logitech mx5500 bluetooth adapter

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
wytrzeszcz
Posty: 21
Rejestracja: 12 kwietnia 2009, 20:10
Lokalizacja: Gdynia

logitech mx5500 bluetooth adapter

Post autor: wytrzeszcz »

Witam
Na wstępie powiem że problem dotyczy sabayona z jądrem 3.15.0
Mam zestaw klawiatura i mysz Logitech mx5500
Zestaw ten dziala w techologi bluetooth (Klawiatura i mysz działają) . Debian unstabile umiał użyć dołączonej anteny jako BT niestety sabayon nie chce (tj chce podłączyć telefon i nie mogę bo nie widzi BT w kompie)
Dane :
Menedżer okien : gnome shell

Kod: Zaznacz cały

wytrzeszcz@Bizonkstac ~ $ hcitool device
Devices:

Kod: Zaznacz cały

wytrzeszcz@Bizonkstac ~ $ dmesg | grep -i bluetooth
[  878.399045] Bluetooth: Core ver 2.19
[  878.399066] Bluetooth: HCI device and connection manager initialized
[  878.399075] Bluetooth: HCI socket layer initialized
[  878.399077] Bluetooth: L2CAP socket layer initialized
[  878.399086] Bluetooth: SCO socket layer initialized

Kod: Zaznacz cały

wytrzeszcz@Bizonkstac ~ $ lsusb
Bus 002 Device 006: ID 046d:c71c Logitech, Inc. 
Bus 002 Device 005: ID 046d:c71b Logitech, Inc. 
Bus 002 Device 004: ID 046d:0b06 Logitech, Inc. 
Bus 002 Device 003: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
//EDIT
Cały dmesg

Kod: Zaznacz cały

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.15.0-sabayon ([email protected]) (gcc version 4.7.3 (Gentoo Hardened 4.7.3-r1 p1.4, pie-0.5.5) ) #1 SMP Mon Aug 18 02:55:48 UTC 2014
[    0.000000] Command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-3.15.0-sabayon root=UUID=5c91ee67-89e6-46ee-949d-ab18db3d9bb5 ro resume=/dev/sda5 splash vconsole.font=latarcyrheb-sun16 vconsole.keymap=pl2 vga=791 quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfbdffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfbe0000-0x00000000dfbe1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dfbe2000-0x00000000dfbeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfbf0000-0x00000000dfbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. P55-UD4/P55-UD4, BIOS F2 08/01/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 100000000 mask FE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdfbe0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f56f0-0x000f56ff] mapped at [ffff8800000f56f0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02309000, 0x02309fff] PGTABLE
[    0.000000] BRK [0x0230a000, 0x0230afff] PGTABLE
[    0.000000] BRK [0x0230b000, 0x0230bfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[    0.000000]  [mem 0x11fe00000-0x11fffffff] page 2M
[    0.000000] BRK [0x0230c000, 0x0230cfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
[    0.000000]  [mem 0x11c000000-0x11fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[    0.000000]  [mem 0x100000000-0x11bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdfbdffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xdf9fffff] page 2M
[    0.000000]  [mem 0xdfa00000-0xdfbdffff] page 4k
[    0.000000] RAMDISK: [mem 0x362c4000-0x37159fff]
[    0.000000] ACPI: RSDP 0x00000000000F70A0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000DFBE2040 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000DFBE20C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000DFBE2180 0061AE (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000DFBE0000 000040
[    0.000000] ACPI: HPET 0x00000000DFBE8480 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000DFBE8500 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: EUDS 0x00000000DFBE8540 000000 (v01 GBT             00000000      00000000)
[    0.000000] ACPI: TAMG 0x00000000DFBE8A10 000A32 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 0x00000000DFBE8380 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000DFBE9450 001ADC (v01 INTEL  PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fff7000-0x11fffbfff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x11fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdfbdffff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000] On node 0 totalpages: 1047422
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14256 pages used for memmap
[    0.000000]   DMA32 zone: 912352 pages, LIFO batch:31
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfbe0000-0xdfbe1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfbe2000-0xdfbeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfbf0000-0xdfbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfc00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xdfc00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80320 r8192 d22080 u262144
[    0.000000] pcpu-alloc: s80320 r8192 d22080 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031033
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-3.15.0-sabayon root=UUID=5c91ee67-89e6-46ee-949d-ab18db3d9bb5 ro resume=/dev/sda5 splash vconsole.font=latarcyrheb-sun16 vconsole.keymap=pl2 vga=791 quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4022416K/4189688K available (8777K kernel code, 1025K rwdata, 4192K rodata, 1088K init, 948K bss, 167272K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2665.001 MHz processor
[    0.000011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5330.00 BogoMIPS (lpj=2665001)
[    0.000013] pid_max: default: 32768 minimum: 301
[    0.000020] ACPI: Core revision 20140214
[    0.004023] ACPI: All ACPI Tables successfully acquired
[    0.005884] Security Framework initialized
[    0.005891] AppArmor: AppArmor disabled by boot time parameter
[    0.006106] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006797] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.007095] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.007100] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.007268] Initializing cgroup subsys debug
[    0.007271] Initializing cgroup subsys memory
[    0.007275] Initializing cgroup subsys devices
