Polskie Forum Użytkowników Debiana

Witam mam problem jak w temacie.Wczoraj postawiłem jessie amd64 na laptopie MSI GX700 Intel Core2 Duo CPU T7500. Zadowolony,że wszystko hula przystąpiłem do konfiguracji i zrobienia go pod siebie.Wstaje rano komp wyłączony,patrze w ustawienia zasilania i nie powinien się wyłączyć.Dziś dwukrotnie podczas pracy w konsoli komputer się wyłączył.Grzebałem w logach i są jakieś niuanse,które raczej nie powinny zamykać systemu.Proszę o pomoc.Jakich logów potrzebujecie?

edit.
znalazłem w deamon.log

Kod: Zaznacz cały

Mar  4 15:20:17 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:20:17 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:23:17 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:23:17 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:24:47 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:24:47 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:25:23 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:25:23 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:30:29 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:30:29 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:30:30 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:30:30 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:30:39 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:30:39 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:30:39 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:30:39 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:30:40 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:30:40 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:37:41 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:37:41 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:38:18 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:38:18 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:39:00 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:39:00 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:39:01 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:39:01 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:39:01 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:39:01 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:39:04 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:39:04 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:44:28 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:44:28 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:44:28 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:44:28 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:44:29 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:44:29 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:45:38 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:45:38 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:45:39 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:45:39 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:45:40 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:45:40 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:49:41 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:49:41 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:49:42 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:49:42 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:50:51 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:50:51 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:50:51 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:50:51 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:50:52 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:50:52 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:51:54 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:51:54 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:55:29 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:55:29 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:58:51 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:58:51 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:58:52 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:58:52 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:59:26 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:59:26 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 15:59:27 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 15:59:27 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 16:06:07 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 16:06:07 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 16:06:35 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 16:06:35 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 16:23:26 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: treating change event as add on /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0A:00/power_supply/BAT1
Mar  4 16:23:26 debian upowerd[1839]: (upowerd:1839): UPower-Linux-WARNING **: energy_full (2278,799061) is greater than energy_full_design (1523,996166)
Mar  4 16:24:16 debian PackageKit: get-updates transaction /175_acedddac from uid 1000 finished with success after 6230ms
Mar  4 16:24:27 debian systemd[1]: Starting Synchronise Hardware Clock to System Clock...
Mar  4 16:24:27 debian systemd[1]: Stopping Session 1 of user szelma.
Mar  4 16:24:27 debian systemd[1]: Stopping Sound Card.
Mar  4 16:24:27 debian systemd[1]: Stopped target Sound Card.
Mar  4 16:24:27 debian systemd[1]: Stopping PackageKit Daemon...
Mar  4 16:24:27 debian systemd[1]: Stopping Bluetooth service...
Mar  4 16:24:27 debian bluetoothd[2866]: Terminating
Mar  4 16:24:27 debian systemd[1]: Stopping RealtimeKit Scheduling Policy Service...
Mar  4 16:24:27 debian bluetoothd[2866]: Stopping SDP server
Mar  4 16:24:27 debian bluetoothd[2866]: Exit
Mar  4 16:24:27 debian systemd[1]: Stopping Disk Manager...
Mar  4 16:24:27 debian systemd[1]: Stopping Daemon for power management...
Mar  4 16:24:27 debian systemd[1]: Stopping User Manager for UID 1000...
Mar  4 16:24:27 debian systemd[1]: Stopping Authenticate and Authorize Users to Run Privileged Tasks...
Mar  4 16:24:27 debian systemd[1]: Stopping Graphical Interface.
Mar  4 16:24:27 debian systemd[1]: Stopped target Graphical Interface.
Mar  4 16:24:27 debian systemd[1]: Stopping Multi-User System.
Mar  4 16:24:27 debian systemd[1]: Stopped target Multi-User System.
Mar  4 16:24:27 debian systemd[1]: Stopping OpenVPN service...
Mar  4 16:24:27 debian systemd[1]: Stopped OpenVPN service.
Mar  4 16:24:27 debian ModemManager[459]: <info>  Caught signal, shutting down...
Mar  4 16:24:27 debian avahi-daemon[460]: Got SIGTERM, quitting.
Mar  4 16:24:27 debian avahi-daemon[460]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21d:92ff:fe50:2a47.
Mar  4 16:24:27 debian avahi-daemon[460]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.11.
Mar  4 16:24:27 debian avahi-daemon[460]: avahi-daemon 0.6.31 exiting.
Mar  4 16:24:27 debian NetworkManager[462]: <info> ModemManager disappeared from bus
Mar  4 16:24:27 debian ModemManager[459]: <info>  ModemManager is shut down
Mar  4 16:24:27 debian systemd[1]: Stopping Modem Manager...
Mar  4 16:24:27 debian systemd[1]: Stopping Avahi mDNS/DNS-SD Stack...
Mar  4 16:24:27 debian systemd[1]: Stopping Initialize hardware monitoring sensors...
Mar  4 16:24:27 debian systemd[1]: Stopped Initialize hardware monitoring sensors.
Mar  4 16:24:27 debian kdm: :0[1602]: Reset script returned non-zero exit code
Mar  4 16:24:27 debian NetworkManager[462]: <info> caught signal 15, shutting down normally.
Mar  4 16:24:27 debian NetworkManager[462]: <info> (wlan0): device state change: unavailable -> unmanaged (reason 'removed') [20 10 36]
Mar  4 16:26:13 debian systemd-modules-load[169]: Inserted module 'fuse'

kdm.log.1

Kod: Zaznacz cały

X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux debian 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.13-1~bpo8+1 (2017-02-27) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-0.bpo.2-amd64 root=UUID=2272b379-d45b-4986-93c0-7bd3527c0a13 ro quiet
Build Date: 11 February 2015  12:32:02AM
xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
Current version of pixman: 0.32.6
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar  3 22:05:35 2017
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 148: Having multiple values in <test> isn't supported and may not work as expected
Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 160: Having multiple values in <test> isn't supported and may not work as expected
Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 148: Having multiple values in <test> isn't supported and may not work as expected
Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 160: Having multiple values in <test> isn't supported and may not work as expected
(EE) Server terminated successfully (0). Closing log file.

X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux debian 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.13-1~bpo8+1 (2017-02-27) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-0.bpo.2-amd64 root=UUID=2272b379-d45b-4986-93c0-7bd3527c0a13 ro quiet
Build Date: 11 February 2015  12:32:02AM
xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
Current version of pixman: 0.32.6
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar  4 01:15:19 2017
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 148: Having multiple values in <test> isn't supported and may not work as expected
Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 160: Having multiple values in <test> isn't supported and may not work as expected
Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 148: Having multiple values in <test> isn't supported and may not work as expected
Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 160: Having multiple values in <test> isn't supported and may not work as expected

edit. Kłopoty z zasilaniem.Padnięta bateria od lat siedzi w laptopie,który jest cały czas podłączony do sieci.Bateria full,komputer się uśpił.Wybudzam go bateria 0 i tak jakby nie był podłączony do sieci,cokolwiek zrobię to się usypia.Chyba ją całkiem wyjmę

Pokaż jeszcze logi /var/log/messages

Ja też używam Steam na amd64, co prawda sporadycznie, ale nie zauważyłem problemów.

