodobnie poprzez wciśnięcie klawisza F12.
Jestem ciekaw czy pendirve nie będzie czasami widoczny na liście dostępnych urządzeń. Myślę że to by wykluczało uszkodzenie sprzętowe.

[recian]

W biosie wykrywa pendrive.

Dodane:
Niestety, jak pendrive jest wykrywany, światło w myszce się pali, tak przy Ubuntu LiveCD nie działa myszka. Czy naprawdę czeka mnie najgorsze?

Dodane:
Zrobiłem test i po zmianie dysku na ten z Windows7 myszka dalej nie działa.

Gdy włożę pendrive podczas startu Windows7 to załaduje się on bez problemu. Gdy włożę, gdy system się już załaduje nie jest on widoczny.

Wymiana portu USB również nic nie dała. WinDodane:7 wykrywa jeden z USB jako nieznane. Może to komuś ułatwi pomoc mojej skromnej osobie.

Podobnie jest w Debianie. Pendrive widzi jak włożę go podczas startu systemu.

Dodane:
Dla przyszłych pokoleń: Padł mostek południowy. Konieczna była wymiana.