[    0.007277] Initializing cgroup subsys freezer
[    0.007279] Initializing cgroup subsys net_cls
[    0.007280] Initializing cgroup subsys blkio
[    0.007282] Initializing cgroup subsys bfqio
[    0.007283] Initializing cgroup subsys perf_event
[    0.007285] Initializing cgroup subsys net_prio
[    0.007300] CPU: Physical Processor ID: 0
[    0.007302] CPU: Processor Core ID: 0
[    0.007306] mce: CPU supports 9 MCE banks
[    0.007314] CPU0: Thermal monitoring enabled (TM1)
[    0.007323] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.007421] Freeing SMP alternatives memory: 32K (ffffffff82212000 - ffffffff8221a000)
[    0.008938] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.018934] smpboot: CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
[    0.120356] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.120361] perf_event_intel: CPU erratum AAJ80 worked around
[    0.120363] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.120365] ... version:                3
[    0.120366] ... bit width:              48
[    0.120367] ... generic registers:      4
[    0.120368] ... value mask:             0000ffffffffffff
[    0.120369] ... max period:             000000007fffffff
[    0.120370] ... fixed-purpose events:   3
[    0.120371] ... event mask:             000000070000000f
[    0.120926] x86: Booting SMP configuration:
[    0.120928] .... node  #0, CPUs:      #1 #2 #3
[    0.160724] x86: Booted up 1 node, 4 CPUs
[    0.160728] smpboot: Total of 4 processors activated (21320.00 BogoMIPS)
[    0.163475] devtmpfs: initialized
[    0.166176] PM: Registering ACPI NVS region [mem 0xdfbe0000-0xdfbe1fff] (8192 bytes)
[    0.166249] xor: measuring software checksum speed
[    0.175305]    prefetch64-sse: 11376.000 MB/sec
[    0.185296]    generic_sse: 10036.000 MB/sec
[    0.185297] xor: using function: prefetch64-sse (11376.000 MB/sec)
[    0.185300] pinctrl core: initialized pinctrl subsystem
[    0.185354] regulator-dummy: no parameters
[    0.185406] NET: Registered protocol family 16
[    0.185660] cpuidle: using governor ladder
[    0.185662] cpuidle: using governor menu
[    0.185823] ACPI: bus type PCI registered
[    0.185825] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.186088] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.186091] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.186215] PCI: Using configuration type 1 for base access
[    0.207285] raid6: sse2x1    6933 MB/s
[    0.224266] raid6: sse2x2    8121 MB/s
[    0.241252] raid6: sse2x4    9117 MB/s
[    0.241253] raid6: using algorithm sse2x4 (9117 MB/s)
[    0.241255] raid6: using ssse3x2 recovery algorithm
[    0.241300] ACPI: Added _OSI(Module Device)
[    0.241301] ACPI: Added _OSI(Processor Device)
[    0.241302] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.241304] ACPI: Added _OSI(Processor Aggregator Device)
[    0.244590] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x10, should be 0x0F (20140214/tbprint-218)
[    0.245117] ACPI: Interpreter enabled
[    0.245123] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[    0.245126] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[    0.245137] ACPI: (supports S0 S3 S4 S5)
[    0.245138] ACPI: Using IOAPIC for interrupt routing
[    0.245158] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.249367] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.249372] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.249376] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.249576] PCI host bridge to bus 0000:00
[    0.249579] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.249582] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.249584] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.249586] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.249588] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.249590] pci_bus 0000:00: root bus resource [mem 0xdfc00000-0xfebfffff]
[    0.249599] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[    0.249698] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[    0.249746] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.249817] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[    0.249908] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[    0.250000] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[    0.250089] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[    0.250172] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[    0.250252] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[    0.250351] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.250370] pci 0000:00:1a.0: reg 0x10: [mem 0xfbfff000-0xfbfff3ff]
[    0.250452] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.250494] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.250536] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.250550] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
[    0.250617] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.250656] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.250695] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.250754] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.250794] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.250836] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.250900] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.250940] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.250979] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.251042] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.251082] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.251121] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[    0.251185] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.251225] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.251271] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.251290] pci 0000:00:1d.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[    0.251372] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.251413] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.251452] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.251527] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.251567] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[    0.251726] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[    0.251740] pci 0000:00:1f.2: reg 0x10: [io  0xff00-0xff07]