messeges

Kod: Zaznacz cały

Mar  4 16:31:50 debian kernel: [    1.408276] firewire_core 0000:01:04.0: created device fw0: GUID 00dc1000e4563701, S400
Mar  4 16:31:50 debian kernel: [    1.640044] usb 4-1: new full-speed USB device number 2 using uhci_hcd
Mar  4 16:31:50 debian kernel: [    1.641366] psmouse serio4: elantech: assuming hardware version 1 (with firmware version 0x010021)
Mar  4 16:31:50 debian kernel: [    1.669079] psmouse serio4: elantech: Synaptics capabilities query result 0x02, 0x02, 0x64.
Mar  4 16:31:50 debian kernel: [    1.672075] usb 2-1.1: new low-speed USB device number 4 using ehci-pci
Mar  4 16:31:50 debian kernel: [    1.728025] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa1dce680a, max_idle_ns: 440795246482 ns
Mar  4 16:31:50 debian kernel: [    1.743495] ata4: SATA link down (SStatus 0 SControl 300)
Mar  4 16:31:50 debian kernel: [    1.805054] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c30e
Mar  4 16:31:50 debian kernel: [    1.805058] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar  4 16:31:50 debian kernel: [    1.805061] usb 2-1.1: Product: HID compliant keyboard
Mar  4 16:31:50 debian kernel: [    1.805064] usb 2-1.1: Manufacturer: Logitech
Mar  4 16:31:50 debian kernel: [    1.808123] hidraw: raw HID events driver (C) Jiri Kosina
Mar  4 16:31:50 debian kernel: [    1.827118] usb 4-1: New USB device found, idVendor=0458, idProduct=0156
Mar  4 16:31:50 debian kernel: [    1.827122] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar  4 16:31:50 debian kernel: [    1.827125] usb 4-1: Product: Energy Mouse
Mar  4 16:31:50 debian kernel: [    1.827128] usb 4-1: Manufacturer: Genius
Mar  4 16:31:50 debian kernel: [    1.842580] usbcore: registered new interface driver usbhid
Mar  4 16:31:50 debian kernel: [    1.842581] usbhid: USB HID core driver
Mar  4 16:31:50 debian kernel: [    1.843504] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.7/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C30E.0001/input/input9
Mar  4 16:31:50 debian kernel: [    1.871577] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
Mar  4 16:31:50 debian kernel: [    1.900375] hid-generic 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.7-1.1/input0
Mar  4 16:31:50 debian kernel: [    1.903089] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.7/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C30E.0002/input/input10
Mar  4 16:31:50 debian kernel: [    1.960177] hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.7-1.1/input1
Mar  4 16:31:50 debian kernel: [    1.960945] input: Genius Energy Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:0458:0156.0003/input/input11
Mar  4 16:31:50 debian kernel: [    2.020531] hid-generic 0003:0458:0156.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Genius Energy Mouse] on usb-0000:00:1a.1-1/input0
Mar  4 16:31:50 debian kernel: [    2.060022] ata5: SATA link down (SStatus 0 SControl 300)
Mar  4 16:31:50 debian kernel: [    2.078691] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Mar  4 16:31:50 debian kernel: [    2.078694] cdrom: Uniform CD-ROM driver Revision: 3.20
Mar  4 16:31:50 debian kernel: [    2.079456] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Mar  4 16:31:50 debian kernel: [    2.079458] sd 2:0:0:0: [sda] 4096-byte physical blocks
Mar  4 16:31:50 debian kernel: [    2.079511] sd 2:0:0:0: [sda] Write Protect is off
Mar  4 16:31:50 debian kernel: [    2.079532] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  4 16:31:50 debian kernel: [    2.079641] sr 0:0:0:0: Attached scsi generic sg0 type 5
Mar  4 16:31:50 debian kernel: [    2.079691] sd 2:0:0:0: Attached scsi generic sg1 type 0
Mar  4 16:31:50 debian kernel: [    2.133593]  sda: sda1 sda2 sda3 sda4
Mar  4 16:31:50 debian kernel: [    2.134316] sd 2:0:0:0: [sda] Attached SCSI disk
Mar  4 16:31:50 debian kernel: [   12.258148] hid-generic 0003:0458:0156.0004: timeout initializing reports
Mar  4 16:31:50 debian kernel: [   12.258301] input: Genius Energy Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:0458:0156.0004/input/input12
Mar  4 16:31:50 debian kernel: [   12.258399] hid-generic 0003:0458:0156.0004: input,hidraw3: USB HID v1.10 Device [Genius Energy Mouse] on usb-0000:00:1a.1-1/input1
Mar  4 16:31:50 debian kernel: [   12.270127] PM: Starting manual resume from disk
Mar  4 16:31:50 debian kernel: [   12.688411] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Mar  4 16:31:50 debian kernel: [   13.977875] random: crng init done
Mar  4 16:31:50 debian kernel: [   14.255136] fuse init (API version 7.26)
Mar  4 16:31:50 debian kernel: [   15.661329] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Mar  4 16:31:50 debian kernel: [   15.679409] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0D:00/input/input13
Mar  4 16:31:50 debian kernel: [   15.679718] ACPI: Lid Switch [LID0]
Mar  4 16:31:50 debian kernel: [   15.679848] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input14
Mar  4 16:31:50 debian kernel: [   15.679852] ACPI: Power Button [PWRB]
Mar  4 16:31:50 debian kernel: [   15.679920] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
Mar  4 16:31:50 debian kernel: [   15.679923] ACPI: Power Button [PWRF]
Mar  4 16:31:50 debian kernel: [   15.751812] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar  4 16:31:50 debian kernel: [   15.840159] ACPI: Battery Slot [BAT1] (battery present)
Mar  4 16:31:50 debian kernel: [   15.880786] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Mar  4 16:31:50 debian kernel: [   15.881091] ACPI: AC Adapter [ADP1] (on-line)
Mar  4 16:31:50 debian kernel: [   15.882351] acpi device:0f: registered as cooling_device2
Mar  4 16:31:50 debian kernel: [   15.882433] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:00/input/input16
Mar  4 16:31:50 debian kernel: [   15.884714] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
Mar  4 16:31:50 debian kernel: [   15.884716] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
Mar  4 16:31:50 debian kernel: [   15.885639] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
Mar  4 16:31:50 debian kernel: [   15.885641] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
Mar  4 16:31:50 debian kernel: [   16.154006] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
Mar  4 16:31:50 debian kernel: [   16.226041] input: PC Speaker as /devices/platform/pcspkr/input/input17
Mar  4 16:31:50 debian kernel: [   16.276210] [drm] Initialized
Mar  4 16:31:50 debian kernel: [   16.298869] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
Mar  4 16:31:50 debian kernel: [   16.298871] iwl4965: Copyright(c) 2003-2011 Intel Corporation
Mar  4 16:31:50 debian kernel: [   16.298938] iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
Mar  4 16:31:50 debian kernel: [   16.299104] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
Mar  4 16:31:50 debian kernel: [   16.341746] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
Mar  4 16:31:50 debian kernel: [   16.342413] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
Mar  4 16:31:50 debian kernel: [   16.421308] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.P0P4.PMIO) (20160831/utaddress-247)
Mar  4 16:31:50 debian kernel: [   16.421316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar  4 16:31:50 debian kernel: [   16.421360] lpc_ich: Resource conflict(s) found affecting gpio_ich
Mar  4 16:31:50 debian kernel: [   16.483362] iTCO_vendor_support: vendor-support=0
Mar  4 16:31:50 debian kernel: [   16.483904] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Mar  4 16:31:50 debian kernel: [   16.483972] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
Mar  4 16:31:50 debian kernel: [   16.484163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Mar  4 16:31:50 debian kernel: [   16.508312] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x598301f0
Mar  4 16:31:50 debian kernel: [   16.508743] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
Mar  4 16:31:50 debian kernel: [   16.508746] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Mar  4 16:31:50 debian kernel: [   16.508748] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
Mar  4 16:31:50 debian kernel: [   16.508749] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
Mar  4 16:31:50 debian kernel: [   16.508751] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
Mar  4 16:31:50 debian kernel: [   16.508753] snd_hda_codec_realtek hdaudioC0D0:    inputs:
Mar  4 16:31:50 debian kernel: [   16.508755] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
Mar  4 16:31:50 debian kernel: [   16.508757] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
Mar  4 16:31:50 debian kernel: [   16.508759] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
Mar  4 16:31:50 debian kernel: [   16.617193] intel_powerclamp: No package C-state available
Mar  4 16:31:50 debian kernel: [   16.660353] intel_powerclamp: No package C-state available
Mar  4 16:31:50 debian kernel: [   16.697341] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
