kde4 - cmakekde - kompilacja
: 16 czerwca 2008, 12:10
Witam,
Probuje skompilowac kde4 z zrodel wg tej instrukcji link.
Szukalem pomocy na forum link, niestety nie znalazlem rozwiania.
Nie moge odpalic cmakekde
dodam informacje:
root@debian:/home/someone$ cat ~/.bashrc
po odpaleniu polecenia
dalej mam:
Co powinienem zrobic by skompilowac kde4?
Probuje skompilowac kde4 z zrodel wg tej instrukcji link.
Szukalem pomocy na forum link, niestety nie znalazlem rozwiania.
Nie moge odpalic cmakekde
Kod: Zaznacz cały
kde4@debian:~/kde/src/kdesupport$ cmakekde
bash: cmakekde: command not foundroot@debian:/home/someone$ cat ~/.bashrc
Kod: Zaznacz cały
###
## A script to setup some needed variables and functions for KDE 4 development.
## This should normally go in the ~/.bashrc file of your kde-devel user, so
## that it is executed when a session for that user is started.
##
## Example:
## su - kde-devel
## kwrite ~/.bashrc
## (then paste this file)
## exit
## su - kde-devel
##
## If you don't use a separate user, the first section with the
## environment variables should go into a separate file of course.
# KDE
export KDEDIR=$HOME/kde
export KDEHOME=$HOME/.kde4
export KDETMP=/tmp/$USER-kde4
mkdir -p $KDETMP
export KDEDIRS=$KDEDIR
export PKG_CONFIG_PATH=$KDEDIR/lib/pkgconfig:$PKG_CONFIG_PATH
# Qt
# only set Qt related variables if you compiled Qt on your own
# (which is discouraged). if you use the distro provided Qt, skip
# this section. Uncomment it if neccessary.
#export QTDIR=$HOME/qt-copy
#export QT_PLUGINS_DIR=$KDEDIR/lib/kde4/plugins:$QT_PLUGINS_DIR
#export PKG_CONFIG_PATH=$QTDIR/lib/pkgconfig:$PKG_CONFIG_PATH
# DBus
# only set DBUS related variables if you compiled dbus on your own
# (which is really discouraged). if you use the distro provided dbus,
# skip this variable. Uncomment it if neccessary.
#export DBUSDIR=$KDEDIR
#export PKG_CONFIG_PATH=$DBUSDIR/lib/pkgconfig:$PKG_CONFIG_PATH
# Other
# you might want to remove $PATH from the end of this line and add any
# essential items from your path - to make sure the your kde3 path isn't
# in here. Use the commented versions if you defined QTDIR above.
#export PATH=$KDEDIR/bin:$QTDIR/bin:/usr/local/bin:$PATH
#export LD_LIBRARY_PATH=$KDEDIR/lib:$QTDIR/lib:$LD_LIBRARY_PATH
export PATH=$KDEDIR/bin:/usr/local/bin:$PATH
export LD_LIBRARY_PATH=$KDEDIR/lib:$LD_LIBRARY_PATH
# only needed on some strange systems for compiling Qt. do not set
# it unless you have to.
#export YACC='byacc -d'
# XDG
unset XDG_DATA_DIRS # to avoid seeing kde3 files from /usr
unset XDG_CONFIG_DIRS
# build and src folders
# you might want to change these!
export KDE_BUILD=$HOME/kde/build
export KDE_SRC=$HOME/kde/src
# This will make the debug output prettier
export KDE_COLOR_DEBUG=1
export QTEST_COLORED=1
# Make
# Tell many scripts how to switch from source dir to build dir:
export OBJ_REPLACEMENT="s#$KDE_SRC#$KDE_BUILD#"