[    0.251747] pci 0000:00:1f.2: reg 0x14: [io  0xfe00-0xfe03]
[    0.251754] pci 0000:00:1f.2: reg 0x18: [io  0xfd00-0xfd07]
[    0.251761] pci 0000:00:1f.2: reg 0x1c: [io  0xfc00-0xfc03]
[    0.251769] pci 0000:00:1f.2: reg 0x20: [io  0xfb00-0xfb0f]
[    0.251776] pci 0000:00:1f.2: reg 0x24: [io  0xfa00-0xfa0f]
[    0.251867] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.251881] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffd000-0xfbffd0ff 64bit]
[    0.251899] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.251978] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[    0.251992] pci 0000:00:1f.5: reg 0x10: [io  0xf800-0xf807]
[    0.251999] pci 0000:00:1f.5: reg 0x14: [io  0xf700-0xf703]
[    0.252006] pci 0000:00:1f.5: reg 0x18: [io  0xf600-0xf607]
[    0.252013] pci 0000:00:1f.5: reg 0x1c: [io  0xf500-0xf503]
[    0.252020] pci 0000:00:1f.5: reg 0x20: [io  0xf400-0xf40f]
[    0.252028] pci 0000:00:1f.5: reg 0x24: [io  0xf300-0xf30f]
[    0.252158] pci 0000:01:00.0: [10de:05e3] type 00 class 0x030000
[    0.252168] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
[    0.252177] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.252187] pci 0000:01:00.0: reg 0x1c: [mem 0xf6000000-0xf7ffffff 64bit]
[    0.252194] pci 0000:01:00.0: reg 0x24: [io  0xbf00-0xbf7f]
[    0.252201] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.254244] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.254248] pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
[    0.254251] pci 0000:00:03.0:   bridge window [mem 0xf6000000-0xf9ffffff]
[    0.254255] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.254303] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.254388] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.254472] pci 0000:03:00.0: reg 0x24: [mem 0xfbcfe000-0xfbcfffff]
[    0.254537] pci 0000:03:00.0: PME# supported from D3hot
[    0.254602] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.254622] pci 0000:03:00.1: reg 0x10: [io  0xef00-0xef07]
[    0.254632] pci 0000:03:00.1: reg 0x14: [io  0xee00-0xee03]
[    0.254642] pci 0000:03:00.1: reg 0x18: [io  0xed00-0xed07]
[    0.254652] pci 0000:03:00.1: reg 0x1c: [io  0xec00-0xec03]
[    0.254662] pci 0000:03:00.1: reg 0x20: [io  0xeb00-0xeb0f]
[    0.254763] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.254772] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.254776] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.254780] pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.254858] pci 0000:04:00.0: [197b:2363] type 00 class 0x010185
[    0.254942] pci 0000:04:00.0: reg 0x24: [mem 0xfbafe000-0xfbafffff]
[    0.255007] pci 0000:04:00.0: PME# supported from D3hot
[    0.255074] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
[    0.255094] pci 0000:04:00.1: reg 0x10: [io  0xdf00-0xdf07]
[    0.255104] pci 0000:04:00.1: reg 0x14: [io  0xde00-0xde03]
[    0.255114] pci 0000:04:00.1: reg 0x18: [io  0xdd00-0xdd07]
[    0.255124] pci 0000:04:00.1: reg 0x1c: [io  0xdc00-0xdc03]
[    0.255133] pci 0000:04:00.1: reg 0x20: [io  0xdb00-0xdb0f]
[    0.255238] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.255247] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.255250] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.255254] pci 0000:00:1c.5:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.255322] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.255338] pci 0000:05:00.0: reg 0x10: [io  0xce00-0xceff]
[    0.255365] pci 0000:05:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[    0.255382] pci 0000:05:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[    0.255394] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.255470] pci 0000:05:00.0: supports D1 D2
[    0.255472] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.257245] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.257249] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.257253] pci 0000:00:1c.6:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.257258] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.257305] pci 0000:06:07.0: [104c:8024] type 00 class 0x0c0010
[    0.257322] pci 0000:06:07.0: reg 0x10: [mem 0xfbbff000-0xfbbff7ff]
[    0.257331] pci 0000:06:07.0: reg 0x14: [mem 0xfbbf8000-0xfbbfbfff]
[    0.257395] pci 0000:06:07.0: supports D1 D2
[    0.257397] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
[    0.257461] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[    0.257466] pci 0000:00:1e.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.257472] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.257476] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.257478] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.257480] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.257482] pci 0000:00:1e.0:   bridge window [mem 0xdfc00000-0xfebfffff] (subtractive decode)
[    0.257866] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.257912] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.257957] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.258002] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.258047] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.258092] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.258137] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.258183] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.258319] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.258321] vgaarb: loaded
[    0.258322] vgaarb: bridge control possible 0000:01:00.0
[    0.258432] SCSI subsystem initialized
[    0.258462] libata version 3.00 loaded.