Mar  4 16:31:50 debian kernel: [   16.698253] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
Mar  4 16:31:50 debian kernel: [   16.698344] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
Mar  4 16:31:50 debian kernel: [   16.698429] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
Mar  4 16:31:50 debian kernel: [   16.699400] iwl4965 0000:06:00.0: firmware: direct-loading firmware iwlwifi-4965-2.ucode
Mar  4 16:31:50 debian kernel: [   16.699407] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
Mar  4 16:31:50 debian kernel: [   17.641577] nvidia: loading out-of-tree module taints kernel.
Mar  4 16:31:50 debian kernel: [   17.641590] nvidia: module license 'NVIDIA' taints kernel.
Mar  4 16:31:50 debian kernel: [   17.641592] Disabling lock debugging due to kernel taint
Mar  4 16:31:50 debian kernel: [   17.662520] vgaarb: device changed decodes: PCI:0000:08:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Mar  4 16:31:50 debian kernel: [   17.662917] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:08:00.0 on minor 0
Mar  4 16:31:50 debian kernel: [   17.662927] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.101  Thu Dec  1 15:52:31 PST 2016
Mar  4 16:31:50 debian kernel: [   17.662928] 
Mar  4 16:31:50 debian kernel: [   18.143717] Adding 3906556k swap on /dev/sda3.  Priority:-1 extents:1 across:3906556k FS
Mar  4 16:31:50 debian kernel: [   18.772659] RPC: Registered named UNIX socket transport module.
Mar  4 16:31:50 debian kernel: [   18.772661] RPC: Registered udp transport module.
Mar  4 16:31:50 debian kernel: [   18.772662] RPC: Registered tcp transport module.
Mar  4 16:31:50 debian kernel: [   18.772662] RPC: Registered tcp NFSv4.1 backchannel transport module.
Mar  4 16:31:50 debian kernel: [   18.791074] FS-Cache: Loaded
Mar  4 16:31:50 debian kernel: [   18.819134] FS-Cache: Netfs 'nfs' registered for caching
Mar  4 16:31:50 debian kernel: [   18.829833] Installing knfsd (copyright (C) 1996 [email protected]).
Mar  4 16:31:50 debian rsyslogd-2007: action 'action 17' suspended, next retry is Sat Mar  4 16:32:20 2017 [try http://www.rsyslog.com/e/2007 ]
Mar  4 16:31:51 debian kernel: [   21.125397] r8169 0000:07:00.0 eth0: link down
Mar  4 16:31:51 debian kernel: [   21.125408] r8169 0000:07:00.0 eth0: link down
Mar  4 16:31:53 debian kernel: [   22.792108] r8169 0000:07:00.0 eth0: link up
Mar  4 16:32:17 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 16:32:28 debian org.kde.kuiserver[1800]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 16:32:28 debian org.kde.kuiserver[1800]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 16:32:28 debian org.kde.kuiserver[1800]: Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 148: Having multiple values in <test> isn't supported and may not work as expected
Mar  4 16:32:28 debian org.kde.kuiserver[1800]: Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 160: Having multiple values in <test> isn't supported and may not work as expected
Mar  4 16:32:29 debian kernel: [   58.432322] Bluetooth: Core ver 2.22
Mar  4 16:32:29 debian kernel: [   58.432345] NET: Registered protocol family 31
Mar  4 16:32:29 debian kernel: [   58.432346] Bluetooth: HCI device and connection manager initialized
Mar  4 16:32:29 debian kernel: [   58.432351] Bluetooth: HCI socket layer initialized
Mar  4 16:32:29 debian kernel: [   58.432354] Bluetooth: L2CAP socket layer initialized
Mar  4 16:32:29 debian kernel: [   58.432370] Bluetooth: SCO socket layer initialized
Mar  4 16:32:29 debian kernel: [   58.456174] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar  4 16:32:29 debian kernel: [   58.456177] Bluetooth: BNEP filters: protocol multicast
Mar  4 16:32:29 debian kernel: [   58.456184] Bluetooth: BNEP socket layer initialized
Mar  4 16:38:33 debian kernel: [  422.894985] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
Mar  4 16:42:02 debian kernel: [  631.415963] perf: interrupt took too long (3142 > 3128), lowering kernel.perf_event_max_sample_rate to 63500
Mar  4 16:48:48 debian kernel: [ 1037.953251] perf: interrupt took too long (3933 > 3927), lowering kernel.perf_event_max_sample_rate to 50750
Mar  4 17:05:54 debian kernel: [ 2063.681961] perf: interrupt took too long (4948 > 4916), lowering kernel.perf_event_max_sample_rate to 40250
Mar  4 18:05:52 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 18:08:19 debian org.a11y.Bus[1800]: Activating service name='org.a11y.atspi.Registry'
Mar  4 18:08:19 debian org.a11y.Bus[1800]: Successfully activated service 'org.a11y.atspi.Registry'
Mar  4 18:08:19 debian org.a11y.atspi.Registry[24578]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Mar  4 18:09:49 debian kernel: [ 5898.368230] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar  4 18:09:49 debian kernel: [ 5898.569224] PM: Syncing filesystems ... done.
Mar  4 18:10:07 debian kernel: [ 5900.100843] (NULL device *): firmware: direct-loading firmware iwlwifi-4965-2.ucode
Mar  4 18:10:07 debian kernel: [ 5900.100951] Freezing user space processes ... (elapsed 0.031 seconds) done.
Mar  4 18:10:07 debian kernel: [ 5900.132235] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar  4 18:10:07 debian kernel: [ 5900.133860] Suspending console(s) (use no_console_suspend to debug)
Mar  4 18:10:07 debian kernel: [ 5900.135403] sd 2:0:0:0: [sda] Synchronizing SCSI cache
Mar  4 18:10:07 debian kernel: [ 5900.135564] sd 2:0:0:0: [sda] Stopping disk
Mar  4 18:10:07 debian kernel: [ 5900.143571] ACPI : EC: event blocked
Mar  4 18:10:07 debian kernel: [ 5900.633409] PM: suspend of devices complete after 499.097 msecs
Mar  4 18:10:07 debian kernel: [ 5900.634136] PM: late suspend of devices complete after 0.721 msecs
Mar  4 18:10:07 debian kernel: [ 5900.634535] ACPI : EC: interrupt blocked
Mar  4 18:10:07 debian kernel: [ 5900.634724] r8169 0000:07:00.0: System wakeup enabled by ACPI
Mar  4 18:10:07 debian kernel: [ 5900.652261] PM: noirq suspend of devices complete after 18.119 msecs
Mar  4 18:10:07 debian kernel: [ 5900.652930] ACPI: Preparing to enter system sleep state S3
Mar  4 18:10:07 debian kernel: [ 5900.653219] ACPI : EC: EC stopped
Mar  4 18:10:07 debian kernel: [ 5900.653221] PM: Saving platform NVS memory
Mar  4 18:10:07 debian kernel: [ 5900.653587] Disabling non-boot CPUs ...
Mar  4 18:10:07 debian kernel: [ 5900.653945] Broke affinity for irq 30
Mar  4 18:10:07 debian kernel: [ 5900.654995] smpboot: CPU 1 is now offline
Mar  4 18:10:07 debian kernel: [ 5900.655842] ACPI: Low-level resume complete
Mar  4 18:10:07 debian kernel: [ 5900.655842] ACPI : EC: EC started
Mar  4 18:10:07 debian kernel: [ 5900.655842] PM: Restoring platform NVS memory
Mar  4 18:10:07 debian kernel: [ 5900.655842] Suspended for 15.618 seconds
Mar  4 18:10:07 debian kernel: [ 5900.655842] Enabling non-boot CPUs ...
Mar  4 18:10:07 debian kernel: [ 5900.656136] x86: Booting SMP configuration:
Mar  4 18:10:07 debian kernel: [ 5900.656137] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar  4 18:10:07 debian kernel: [ 5900.656732]  cache: parent cpu1 should not be sleeping
Mar  4 18:10:07 debian kernel: [ 5900.657268] CPU1 is up
Mar  4 18:10:07 debian kernel: [ 5900.659193] ACPI: Waking up from system sleep state S3
Mar  4 18:10:07 debian kernel: [ 5900.727261] ACPI : EC: interrupt unblocked
Mar  4 18:10:07 debian kernel: [ 5900.744838] PM: noirq resume of devices complete after 17.736 msecs
Mar  4 18:10:07 debian kernel: [ 5900.745097] PM: early resume of devices complete after 0.209 msecs
Mar  4 18:10:07 debian kernel: [ 5900.745158] usb usb1: root hub lost power or was reset
Mar  4 18:10:07 debian kernel: [ 5900.745170] ACPI : EC: event unblocked
Mar  4 18:10:07 debian kernel: [ 5900.745210] usb usb4: root hub lost power or was reset
Mar  4 18:10:07 debian kernel: [ 5900.745420] usb usb5: root hub lost power or was reset
Mar  4 18:10:07 debian kernel: [ 5900.745475] usb usb6: root hub lost power or was reset
Mar  4 18:10:07 debian kernel: [ 5900.745541] usb usb7: root hub lost power or was reset
Mar  4 18:10:07 debian kernel: [ 5900.745690] r8169 0000:07:00.0: System wakeup disabled by ACPI
Mar  4 18:10:07 debian kernel: [ 5900.745729] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio.
Mar  4 18:10:07 debian kernel: [ 5900.748536] ACPI : button: The lid device is not compliant to SW_LID.
Mar  4 18:10:07 debian kernel: [ 5900.748613] rtc_cmos 00:01: System wakeup disabled by ACPI
Mar  4 18:10:07 debian kernel: [ 5900.760058] sd 2:0:0:0: [sda] Starting disk
Mar  4 18:10:07 debian kernel: [ 5900.804367] r8169 0000:07:00.0 eth0: link down
Mar  4 18:10:07 debian kernel: [ 5901.092055] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
Mar  4 18:10:07 debian kernel: [ 5901.094921] ata5: SATA link down (SStatus 0 SControl 300)
Mar  4 18:10:07 debian kernel: [ 5901.094958] ata4: SATA link down (SStatus 0 SControl 300)
Mar  4 18:10:07 debian kernel: [ 5901.263421] input input11: event field not found
Mar  4 18:10:07 debian kernel: [ 5901.263423] input input11: event field not found
Mar  4 18:10:07 debian kernel: [ 5901.263424] input input11: event field not found