# Use makeobj instead of make, to automatically switch to the build dir.
# If you don't have makeobj, install the package named kdesdk-scripts or
# kdesdk, or check out kdesdk/scripts from svn, or just don't set the alias
# yet.
alias make=makeobj
##
# IMPORTANT! Uncomment the following lines if DBus does not work. DBus is not
# working if, when you run `dbus-uuidgen --ensure && qdbus`, you get an error.
#
# alias dbusstart="eval `PATH=$DBUSDIR/bin \
# $DBUSDIR/bin/dbus-launch --auto-syntax`"
##
# A function to easily build the current directory of KDE.
#
# This builds only the sources in the current ~/{src,build}/KDE subdirectory.
# Usage: cs KDE/kdebase && cmakekde
# will build/rebuild the sources in ~/src/KDE/kdebase
#
function cmakekde {
if test -n "$1"; then
# srcFolder is defined via command line argument
srcFolder="$1"
else
# get srcFolder for current dir
srcFolder=`pwd | sed -e s,$KDE_BUILD,$KDE_SRC,`
fi
# we are in the src folder, change to build directory
# Alternatively, we could just use makeobj in the commands below...
current=`pwd`
if [ "$srcFolder" = "$current" ]; then
cb
fi
# to enable tests, add -DKDE4_BUILD_TESTS=TRUE to the next line.
# you can also change "debugfull" to "debug" to save disk space.
# added "nice make..." to allow the user to work on the box while
# compiling
# Note: To speed up compiling, change 'make -j2' to 'make -jx',
# where x is your number of processors +1
cmake "$srcFolder" -GKDevelop3 -DCMAKE_INSTALL_PREFIX=$KDEDIR \
-DCMAKE_BUILD_TYPE=debugfull&& \
nice make -j2 && \
make install;
}
##
# for the lazy ones, add/comment other directories
function cmakekdeall {
cs kdesupport && svn up && cmakekde
cs KDE/kdelibs && svn up && cmakekde
cs KDE/kdepimlibs && svn up && cmakekde
cs KDE/kdebase && svn up && cmakekde
cs KDE/kdepim && svn up && cmakekde
cs KDE/kdegraphics && svn up && cmakekde
cs KDE/kdemultimedia && svn up && cmakekde
cs KDE/kdenetwork && svn up && cmakekde
cs KDE/kdeutils && svn up && cmakekde
}
##
# A function to easily change to the build directory.
# Usage: cb KDE/kdebase
# will change to $KDE_BUILD/KDE/kdebase
# Usage: cb
# will simply go to the build folder if you are currently in a src folder
# Example:
# $ pwd
# /home/user/src/KDE/kdebase
# $ cb && pwd
# /home/user/build/KDE/kdebase
#
function cb {
# Make sure build directory exists.
mkdir -p "$KDE_BUILD"
# command line argument
if test -n "$1"; then
cd "$KDE_BUILD/$1"
return
fi
# substitute src dir with build dir
dest=`pwd | sed -e s,$KDE_SRC,$KDE_BUILD,`
if test ! -d "$dest"; then
# build directory does not exist, create
mkdir -p "$dest"
fi
cd "$dest"
}
##
# Change to the source directory. Same as cb, except this
# switches to $KDE_SRC instead of $KDE_BUILD.
# Usage: cs KDE/kdebase
# will change to $KDE_SRC/KDE/kdebase
# Usage: cs
# will simply go to the source folder if you are currently in a build folder
# Example:
# $ pwd
# /home/user/build/KDE/kdebase
# $ cs && pwd
# /home/user/src/KDE/kdebase
#
function cs {
# Make sure source directory exists.
mkdir -p "$KDE_SRC"
# command line argument
if test -n "$1"; then
cd "$KDE_SRC/$1"
else
# substitute build dir with src dir
dest=`pwd | sed -e s,$KDE_BUILD,$KDE_SRC,`
current=`pwd`
if [ "$dest" = "$current" ]; then
cd "$KDE_SRC"
else
cd "$dest"
fi
fi
}
##
# Add autocompletion to cs function
#
function _cs_scandir
{
base=$1
ext=$2
if [ -d $base ]; then
for d in `ls $base`; do
if [ -d $base/$d ]; then
dirs="$dirs $ext$d/"
fi
done
fi
}
function _cs()
{
local cur dirs
_cs_scandir "$KDE_SRC"
_cs_scandir "$KDE_SRC/KDE" "KDE/"
COMPREPLY=()
cur="${COMP_WORDS[COMP_CWORD]}"
COMPREPLY=( $(compgen -W "${dirs}" -- ${cur}) )
}
# Remove comment on next line to enable cs autocompletion
#complete -F _cs cs
function start3app {
mkdir -p /tmp/$USER-kde
export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games
export LD_LIBRARY_PATH=
export KDETMP=/tmp/$USER-kde
export KDEVARTMP=/var/tmp/$USER-kde
export KDEHOME=$HOME/.kde
export KDEDIR=/usr
export KDEDIRS=$KDEDIR
export DISPLAY=:0
eval "$@"
source $HOME/.bashrc #Reset environment variables again
}Kod: Zaznacz cały
root@debian:/home/dawid$ source ~/.bashrcKod: Zaznacz cały
kde4@debian:~/kde/src/kdesupport$ cmakekde
bash: cmakekde: command not found