[    0.258486] ACPI: bus type USB registered
[    0.258506] usbcore: registered new interface driver usbfs
[    0.258516] usbcore: registered new interface driver hub
[    0.258532] usbcore: registered new device driver usb
[    0.258628] wmi: Mapper loaded
[    0.258661] PCI: Using ACPI for IRQ routing
[    0.259920] PCI: Discovered peer bus 3f
[    0.259921] PCI: root bus 3f: using default resources
[    0.259922] PCI: Probing PCI hardware (bus 3f)
[    0.259945] PCI host bridge to bus 0000:3f
[    0.259948] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.259950] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[    0.259952] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.259955] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
[    0.259960] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[    0.260000] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[    0.260040] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[    0.260079] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[    0.260118] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[    0.260155] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[    0.260193] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[    0.260233] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[    0.260272] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[    0.260310] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[    0.260347] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[    0.260386] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[    0.260423] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[    0.260460] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[    0.260498] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[    0.260545] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.260548] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
[    0.260551] PCI: pci_cache_line_size set to 64 bytes
[    0.260620] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.260621] e820: reserve RAM buffer [mem 0xdfbe0000-0xdfffffff]
[    0.260710] NetLabel: Initializing
[    0.260711] NetLabel:  domain hash size = 128
[    0.260712] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.260723] NetLabel:  unlabeled traffic allowed by default
[    0.260923] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.260929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[    0.260934] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.262968] hpet: hpet2 irq 40 for MSI
[    0.263007] hpet: hpet3 irq 41 for MSI
[    0.263054] hpet: hpet4 irq 42 for MSI
[    0.263094] hpet: hpet5 irq 43 for MSI
[    0.263116] Switched to clocksource hpet
[    0.263162] pnp: PnP ACPI init
[    0.263171] ACPI: bus type PNP registered
[    0.263313] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.263316] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.263318] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.263321] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.263323] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.263326] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263336] pnp 00:01: [dma 4]
[    0.263354] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.263414] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.263451] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.263476] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.263502] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.263733] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.263910] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.264016] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.264076] system 00:09: [io  0x0400-0x04cf] could not be reserved
[    0.264078] system 00:09: [io  0x04d2-0x04ff] has been reserved
[    0.264081] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264262] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.264265] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264427] system 00:0b: [mem 0x000cde00-0x000cffff] has been reserved
[    0.264430] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.264433] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.264435] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.264437] system 00:0b: [mem 0xdfbe0000-0xdfbfffff] could not be reserved
[    0.264440] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.264442] system 00:0b: [mem 0x00100000-0xdfbdffff] could not be reserved
[    0.264444] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.264447] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.264449] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.264451] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.264454] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.264456] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.264458] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[    0.264461] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.264495] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[    0.264499] pnp: PnP ACPI: found 13 devices
[    0.264500] ACPI: bus type PNP unregistered
[    0.271102] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.271106] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.271108] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.271121] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.271129] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.271145] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.271147] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.271150] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.271152] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.271154] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.271159] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfc00000-0xdfdfffff]
[    0.271163] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfe00000-0xdfffffff 64bit pref]
[    0.271168] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.271172] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.271175] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.271178] pci 0000:01:00.0: BAR 6: assigned [mem 0xf9000000-0xf907ffff pref]
[    0.271180] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.271183] pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
[    0.271187] pci 0000:00:03.0:   bridge window [mem 0xf6000000-0xf9ffffff]
[    0.271190] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.271194] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.271196] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.271201] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfdfffff]
[    0.271204] pci 0000:00:1c.0:   bridge window [mem 0xdfe00000-0xdfffffff 64bit pref]
[    0.271210] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.271212] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.271217] pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.271220] pci 0000:00:1c.4:   bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.271225] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.271228] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.271232] pci 0000:00:1c.5:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.271236] pci 0000:00:1c.5:   bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.271241] pci 0000:05:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd1ffff pref]
[    0.271243] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.271246] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.271250] pci 0000:00:1c.6:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.271254] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.271259] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    0.271263] pci 0000:00:1e.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.271270] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.271272] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.271275] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.271277] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.271279] pci_bus 0000:00: resource 8 [mem 0xdfc00000-0xfebfffff]
[    0.271281] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.271283] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
[    0.271285] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.271287] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.271289] pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfdfffff]
[    0.271291] pci_bus 0000:02: resource 2 [mem 0xdfe00000-0xdfffffff 64bit pref]
[    0.271293] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.271295] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.271297] pci_bus 0000:03: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.271299] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.271301] pci_bus 0000:04: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.271303] pci_bus 0000:04: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.271305] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.271307] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.271309] pci_bus 0000:05: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.271312] pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.271314] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.271316] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.271318] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.271320] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[    0.271322] pci_bus 0000:06: resource 8 [mem 0xdfc00000-0xfebfffff]
[    0.271324] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.271326] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.271344] NET: Registered protocol family 2
[    0.271501] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.271603] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.271735] TCP: Hash tables configured (established 32768 bind 32768)
[    0.271753] TCP: reno registered
[    0.271760] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.271789] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.271853] NET: Registered protocol family 1
[    0.294192] pci 0000:01:00.0: Boot video device
[    0.294223] PCI: CLS 64 bytes, default 64
[    0.295018] Trying to unpack rootfs image as initramfs...
[    0.527773] Freeing initrd memory: 14936K (ffff8800362c4000 - ffff88003715a000)
[    0.527778] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.527781] software IO TLB [mem 0xdbbe0000-0xdfbe0000] (64MB) mapped at [ffff8800dbbe0000-ffff8800dfbdffff]
[    0.528579] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.528610] audit: initializing netlink subsys (disabled)
[    0.528623] audit: type=2000 audit(1412262496.421:1): initialized
[    0.528790] bounce pool size: 64 pages
[    0.528803] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.530331] zbud: loaded
[    0.530480] VFS: Disk quotas dquot_6.5.2
[    0.530517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.530556] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.530826] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.530875] QNX4 filesystem 0.2.3 registered.
[    0.531085] aufs 3.x-rcN-20140609
[    0.531088] msgmni has been set to 7885
[    0.531458] async_tx: api initialized (async)
[    0.531510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.531545] io scheduler noop registered
[    0.531547] io scheduler deadline registered
[    0.531591] io scheduler cfq registered
[    0.531621] io scheduler bfq registered (default)
[    0.531622] BFQ I/O-scheduler version: v7r4
[    0.531860] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.532298] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.532315] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.532371] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    0.532372] vesafb: scrolling: redraw
[    0.532374] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.532386] vesafb: framebuffer at 0xf7000000, mapped to 0xffffc90004780000, using 1536k, total 1536k
[    0.584345] Console: switching to colour frame buffer device 128x48
[    0.636231] fb0: VESA VGA frame buffer device
[    0.636245] intel_idle: MWAIT substates: 0x1120
[    0.636251] intel_idle: v0.4 model 0x1E
[    0.636252] intel_idle: lapic_timer_reliable_states 0x2
[    0.636466] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.636470] ACPI: Power Button [PWRB]
[    0.636515] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.636517] ACPI: Power Button [PWRF]
[    0.637102] GHES: HEST is not enabled!