Mar  4 18:10:07 debian kernel: [ 5901.312067] firewire_core 0000:01:04.0: rediscovered device fw0
Mar  4 18:10:07 debian kernel: [ 5901.562144] PM: resume of devices complete after 817.043 msecs
Mar  4 18:10:07 debian kernel: [ 5901.562528] Restarting tasks ... done.
Mar  4 18:10:07 debian kernel: [ 5901.596127] video LNXVIDEO:00: Restoring backlight state
Mar  4 18:10:08 debian kernel: [ 5901.883031] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar  4 18:10:08 debian kernel: [ 5902.128439] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
Mar  4 18:10:08 debian kernel: [ 5902.128443] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
Mar  4 18:10:08 debian kernel: [ 5902.168318] ata1.00: configured for UDMA/33
Mar  4 18:10:10 debian kernel: [ 5904.020054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar  4 18:10:10 debian kernel: [ 5904.022885] ata3.00: configured for UDMA/133
Mar  4 18:10:10 debian kernel: [ 5904.541882] r8169 0000:07:00.0 eth0: link down
Mar  4 18:10:10 debian kernel: [ 5904.542204] r8169 0000:07:00.0 eth0: link down
Mar  4 18:10:12 debian kernel: [ 5906.209751] r8169 0000:07:00.0 eth0: link up
Mar  4 18:10:31 debian kernel: [ 5925.440322] [Firmware Bug]: battery: (dis)charge rate invalid.
Mar  4 18:11:12 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 18:11:12 debian kernel: [ 5966.073748] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar  4 18:11:12 debian kernel: [ 5966.088496] PM: Syncing filesystems ... done.
Mar  4 18:11:21 debian kernel: [ 5967.346029] (NULL device *): firmware: direct-loading firmware iwlwifi-4965-2.ucode
Mar  4 18:11:21 debian kernel: [ 5967.346213] Freezing user space processes ... (elapsed 0.002 seconds) done.
Mar  4 18:11:21 debian kernel: [ 5967.348264] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar  4 18:11:21 debian kernel: [ 5967.349695] Suspending console(s) (use no_console_suspend to debug)
Mar  4 18:11:21 debian kernel: [ 5967.350364] sd 2:0:0:0: [sda] Synchronizing SCSI cache
Mar  4 18:11:21 debian kernel: [ 5967.350533] sd 2:0:0:0: [sda] Stopping disk
Mar  4 18:11:21 debian kernel: [ 5967.359702] ACPI : EC: event blocked
Mar  4 18:11:21 debian kernel: [ 5967.848552] PM: suspend of devices complete after 498.477 msecs
Mar  4 18:11:21 debian kernel: [ 5967.849081] PM: late suspend of devices complete after 0.524 msecs
Mar  4 18:11:21 debian kernel: [ 5967.849355] ACPI : EC: interrupt blocked
Mar  4 18:11:21 debian kernel: [ 5967.849783] r8169 0000:07:00.0: System wakeup enabled by ACPI
Mar  4 18:11:21 debian kernel: [ 5967.868219] PM: noirq suspend of devices complete after 19.134 msecs
Mar  4 18:11:21 debian kernel: [ 5967.868592] ACPI: Preparing to enter system sleep state S3
Mar  4 18:11:21 debian kernel: [ 5967.868782] ACPI : EC: EC stopped
Mar  4 18:11:21 debian kernel: [ 5967.868783] PM: Saving platform NVS memory
Mar  4 18:11:21 debian kernel: [ 5967.869053] Disabling non-boot CPUs ...
Mar  4 18:11:21 debian kernel: [ 5967.869361] Broke affinity for irq 30
Mar  4 18:11:21 debian kernel: [ 5967.870381] smpboot: CPU 1 is now offline
Mar  4 18:11:21 debian kernel: [ 5967.871074] ACPI: Low-level resume complete
Mar  4 18:11:21 debian kernel: [ 5967.871074] ACPI : EC: EC started
Mar  4 18:11:21 debian kernel: [ 5967.871074] PM: Restoring platform NVS memory
Mar  4 18:11:21 debian kernel: [ 5967.871074] Suspended for 6.784 seconds
Mar  4 18:11:21 debian kernel: [ 5967.871074] Enabling non-boot CPUs ...
Mar  4 18:11:21 debian kernel: [ 5967.871074] x86: Booting SMP configuration:
Mar  4 18:11:21 debian kernel: [ 5967.871074] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar  4 18:11:21 debian kernel: [ 5967.871933]  cache: parent cpu1 should not be sleeping
Mar  4 18:11:21 debian kernel: [ 5967.872515] CPU1 is up
Mar  4 18:11:21 debian kernel: [ 5967.874444] ACPI: Waking up from system sleep state S3
Mar  4 18:11:21 debian kernel: [ 5967.943726] ACPI : EC: interrupt unblocked
Mar  4 18:11:21 debian kernel: [ 5967.964829] PM: noirq resume of devices complete after 21.261 msecs
Mar  4 18:11:21 debian kernel: [ 5967.965072] PM: early resume of devices complete after 0.194 msecs
Mar  4 18:11:21 debian kernel: [ 5967.965144] ACPI : EC: event unblocked
Mar  4 18:11:21 debian kernel: [ 5967.965150] usb usb1: root hub lost power or was reset
Mar  4 18:11:21 debian kernel: [ 5967.965200] usb usb4: root hub lost power or was reset
Mar  4 18:11:21 debian kernel: [ 5967.965412] usb usb5: root hub lost power or was reset
Mar  4 18:11:21 debian kernel: [ 5967.965473] usb usb6: root hub lost power or was reset
Mar  4 18:11:21 debian kernel: [ 5967.965526] usb usb7: root hub lost power or was reset
Mar  4 18:11:21 debian kernel: [ 5967.967676] rtc_cmos 00:01: System wakeup disabled by ACPI
Mar  4 18:11:21 debian kernel: [ 5967.968377] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio.
Mar  4 18:11:21 debian kernel: [ 5967.968398] r8169 0000:07:00.0: System wakeup disabled by ACPI
Mar  4 18:11:21 debian kernel: [ 5967.972162] sd 2:0:0:0: [sda] Starting disk
Mar  4 18:11:21 debian kernel: [ 5968.024039] r8169 0000:07:00.0 eth0: link down
Mar  4 18:11:21 debian kernel: [ 5968.294780] ata4: SATA link down (SStatus 0 SControl 300)
Mar  4 18:11:21 debian kernel: [ 5968.294820] ata5: SATA link down (SStatus 0 SControl 300)
Mar  4 18:11:21 debian kernel: [ 5968.316051] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
Mar  4 18:11:21 debian kernel: [ 5968.488563] input input11: event field not found
Mar  4 18:11:21 debian kernel: [ 5968.488565] input input11: event field not found
Mar  4 18:11:21 debian kernel: [ 5968.488566] input input11: event field not found
Mar  4 18:11:21 debian kernel: [ 5968.544067] firewire_core 0000:01:04.0: rediscovered device fw0
Mar  4 18:11:21 debian kernel: [ 5968.781164] PM: resume of devices complete after 816.088 msecs
Mar  4 18:11:21 debian kernel: [ 5968.781547] Restarting tasks ... done.
Mar  4 18:11:21 debian kernel: [ 5968.807705] video LNXVIDEO:00: Restoring backlight state
Mar  4 18:11:22 debian kernel: [ 5969.061828] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar  4 18:11:22 debian kernel: [ 5969.352438] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
Mar  4 18:11:22 debian kernel: [ 5969.352442] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
Mar  4 18:11:22 debian kernel: [ 5969.392316] ata1.00: configured for UDMA/33
Mar  4 18:11:24 debian kernel: [ 5971.236084] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar  4 18:11:24 debian kernel: [ 5971.238980] ata3.00: configured for UDMA/133
Mar  4 18:11:24 debian kernel: [ 5971.729640] r8169 0000:07:00.0 eth0: link down
Mar  4 18:11:24 debian kernel: [ 5971.732172] r8169 0000:07:00.0 eth0: link down
Mar  4 18:11:26 debian kernel: [ 5973.396894] r8169 0000:07:00.0 eth0: link up
Mar  4 18:11:59 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 18:12:00 debian kernel: [ 6006.882257] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar  4 18:12:00 debian kernel: [ 6006.894912] PM: Syncing filesystems ... done.
Mar  4 18:12:05 debian kernel: [ 6008.170755] (NULL device *): firmware: direct-loading firmware iwlwifi-4965-2.ucode
Mar  4 18:12:05 debian kernel: [ 6008.170771] Freezing user space processes ... (elapsed 0.001 seconds) done.
Mar  4 18:12:05 debian kernel: [ 6008.172245] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar  4 18:12:05 debian kernel: [ 6008.173689] Suspending console(s) (use no_console_suspend to debug)
Mar  4 18:12:05 debian kernel: [ 6008.174878] sd 2:0:0:0: [sda] Synchronizing SCSI cache
Mar  4 18:12:05 debian kernel: [ 6008.175036] sd 2:0:0:0: [sda] Stopping disk
Mar  4 18:12:05 debian kernel: [ 6008.183264] ACPI : EC: event blocked
Mar  4 18:12:05 debian kernel: [ 6008.678311] PM: suspend of devices complete after 504.252 msecs
Mar  4 18:12:05 debian kernel: [ 6008.678846] PM: late suspend of devices complete after 0.531 msecs
Mar  4 18:12:05 debian kernel: [ 6008.679099] ACPI : EC: interrupt blocked
Mar  4 18:12:05 debian kernel: [ 6008.679537] r8169 0000:07:00.0: System wakeup enabled by ACPI
Mar  4 18:12:05 debian kernel: [ 6008.696216] PM: noirq suspend of devices complete after 17.366 msecs
Mar  4 18:12:05 debian kernel: [ 6008.696589] ACPI: Preparing to enter system sleep state S3
Mar  4 18:12:05 debian kernel: [ 6008.696773] ACPI : EC: EC stopped
Mar  4 18:12:05 debian kernel: [ 6008.696774] PM: Saving platform NVS memory
Mar  4 18:12:05 debian kernel: [ 6008.697038] Disabling non-boot CPUs ...
Mar  4 18:12:05 debian kernel: [ 6008.697344] Broke affinity for irq 30
Mar  4 18:12:05 debian kernel: [ 6008.698364] smpboot: CPU 1 is now offline
Mar  4 18:12:05 debian kernel: [ 6008.699071] ACPI: Low-level resume complete
Mar  4 18:12:05 debian kernel: [ 6008.699071] ACPI : EC: EC started
Mar  4 18:12:05 debian kernel: [ 6008.699071] PM: Restoring platform NVS memory
Mar  4 18:12:05 debian kernel: [ 6008.699071] Suspended for 3.172 seconds
Mar  4 18:12:05 debian kernel: [ 6008.699071] Enabling non-boot CPUs ...
Mar  4 18:12:05 debian kernel: [ 6008.699071] x86: Booting SMP configuration:
