Strona 1 z 1
MP-BIOS bug ???
: 26 lutego 2008, 13:57
autor: Dusty
Witam.
Czy ktos sie juz spotkal z czyms takim?
Kod: Zaznacz cały
..MP-BIOS bug: 8254 timer not connected to IO-APIC
PCI: Cannot allocate resource region 0 of device 0000:00:14.2
Wywala mi to zaraz na poczatku po starcie bootloadera i nie wiem czy to dobrze i nei wplywa na system czy zle i cos trzeba z tym zrobic. Pozdro.
: 26 lutego 2008, 18:18
autor: Maciek_Rutecki
Acer/Asus?
Wstaw w opcje jądra "noapic" jak to Ciebie stresuje :-)
: 26 lutego 2008, 20:37
autor: Dusty
HP ;-P
Juz wstawilem, dzieki
: 26 lutego 2008, 21:05
autor: Maciek_Rutecki
W HP taki krzak? Jaki model? Nowsze pavilony?
: 01 marca 2008, 21:33
autor: Dusty
Dokładnie jest to HP 6715b (GC049ES#AKD). To IO-APIC wyeliminowalem juz, ale zostaje jeszcze to:
Kod: Zaznacz cały
PCI: Cannot allocate resource region 0 of device 0000:00:14.2.
i jak dam:
Kod: Zaznacz cały
dusty@assasello:~$ lspci
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: ATI Technologies Inc Unknown device 7914
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 7915
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 02)
10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
30:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 02)
to smiem wnioskować, że chodzi o to:
Kod: Zaznacz cały
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
i za diabła nie wiem, co z tym zrobić. Pozdro.