[    0.637104] xenfs: not registering filesystem on non-xen platform
[    0.637163] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.657721] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.659872] brd: module loaded
[    0.660462] loop: module loaded
[    0.660464] HP CISS Driver (v 3.6.26)
[    0.660642] MM: desc_per_page = 128
[    0.660692] Loading iSCSI transport class v2.0-870.
[    0.660818] fnic: Cisco FCoE HBA Driver, ver 1.5.0.45
[    0.660845] fnic: Successfully Initialized Trace Buffer
[    0.660998] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    0.660999] Detecting Adaptec I2O RAID controllers...
[    0.661055] Adaptec aacraid driver 1.2-0[30300]-ms
[    0.661071] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    0.661110] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[    0.661160] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k.
[    0.661190] iscsi: registered transport (qla4xxx)
[    0.661202] QLogic iSCSI HBA Driver
[    0.661203] Emulex LightPulse Fibre Channel SCSI driver 8.3.45
[    0.661204] Copyright(c) 2004-2013 Emulex.  All rights reserved.
[    0.661282] DC390: clustering now enabled by default. If you get problems load
[    0.661283]        with "disable_clustering=1" and report to maintainers
[    0.661308] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    0.661361] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    0.661373] megasas: 06.803.01.00-rc1 Mon. Mar. 10 17:00:00 PDT 2014
[    0.661389] mpt2sas version 16.100.00.00 loaded
[    0.661454] mpt3sas version 02.100.00.00 loaded
[    0.661528] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    0.661553] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    0.661565] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    0.661576] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    0.661587] ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
[    0.661600] RocketRAID 3xxx/4xxx Controller driver v1.8
[    0.661610] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    0.661639] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[    0.661640] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[    0.661641] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[    0.661652] iscsi: registered transport (cxgb3i)
[    0.661653] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4
[    0.661664] iscsi: registered transport (cxgb4i)
[    0.661666] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.6.2 (Jun 06, 2013)
[    0.661675] iscsi: registered transport (bnx2i)
[    0.661897] VMware PVSCSI driver - version 1.0.5.0-k
[    0.661920] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    0.661934] osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    0.661991] ahci 0000:03:00.0: version 3.0
[    0.672951] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.672960] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.673660] scsi0 : ahci
[    0.674301] scsi1 : ahci
[    0.674417] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[    0.674423] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[    0.684941] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.684950] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.685644] scsi2 : ahci
[    0.686188] scsi3 : ahci
[    0.686304] ata3: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe100 irq 17
[    0.686310] ata4: SATA max UDMA/133 abar m8192@0xfbafe000 port 0xfbafe180 irq 17
[    0.686448] ata_piix 0000:00:1f.2: version 2.13
[    0.686528] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.687423] scsi4 : ata_piix
[    0.687833] scsi5 : ata_piix
[    0.687938] ata5: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 17
[    0.687942] ata6: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 17
[    0.688035] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.688835] scsi6 : ata_piix
[    0.689203] scsi7 : ata_piix
[    0.689305] ata7: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 17
[    0.689312] ata8: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 17
[    0.689651] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    0.690406] scsi8 : pata_jmicron
[    0.690660] scsi9 : pata_jmicron
[    0.690703] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 17
[    0.690705] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 17
[    0.690719] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
[    0.691439] scsi10 : pata_jmicron
[    0.691688] scsi11 : pata_jmicron
[    0.691783] ata11: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18
[    0.691785] ata12: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18
[    0.692229] libphy: Fixed MDIO Bus: probed
[    0.692245] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.20 (March 14, 2014)
[    0.692554] I2O subsystem v1.325
[    0.692555] i2o: max drivers = 8
[    0.692750] I2O Configuration OSM v1.323
[    0.692797] I2O Bus Adapter OSM v1.317
[    0.692802] I2O Block Device OSM v1.325
[    0.693012] I2O SCSI Peripheral OSM v1.316
[    0.693030] I2O ProcFS OSM v1.316
[    0.693047] Fusion MPT base driver 3.04.20
[    0.693049] Copyright (c) 1999-2008 LSI Corporation
[    0.693058] Fusion MPT SPI Host driver 3.04.20
[    0.693094] Fusion MPT FC Host driver 3.04.20
[    0.693130] Fusion MPT SAS Host driver 3.04.20
[    0.693168] Fusion MPT misc device (ioctl) driver 3.04.20
[    0.693299] mptctl: Registered with Fusion MPT base driver
[    0.693304] mptctl: /dev/mptctl @ (major,minor=10,220)
[    0.693307] Fusion MPT LAN driver 3.04.20
[    0.693465] usbcore: registered new interface driver usb-storage
[    0.693483] usbcore: registered new interface driver ums-alauda
[    0.693503] usbcore: registered new interface driver ums-cypress
[    0.693518] usbcore: registered new interface driver ums-datafab