Mar  4 18:12:05 debian kernel: [ 6008.699071] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar  4 18:12:05 debian kernel: [ 6008.699946]  cache: parent cpu1 should not be sleeping
Mar  4 18:12:05 debian kernel: [ 6008.700519] CPU1 is up
Mar  4 18:12:05 debian kernel: [ 6008.702446] ACPI: Waking up from system sleep state S3
Mar  4 18:12:05 debian kernel: [ 6008.771322] ACPI : EC: interrupt unblocked
Mar  4 18:12:05 debian kernel: [ 6008.792197] PM: noirq resume of devices complete after 21.048 msecs
Mar  4 18:12:05 debian kernel: [ 6008.792499] PM: early resume of devices complete after 0.239 msecs
Mar  4 18:12:05 debian kernel: [ 6008.792576] usb usb1: root hub lost power or was reset
Mar  4 18:12:05 debian kernel: [ 6008.792576] ACPI : EC: event unblocked
Mar  4 18:12:05 debian kernel: [ 6008.792628] usb usb4: root hub lost power or was reset
Mar  4 18:12:05 debian kernel: [ 6008.792847] usb usb5: root hub lost power or was reset
Mar  4 18:12:05 debian kernel: [ 6008.792914] usb usb6: root hub lost power or was reset
Mar  4 18:12:05 debian kernel: [ 6008.793021] usb usb7: root hub lost power or was reset
Mar  4 18:12:05 debian kernel: [ 6008.793175] r8169 0000:07:00.0: System wakeup disabled by ACPI
Mar  4 18:12:05 debian kernel: [ 6008.793182] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio.
Mar  4 18:12:05 debian kernel: [ 6008.794653] rtc_cmos 00:01: System wakeup disabled by ACPI
Mar  4 18:12:05 debian kernel: [ 6008.799017] sd 2:0:0:0: [sda] Starting disk
Mar  4 18:12:05 debian kernel: [ 6008.851709] r8169 0000:07:00.0 eth0: link down
Mar  4 18:12:05 debian kernel: [ 6009.122845] ata4: SATA link down (SStatus 0 SControl 300)
Mar  4 18:12:05 debian kernel: [ 6009.122880] ata5: SATA link down (SStatus 0 SControl 300)
Mar  4 18:12:05 debian kernel: [ 6009.140062] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
Mar  4 18:12:05 debian kernel: [ 6009.313279] input input11: event field not found
Mar  4 18:12:05 debian kernel: [ 6009.313280] input input11: event field not found
Mar  4 18:12:05 debian kernel: [ 6009.313281] input input11: event field not found
Mar  4 18:12:05 debian kernel: [ 6009.609622] firewire_core 0000:01:04.0: rediscovered device fw0
Mar  4 18:12:05 debian kernel: [ 6009.609689] PM: resume of devices complete after 817.185 msecs
Mar  4 18:12:05 debian kernel: [ 6009.610072] Restarting tasks ... done.
Mar  4 18:12:06 debian kernel: [ 6009.760084] video LNXVIDEO:00: Restoring backlight state
Mar  4 18:12:06 debian kernel: [ 6010.010882] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar  4 18:12:06 debian kernel: [ 6010.172440] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
Mar  4 18:12:06 debian kernel: [ 6010.172443] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
Mar  4 18:12:06 debian kernel: [ 6010.212283] ata1.00: configured for UDMA/33
Mar  4 18:12:08 debian kernel: [ 6011.736075] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar  4 18:12:08 debian kernel: [ 6011.739161] ata3.00: configured for UDMA/133
Mar  4 18:12:08 debian kernel: [ 6012.253421] r8169 0000:07:00.0 eth0: link down
Mar  4 18:12:08 debian kernel: [ 6012.255232] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mar  4 18:12:08 debian kernel: [ 6012.256116] r8169 0000:07:00.0 eth0: link down
Mar  4 18:12:08 debian kernel: [ 6012.265621] PM: Syncing filesystems ... done.
Mar  4 18:12:13 debian kernel: [ 6013.419728] Freezing user space processes ... (elapsed 0.002 seconds) done.
Mar  4 18:12:13 debian kernel: [ 6013.421785] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar  4 18:12:13 debian kernel: [ 6013.423198] Suspending console(s) (use no_console_suspend to debug)
Mar  4 18:12:13 debian kernel: [ 6013.424097] sd 2:0:0:0: [sda] Synchronizing SCSI cache
Mar  4 18:12:13 debian kernel: [ 6013.424320] sd 2:0:0:0: [sda] Stopping disk
Mar  4 18:12:13 debian kernel: [ 6013.432731] ACPI : EC: event blocked
Mar  4 18:12:13 debian kernel: [ 6013.923760] PM: suspend of devices complete after 500.193 msecs
Mar  4 18:12:13 debian kernel: [ 6013.924290] PM: late suspend of devices complete after 0.525 msecs
Mar  4 18:12:13 debian kernel: [ 6013.924524] ACPI : EC: interrupt blocked
Mar  4 18:12:13 debian kernel: [ 6013.924951] r8169 0000:07:00.0: System wakeup enabled by ACPI
Mar  4 18:12:13 debian kernel: [ 6013.944208] PM: noirq suspend of devices complete after 19.915 msecs
Mar  4 18:12:13 debian kernel: [ 6013.944582] ACPI: Preparing to enter system sleep state S3
Mar  4 18:12:13 debian kernel: [ 6013.944765] ACPI : EC: EC stopped
Mar  4 18:12:13 debian kernel: [ 6013.944765] PM: Saving platform NVS memory
Mar  4 18:12:13 debian kernel: [ 6013.945026] Disabling non-boot CPUs ...
Mar  4 18:12:13 debian kernel: [ 6013.945336] Broke affinity for irq 30
Mar  4 18:12:13 debian kernel: [ 6013.946355] smpboot: CPU 1 is now offline
Mar  4 18:12:13 debian kernel: [ 6013.947053] ACPI: Low-level resume complete
Mar  4 18:12:13 debian kernel: [ 6013.947053] ACPI : EC: EC started
Mar  4 18:12:13 debian kernel: [ 6013.947053] PM: Restoring platform NVS memory
Mar  4 18:12:13 debian kernel: [ 6013.947053] Suspended for 2.752 seconds
Mar  4 18:12:13 debian kernel: [ 6013.947053] Enabling non-boot CPUs ...
Mar  4 18:12:13 debian kernel: [ 6013.947053] x86: Booting SMP configuration:
Mar  4 18:12:13 debian kernel: [ 6013.947053] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar  4 18:12:13 debian kernel: [ 6013.947907]  cache: parent cpu1 should not be sleeping
Mar  4 18:12:13 debian kernel: [ 6013.948484] CPU1 is up
Mar  4 18:12:13 debian kernel: [ 6013.950409] ACPI: Waking up from system sleep state S3
Mar  4 18:12:13 debian kernel: [ 6014.019975] ACPI : EC: interrupt unblocked
Mar  4 18:12:13 debian kernel: [ 6014.040695] PM: noirq resume of devices complete after 20.887 msecs
Mar  4 18:12:13 debian kernel: [ 6014.040939] PM: early resume of devices complete after 0.195 msecs
Mar  4 18:12:13 debian kernel: [ 6014.041014] ACPI : EC: event unblocked
Mar  4 18:12:13 debian kernel: [ 6014.041016] usb usb1: root hub lost power or was reset
Mar  4 18:12:13 debian kernel: [ 6014.041067] usb usb4: root hub lost power or was reset
Mar  4 18:12:13 debian kernel: [ 6014.041292] usb usb6: root hub lost power or was reset
Mar  4 18:12:13 debian kernel: [ 6014.041296] usb usb5: root hub lost power or was reset
Mar  4 18:12:13 debian kernel: [ 6014.041359] usb usb7: root hub lost power or was reset
Mar  4 18:12:13 debian kernel: [ 6014.041496] r8169 0000:07:00.0: System wakeup disabled by ACPI
Mar  4 18:12:13 debian kernel: [ 6014.041506] iwl4965 0000:06:00.0: RF_KILL bit toggled to disable radio.
Mar  4 18:12:13 debian kernel: [ 6014.045276] sd 2:0:0:0: [sda] Starting disk
Mar  4 18:12:13 debian kernel: [ 6014.045392] rtc_cmos 00:01: System wakeup disabled by ACPI
Mar  4 18:12:13 debian kernel: [ 6014.100393] r8169 0000:07:00.0 eth0: link down
Mar  4 18:12:13 debian kernel: [ 6014.382868] ata5: SATA link down (SStatus 0 SControl 300)
Mar  4 18:12:13 debian kernel: [ 6014.382908] ata4: SATA link down (SStatus 0 SControl 300)
Mar  4 18:12:13 debian kernel: [ 6014.388061] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
Mar  4 18:12:13 debian kernel: [ 6014.561548] input input11: event field not found
Mar  4 18:12:13 debian kernel: [ 6014.561549] input input11: event field not found
Mar  4 18:12:13 debian kernel: [ 6014.561550] input input11: event field not found
Mar  4 18:12:13 debian kernel: [ 6014.857470] firewire_core 0000:01:04.0: rediscovered device fw0
Mar  4 18:12:13 debian kernel: [ 6014.857535] PM: resume of devices complete after 816.591 msecs
Mar  4 18:12:13 debian kernel: [ 6014.857914] Restarting tasks ... done.
Mar  4 18:12:14 debian kernel: [ 6015.000424] video LNXVIDEO:00: Restoring backlight state
Mar  4 18:12:14 debian kernel: [ 6015.115018] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar  4 18:12:14 debian kernel: [ 6015.129370] r8169 0000:07:00.0 eth0: link down
Mar  4 18:12:14 debian kernel: [ 6015.410793] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
Mar  4 18:12:14 debian kernel: [ 6015.410796] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
Mar  4 18:12:14 debian kernel: [ 6015.456348] ata1.00: configured for UDMA/33
Mar  4 18:12:15 debian kernel: [ 6016.784113] r8169 0000:07:00.0 eth0: link up
Mar  4 18:12:16 debian kernel: [ 6016.952044] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar  4 18:12:16 debian kernel: [ 6016.955718] ata3.00: configured for UDMA/133
Mar  4 18:13:00 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 18:16:12 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 18:16:31 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 18:18:19 debian kernel: [ 6379.955257] CE: hpet increased min_delta_ns to 20115 nsec
Mar  4 18:19:55 debian kernel: [ 6475.971273] CE: hpet increased min_delta_ns to 30172 nsec
Mar  4 18:26:20 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 18:28:07 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 18:31:51 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.

chyba głównym problemem będzie bateria.Teraz np. jest rozładowana i nie widać,ze lapek podłączony jest do sieci a jest ... juz pokazuje ,że jest podłączony heheh

steam działa ale playonlinux coś nie domaga ,nie widzi steam

Za świeże logi, starsze są w /var/log/messages.*
Pokaż takie, które są z okresu gdy laptop sprawiał tytułowe problemy.

ostatnia linia tego fragmentu loga wskazuje na baterię

Kod: Zaznacz cały

Mar  4 14:49:14 debian kernel: [    0.762853] rtc_cmos 00:01: setting system clock to 2017-03-04 13:48:55 UTC (1488635335)
Mar  4 14:49:14 debian kernel: [    0.764710] Freeing unused kernel memory: 1396K (ffffffff9072d000 - ffffffff9088a000)
Mar  4 14:49:14 debian kernel: [    0.764712] Write protecting the kernel read-only data: 12288k
Mar  4 14:49:14 debian kernel: [    0.765951] Freeing unused kernel memory: 2032K (ffff9dc4b9e04000 - ffff9dc4ba000000)
Mar  4 14:49:14 debian kernel: [    0.771293] Freeing unused kernel memory: 1244K (ffff9dc4ba2c9000 - ffff9dc4ba400000)
Mar  4 14:49:14 debian kernel: [    0.780493] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Mar  4 14:49:14 debian kernel: [    0.792851] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Mar  4 14:49:14 debian kernel: [    0.804276] usb_common: module verification failed: signature and/or required key missing - tainting kernel
Mar  4 14:49:14 debian kernel: [    0.806301] ACPI: bus type USB registered
Mar  4 14:49:14 debian kernel: [    0.806337] usbcore: registered new interface driver usbfs
Mar  4 14:49:14 debian kernel: [    0.806351] usbcore: registered new interface driver hub
Mar  4 14:49:14 debian kernel: [    0.811355] usbcore: registered new device driver usb
Mar  4 14:49:14 debian kernel: [    0.812356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar  4 14:49:14 debian kernel: [    0.812571] ehci-pci: EHCI PCI platform driver
Mar  4 14:49:14 debian kernel: [    0.812761] ehci-pci 0000:00:1a.7: EHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.812770] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
Mar  4 14:49:14 debian kernel: [    0.812787] ehci-pci 0000:00:1a.7: debug port 1
Mar  4 14:49:14 debian kernel: [    0.816128] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
Mar  4 14:49:14 debian kernel: [    0.816725] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfebfec00
Mar  4 14:49:14 debian kernel: [    0.817095] uhci_hcd: USB Universal Host Controller Interface driver
Mar  4 14:49:14 debian kernel: [    0.823711] thermal LNXTHERM:00: registered as thermal_zone0
Mar  4 14:49:14 debian kernel: [    0.823713] ACPI: Thermal Zone [THRM] (45 C)
Mar  4 14:49:14 debian kernel: [    0.824520] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Mar  4 14:49:14 debian kernel: [    0.824530] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
Mar  4 14:49:14 debian kernel: [    0.824994] r8169 0000:07:00.0 eth0: RTL8168b/8111b at 0xffffada000651000, 00:1d:92:50:2a:47, XID 18000000 IRQ 30
Mar  4 14:49:14 debian kernel: [    0.824996] r8169 0000:07:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
Mar  4 14:49:14 debian kernel: [    0.828169] SCSI subsystem initialized
Mar  4 14:49:14 debian kernel: [    0.831197] sdhci: Secure Digital Host Controller Interface driver
Mar  4 14:49:14 debian kernel: [    0.831198] sdhci: Copyright(c) Pierre Ossman
Mar  4 14:49:14 debian kernel: [    0.831666] sdhci-pci 0000:01:04.2: SDHCI controller found [1217:7120] (rev 1)
Mar  4 14:49:14 debian kernel: [    0.832177] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Mar  4 14:49:14 debian kernel: [    0.832259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mar  4 14:49:14 debian kernel: [    0.832261] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  4 14:49:14 debian kernel: [    0.832263] usb usb1: Product: EHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.832265] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
Mar  4 14:49:14 debian kernel: [    0.832266] usb usb1: SerialNumber: 0000:00:1a.7
Mar  4 14:49:14 debian kernel: [    0.832460] hub 1-0:1.0: USB hub found
Mar  4 14:49:14 debian kernel: [    0.832475] hub 1-0:1.0: 4 ports detected
Mar  4 14:49:14 debian kernel: [    0.832796] ehci-pci 0000:00:1d.7: EHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.832804] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
Mar  4 14:49:14 debian kernel: [    0.832818] ehci-pci 0000:00:1d.7: debug port 1
Mar  4 14:49:14 debian kernel: [    0.836912] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfebff000
Mar  4 14:49:14 debian kernel: [    0.841456] mmc0: SDHCI controller on PCI [0000:01:04.2] using PIO
Mar  4 14:49:14 debian kernel: [    0.852023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Mar  4 14:49:14 debian kernel: [    0.852088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Mar  4 14:49:14 debian kernel: [    0.852090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  4 14:49:14 debian kernel: [    0.852092] usb usb2: Product: EHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.852094] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
Mar  4 14:49:14 debian kernel: [    0.852095] usb usb2: SerialNumber: 0000:00:1d.7
Mar  4 14:49:14 debian kernel: [    0.852253] hub 2-0:1.0: USB hub found
Mar  4 14:49:14 debian kernel: [    0.852263] hub 2-0:1.0: 6 ports detected
Mar  4 14:49:14 debian kernel: [    0.852728] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.852736] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Mar  4 14:49:14 debian kernel: [    0.852744] uhci_hcd 0000:00:1a.0: detected 2 ports
Mar  4 14:49:14 debian kernel: [    0.852778] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d800
Mar  4 14:49:14 debian kernel: [    0.852851] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Mar  4 14:49:14 debian kernel: [    0.852853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  4 14:49:14 debian kernel: [    0.852855] usb usb3: Product: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.852857] usb usb3: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 uhci_hcd
Mar  4 14:49:14 debian kernel: [    0.852858] usb usb3: SerialNumber: 0000:00:1a.0
Mar  4 14:49:14 debian kernel: [    0.853006] hub 3-0:1.0: USB hub found
Mar  4 14:49:14 debian kernel: [    0.853015] hub 3-0:1.0: 2 ports detected
Mar  4 14:49:14 debian kernel: [    0.853236] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.853242] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Mar  4 14:49:14 debian kernel: [    0.853250] uhci_hcd 0000:00:1a.1: detected 2 ports
Mar  4 14:49:14 debian kernel: [    0.853279] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d480
Mar  4 14:49:14 debian kernel: [    0.853344] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Mar  4 14:49:14 debian kernel: [    0.853346] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  4 14:49:14 debian kernel: [    0.853348] usb usb4: Product: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.853349] usb usb4: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 uhci_hcd
Mar  4 14:49:14 debian kernel: [    0.853351] usb usb4: SerialNumber: 0000:00:1a.1
Mar  4 14:49:14 debian kernel: [    0.853497] hub 4-0:1.0: USB hub found
Mar  4 14:49:14 debian kernel: [    0.853505] hub 4-0:1.0: 2 ports detected
Mar  4 14:49:14 debian kernel: [    0.853729] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.853736] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Mar  4 14:49:14 debian kernel: [    0.853743] uhci_hcd 0000:00:1d.0: detected 2 ports
Mar  4 14:49:14 debian kernel: [    0.853766] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
Mar  4 14:49:14 debian kernel: [    0.853830] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Mar  4 14:49:14 debian kernel: [    0.853832] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  4 14:49:14 debian kernel: [    0.853833] usb usb5: Product: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.853835] usb usb5: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 uhci_hcd
Mar  4 14:49:14 debian kernel: [    0.853837] usb usb5: SerialNumber: 0000:00:1d.0
Mar  4 14:49:14 debian kernel: [    0.854127] hub 5-0:1.0: USB hub found
Mar  4 14:49:14 debian kernel: [    0.854136] hub 5-0:1.0: 2 ports detected
Mar  4 14:49:14 debian kernel: [    0.854340] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.854346] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Mar  4 14:49:14 debian kernel: [    0.854354] uhci_hcd 0000:00:1d.1: detected 2 ports
Mar  4 14:49:14 debian kernel: [    0.854382] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000dc00
Mar  4 14:49:14 debian kernel: [    0.854581] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Mar  4 14:49:14 debian kernel: [    0.854584] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  4 14:49:14 debian kernel: [    0.854585] usb usb6: Product: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.854587] usb usb6: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 uhci_hcd
Mar  4 14:49:14 debian kernel: [    0.854589] usb usb6: SerialNumber: 0000:00:1d.1
Mar  4 14:49:14 debian kernel: [    0.854732] hub 6-0:1.0: USB hub found
Mar  4 14:49:14 debian kernel: [    0.854740] hub 6-0:1.0: 2 ports detected
Mar  4 14:49:14 debian kernel: [    0.854942] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.854948] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Mar  4 14:49:14 debian kernel: [    0.854956] uhci_hcd 0000:00:1d.2: detected 2 ports
Mar  4 14:49:14 debian kernel: [    0.854978] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
Mar  4 14:49:14 debian kernel: [    0.855169] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Mar  4 14:49:14 debian kernel: [    0.855171] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  4 14:49:14 debian kernel: [    0.855173] usb usb7: Product: UHCI Host Controller
Mar  4 14:49:14 debian kernel: [    0.855174] usb usb7: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 uhci_hcd
Mar  4 14:49:14 debian kernel: [    0.855176] usb usb7: SerialNumber: 0000:00:1d.2
Mar  4 14:49:14 debian kernel: [    0.855323] hub 7-0:1.0: USB hub found
Mar  4 14:49:14 debian kernel: [    0.855332] hub 7-0:1.0: 2 ports detected
Mar  4 14:49:14 debian kernel: [    0.867352] scsi host0: ata_piix
Mar  4 14:49:14 debian kernel: [    0.867613] scsi host1: ata_piix
Mar  4 14:49:14 debian kernel: [    0.867690] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Mar  4 14:49:14 debian kernel: [    0.867692] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Mar  4 14:49:14 debian kernel: [    0.868084] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
Mar  4 14:49:14 debian kernel: [    0.868138] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
Mar  4 14:49:14 debian kernel: [    0.868140] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems 
Mar  4 14:49:14 debian kernel: [    0.892614] scsi host2: ahci
Mar  4 14:49:14 debian kernel: [    0.892769] scsi host3: ahci
Mar  4 14:49:14 debian kernel: [    0.892929] scsi host4: ahci
Mar  4 14:49:14 debian kernel: [    0.893016] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 31
Mar  4 14:49:14 debian kernel: [    0.893019] ata4: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 31
Mar  4 14:49:14 debian kernel: [    0.893021] ata5: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 31
Mar  4 14:49:14 debian kernel: [    0.900170] firewire_ohci 0000:01:04.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
Mar  4 14:49:14 debian kernel: [    1.030862] ata1.00: ATAPI: Optiarc DVD RW AD-7530B, NX02, max UDMA/33
Mar  4 14:49:14 debian kernel: [    1.054733] ata1.00: configured for UDMA/33
Mar  4 14:49:14 debian kernel: [    1.056962] scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7530B  NX02 PQ: 0 ANSI: 5
Mar  4 14:49:14 debian kernel: [    1.160129] usb 1-1: new high-speed USB device number 2 using ehci-pci
Mar  4 14:49:14 debian kernel: [    1.309032] random: fast init done
Mar  4 14:49:14 debian kernel: [    1.309806] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
Mar  4 14:49:14 debian kernel: [    1.309810] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Mar  4 14:49:14 debian kernel: [    1.309813] usb 1-1: Product: USB2.0 Hub
Mar  4 14:49:14 debian kernel: [    1.310329] hub 1-1:1.0: USB hub found
Mar  4 14:49:14 debian kernel: [    1.310686] hub 1-1:1.0: 4 ports detected
Mar  4 14:49:14 debian kernel: [    1.368115] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar  4 14:49:14 debian kernel: [    1.369342] ata3.00: ATA-8: HGST HTS721010A9E630, JB0OA3U0, max UDMA/133
Mar  4 14:49:14 debian kernel: [    1.369346] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Mar  4 14:49:14 debian kernel: [    1.370679] ata3.00: configured for UDMA/133
Mar  4 14:49:14 debian kernel: [    1.371016] scsi 2:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3U0 PQ: 0 ANSI: 5
Mar  4 14:49:14 debian kernel: [    1.408269] firewire_core 0000:01:04.0: created device fw0: GUID 00dc1000e4563701, S400
Mar  4 14:49:14 debian kernel: [    1.628048] usb 4-1: new full-speed USB device number 2 using uhci_hcd
Mar  4 14:49:14 debian kernel: [    1.632860] psmouse serio4: elantech: assuming hardware version 1 (with firmware version 0x010021)
Mar  4 14:49:14 debian kernel: [    1.660128] usb 1-1.1: new low-speed USB device number 4 using ehci-pci
Mar  4 14:49:14 debian kernel: [    1.660467] psmouse serio4: elantech: Synaptics capabilities query result 0x02, 0x02, 0x64.
Mar  4 14:49:14 debian kernel: [    1.696082] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa1d0711b3, max_idle_ns: 440795253485 ns
Mar  4 14:49:14 debian kernel: [    1.711516] ata4: SATA link down (SStatus 0 SControl 300)
Mar  4 14:49:14 debian kernel: [    1.792938] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c30e
Mar  4 14:49:14 debian kernel: [    1.792942] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar  4 14:49:14 debian kernel: [    1.792945] usb 1-1.1: Product: HID compliant keyboard