[    0.693535] usbcore: registered new interface driver ums-freecom
[    0.693541] usbcore: registered new interface driver ums-isd200
[    0.693546] usbcore: registered new interface driver ums-jumpshot
[    0.693552] usbcore: registered new interface driver ums-karma
[    0.693558] usbcore: registered new interface driver ums-onetouch
[    0.693565] usbcore: registered new interface driver ums-sddr09
[    0.693570] usbcore: registered new interface driver ums-sddr55
[    0.693576] usbcore: registered new interface driver ums-usbat
[    0.693605] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.693606] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.693734] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.693980] mousedev: PS/2 mouse device common for all mice
[    0.694312] rtc_cmos 00:03: RTC can wake from S4
[    0.694466] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.694490] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.694498] md: linear personality registered for level -1
[    0.694499] md: raid0 personality registered for level 0
[    0.694500] md: raid1 personality registered for level 1
[    0.694501] md: raid10 personality registered for level 10
[    0.694627] md: raid6 personality registered for level 6
[    0.694628] md: raid5 personality registered for level 5
[    0.694629] md: raid4 personality registered for level 4
[    0.694631] md: multipath personality registered for level -4
[    0.694632] md: faulty personality registered for level -5
[    0.694723] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[    0.694840] device-mapper: raid: Loading target version 1.5.2
[    0.694847] ledtrig-cpu: registered to indicate activity on CPUs
[    0.694874] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    0.694886] hidraw: raw HID events driver (C) Jiri Kosina
[    0.695045] usbcore: registered new interface driver usbhid
[    0.695046] usbhid: USB HID core driver
[    0.695319] ashmem: initialized
[    0.695451] TCP: bic registered
[    0.695453] NET: Registered protocol family 17
[    0.695467] Key type dns_resolver registered
[    0.695834] registered taskstats version 1
[    0.696328] Btrfs loaded
[    0.705906] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.978876] ata1: SATA link down (SStatus 0 SControl 300)
[    0.978917] ata2: SATA link down (SStatus 0 SControl 300)
[    0.990753] ata3: SATA link down (SStatus 0 SControl 300)
[    0.990792] ata4: SATA link down (SStatus 0 SControl 300)
[    1.004486] ata7: SATA link down (SStatus 0 SControl 300)
[    1.144630] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.147856] ata8.00: ATAPI: HL-DT-ST BD-RE  BH08LS20, 1.00, max UDMA/133
[    1.169806] ata8.00: configured for UDMA/133
[    1.317220] ata6.00: SATA link down (SStatus 0 SControl 300)
[    1.317233] ata6.01: SATA link down (SStatus 0 SControl 300)
[    1.448433] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.448449] ata5.01: SATA link down (SStatus 0 SControl 300)
[    1.451811] ata5.00: ATA-8: ST31000528AS, CC37, max UDMA/133
[    1.451818] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.457854] ata5.00: configured for UDMA/133
[    1.458201] scsi 4:0:0:0: Direct-Access     ATA      ST31000528AS     CC37 PQ: 0 ANSI: 5
[    1.458820] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.458824] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    1.459137] sd 4:0:0:0: [sda] Write Protect is off
[    1.459145] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.459256] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.463851] scsi 7:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH08LS20  1.00 PQ: 0 ANSI: 5
[    1.499259]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.500759] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.501404] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.501409] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.501674] sr 7:0:0:0: Attached scsi CD-ROM sr0
[    1.501843] sr 7:0:0:0: Attached scsi generic sg1 type 5
[    1.529315] tsc: Refined TSC clocksource calibration: 2664.772 MHz
[    1.837568] Freeing unused kernel memory: 1088K (ffffffff82102000 - ffffffff82212000)
[    1.837570] Write protecting the kernel read-only data: 16384k
[    1.840660] Freeing unused kernel memory: 1452K (ffff880001895000 - ffff880001a00000)
[    1.844165] Freeing unused kernel memory: 1952K (ffff880001e18000 - ffff880002000000)
[    1.978727] systemd-udevd[544]: starting version 208
[    1.993420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.993520] ehci-pci: EHCI PCI platform driver
[    1.993669] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.993722] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.993735] ehci-pci 0000:00:1a.0: debug port 2
[    1.997662] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.997669] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbfff000
[    2.002903] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.002941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.002943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.002945] usb usb1: Product: EHCI Host Controller
[    2.002947] usb usb1: Manufacturer: Linux 3.15.0-sabayon ehci_hcd
[    2.002949] usb usb1: SerialNumber: 0000:00:1a.0
[    2.003073] hub 1-0:1.0: USB hub found
[    2.003079] hub 1-0:1.0: 2 ports detected
[    2.003258] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.003309] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.003321] ehci-pci 0000:00:1d.0: debug port 2
[    2.007243] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.007257] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffe000