Mar  4 14:49:14 debian kernel: [    1.792948] usb 1-1.1: Manufacturer: Logitech
Mar  4 14:49:14 debian kernel: [    1.795708] hidraw: raw HID events driver (C) Jiri Kosina
Mar  4 14:49:14 debian kernel: [    1.811166] usb 4-1: New USB device found, idVendor=0458, idProduct=0156
Mar  4 14:49:14 debian kernel: [    1.811170] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar  4 14:49:14 debian kernel: [    1.811174] usb 4-1: Product: Energy Mouse
Mar  4 14:49:14 debian kernel: [    1.811177] usb 4-1: Manufacturer: Genius
Mar  4 14:49:14 debian kernel: [    1.825625] usbcore: registered new interface driver usbhid
Mar  4 14:49:14 debian kernel: [    1.825626] usbhid: USB HID core driver
Mar  4 14:49:14 debian kernel: [    1.826415] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C30E.0001/input/input9
Mar  4 14:49:14 debian kernel: [    1.862209] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
Mar  4 14:49:14 debian kernel: [    1.884416] hid-generic 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.7-1.1/input0
Mar  4 14:49:14 debian kernel: [    1.887217] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C30E.0002/input/input10
Mar  4 14:49:14 debian kernel: [    1.944230] hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.7-1.1/input1
Mar  4 14:49:14 debian kernel: [    1.945015] input: Genius Energy Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:0458:0156.0003/input/input11
Mar  4 14:49:14 debian kernel: [    2.004540] hid-generic 0003:0458:0156.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Genius Energy Mouse] on usb-0000:00:1a.1-1/input0
Mar  4 14:49:14 debian kernel: [    2.028249] ata5: SATA link down (SStatus 0 SControl 300)
Mar  4 14:49:14 debian kernel: [    2.031186] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Mar  4 14:49:14 debian kernel: [    2.031189] sd 2:0:0:0: [sda] 4096-byte physical blocks
Mar  4 14:49:14 debian kernel: [    2.031265] sd 2:0:0:0: [sda] Write Protect is off
Mar  4 14:49:14 debian kernel: [    2.031295] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  4 14:49:14 debian kernel: [    2.054867] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Mar  4 14:49:14 debian kernel: [    2.054869] cdrom: Uniform CD-ROM driver Revision: 3.20
Mar  4 14:49:14 debian kernel: [    2.055997] sr 0:0:0:0: Attached scsi generic sg0 type 5
Mar  4 14:49:14 debian kernel: [    2.056059] sd 2:0:0:0: Attached scsi generic sg1 type 0
Mar  4 14:49:14 debian kernel: [    2.627604]  sda: sda1 sda2 sda3 sda4
Mar  4 14:49:14 debian kernel: [    2.628350] sd 2:0:0:0: [sda] Attached SCSI disk
Mar  4 14:49:14 debian kernel: [   12.258181] hid-generic 0003:0458:0156.0004: timeout initializing reports
Mar  4 14:49:14 debian kernel: [   12.258335] input: Genius Energy Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:0458:0156.0004/input/input12
Mar  4 14:49:14 debian kernel: [   12.258432] hid-generic 0003:0458:0156.0004: input,hidraw3: USB HID v1.10 Device [Genius Energy Mouse] on usb-0000:00:1a.1-1/input1
Mar  4 14:49:14 debian kernel: [   12.270011] PM: Starting manual resume from disk
Mar  4 14:49:14 debian kernel: [   12.705242] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Mar  4 14:49:14 debian kernel: [   14.086704] random: crng init done
Mar  4 14:49:14 debian kernel: [   14.249241] fuse init (API version 7.26)
Mar  4 14:49:14 debian kernel: [   15.681563] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/PNP0C09:00/PNP0C0D:00/input/input13
Mar  4 14:49:14 debian kernel: [   15.681867] ACPI: Lid Switch [LID0]
Mar  4 14:49:14 debian kernel: [   15.681972] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input14
Mar  4 14:49:14 debian kernel: [   15.681975] ACPI: Power Button [PWRB]
Mar  4 14:49:14 debian kernel: [   15.682040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
Mar  4 14:49:14 debian kernel: [   15.682042] ACPI: Power Button [PWRF]
Mar  4 14:49:14 debian kernel: [   15.781502] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
Mar  4 14:49:14 debian kernel: [   15.787573] acpi device:0f: registered as cooling_device2
Mar  4 14:49:14 debian kernel: [   15.787654] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:00/input/input16
Mar  4 14:49:14 debian kernel: [   15.793826] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
Mar  4 14:49:14 debian kernel: [   15.793829] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
Mar  4 14:49:14 debian kernel: [   15.794752] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
Mar  4 14:49:14 debian kernel: [   15.794754] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
Mar  4 14:49:14 debian kernel: [   15.882349] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.P0P4.PMIO) (20160831/utaddress-247)
Mar  4 14:49:14 debian kernel: [   15.882356] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mar  4 14:49:14 debian kernel: [   15.882399] lpc_ich: Resource conflict(s) found affecting gpio_ich
Mar  4 14:49:14 debian kernel: [   15.892137] ACPI: Battery Slot [BAT1] (battery present)
Mar  4 14:49:14 debian kernel: [   15.892572] ACPI: AC Adapter [ADP1] (on-line)
Mar  4 14:49:14 debian kernel: [   15.912368] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar  4 14:49:14 debian kernel: [   15.989743] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
Mar  4 14:49:14 debian kernel: [   16.050858] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
Mar  4 14:49:14 debian kernel: [   16.050860] iwl4965: Copyright(c) 2003-2011 Intel Corporation
Mar  4 14:49:14 debian kernel: [   16.050926] iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
Mar  4 14:49:14 debian kernel: [   16.051101] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
Mar  4 14:49:14 debian kernel: [   16.060388] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x598301f0
Mar  4 14:49:14 debian kernel: [   16.060799] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
Mar  4 14:49:14 debian kernel: [   16.060801] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Mar  4 14:49:14 debian kernel: [   16.060803] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
Mar  4 14:49:14 debian kernel: [   16.060805] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
Mar  4 14:49:14 debian kernel: [   16.060807] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
Mar  4 14:49:14 debian kernel: [   16.060808] snd_hda_codec_realtek hdaudioC0D0:    inputs:
Mar  4 14:49:14 debian kernel: [   16.060810] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
Mar  4 14:49:14 debian kernel: [   16.060812] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
Mar  4 14:49:14 debian kernel: [   16.060814] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
Mar  4 14:49:14 debian kernel: [   16.094126] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
Mar  4 14:49:14 debian kernel: [   16.094204] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
Mar  4 14:49:14 debian kernel: [   16.126439] iwl4965 0000:06:00.0: firmware: direct-loading firmware iwlwifi-4965-2.ucode
Mar  4 14:49:14 debian kernel: [   16.126448] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
Mar  4 14:49:14 debian kernel: [   16.173950] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
Mar  4 14:49:14 debian kernel: [   16.175649] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
Mar  4 14:49:14 debian kernel: [   16.175699] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
Mar  4 14:49:14 debian kernel: [   16.175748] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
Mar  4 14:49:14 debian kernel: [   16.278382] input: PC Speaker as /devices/platform/pcspkr/input/input21
Mar  4 14:49:14 debian kernel: [   16.403600] [drm] Initialized
Mar  4 14:49:14 debian kernel: [   16.455366] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Mar  4 14:49:14 debian kernel: [   16.502445] iTCO_vendor_support: vendor-support=0
Mar  4 14:49:14 debian kernel: [   16.560316] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Mar  4 14:49:14 debian kernel: [   16.560439] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
Mar  4 14:49:14 debian kernel: [   16.560626] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Mar  4 14:49:14 debian kernel: [   16.820034] intel_powerclamp: No package C-state available
Mar  4 14:49:14 debian kernel: [   16.848459] intel_powerclamp: No package C-state available
Mar  4 14:49:14 debian kernel: [   17.250812] Adding 3906556k swap on /dev/sda3.  Priority:-1 extents:1 across:3906556k FS
Mar  4 14:49:14 debian kernel: [   17.718929] nvidia: loading out-of-tree module taints kernel.
Mar  4 14:49:14 debian kernel: [   17.718943] nvidia: module license 'NVIDIA' taints kernel.
Mar  4 14:49:14 debian kernel: [   17.718945] Disabling lock debugging due to kernel taint
Mar  4 14:49:14 debian kernel: [   17.739470] vgaarb: device changed decodes: PCI:0000:08:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Mar  4 14:49:14 debian kernel: [   17.740080] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:08:00.0 on minor 0
Mar  4 14:49:14 debian kernel: [   17.740090] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.101  Thu Dec  1 15:52:31 PST 2016
Mar  4 14:49:14 debian kernel: [   17.740091] 
Mar  4 14:49:14 debian kernel: [   18.741569] RPC: Registered named UNIX socket transport module.
Mar  4 14:49:14 debian kernel: [   18.741571] RPC: Registered udp transport module.
Mar  4 14:49:14 debian kernel: [   18.741572] RPC: Registered tcp transport module.
Mar  4 14:49:14 debian kernel: [   18.741573] RPC: Registered tcp NFSv4.1 backchannel transport module.
Mar  4 14:49:14 debian kernel: [   18.760141] FS-Cache: Loaded
Mar  4 14:49:14 debian kernel: [   18.788062] FS-Cache: Netfs 'nfs' registered for caching
Mar  4 14:49:14 debian kernel: [   18.798190] Installing knfsd (copyright (C) 1996 [email protected]).
Mar  4 14:49:14 debian rsyslogd-2007: action 'action 17' suspended, next retry is Sat Mar  4 14:49:44 2017 [try http://www.rsyslog.com/e/2007 ]
Mar  4 14:49:16 debian kernel: [   21.625427] r8169 0000:07:00.0 eth0: link down
Mar  4 14:49:16 debian kernel: [   21.625442] r8169 0000:07:00.0 eth0: link down
Mar  4 14:49:18 debian kernel: [   23.301370] r8169 0000:07:00.0 eth0: link up
Mar  4 14:49:42 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 14:49:52 debian org.kde.kuiserver[1782]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 14:49:52 debian org.kde.kuiserver[1782]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 14:49:52 debian org.kde.kuiserver[1782]: Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 148: Having multiple values in <test> isn't supported and may not work as expected
Mar  4 14:49:52 debian org.kde.kuiserver[1782]: Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 160: Having multiple values in <test> isn't supported and may not work as expected
Mar  4 14:49:53 debian kernel: [   58.618147] Bluetooth: Core ver 2.22
Mar  4 14:49:53 debian kernel: [   58.618169] NET: Registered protocol family 31
Mar  4 14:49:53 debian kernel: [   58.618170] Bluetooth: HCI device and connection manager initialized
Mar  4 14:49:53 debian kernel: [   58.618175] Bluetooth: HCI socket layer initialized
Mar  4 14:49:53 debian kernel: [   58.618178] Bluetooth: L2CAP socket layer initialized
Mar  4 14:49:53 debian kernel: [   58.618186] Bluetooth: SCO socket layer initialized
Mar  4 14:49:53 debian kernel: [   58.642064] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar  4 14:49:53 debian kernel: [   58.642068] Bluetooth: BNEP filters: protocol multicast
Mar  4 14:49:53 debian kernel: [   58.642075] Bluetooth: BNEP socket layer initialized
Mar  4 14:50:50 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 14:51:31 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 14:51:53 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 14:52:09 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 14:52:26 debian org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 14:54:57 debian kernel: [  362.598487] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
Mar  4 14:56:40 debian kernel: [  466.183990] perf: interrupt took too long (3174 > 3131), lowering kernel.perf_event_max_sample_rate to 63000
Mar  4 14:59:39 debian kernel: [  644.517218] perf: interrupt took too long (3972 > 3967), lowering kernel.perf_event_max_sample_rate to 50250
Mar  4 15:16:14 debian kernel: [ 1639.870475] perf: interrupt took too long (4974 > 4965), lowering kernel.perf_event_max_sample_rate to 40000
Mar  4 15:19:48 debian org.freedesktop.PackageKit[1782]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 15:19:48 debian org.freedesktop.PackageKit[1782]: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Mar  4 15:19:48 debian org.freedesktop.PackageKit[1782]: Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 148: Having multiple values in <test> isn't supported and may not work as expected
Mar  4 15:19:48 debian org.freedesktop.PackageKit[1782]: Fontconfig warning: "/etc/fonts/infinality/conf.d/41-repl-os-win.conf", line 160: Having multiple values in <test> isn't supported and may not work as expected
Mar  4 15:20:09 debian org.freedesktop.PackageKit[1782]: PkSession(19568) PkStrings::infoPresent: info unrecognised: 1
Mar  4 15:20:09 debian org.freedesktop.PackageKit[1782]: I/O warning : failed to load external entity "/usr/share/app-info/categories.xml"
Mar  4 15:20:09 debian org.freedesktop.PackageKit[1782]: ** (process:19568): WARNING **: Exception: Couldn't stat '/var/cache/app-info/xapian'
Mar  4 15:20:09 debian org.freedesktop.PackageKit[1782]: Unable to open AppStream Xapian database!
Mar  4 15:20:09 debian org.freedesktop.PackageKit[1782]: void PackageModel::finished() QObject(0x0)  QObject(0x0)
Mar  4 15:20:16 debian org.freedesktop.PackageKit[1782]: void PackageModel::finished() QObject(0x0)  QObject(0x0)
Mar  4 15:25:24 debian kernel: [ 2190.112275] [Firmware Bug]: battery: (dis)charge rate invalid.