[    2.012909] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.012958] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.012960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.012962] usb usb2: Product: EHCI Host Controller
[    2.012964] usb usb2: Manufacturer: Linux 3.15.0-sabayon ehci_hcd
[    2.012966] usb usb2: SerialNumber: 0000:00:1d.0
[    2.013087] hub 2-0:1.0: USB hub found
[    2.013094] hub 2-0:1.0: 2 ports detected
[    2.304831] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.325977] random: nonblocking pool is initialized
[    2.419104] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    2.419111] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.419516] hub 1-1:1.0: USB hub found
[    2.419721] hub 1-1:1.0: 6 ports detected
[    2.522626] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.528801] Switched to clocksource tsc
[    2.636928] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.636931] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.637356] hub 2-1:1.0: USB hub found
[    2.637522] hub 2-1:1.0: 8 ports detected
[    2.877617] scsi12 : pata_legacy
[    2.877687] ata13: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    2.912474] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    3.029070] scsi13 : pata_legacy
[    3.029122] ata14: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    3.193504] usb 2-1.1: New USB device found, idVendor=1307, idProduct=0330
[    3.193507] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.193509] usb 2-1.1: Product: Mass Storage Device
[    3.193511] usb 2-1.1: Manufacturer: Generic   
[    3.193513] usb 2-1.1: SerialNumber: 00000000000006
[    3.193768] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[    3.193858] scsi14 : usb-storage 2-1.1:1.0
[    3.257112] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[    3.344282] usb 2-1.3: New USB device found, idVendor=046d, idProduct=0b06
[    3.344285] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.344287] usb 2-1.3: Product: Logitech BT Mini-Receiver
[    3.344288] usb 2-1.3: Manufacturer: Logitech
[    3.344566] hub 2-1.3:1.0: USB hub found
[    3.344782] hub 2-1.3:1.0: 3 ports detected
[    3.607987] usb 2-1.3.2: new full-speed USB device number 5 using ehci-pci
[    3.621181] scsi: <fdomain> Detection failed (no card)
[    3.690539] usb 2-1.3.2: New USB device found, idVendor=046d, idProduct=c71b
[    3.690541] usb 2-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.690543] usb 2-1.3.2: Product: Logitech BT Mini-Receiver
[    3.690545] usb 2-1.3.2: Manufacturer: Logitech
[    3.690547] usb 2-1.3.2: SerialNumber: 000761A4B0CF
[    3.694799] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/0003:046D:C71B.0001/input/input3
[    3.694887] hid-generic 0003:046D:C71B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.3.2/input0
[    3.752982] imm: Version 2.05 (for Linux 2.4.0)
[    3.767863] usb 2-1.3.3: new full-speed USB device number 6 using ehci-pci
[    3.859915] usb 2-1.3.3: New USB device found, idVendor=046d, idProduct=c71c
[    3.859917] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.859919] usb 2-1.3.3: Product: Logitech BT Mini-Receiver
[    3.859921] usb 2-1.3.3: Manufacturer: Logitech
[    3.859923] usb 2-1.3.3: SerialNumber: 000761A4B0CF
[    3.867306] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.0/0003:046D:C71C.0002/input/input4
[    3.867617] hid-generic 0003:046D:C71C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.3.3/input0
[    4.011574] uhci_hcd: USB Universal Host Controller Interface driver
[    4.013070] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.013178] ohci-pci: OHCI PCI platform driver
[    4.196197] scsi 14:0:0:0: Direct-Access     Generic  Compact Flash    0.00 PQ: 0 ANSI: 2
[    4.196695] scsi 14:0:0:1: Direct-Access     Generic  SD/MMC           0.00 PQ: 0 ANSI: 2
[    4.197207] scsi 14:0:0:2: Direct-Access     Generic  MS/MS-PRO        0.00 PQ: 0 ANSI: 2
[    4.197835] scsi 14:0:0:3: Direct-Access     Generic  SM/xD-Picture    0.00 PQ: 0 ANSI: 2
[    4.203598] sd 14:0:0:0: Attached scsi generic sg2 type 0
[    4.203770] sd 14:0:0:1: Attached scsi generic sg3 type 0
[    4.203992] sd 14:0:0:2: Attached scsi generic sg4 type 0
[    4.204161] sd 14:0:0:3: Attached scsi generic sg5 type 0
[    4.220546] sd 14:0:0:0: [sdb] Attached SCSI removable disk
[    4.221131] sd 14:0:0:1: [sdc] Attached SCSI removable disk
[    4.221774] sd 14:0:0:2: [sdd] Attached SCSI removable disk
[    4.222400] sd 14:0:0:3: [sde] Attached SCSI removable disk
[    4.352552] JFS: nTxBlock = 8192, nTxLock = 65536
[    4.356493] RPC: Registered named UNIX socket transport module.
[    4.356495] RPC: Registered udp transport module.
[    4.356496] RPC: Registered tcp transport module.
[    4.356497] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.361007] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    4.370803] fuse init (API version 7.23)
[    4.372890] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    4.372892] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    4.374304] pps_core: LinuxPPS API ver. 1 registered
[    4.374306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    4.374514] PTP clock support registered
[    4.392099] iscsi: registered transport (tcp)
[    4.509398] PM: Starting manual resume from disk
[    4.653194] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[    4.653196] EXT4-fs (sda7): write access will be enabled during recovery
[    4.990170] EXT4-fs (sda7): recovery complete
[    4.996340] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    5.780058] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA -SYSVINIT +LIBCRYPTSETUP -GCRYPT +ACL +XZ)
[    5.963854] NET: Registered protocol family 10
[    5.964393] systemd[1]: Inserted module 'ipv6'
[    5.973510] systemd[1]: Set hostname to <sabayon.local>.
[    6.616224] systemd[1]: ip6tables.service lacks ExecStart setting. Refusing.
[    6.617383] systemd[1]: iptables.service lacks ExecStart setting. Refusing.
[    6.881314] systemd[1]: Mounted /.
[    6.881569] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.881613] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.881621] systemd[1]: Starting Remote File Systems.
[    6.882174] systemd[1]: Reached target Remote File Systems.
[    6.882183] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.882877] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.882885] systemd[1]: Starting Delayed Shutdown Socket.
[    6.883499] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.883508] systemd[1]: Starting Encrypted Volumes.
[    6.884039] systemd[1]: Reached target Encrypted Volumes.
[    6.884048] systemd[1]: Starting Journal Socket.
[    6.884606] systemd[1]: Listening on Journal Socket.
[    6.896052] systemd[1]: Starting Load Kernel Modules...
[    6.896886] systemd[1]: Mounting POSIX Message Queue File System...
[    6.897682] systemd[1]: Starting Journal Service...
[    6.898805] systemd[1]: Started Journal Service.
[    6.975718] systemd-journald[1504]: Vacuuming done, freed 0 bytes
[    7.387513] Adding 8390652k swap on /dev/sda5.  Priority:-1 extents:1 across:8390652k FS
[    8.107044] systemd-udevd[1544]: starting version 208
[    9.089859] usbcore: registered new interface driver uas
[    9.124317] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C)
[    9.125032] parport_pc 00:07: reported by Plug and Play ACPI
[    9.125075] parport0: PC-style at 0x378
[    9.125076] , irq 7
[    9.125076]  [
[    9.125076] PCSPP
[    9.125077] ,TRISTATE
[    9.125077] ]
[    9.165229]  (20140214/utaddress-258)
[    9.165230] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.165256] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.165278] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.312738] EXT4-fs (sda7): re-mounted. Opts: (null)
[    9.349543] Linux agpgart interface v0.103
[    9.359617] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    9.416431] [drm] Initialized drm 1.1.0 20060810
[    9.421536] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x3
[    9.734710] EDAC MC: Ver: 3.0.0
[    9.735459] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[    9.735499] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[    9.735503] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[    9.778002] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    9.778010] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.799165] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[    9.799305] r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0xffffc900066d8000, 00:24:1d:7e:2b:ea, XID 083000c0 IRQ 45
[    9.799308] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    9.799440] firewire_ohci 0000:06:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    9.866915] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    9.923406] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    9.996381] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x3
[    9.996420] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x3
[    9.996449] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x3
[    9.996511] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   10.181780] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   10.321038] firewire_core 0000:06:07.0: created device fw0: GUID 007a5dfa0000241d, S400
[   10.367387] nvidia: module license 'NVIDIA' taints kernel.
[   10.390283] Disabling lock debugging due to kernel taint
[   10.410880] ppdev: user-space parallel port driver
[   10.423164] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none :o wns=none
[   10.423460] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[   10.423467] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.32  Tue Aug  5 20:58:26 PDT 2014
[   10.625578] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
[   10.928562] snd_hda_intel 0000:00:1b.0: Codec #3 probe error; disabling it...
[   10.984816] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   10.984817] sound hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.984819] sound hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.984820] sound hdaudioC0D2:    mono: mono_out=0x0
[   10.984821] sound hdaudioC0D2:    dig-out=0x1e/0x0
[   10.984822] sound hdaudioC0D2:    inputs:
[   10.984824] sound hdaudioC0D2:      Rear Mic=0x18
[   10.984825] sound hdaudioC0D2:      Front Mic=0x19
[   10.984826] sound hdaudioC0D2:      Line=0x1a
[   10.984827] sound hdaudioC0D2:      CD=0x1c
[   10.984828] sound hdaudioC0D2:    dig-in=0x1f
[   10.996977] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input6
[   10.998196] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.998256] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.998312] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.998368] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.998423] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.998477] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.998541] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.121666] iTCO_vendor_support: vendor-support=0
[   11.122163] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.122190] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
[   11.122273] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.184567] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   11.844386] NVRM: Your system is not currently configured to drive a VGA console
[   11.869232] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   11.894008] NVRM: requires the use of a text-mode VGA console. Use of other console
[   11.918854] NVRM: drivers including, but not limited to, vesafb, may result in
[   11.943659] NVRM: corruption and stability problems, and is not supported.
[   12.001964] floppy0: no floppy controllers found
[   12.001978] work still pending
[   12.462936] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.537526] systemd-journald[1504]: Received request to flush runtime journal from PID 1
[   12.766897] systemd-journald[1504]: File /var/log/journal/1d9ca6f7a01046b793069408bb95e461/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   17.353996] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.388733] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   17.407200] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.543923] Ebtables v2.0 registered
[   17.568337] Bridge firewalling registered
[   18.222745] r8169 0000:05:00.0 eth0: link down
[   18.222754] r8169 0000:05:00.0 eth0: link down
[   18.222774] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.262606] r8169 0000:05:00.0 eth0: link up
[   20.262622] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.300194] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
Awatar użytkownika
Rafal_F
Moderator
Posty: 2350
Rejestracja: 29 sierpnia 2008, 16:45

Post autor: Rafal_F »

Wklej cały wynik z dmesg.
ODPOWIEDZ