to jeszcze w oczy mi się rzuciło:

Kod: Zaznacz cały

15.875097] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.P0P4.PMIO) (20160831/utaddress-247)
Mar  4 21:31:20 debian kernel: [   15.875105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

jakiś konflikt sterownika ACPI

łopatologicznie mógłbym powiedzieć,że ch...wa matematyka obliczania ładowania i rozładowywania baterii.Teraz akurat bateria jest na 0% przed paroma minutami pokazywało,że baterii nie ma w ogóle a tylko na prądzie z sieci

Tak to wygląda, że to bateria.
Może spróbuj zaktualizować BIOS.

myślałem o tym,trochę się obawiam.Różnie może być a nie chciałbym uwalić płyty.W biosie nie mam opcji update trzeba by inną metodą.Bios jest pod xp i vistę na stronie msi.Przeglądałem trochę google na ten temat i ludzie miewali problemy z aktualizacją.

No faktycznie, genialne podejście MSI, żeby BIOS zaktualizować trzeba mieć system MS.
To tylko utwierdza mnie w niechęci do produktów tej firmy i jej serwisu (mam już wcześniejsze negatywne doświadczenia)

Na swoim przeszło 10-letnim lapku jakiś czas temu miałem podobny problem. Pokazywał się błąd baterii, tj. "bateria ma 29% pojemności i może być uszkodzona", a komputer potrafił wyłączyć się bez uprzedzenia. Też jadę na Jessie. Problem leżał nie po stronie baterii a jeszcze oryginalnego zasilacza, który podawał prąd jak mu się podobało. Nowy zasilacz i problemu nie ma. Polecam sprawdzić zasilacz. Jedyne co u mnie ucierpiało to zasilanie usb, które od tego czasu szwankuje, także lepiej tego nie odwlekać jak ja

Poza tym i baterią na granicy używalności teraz wszystko śmiga.

co z zasilaczem?
procesor się nie przegrzewa?
laptop wyczyszczony w środku z kurzu?
może płyta główna powoli siada?

Polskie Forum Użytkowników Debiana

[+]Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

[+]Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli

Re: Świeżo postawiony debian jessie wyłącza się podczas pracy w konsoli